VS-2KBB Series www.vishay.com Vishay Semiconductors Single Phase Rectifier Bridge, 1.9 A FEATURES • Suitable for printed circuit board mounting • Leads on standard 2.54 mm (0.1") grid • Compact construction • High surge current capability • Polarized package • Equivalent to standard DIN parts • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 2KBB DESCRIPTION PRODUCT SUMMARY IO 1.9 A VRRM 50 V to 1000 V A 1.9 A single phase diode bridge rectifier assembly consisting of four silicon diodes in a plastic encapsulation, intended for general applications in industrial and consumer equipment. Package 2KBB Circuit Single phase bridge MAJOR RATINGS AND CHARACTERISTICS SYMBOL CHARACTERISTICS IO IFSM I2t VALUES UNITS 1.9 A TC 45 °C 50 Hz 50 60 Hz 52 50 Hz 17.7 60 Hz 16.1 VRRM A A2s 100 to 1000 V -40 to 150 °C TJ ELECTRIACL SPECIFICATIONS VOLTAGE RATINGS AND APPLICATION DATA CROSS REFERENCE PART NUMBER DIN CODE VRRM, VRSM MAXIMUM PEAK REVERSE VOLTAGE TJ = 15 °C (V) IRM TYPICAL PEAK REVERSE CURRENT PER DIODE AT RATED VRRM (μA) TJ = 25 °C TJ = 150 °C APPLICATION DATA (SEE FIGURE 3) VRMS MAXIMUM RECOMMENDE D AC SUPPLY VOLTAGE (V) CMAX RMIN MAXIMUM MINIMUM LOAD SOURCE CAPACITANCE RESISTANCE (μF) (Ω) VS-2KBB05 B20C1500 50 10 500 20 7000 0.3 VS-2KBB10 B40C1500 100 10 500 40 5000 0.5 VS-2KBB20 B80C1500 200 10 500 80 3300 0.8 VS-2KBB40 B125C1500 400 10 500 125 1600 1.5 VS-2KBB60 B250C1500 600 10 500 250 1200 2.5 VS-2KBB80 B380C1500 800 10 500 380 800 3.0 VS-2KBB100 B500C1500 1000 10 500 500 600 5.0 Note • For PIN configuration - ~ ~ + add “R” to end of part number, e.g. 2KBB05R (see also dimensions for details - link at the end of datasheet) Revision: 26-Aug-14 Document Number: 93561 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-2KBB Series www.vishay.com Vishay Semiconductors FORWARD CONDUCTION PARAMETER SYMBOL Maximum DC output current IO Maximum peak one cycle, non-repetitive surge current IFSM TEST CONDITIONS 1.9 TC = 45 °C, capacitive load 1.5 t = 6 ms Following any rated load condition, and with rated VRRM applied following surge 50 Rated VRRM applied following surge, initial TJ = 150 °C 12.5 t = 5 ms t = 10 ms Maximum I2t for fusing, initial TJ = TJ maximum t = 8.3 ms I2t Maximum I2√t capability for fusing I2√t (1) Maximum peak forward voltage per diode Operating frequency range VFM VALUES TC = 45 °C, resistive and inductive load A A 52 11.3 t = 10 ms 17.7 t = 8.3 ms 16.1 t = 0.1 to 10 ms, VRRM following surge = 0 177 IO = 1.9 A (3.0 Apk) f UNITS A2s A2√s 1.1 V 40 to 2000 Hz Note (1) I2t for time t = I2√t x √t x x THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER Operating junction and storage temperature range SYMBOL VALUES UNITS TJ, TStg -40 to 150 °C 4 g 0.14 oz. Approximate weight 1.8 Maximum Peak Output Current (A) Average Output Current (A) 2.0 Resistive, inductive load 1.6 1.4 1.2 1.0 Capacitive load 0.8 0.6 0.4 0.2 0 0 20 40 60 80 100 120 140 160 60 50 40 30 20 10 0 10-2 10-1 1 10 Maximum Allowable Ambient Temperature (°C) Equal Amplitude Pulse Train Duration (s) Fig. 1 - Average (DC) Output Current vs. Maximum Allowable Ambient Temperature Fig. 2 - Maximum Non-Repetitive Surge Current vs. Pulse Train Duration (f = 50 Hz) Revision: 26-Aug-14 Document Number: 93561 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-2KBB Series www.vishay.com Vishay Semiconductors 600 10 CL = 400 µF Average Output Current (A) RMS Supply Voltage (V) CL = 200 µF 500 CL = 600 µF 400 CL = 800 µF 300 CL = 1600 µF CL = 1200 µF 200 CL = 3300 µF CL = 5000 µF 100 CL = 7000 µF 5 Resistive, inductive load 2 Capacitive load 1 0.5 0 0 1 2 3 4 5 6 10-1 1 10 102 103 Minimum Required Value of Source Resistance (Ω) Switch-On Surge Duration (s) Fig. 3 - Minimum Required Source Resistance vs. RMS Supply Voltage and Load Capacitance Fig. 4 - Maximum Switch-On Surge Current vs. Surge Duration CIRCUIT CONFIGURATION AC (+) AC (-) LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?95328 Revision: 26-Aug-14 Document Number: 93561 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions Vishay Semiconductors 2KBB DIMENSIONS in millimeters (inches) 15.50 (0.610) 14.50 (0.570) - ~ + 7.00 (0.276) 6.00 (0.236) ~ 18.00 (0.709) 17.00 (0.669) 20.00 (0.787) (TYP.) Ø 5.10 (0.201) Ø 4.30 (0.169) Ø 0.9 (0.035) (TYP.) Ø 0.7 (0.028) Note • For PIN configuration - ~ ~ + add “R” to end of part number Document Number: 95328 Revision: 04-Jul-08 For technical questions, contact: [email protected] www.vishay.com 1 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000