an9333

No. AN9333
Intersil Data Acquisition
September 1993
Using the HI1386 Adapter Board
Description
How To Use
The HI1386 adapter is an adapter board for evaluation of the
HI1386 to be used in conjunction with the HI1396 Evaluation
Board.
Mount the HI1386 on the HI1386 adapter. Remove the
HI1396 mounted on the HI1396 Evaluation Board and insert
this adapter into the location on the HI1396 Evaluation
Board where then HI1396 had been mounted. Operating
conditions must meet the requirements of the HI1396 Evaluation Board operation.
Features
• Resolution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Bit
Components Used
• Max Operating Conversion . . . 75MSPS (Min. of HI1386)
• Capacitors . . . . . . . . . . . . . . . . . . . . 0.1µF Chip Capacitor
• Supplies . . . . . . . . . . . . . . . . . . . . . +5.0V, -5.2V and -2.0V
• IC Socket (to HI1386) . . . . . . . . . . . . Buried Socket, PD-7
(Made by Mac Eight)
• Two Type of Analog Inputs (Direct Input and Buffered
Input)
• Straight Tap Header . . . . . . . . . . . . . . . . . . PS-2010-F4S
(to HI1396 Evaluation Board)
(Made by Yamaichi)
• Sine Wave to ECL Conversion Circuit for CLK Input
• Adjusting Circuit for Reference Voltage of A/D Converter
Considerations for Operation
• CLK Divider Circuit (1/1 to 1/16)
NOTE: If the HI1396 Evaluation Board is used.
• The HI1386 is exclusively used with the HI1396 Evaluation
Board (HI1396 Evaluation Board with DAC). Not to be
used with any other type of evaluation board.
• Carefully align the position of pin #1. If mis-positioned, the
evaluation board itself or the HI1386 may be damaged.
• For the setup of the HI1396 Evaluation Board, refer to
specifications (AN9330) of HI1396 Evaluation Board.
Block Diagram
HI1386 ADAPTER
28
15
HI1396
HI1386
14
1
NOTE: All capacitors are 0.1µF
1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 1999
1
Application Note 9333
Pinout
HI1386 (PDIP)
TOP VIEW
LINV 1
28 AVEE
DVEE 2
27 VRT
DGND 3
26 AVEE
25 AGND
(LSB) D0 4
D1 5
24 VIN
D2 6
23 AGND
D3 7
22 VRM
D4 8
21 AGND
D5 9
20 VIN
D6 10
19 AGND
18 AVEE
(MSB) D7 11
DGND 12
17 VRB
DVEE 13
16 CLK
MINV 14
15 CLK
All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification.
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without
notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate
and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which
may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see web site http://www.intersil.com
2