Si photodiode S10625-01CT COB type, applicable to lead-free solder reflow The S10625-01CT is a Si photodiode for visible to near infrared range and is compatible with lead-free solder reflow processes. The small and thin leadless package allows reducing the mount area on a printed circuit board. Features Applications COB type Optical switches Small package: 3.2 × 2.7 × 1.1t mm Applicable to lead-free solder reflow Photosensitive area: 1.3 × 1.3 mm Structure Parameter Photosensitive area Package Seal material Specification 1.3 × 1.3 Glass epoxy Epoxy resin Unit mm - Absolute maximum ratings Parameter Reverse voltage Operating temperature Storage temperature Reflow soldering conditions*1 Symbol VR max Topr Tstg Tsol Condition Ta=25 °C Value 10 -25 to +85 -40 to +100 Peak temperature 240 °C max., 1 time (see page 5) Unit V °C °C - Note: Exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. Always be sure to use the product within the absolute maximum ratings. *1: JEDEC level 4 Electrical and optical characteristics (Ta=25 °C) Parameter Spectral response range Peak sensitivity wavelength Photosensitivity Short circuit current Dark current Temperature cofficient of ID Symbol p S Isc ID TCID Rise time tr Terminal capacitance Ct Condition =p 100 lx, 2856K VR=1 V VR=0 V, RL=1 K 10 to 90% VR=0 V, f=10 kHz Min. 1.4 - Typ. 320 to 1100 940 0.54 1.9 1 1.12 Max. 2.4 10 - Unit nm nm A/W μA nA times/°C - 0.5 - μs - 200 400 pF www.hamamatsu.com 1 S10625-01CT Si photodiode Spectral response Short circuit current vs. light level (Typ. Ta=25 °C) 0.7 0.6 100 μA QE=100% Short circuit current 0.5 0.4 0.3 0.2 10 μA 1 μA 100 nA 10 nA 0.1 1 nA 0 200 400 600 800 1000 1200 1 10 Wavelength (nm) 100 1000 10000 Light level (lx) KSPDB0310EA KSPDB0311EA Directivity (Typ. Ta=25 °C, light source: tungsten lamp) 30° 20° 10° 0° 10° 20° 30° 40° 40° 50° 50° 60° 60° 70° Y direction 80° 80° 60 X direction 70° X direction 90° 100 80 Y direction Photosensitivity (A/W) (Typ. Ta=25 °C, VR=0 V, light source: 2856 K) 1 mA 40 20 0 20 40 60 90° 80 100 Relative sensitivity (%) KSPDB0312EA 2 S10625-01CT Si photodiode Dark current vs. reverse voltage Terminal capacitance vs. reverse voltage (Typ. Ta=25 °C) 1 nA Terminal capacitance 10 pA 100 pF 10 pF 1 pA 100 fA 0.01 0.1 1 10 100 1 pF 0.1 1 Reverse voltage (V) 10 Dimensional outlines (unit: mm) KSPDB0338EA Recommended land pattern (unit: mm) 1.5 3.2* 2.0 1.5 (2.3) 2.5 Photosensitive surface 1.4 1.15 Photosensitive area 1.3 × 1.3 100 Reverse voltage (V) KSPDB0337EA (4 ×) (R0.25) 0.17 2.0 Photosensitive surface Component placement example 1.1 KSPDC0084EA 0.6 2.1 Anode (common) Cathode (common) Tolerance unless otherwise noted: ±0.2 Chip position accuracy with respect to package dimensions marked * X, Y≤±0.3 Electrode 0.9 2.7* Dark current 100 pA (Typ. Ta=25 °C) 1 nF Index mark KSPDA0207EA 3 S10625-01CT Si photodiode Standard packing specifications Reel (conforms to JEITA ET-7200) Dimensions Hub diameter Tape width Material 178 mm 60 mm 8 mm PS Electrostatic characteristics - Reel feed direction 0.23 ± 0.1 (3.35) 2.0 ± 0.1 8.0 ± 0.3 4.0 ± 0.1 3.5 ± 0.1 1.55 ± 0.05 1.75 ± 0.1 Embossed tape (unit: mm, material: PC) (1.65) (2.82) KPINC0024EA Packing quantity 2000 pcs/reel Packing type Reel and desiccant in moisture-proof packaging (vacuum-sealed) 4 S10625-01CT Si photodiode Measured example of temperature profile with our hot-air reflow oven for product testing 300 °C 240 °C max. Temperature 220 °C 190 °C 170 °C Preheat 70ġŵŰġ90 s Soldering 40 s max. Time KSPDB0313EB ∙ This product supports lead-free soldering. After unpacking, store it in an environment at a temperature of 30 °C or less and a humidity of 60% or less, and perform soldering within 72 hours. ∙ The effect that the product receives during reflow soldering varies depending on the circuit board and reflow oven that are used. Before actual reflow soldering, check for any problems by tesitng out the reflow soldering methods in advance. Related information www.hamamatsu.com/sp/ssd/doc_en.html Precautions ∙ Notice ∙ Surface mount type products / Precautions Technical information ∙ Si photodiode / Application circuit examples Information described in this material is current as of November, 2013. Product specifications are subject to change without prior notice due to improvements or other reasons. This document has been carefully prepared and the information contained is believed to be accurate. In rare cases, however, there may be inaccuracies such as text errors. Before using these products, always contact us for the delivery specification sheet to check the latest specifications. Type numbers of products listed in the delivery specification sheets or supplied as samples may have a suffix "(X)" which means preliminary specifications or a suffix "(Z)" which means developmental specifications. The product warranty is valid for one year after delivery and is limited to product repair or replacement for defects discovered and reported to us within that one year period. However, even if within the warranty period we accept absolutely no liability for any loss caused by natural disasters or improper product use. Copying or reprinting the contents described in this material in whole or in part is prohibited without our prior permission. www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Solid State Division 1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, Bridgewater, N.J. 08807, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218 Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 8152-375-0, Fax: (49) 8152-265-8 France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777 North Europe: Hamamatsu Photonics Norden AB: Torshamnsgatan 35 16440 Kista, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01 Italy: Hamamatsu Photonics Italia S.r.l.: Strada della Moia, 1 int. 6, 20020 Arese (Milano), Italy, Telephone: (39) 02-93581733, Fax: (39) 02-93581741 China: Hamamatsu Photonics (China) Co., Ltd.: B1201, Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: (86) 10-6586-6006, Fax: (86) 10-6586-2866 Cat. No. KSPD1081E01 Nov. 2013 DN 5