RGP10A THRU RGP10M SINTERED GLASS PASSIVATED JUNCTION FAST RECOVERY RECTIFIER Reverse Voltage - 50 to 1000 Volts EEDD T T N N E E T T PPAA Forward Current - 1.0 Ampere DO-204AL FEATURES GPRC (Glass Passivated Rectifier Chip) inside Glass passivated cavity-free junction Capable of meeting environmental standards of MIL-S-19500 For use in high frequence rectifier circuits Fast switching for high efficiency o 1.0 Ampere operation at TA=55 C with no thermal runaway Typical IR less than 0.1uA o High temperature soldering guaranteed: 260 C/10 seconds, 0.375" (9.5mm) lead length, 5lbs. (2.3 kg) tension * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 1.0(25.4) MIN. * * * * * * * * 0.107(2.70) 1.0(25.4) MIN. 0.205(5.20) 0.160(4.10) 0.080(2.00) DIA. 0.034(0.86) MECHANICAL DATA 0.028(0.71) DIA. Case : JEDEC DO-204AL molded plastic over glass body Terminals : Tin Plated, solderable per MIL-STD-750, Method 2026 Polarity : Color band denotes cathode end Weight : 0.012 ounes , 0.3 gram *Dimensions in inches and (millimeters) TM MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS o Ratings at 25 C ambient temperature RGP10 SYMBOLS unless otherwise specified. UNITS A B D G J JA K KA M MA Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 600 800 800 1000 1000 Volts Maximum RMS voltage VRMS 35 70 140 280 420 420 560 560 700 700 Volts VDC 50 100 200 400 600 600 800 800 1000 1000 Volts Maximum DC blocking voltage Maximum average forward rectified current I (AV) 1.0 Amps IFSM 30 Amps VF 1.3 Volts IR 5 30 50 uA 0.375" (9.5mm) lead length (SEE FIG.1) Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage at 1.0 A o Maximum DC reverse current at rated DC blocking voltage TA=25 C o TA=125 C o TA=150 C Maximum reverse recovery time (NOTE 1) trr Typical junction capacitance (NOTE 2) CJ Typical thermal resistance (NOTE 3) Operating junction and storage temperature range R 150 JA TJ,TSTG 250 150 500 300 500 nS 300 pF 15 55 -65 to +175 o C/W o C NOTES : (1) Reverse recovery test condition : IF 0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead lengths, P.C.B. mounted. REV. 0 Zowie Technology Corporation RATINGS AND CHARACTERISTIC CURVES RGP10A THRU RGP10M FIG.1 - FORWARD CURRENT DERATING CURVE FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 30 60Hz RESISTIVE OR INDUCTIVE LOAD 1.25 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 1.50 1.00 0.75 0.50 0.25 0.375" (9.5mm) LEAD LENGTH 0 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 25 20 15 10 5 0 25 50 75 100 125 150 1 175 10 o AMBIENT TEMPERATURE, C FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4 - TYPICAL REVERSE CHARACTERISTICS 100 INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES 10.00 IINSTANTANEOUS FORWARD CURRENT, AMPERES 100 NUMBER OF CYCLES AT 60Hz PULSE WIDTH=300uS 1% DUTY CYCLE 1.00 0.10 10 o TJ = 150 C o TJ = 125 C 1 o TJ = 25 C 0.01 0.1 0.4 0.6 0.8 1.0 1.2 1.4 0 1.6 FIG.5 - TYPICAL JUNCTION CAPACITANCE TRANSIENT THERMAL IMPEDANCE( C/W) o JUNCTION CAPACITANCE, pF 60 80 100 110 FIG.6 - TYPICAL TRANSIENT THERMAL IMPEDANCE 200 TJ = 25 C 100 o 60 40 20 10 6 4 2 10 1 0.1 1 .1 .2 .4 1.0 2 4 10 REVERSE VOLTAGE, VOLTS REV. 0 40 PERCENT OF RATED PEAK REVERSE VOLTAGE,% INSTANTANEOUS FORWARD VOLTAGE, VOLTS 100 20 20 40 100 0.01 0.10 1.0 10 100 t , PULSE DURATION, sec Zowie Technology Corporation