1600 L•R WALLTM DECEMBER, 2013 EC 97911-053 FEATURES Features • 1600 L•R WallTM is a low rise curtain wall system for stock length sales • • • • • • • • • • • • 1600 L•R WallTM has a 2-1/2" (63.5) sight line Standard 5-3/4" (146.1) or 7-1/4" (184.2) depth systems This system is outside, pressure glazed available captured or SSG Captured system: −− No drilled weeps −− Water deflectors used typically −− Intermediate horizontals are mullion drained −− Joint plugs only required at weeped horizontals above vertical splices SSG system: −− Structural silicone glazed verticals and captured horizontals −− Extruded joint plugs required with weeped intermediate horizontals Infill options are 1/8" (3.2), 1/4" (6.4) or 1" (24.5) Concealed fastener joinery creates smooth, monolithic appearance EPDM gasket and thermal break Open back horizontals and perimeters are available for cost savings Shear block fabrication method Corner mullions available Offers integrated entrance framing systems Silicone compatible glazing materials for long-lasting seals Two color option PermanodicTM anodized finishes in seven standard choices Painted finishes in standard and custom choices Optional Features • • • • • © Kawneer Company, Inc., 2013 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. • • • • Steel reinforcing available Captured system heavy-weight mullion available for 7-1/4" (184.2) system Captured system integrates with standard Kawneer windows Captured system integrates with concealed GLASSventTM for curtain wall Profit$MakerTM Plus die sets available Product Applications • Ideal for low rise applications −− 4 stories or less, no more than one splice per mullion For specific product applications, Consult your Kawneer representative. kawneer.com ADMD070 1 Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 1600 L•R WALLTM BLANK PAGE ADMD070 kawneer.com © Kawneer Company, Inc., 2013 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 2 DECEMBER, 2013 EC 97911-053 1600 L•R WALLTM DECEMBER, 2013 EC 97911-053 3 INDEX PICTORIAL VIEW................................................................................ 5 TYPICAL DETAILS.............................................................................. 6 ENTRANCE DETAILS......................................................................... 7 CORNER DETAILS...........................................................................8, 9 GLASSventTM DETAILS FOR STOREFRONT AND CURTAIN WALL........................................................................... 10 WINDOW APPLICATION................................................................... 11 ANCHOR DETAILS.......................................................................12, 13 WINDLOAD CHARTS................................................................... 14-20 DEADLOAD CHARTS.................................................................. 21-23 THERMAL CHARTS .................................................................... 24-31 LAWS AND BUILDING AND SAFETY CODES GOVERNING THE DESIGN AND USE OF GLAZED ENTRANCE, WINDOW, AND CURTAIN WALL PRODUCTS VARY WIDELY. KAWNEER DOES NOT CONTROL THE SELECTION OF PRODUCT CONFIGURATIONS, OPERATING HARDWARE, OR GLAZING MATERIALS, AND ASSUMES NO RESPONSIBILITY THEREFOR. © Kawneer Company, Inc., 2013 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. Architects - Most extrusion and window types illustrated in this catalog are standard products for Kawneer. These concepts have been expanded and modified to afford you design freedom. Some miscellaneous details are non-standard and are intended to demonstrate how the system can be modified to expand design flexibility. Please contact your Kawneer representative for further assistance. Metric (SI) conversion figures are included throughout these details for reference. Numbers in parentheses ( ) are millimeters unless otherwise noted. The following metric (SI ) units are found in these details: m –meter cm – centimeter mm –millimeter s –second Pa –pascal MPa –megapascal Kawneer reserves the right to change configurations without prior notice when deemed necessary for product improvement. kawneer.com ADMD070 Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 1600 L•R WALLTM BLANK PAGE ADMD070 kawneer.com © Kawneer Company, Inc., 2013 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 4 DECEMBER, 2013 EC 97911-053 © Kawneer Company, Inc., 2013 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. DECEMBER, 2013 kawneer.com 1600 L•R WALLTM EC 97911-053 PICTORIAL VIEW ADMD070 5 7A OPTIONAL JAMB 10 2-1/2" 7 7A 11 8 8A 8 4 5 (63.5) 2-1/2" 8A 11 ADMD070 (63.5) 10 7-1/4" (184.2) 12 1 9 9A 6 5-3/4" (146.1) ELEVATION IS NUMBER KEYED TO DETAILS 5" (127.0) 2 9 6-1/2" (165.1) 7-1/4" (184.2) Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. SCALE 3" = 1'-0" 6-1/2" (165.1) TYPICAL DETAILS 9A 4 OPTIONAL STEEL REINFORCING AS REQUIRED 5 12 6 kawneer.com © Kawneer Company, Inc., 2013 5" (127.0) 1600 L•R WALLTM Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 7 5-3/4" (146.1) 6 DECEMBER, 2013 EC 97911-053 1 2 3 3 © Kawneer Company, Inc., 2013 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 1 1A 2 B/H OR O/P CENTER HUNG kawneer.com ADMD070 TYP. 17/8" (47.6) Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. DECEMBER, 2013 1600 L•R WALLTM EC 97911-053 ENTRANCE DETAILS SCALE 3" = 1'-0" 3 1 4 TRANSOM BAR C/H ELEVATION IS NUMBER KEYED TO DETAILS BUTT HUNG OR OFFSET PIVOT WITH SURFACE CLOSER OR FLOOR CLOSER BUTT HUNG OR OFFSET PIVOT DOOR JAMB 2 1A 7/8" (22.2) TRANSOM BAR TYP. BUTT HUNG OR OFFSET PIVOT WITH SINGLE ACTING OFFSET ARM CLOSER DOOR JAMB 3 4 TRANSOM BAR CENTER HUNG CONCEALED OVERHEAD OR FLOOR CLOSER 7 CORNER DETAILS 90° OUTSIDE CORNER 90° OUTSIDE CORNER 90° SSG OUTSIDE CORNER 135° OUTSIDE CORNER 135° SSG OUTSIDE CORNER ADMD070 kawneer.com © Kawneer Company, Inc., 2013 SCALE 3" = 1'-0" Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 1600 L•R WALLTM Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 8 DECEMBER, 2013 EC 97911-053 NOTE:1" INFILL SHOWN, 1/4" INFILL SIMILAR. 7-1/4" SYSTEM SHOWN, 5-3/4" SYSTEM SIMILAR. © Kawneer Company, Inc., 2013 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. DECEMBER, 2013 SCALE 3" = 1'-0" kawneer.com 1600 L•R WALLTM EC 97911-053 CORNER DETAILS NOTE:1" INFILL SHOWN, 1/4" INFILL SIMILAR. 7-1/4" SYSTEM SHOWN, 5-3/4" SYSTEM SIMILAR. 90° INSIDE CORNER 90° SSG INSIDE CORNER 90° SSG INSIDE CORNER 135° INSIDE CORNER 135° SSG INSIDE CORNER ADMD070 9 JAMB HEAD 1-15/16" (49.2) SILL GLASSventTM FOR CURTAIN WALL PROJECT-OUT OR CASEMENT JAMB 1-11/16" (42.9) HEAD SILL ADMD070 kawneer.com © Kawneer Company, Inc., 2013 DETAILS FOR STOREFRONT AND CURTAIN WALL Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 1600 L•R WALLTM Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. GLASSvent 2-3/4" (69.9) TM 3-7/16" (87.3) 10 DECEMBER, 2013 EC 97911-053 SCALE 3" = 1'-0" SEF GLASSventTM FOR STOREFRONT PROJECT-OUT OR CASEMENT © Kawneer Company, Inc., 2013 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. DECEMBER, 2013 kawneer.com 1600 L•R WALLTM EC 97911-053 WINDOW APPLICATION SCALE 3" = 1'-0" 8225TL IsoLockTM WINDOW SHOWN Note: Other window types can be accomodated. Contact your Kawneer representative for other options. HEAD JAMB SILL ADMD070 11 SCALE 3" = 1'-0" 1"MINIMUM (25.4) ANCHOR TO FLOOR SLAB 1"MINIMUM (25.4) ANCHOR TO SUPPORT STEEL ADMD070 kawneer.com © Kawneer Company, Inc., 2013 ANCHOR DETAILS Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 1600 L•R WALLTM Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 12 DECEMBER, 2013 EC 97911-053 Actual project contitions will determine specific anchor design. Details on this page are reference only. Captured mullions shown, SSG mullion similar. © Kawneer Company, Inc., 2013 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. DECEMBER, 2013 SCALE 3" = 1'-0" kawneer.com 1600 L•R WALLTM EC 97911-053 ANCHOR DETAILS Actual project contitions will determine specific anchor design. Details on this page are reference only. Captured mullions shown, SSG mullion similar. 1"MINIMUM (25.4) ANCHOR TO HORIZONTAL STEEL STRUCTURE 1"MINIMUM (25.4) ANCHOR TO VERTICAL STEEL STRUCTURE ADMD070 13 14 1600 L•R WALLTM DECEMBER, 2013 WINDLOAD - DEADLOAD CHARTS EC 97911-053 DEADLOAD CHARTS Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. Horizontal or deadload limitations are based upon 1/8" (3.2), maximum allowable deflection at the center of an intermediate horizontal member. The accompanying charts are calculated for 1" (25.4) thick insulating glass or 1-3/4" (44.5) thick glass supported on two setting blocks placed at the loading points shown. ADMD070 kawneer.com © Kawneer Company, Inc., 2013 Mullions are designed for deflection limitations in accordance with AAMA TIR-A11 of L/175 up to 13'-6" and L/240 +1/4" above 13'-6". These curves are for mullions WITH HORIZONTALS and are based on engineering calculations for stress and deflection. Allowable wind load stress for ALUMINUM 15,152 psi (104MPa), STEEL 30,000 psi (207MPa.). Charted curves, in all cases are for the limiting value. If the design wind load is determined through the analytical procedures of ASCE/SEI 7-10 or earlier editions, the load shall be based on the nominal loads used in allowable stress design. A 4/3 increase in allowable stress has not been used to develop these curves. For special situations not covered by these curves, contact your Kawneer representative for additional information. Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. WIND LOAD CHARTS 1600 L•R WALLTM DECEMBER, 2013 EC 97911-053 WINDLOAD CHARTS A = 20 PSF (960) B = 30 PSF (1440) C = 40 PSF (1920) D = 50 PSF (2400) E = 60 PSF (2880) SINGLE SPAN TWIN SPAN METERS 1.0 1.0 2.0 18 30 17 29 16 28 15 27 14 26 2.0 9.0 4.0 B C 2.0 D E 7 6 5 23 7.0 22 21 A 20 6.0 19 18 17 5.0 B 16 4 1.0 3 15 C 14 2 168001 1 0 24 0 1 2 3 4 5 6 7 8 4.0 13 I = 4.025 (167.53 x 104) S = 1.565 (25.65 x103) 12 D 0 1 2 3 4 5 6 7 MULLION CENTERS IN FEET MULLION CENTERS IN FEET SINGLE SPAN TWIN SPAN METERS METERS 1.0 METERS 8 MULLION HEIGHT IN FEET A MULLION HEIGHT EQUAL EQUAL 3.0 9 METERS 11 5-3/4" (146.1) 12 10 8.0 25 MULLION HEIGHT 13 MULLION HEIGHT IN FEET Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. METERS 2.0 1.0 18 30 17 29 16 28 15 27 E8 2.0 9.0 8 D E 3.0 7 2.0 6 MULLION HEIGHT IN FEET C MULLION HEIGHT EQUAL EQUAL 9 7-1/4" (184.2) B MULLION HEIGHT A 11 10 24 23 21 B 20 6.0 19 C 18 17 4 16 1.0 7.0 22 5 3 A 25 METERS MULLION HEIGHT IN FEET 12 5.0 D 15 E 14 2 168011 1 0 1 2 3 4 5 6 7 8 I = 8.250 (343.39 x 104) S = 2.528 (41.43 x103) MULLION CENTERS IN FEET kawneer.com 4.0 13 12 0 1 2 3 4 5 6 7 MULLION CENTERS IN FEET ADMD070 8 METERS 4.0 13 0 8.0 26 14 © Kawneer Company, Inc., 2013 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 15 1600 L•R WALLTM DECEMBER, 2013 WINDLOAD CHARTS EC 97911-053 A = 20 PSF (960) B = 30 PSF (1440) C = 40 PSF (1920) D = 50 PSF (2400) E = 60 PSF (2880) METERS METERS 2.0 1.0 18 30 17 29 16 28 15 27 2.0 9.0 4.0 3.0 D E 9 8 7 2.0 6 MULLION HEIGHT IN FEET C 10 7-1/4" (184.2) B 11 MULLION HEIGHT EQUAL EQUAL 25 MULLION HEIGHT 12 METERS MULLION HEIGHT IN FEET 13 24 21 C 20 6.0 19 D 18 17 16 E 5.0 15 14 2 168015 1 0 7.0 22 4 1.0 B 23 5 3 8.0 26 A METERS 14 A 0 1 2 3 4 5 6 7 8 4.0 13 I = 12.438 (517.71 x 104) S = 3.371 (55.24 x 103) 12 0 1 2 3 4 5 6 7 SINGLE SPAN TWIN SPAN 168015 w/ 162300 168015 w/ 162300 METERS METERS 1.0 8 MULLION CENTERS IN FEET MULLION CENTERS IN FEET 2.0 1.0 18 30 17 29 2.0 9.0 A 16 27 15 B 7 2.0 6 MULLION HEIGHT IN FEET 8 MULLION HEIGHT EQUAL EQUAL 3.0 9 7-1/4" (184.2) 10 MULLION HEIGHT 11 24 21 20 18 16 0 1 2 3 4 5 6 7 8 5.0 15 168015 w/ 162300 1 6.0 19 17 2 7.0 22 4 1.0 E 23 5 3 D 25 C D E 12 METERS MULLION HEIGHT IN FEET 13 8.0 26 4.0 METERS 14 0 C 28 Ia = 12.438 (517.71 x 104) Sa = 3.371 (55.24 x 103) Is = 3.805 (158.38 x 104) Ss = 1.669 (27.35 x 103) 14 4.0 13 12 0 1 2 3 4 5 6 7 8 MULLION CENTERS IN FEET MULLION CENTERS IN FEET ADMD070 kawneer.com © Kawneer Company, Inc., 2013 1.0 TWIN SPAN Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. SINGLE SPAN Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 16 1600 L•R WALLTM DECEMBER, 2013 EC 97911-053 WINDLOAD CHARTS A = 20 PSF (960) B = 30 PSF (1440) C = 40 PSF (1920) D = 50 PSF (2400) E = 60 PSF (2880) SINGLE SPAN 168015 w/ 162301 METERS TWIN SPAN 168015 w/ 162301 METERS 2.0 1.0 9.0 A 17 29 D 28 16 B 27 C 14 7 2.0 6 MULLION HEIGHT IN FEET 8 MULLION HEIGHT EQUAL EQUAL 9 7-1/4" (184.2) 3.0 METERS 11 10 24 23 21 20 18 17 16 2 2 3 4 5 6 7 14 Ia = 12.438 (517.71 x 104) Sa = 3.371 (55.24 x 103) Is = 5.684 (236.59 x 104) Ss = 2.493 (40.85 x 103) 1 1 5.0 15 168015 w/ 162301 0 6.0 19 4 1.0 7.0 22 5 3 E 25 D E 12 MULLION HEIGHT 13 8.0 26 4.0 METERS 15 8 4.0 13 12 0 MULLION CENTERS IN FEET 3 4 5 6 7 8 SINGLE SPAN 168015 w/ 162301/302/303 METERS METERS 2.0 1.0 18 2.0 18 17 17 B B 16 C D E 15 14 14 4.0 7 2.0 6 5 MULLION HEIGHT IN FEET 8 7-1/4" (184.2) 3.0 9 METERS 11 7-1/4" (184.2) 12 10 4.0 13 MULLION HEIGHT 13 C D E 15 12 11 10 3.0 9 8 7 2.0 6 5 4 4 1.0 3 2 1 1 0 2 3 4 5 6 7 8 168015 w/ 162301/302 168015 w/ 162301/302/303 Ia = 12.438 (517.71 x 104) Sa = 3.371 (55.24 x 103) Is = 7.893 (328.53 x 104) Ss = 3.462 (56.73 x 103) Ia = 12.438 (517.71 x 104) Sa = 3.371 (55.24 x 103) Is = 9.347 (389.05 x 104) Ss = 4.100 (67.19 x 103) MULLION CENTERS IN FEET kawneer.com 1.0 3 2 1 0 0 1 2 3 4 5 6 7 MULLION CENTERS IN FEET ADMD070 8 METERS 16 MULLION HEIGHT IN FEET 2 168015 w/ 162301/302 1.0 © Kawneer Company, Inc., 2013 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 1 MULLION CENTERS IN FEET SINGLE SPAN 0 2.0 30 18 MULLION HEIGHT IN FEET Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 1.0 0 17 1600 L•R WALLTM DECEMBER, 2013 WINDLOAD CHARTS EC 97911-053 A = 20 PSF (960) B = 30 PSF (1440) C = 40 PSF (1920) D = 50 PSF (2400) E = 60 PSF (2880) SINGLE SPAN TWIN SPAN METERS METERS 1.0 2.0 1.0 18 30 17 29 16 28 15 27 14 26 2.0 9.0 4.0 3.0 A 9 8 E B C D 7 2.0 3-3/4" (95.3) 6 5 4 7.0 A 22 21 20 6.0 19 18 E B C D 5.0 16 15 14 1 0 1 2 3 4 5 6 7 8 4.0 13 I = 3.926 (163.41 x 104) S = 1.946 (31.89 x 103) 12 0 1 2 3 4 5 6 7 MULLION CENTERS IN FEET MULLION CENTERS IN FEET SINGLE SPAN TWIN SPAN METERS METERS 1.0 2.0 1.0 18 30 17 29 16 28 15 27 8 2.0 9.0 4.0 C D B 3.0 9 8 7 2.0 6 5 24 23 E 7.0 C D B 22 METERS E 10 MULLION HEIGHT IN FEET 11 METERS A MULLION HEIGHT EQUAL EQUAL 25 5-1/4" (133.4) 12 MULLION HEIGHT 13 MULLION HEIGHT IN FEET 8.0 26 14 21 20 6.0 19 18 17 5.0 16 4 1.0 3 15 14 2 168014 1 0 A 0 1 2 3 4 5 6 7 8 I = 8.912 (370.95 x 104) S = 3.090 (50.64 x 103) MULLION CENTERS IN FEET 4.0 13 12 0 1 2 3 4 5 6 7 8 MULLION CENTERS IN FEET ADMD070 kawneer.com © Kawneer Company, Inc., 2013 168004 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 2 0 23 17 1.0 3 24 METERS 10 MULLION HEIGHT IN FEET 11 MULLION HEIGHT 12 MULLION HEIGHT EQUAL EQUAL 25 METERS MULLION HEIGHT IN FEET 13 8.0 Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 18 1600 L•R WALLTM DECEMBER, 2013 EC 97911-053 WINDLOAD CHARTS A = 20 PSF (960) B = 30 PSF (1440) C = 40 PSF (1920) D = 50 PSF (2400) E = 60 PSF (2880) SINGLE SPAN 168014 w/ 162300 METERS TWIN SPAN 168014 w/ 162300 METERS 2.0 1.0 18 30 17 29 16 28 A 4.0 10 3.0 9 8 METERS 11 7 2.0 6 MULLION HEIGHT IN FEET 25 12 MULLION HEIGHT EQUAL EQUAL 13 24 23 21 20 18 17 16 1 2 3 4 5 6 7 14 Ia = 8.912 (370.95 x 104) Sa = 3.090 (50.64 x 103) Is = 3.805 (158.38 x 104) Ss = 1.669 (27.35 x 103) 8 4.0 13 12 0 MULLION CENTERS IN FEET SINGLE SPAN 3 4 5 6 7 METERS METERS 2.0 1.0 18 18 17 17 A 15 E D 14 8 SINGLE SPAN 168014 w/ 162301/302 16 C 5 MULLION HEIGHT IN FEET 5-1/4" (133.4) 6 MULLION HEIGHT 2.0 5-1/4" (133.4) 7 METERS 8 B 4.0 13 11 3.0 C 14 12 9 D E 15 4.0 10 2.0 A 16 B 13 MULLION HEIGHT IN FEET 2 168014 w/ 162301 1.0 12 11 10 3.0 9 8 7 2.0 6 5 4 4 1.0 3 2 1 0 1 MULLION CENTERS IN FEET 0 1 2 3 4 5 6 7 8 168014 w/ 162301/302 Ia = 8.912 (370.95 x 104) Sa = 3.090 (50.64 x 103) Is = 5.684 (236.59 x 104) Ss = 2.493 (40.85 x 103) Ia = 8.912 (370.95 x 104) Sa = 3.090 (50.64 x 103) Is = 7.893 (328.53 x 104) Ss = 3.462 (56.73 x 103) MULLION CENTERS IN FEET kawneer.com 1.0 3 168014 w/ 162301 2 1 0 0 1 2 3 4 5 6 7 MULLION CENTERS IN FEET ADMD070 8 METERS 0 5.0 15 168014 w/ 162300 2 0 6.0 19 4 1.0 7.0 22 5 3 8.0 26 B C 5-1/4" (133.4) D E 27 MULLION HEIGHT 14 E B C D METERS 15 1 © Kawneer Company, Inc., 2013 2.0 9.0 MULLION HEIGHT IN FEET Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 1.0 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 19 WINDLOAD CHARTS METERS 18 16 0 0 1 2 3 2.0 E D 4 5 C 15 6 B 14 13 12 4.0 11 10 9 3.0 8 6 7 2.0 5 4 3 1.0 2 168014 w/ 162301/302/303 1 7 8 Ia = 8.912 (370.95 x 104) Sa = 3.090 (50.64 x 103) Is = 9.347 (389.05 x 104) Ss = 4.100 (67.19 x 103) ADMD070 kawneer.com © Kawneer Company, Inc., 2013 1600 L•R WALLTM Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. SINGLE SPAN 5-1/4" (133.4) 17 MULLION HEIGHT 1.0 METERS 168014 w/ 162301/302/303 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. MULLION HEIGHT IN FEET 20 DECEMBER, 2013 EC 97911-053 A = 20 PSF (960) B = 30 PSF (1440) C = 40 PSF (1920) D = 50 PSF (2400) E = 60 PSF (2880) MULLION CENTERS IN FEET 1600 L•R WALLTM DECEMBER, 2013 EC 97911-053 21 DEADLOAD CHARTS 1" GLASS 1/4" GLASS 168001 168001 METERS METERS 1.0 1.0 2.0 16 16 15 15 14 4.0 13 12 10 METERS 3.0 9 8 7 5-3/4" (146.1) 2.0 6 5 C B 4 168001 1 2 3 4 5 6 7 C 8 B 7 2.0 6 5 A 1.0 2 1 0 3.0 9 3 A 2 10 4 1.0 3 11 1 I = 1.278 (53.19 x 104) S = 1.023 (16.76 x 103) 8 0 0 1 2 3 1/4" GLASS 7 8 168003 METERS 1.0 2.0 16 16 15 15 14 2.0 14 4.0 12 11 11 METERS 3.0 9 8 7 5-3/4" (146.1) 2.0 6 5 4 1.0 3 C B A 2 1 0 1 2 3 4 5 6 7 8 GLASS HEIGHT IN FEET 12 10 4.0 13 10 3.0 METERS 13 GLASS HEIGHT IN FEET 6 1" GLASS 1.0 © Kawneer Company, Inc., 2013 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 5 SPAN IN FEET METERS 9 8 7 2.0 6 5 C 4 B 1.0 3 A 2 168003 I = 0.733 (30.51 x 104) S = 0.457 (7.49 x 103) 1 0 0 1 2 3 4 5 SPAN IN FEET SPAN IN FEET kawneer.com 4 SPAN IN FEET 168003 0 METERS 11 GLASS HEIGHT IN FEET 12 0 2.0 14 4.0 13 GLASS HEIGHT IN FEET Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. A = 1/4 POINT LOADING B = 1/6 POINT LOADING C = 1/8 POINT LOADING ADMD070 6 7 8 1600 L•R WALLTM 22 DECEMBER, 2013 DEADLOAD CHARTS EC 97911-053 1" GLASS 1/4" GLASS 168006 168006 METERS METERS 1.0 1.0 2.0 16 16 15 15 14 14 4.0 12 11 11 8 7 5-3/4" (146.1) 2.0 6 5 4 1.0 3 C B A 2 1 2 3 4 5 6 7 8 7 2.0 6 5 C 4 B 3 A 1.0 2 168006 1 I = 0.747 (31.09 x 104) S = 0.471 (7.72 x 103) 8 0 0 1 2 3 6 1" GLASS 1/4" GLASS 7 8 168011 METERS METERS 1.0 1.0 2.0 16 16 15 15 2.0 14 4.0 13 12 11 METERS 3.0 9 8 7 7-1/4" (184.2) 2.0 6 C 5 B 4 A C 10 3.0 B 9 8 7 2.0 A 6 5 4 1.0 3 GLASS HEIGHT IN FEET 12 11 10 4.0 13 METERS 14 GLASS HEIGHT IN FEET 5 SPAN IN FEET 168011 1.0 3 2 2 168011 1 0 4 SPAN IN FEET 0 1 2 3 4 5 6 7 8 I = 1.683 (70.05 x 104) S = 1.346 (22.06 x 103) SPAN IN FEET 1 0 0 1 2 3 4 5 6 7 8 SPAN IN FEET ADMD070 kawneer.com © Kawneer Company, Inc., 2013 1 3.0 9 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 0 10 METERS 3.0 9 GLASS HEIGHT IN FEET 12 10 4.0 13 METERS GLASS HEIGHT IN FEET 13 0 2.0 Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. A = 1/4 POINT LOADING B = 1/6 POINT LOADING C = 1/8 POINT LOADING 1600 L•R WALLTM DECEMBER, 2013 EC 97911-053 23 DEADLOAD CHARTS 1" GLASS 1/4" GLASS 168013 168013 METERS METERS 1.0 1.0 2.0 16 16 15 15 14 4.0 13 12 10 3.0 METERS 9 8 7 7-1/4" (184.2) 2.0 6 5 4 11 10 3.0 9 METERS 11 GLASS HEIGHT IN FEET 12 8 7 2.0 6 C 5 B 4 1.0 C B A 3 2 1 0 0 1 2 3 4 5 6 7 1.0 A 3 2 168013 1 I = 0.823 (34.26 x 104) S = 0.487 (7.98 x 103) 8 0 0 1 2 3 1/4" GLASS 7 8 168016 METERS 1.0 2.0 16 16 15 15 14 2.0 14 4.0 12 11 11 3.0 METERS 9 8 7 7-1/4" (184.2) 2.0 6 5 4 GLASS HEIGHT IN FEET 12 10 4.0 13 10 3.0 9 METERS 13 GLASS HEIGHT IN FEET 6 1" GLASS 1.0 © Kawneer Company, Inc., 2013 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 5 SPAN IN FEET METERS 8 7 2.0 6 C 5 B 4 1.0 C B A 3 2 1 0 1 2 3 4 5 6 7 8 1.0 A 3 2 168016 I = 0.842 (35.05 x 104) S = 0.503 (8.24 x 103) 1 0 0 1 2 3 4 5 SPAN IN FEET SPAN IN FEET kawneer.com 4 SPAN IN FEET 168016 0 2.0 14 4.0 13 GLASS HEIGHT IN FEET Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. A = 1/4 POINT LOADING B = 1/6 POINT LOADING C = 1/8 POINT LOADING ADMD070 6 7 8 1600 L•R WALLTM 24 DECEMBER, 2013 THERMAL CHARTS EC 97911-053 Project Specific U-factor Example Calculation (Based on single bay of Curtain Wall/Window Wall) 6'-0" D.L.O. SPANDREL 9'-0" D.L.O. VISION Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 5'-0" D.L.O. Vision Area Example Glass U-factor = 0.48 Btu/(ft2 · h · °F) Vision Area = 5(9 + 8 + 4) = 105.0 ft2 Total Area (Vision) = 5' 2-1/2" (9' 3-3/4" + 8' 2-1/2" + 4' 2-1/2") = 113.2 ft2 Percentage of Vision Glass = (Vision Area ÷ Total Area)100 = (105.0 ÷ 113.2)100 = 93% Spandrel Area Example Spandrel R-value = 15 (ft2 · h · °F)/Btu Spandrel Area = 5(6 + 3) = 45.0 ft2 Total Area (Spandrel) = 5' 2-1/2" (6' 2-1/2" + 3' 3-3/4") = 49.6 ft2 Percent of Spandrel = (Spandrel Area ÷ Total Area)100 = (49.0 ÷ 49.6)100 = 91% ADMD070 kawneer.com © Kawneer Company, Inc., 2013 Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. VISION 2-1/2" Typ. 3'-0" D.L.O. 4'-0" D.L.O. VISION 31'-3" SPANDREL 8'-0" D.L.O. 2-1/2" Typ. 1600 L•R WALLTM DECEMBER, 2013 EC 97911-053 25 THERMAL CHARTS Vision Area Chart System U-factor vs Percent of Vision Area (N 0.70 E IGN PL S M E A D EX OR F T O COG U-factor 0.53 0.50 0.40 0.30 ) 0.48 0.46 0.44 0.42 0.40 0.38 0.36 0.34 0.32 0.30 0.28 0.26 0.24 0.22 0.20 0.60 Btu h·ft 2·°F System U-factor Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 0.80 93% 0.20 95 85 90 75 80 70 Vision Area / Total Area (%) Based on a single curtain wall bay of 93% vision glass and center of glass U-factor of 0.48, System U-factor is equal to 0.53 Btu/(h·ft 2·°F) System U-factor vs Percent of Spandrel Area Spandrel R-value E IGN PL S M E A D EX OR F T O 3.00 © Kawneer Company, Inc., 2013 4.00 5.00 0.30 0.21 0.20 0.10 91% 95 0.40 ) 11.00 15.00 19.00 30.00 0.50 Btu h·ft 2·°F System U-factor 2.00 0.60 (N Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. Spandrel Area Chart 90 85 80 75 70 Spandrel Area / Total Area (%) Based on a single curtain wall bay of 91% spandrel and center of spandrel R-value of 15, system U-factor is equal to 0.21 Btu/(h·ft 2·°F) kawneer.com ADMD070 1600 L•R WALLTM DECEMBER, 2013 THERMAL CHARTS (CAPTURED) Note: Values in parentheses are metric. COG=Center of Glass. Charts are generated per AAMA 507. EC 97911-053 Captured Chart Notes for Systen U-factor, SHGC and VT charts: For glass values that are not listed, linear interpolation is permitted. Glass properties are based on center of glass values and are obtained from your glass supplier. ADMD070 kawneer.com © Kawneer Company, Inc., 2013 Percent of Glass = Vision Area/Total Area (Total Daylight Opening/Projected Area) Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. COG U-factor Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. System U-factor vs Persent of Glass Area System U-Factor (Btu/h·ft2·°F) 26 System VT © Kawneer Company, Inc., 2013 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. System SHGC Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. DECEMBER, 2013 kawneer.com 1600 L•R WALLTM EC 97911-053 THERMAL CHARTS (CAPTURED) Captured Chart System Solar Heat Gain Coefficient (SHGC) vs Percent of Vision Area COG SHGC Vision Area / Total Area (%) Charts are generated per AAMA 507. Captured Chart System Visible Transmittance (VT) vs Percent of Vision Area COG VT Vision Area / Total Area (%) Charts are generated per AAMA 507. ADMD070 27 1600 L•R WALLTM DECEMBER, 2013 THERMAL PERFORMANCE MATRIX (NFRC SIZE) EC 97911-053 2 Overall U-Factor 4 0.48 0.61 0.46 0.59 0.44 0.58 0.42 0.56 0.40 0.55 0.38 0.53 0.36 0.51 0.34 0.50 0.32 0.48 0.30 0.46 0.28 0.45 0.26 0.43 0.24 0.41 0.22 0.40 0.20 0.38 SHGC Matrix 2 (CAPTURED) Visible Transmittance 2 (CAPTURED) Glass SHGC 3 Overall SHGC 4 Glass VT 3 Overall VT 4 0.75 0.82 0.75 0.81 0.70 0.78 0.70 0.77 0.65 0.73 0.65 0.72 0.60 0.69 0.60 0.68 0.55 0.64 0.55 0.63 0.50 0.60 0.50 0.59 0.45 0.55 0.45 0.54 0.40 0.51 0.40 0.50 0.35 0.46 0.35 0.45 0.30 0.42 0.30 0.41 0.25 0.37 0.25 0.36 0.20 0.33 0.20 0.32 0.15 0.28 0.15 0.27 0.10 0.24 0.10 0.23 0.05 0.19 0.05 0.18 NOTE: For glass values that are not listed, linear interpolation is permitted. 1. U-Factors are determined in accordance with NFRC 100. 2. SHGC and VT values are determined in accordance with NFRC 200. 3. Glass properties are based on center of glass values and are obtained from your glass supplier. 4. Overall U-Factor, SHGC, and VT Matricies are based on the standard NFRC specimen size of 2000mm wide by 2000mm high (78-3/4" by 78-3/4"). ADMD070 kawneer.com © Kawneer Company, Inc., 2013 Glass U-Factor 3 Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. Thermal Transmittance 1 (BTU/hr • ft • °F) (CAPTURED) Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 28 1600 L•R WALLTM DECEMBER, 2013 EC 97911-053 Note: Values in parentheses are metric. COG=Center of Glass. Charts are generated per AAMA 507. THERMAL CHARTS (SSG) SSG Chart System U-Factor (Btu/h·ft2·°F) System U-factor vs Percentage of Glass Area Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. COG U-factor © Kawneer Company, Inc., 2013 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 29 Percent of Glass = Vision Area/Total Area (Total Daylight Opening/Projected Area) Notes for Systen U-factor, SHGC and VT charts: For glass values that are not listed, linear interpolation is permitted. Glass properties are based on center of glass values and are obtained from your glass supplier. kawneer.com ADMD070 COG SHGC Vision Area / Total Area (%) System Visible Transmittance (VT) vs Percent of Vision Area COG VT Vision Area / Total Area (%) Charts are generated per AAMA 507. ADMD070 kawneer.com © Kawneer Company, Inc., 2013 THERMAL CHARTS (SSG) Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. System SHGC 1600 L•R WALLTM Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. System VT 30 DECEMBER, 2013 EC 97911-053 SSG Chart System Solar Heat Gain Coefficient (SHGC) vs Percent of Vision Area Charts are generated per AAMA 507. SSG Chart 1600 L•R WALLTM DECEMBER, 2013 EC 97911-053 THERMAL PERFORMANCE MATRIX (NFRC SIZE) 2 Glass U-Factor 3 Overall U-Factor 4 0.48 0.55 0.46 0.54 0.44 0.52 0.42 0.50 0.40 0.49 0.38 0.47 0.36 0.45 0.34 0.43 0.32 0.42 0.30 0.40 0.28 0.38 0.26 0.37 0.24 0.35 0.22 0.33 0.20 0.32 SHGC Matrix 2 (SSG) Visible Transmittance 2 (SSG) Glass SHGC 3 Overall SHGC 4 Glass VT 3 Overall VT 4 0.90 0.84 0.90 0.81 0.85 0.80 0.85 0.77 0.80 0.75 0.80 0.72 0.75 0.71 0.75 0.68 0.70 0.66 0.70 0.63 0.65 0.62 0.65 0.59 0.60 0.57 0.60 0.54 0.55 0.53 0.55 0.50 0.50 0.48 0.50 0.45 0.45 0.44 0.45 0.41 0.40 0.39 0.40 0.36 0.35 0.35 0.35 0.32 0.30 0.30 0.30 0.27 0.25 0.26 0.25 0.23 0.20 0.21 0.20 0.18 © Kawneer Company, Inc., 2013 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. Thermal Transmittance 1 (BTU/hr • ft • °F) (SSG) NOTE: For glass values that are not listed, linear interpolation is permitted. 1. U-Factors are determined in accordance with NFRC 100. 2. SHGC and VT values are determined in accordance with NFRC 200. 3. Glass properties are based on center of glass values and are obtained from your glass supplier. 4. Overall U-Factor, SHGC, and VT Matricies are based on the standard NFRC specimen size of 2000mm wide by 2000mm high (78-3/4" by 78-3/4"). kawneer.com ADMD070 31 Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 1600 L•R WALLTM BLANK PAGE ADMD070 kawneer.com © Kawneer Company, Inc., 2013 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 32 DECEMBER, 2013 EC 97911-053