SQP60N06-15 www.vishay.com Vishay Siliconix Automotive N-Channel 60 V (D-S) 175 °C MOSFET FEATURES PRODUCT SUMMARY VDS (V) • TrenchFET® Power MOSFET 60 RDS(on) () at VGS = 10 V • Package with Low Thermal Resistance 0.015 ID (A) • AEC-Q101 Qualifiedd 56 Configuration • 100 % Rg and UIS Tested Single • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 D TO-220AB G S N-Channel MOSFET G D S Top View ORDERING INFORMATION Package TO-220 Lead (Pb)-free and Halogen-free SQP60N06-15-GE3 ABSOLUTE MAXIMUM RATINGS (TC = 25 °C, unless otherwise noted) PARAMETER SYMBOL LIMIT Drain-Source Voltage VDS 60 Gate-Source Voltage VGS ± 20 TC = 25 °C Continuous Drain Current Continuous Source Current (Diode ID TC = 125 °C Conduction)a Pulsed Drain Currentb Single Pulse Avalanche Current Single Pulse Avalanche Energy Maximum Power Dissipationb L = 0.1 mH Operating Junction and Storage Temperature Range 32 IS 60 190 IAS 29 PD TC = 125 °C V 56 IDM EAS TC = 25 °C UNIT 42 107 35 A mJ W TJ, Tstg - 55 to + 175 °C SYMBOL LIMIT UNIT RthJA 40 RthJC 1.4 THERMAL RESISTANCE RATINGS PARAMETER Junction-to-Ambient PCB Mountc Junction-to-Case (Drain) °C/W Notes a. Package limited. b. Pulse test; pulse width 300 μs, duty cycle 2 %. c. When mounted on 1" square PCB (FR-4 material). d. Parametric verification ongoing. S13-0840-Rev. A, 22-Apr-13 1 Document Number: 63554 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SQP60N06-15 www.vishay.com Vishay Siliconix SPECIFICATIONS (TC = 25 °C, unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT Static Drain-Source Breakdown Voltage Gate-Source Threshold Voltage Gate-Source Leakage Zero Gate Voltage Drain Current On-State Drain Currenta Drain-Source On-State Resistancea Forward Transconductanceb VDS VGS = 0, ID = 250 μA 60 - - VGS(th) VDS = VGS, ID = 250 μA 2.5 - 3.5 VDS = 0 V, VGS = ± 20 V IGSS IDSS ID(on) RDS(on) - - ± 100 VGS = 0 V VDS = 60 V - - 1 VGS = 0 V VDS = 60 V, TJ = 125 °C - - 50 VGS = 0 V VDS = 60 V, TJ = 175 °C - - 250 VGS = 10 V VDS5 V 75 - - VGS = 10 V ID = 30 A - 0.012 0.015 VGS = 10 V ID = 30 A, TJ = 125 °C - - 0.027 VGS = 10 V ID = 30 A, TJ = 175 °C gfs VDS = 15 V, ID = 30 A - - 0.033 - 61 - V nA μA A S Dynamicb Input Capacitance Ciss Output Capacitance Coss Reverse Transfer Capacitance Total Gate Chargec Gate-Source Chargec Qgs Gate-Drain Chargec Gate Resistance Turn-On Delay Timec Rise Timec Turn-Off Delay Timec Fall Timec - 1983 2480 - 314 395 Crss - 125 160 Qg - 33 50 - 10.7 - VGS = 0 V VDS = 25 V, f = 1 MHz VGS = 10 V VDS = 30 V, ID = 60 A Qgd - 8.8 - 0.8 1.6 2.4 - 11 17 VDD = 30 V, RL = 0.5 ID 60 A, VGEN = 10 V, Rg = 1 - 12 18 - 21 32 - 7 11 - - 190 A - 0.9 1.5 V td(on) td(off) nC f = 1 MHz Rg tr pF tf ns Source-Drain Diode Ratings and Characteristicsb Pulsed Currenta ISM Forward Voltage VSD IF = 30 A, VGS = 0 Notes a. Pulse test; pulse width 300 μs, duty cycle 2 %. b. Guaranteed by design, not subject to production testing. c. Independent of operating temperature. Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. S13-0840-Rev. A, 22-Apr-13 2 Document Number: 63554 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SQP60N06-15 www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted) 100 100 V GS = 10 V thru 7 V 80 ID - Drain Current (A) ID - Drain Current (A) 80 60 V GS = 6 V 40 60 TC = 25 °C 40 20 20 TC = 125 °C V GS = 4 V V GS = 5 V TC = - 55 °C 0 0 0 3 6 9 12 VDS - Drain-to-Source Voltage (V) 0 15 2 4 6 8 10 VGS - Gate-to-Source Voltage (V) Transfer Characteristics Output Characteristics 0.030 100 TC = 25 °C TC = - 55 °C RDS(on) - On-Resistance (Ω) 0.025 gfs - Transconductance (S) 80 60 TC = 125 °C 40 0.020 VGS = 10 V 0.015 0.010 0.005 20 0.000 0 0 0 12 24 36 48 20 40 60 80 100 60 ID - Drain Current (A) ID - Drain Current (A) On-Resistance vs. Drain Current Transconductance 10 3000 ID = 60 A VGS - Gate-to-Source Voltage (V) C - Capacitance (pF) 2500 Ciss 2000 1500 Coss 1000 500 8 VDS = 30 V 6 4 2 Crss 0 0 0 10 20 30 40 50 VDS - Drain-to-Source Voltage (V) 0 60 14 21 28 35 Qg - Total Gate Charge (nC) Gate Charge Capacitance S13-0840-Rev. A, 22-Apr-13 7 3 Document Number: 63554 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SQP60N06-15 www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted) 100 ID = 30 A 2.1 T J = 150 °C 10 V GS = 10 V I S - Source Current (A) RDS(on) - On-Resistance (Normalized) 2.5 1.7 1.3 0.9 1 T J = 25 °C 0.1 0.01 0.5 - 50 0.001 - 25 0 25 50 75 100 125 150 0 175 0.2 TJ - Junction Temperature (°C) 1.2 Source Drain Diode Forward Voltage 0.10 0.8 0.08 0.3 VGS(th) Variance (V) RDS(on) - On-Resistance (Ω) On-Resistance vs. Junction Temperature 0.4 0.6 0.8 1.0 VSD - Source-to-Drain Voltage (V) 0.06 0.04 T J = 150 °C - 0.2 ID = 5 mA - 0.7 ID = 250 μA - 1.2 0.02 T J = 25 °C - 1.7 - 50 0 0 2 4 6 8 VGS - Gate-to-Source Voltage (V) 10 - 25 On-Resistance vs. Gate-to-Source Voltage 0 25 50 75 100 TJ - Temperature (°C) 125 150 175 Threshold Voltage 80 VDS - Drain-to-Source Voltage (V) ID = 10 mA 76 72 68 64 60 - 50 - 25 0 25 50 75 100 125 150 175 TJ - Junction Temperature (°C) Drain Source Breakdown vs. Junction Temperature S13-0840-Rev. A, 22-Apr-13 4 Document Number: 63554 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SQP60N06-15 www.vishay.com Vishay Siliconix THERMAL RATINGS (TA = 25 °C, unless otherwise noted) 1000 ID - Drain Current (A) 100 100 μs IDM Limited 10 1 ms 10 ms 100 ms, 1 s,10 s, DC 1 Limited by RDS(on)* BVDSS Limited TC = 25 °C Single Pulse 0.1 0.01 0.01 0.1 1 10 100 VDS - Drain-to-Source Voltage (V) * VGS > minimum VGS at which RDS(on) is specified Safe Operating Area Normalized Effective Transient Thermal Impedance 1 0.1 0.01 0.001 0.0001 10-4 10-3 10-2 10-1 1 10 100 1000 Square Wave Pulse Duration (s) Normalized Thermal Transient Impedance, Junction-to-Ambient S13-0840-Rev. A, 22-Apr-13 5 Document Number: 63554 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SQP60N06-15 www.vishay.com Vishay Siliconix THERMAL RATINGS (TA = 25 °C, unless otherwise noted) 2 1 Normalized Effective Transient Thermal Impedance Duty Cycle = 0.5 0.2 0.1 0.1 0.05 0.02 Single Pulse 0.01 10-4 10-3 10-2 10-1 Square Wave Pulse Duration (s) 1 10 30 Normalized Thermal Transient Impedance, Junction-to-Case Note • The characteristics shown in the two graphs - Normalized Transient Thermal Impedance Junction-to-Ambient (25 °C) - Normalized Transient Thermal Impedance Junction-to-Case (25 °C) are given for general guidelines only to enable the user to get a “ball park” indication of part capabilities. The data are extracted from single pulse transient thermal impedance characteristics which are developed from empirical measurements. The latter is valid for the part mounted on printed circuit board - FR4, size 1" x 1" x 0.062", double sided with 2 oz. copper, 100 % on both sides. The part capabilities can widely vary depending on actual application parameters and operating conditions. Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?63554. S13-0840-Rev. A, 22-Apr-13 6 Document Number: 63554 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Ordering Information www.vishay.com Vishay Siliconix TO-220 Ordering codes for the SQ rugged series power MOSFETs in the TO-220 package: DATASHEET PART NUMBER OLD ORDERING CODE a NEW ORDERING CODE SQP100N04-3m6 - SQP100N04-3M6_GE3 SQP100P06-9m3L - SQP100P06-9M3L_GE3 SQP120N06-06 - SQP120N06-06_GE3 SQP120N06-3m5L SQP120N06-3M5L-GE3 SQP120N06-3M5L_GE3 SQP120N10-09 SQP120N10-09-GE3 SQP120N10-09_GE3 SQP120N10-3m8 SQP120N10-3M8-GE3 SQP120N10-3M8_GE3 SQP25N15-52 - SQP25N15-52_GE3 SQP50N06-09L SQP50N06-09L-GE3 SQP50N06-09L_GE3 SQP50P03-07 SQP50P03-07-GE3 SQP50P03-07_GE3 SQP60N06-15 SQP60N06-15-GE3 SQP60N06-15_GE3 SQP90P06-07L SQP90P06-07L-GE3 SQP90P06-07L_GE3 Note a. Old ordering code is obsolete and no longer valid for new orders Revision: 12-Nov-15 Document Number: 67167 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Package Information www.vishay.com Vishay Siliconix TO-220AB MILLIMETERS A E F D H(1) Q ØP 3 2 L(1) 1 M* L b(1) INCHES DIM. MIN. MAX. MIN. MAX. A 4.25 4.65 0.167 0.183 b 0.69 1.01 0.027 0.040 b(1) 1.20 1.73 0.047 0.068 c 0.36 0.61 0.014 0.024 D 14.85 15.49 0.585 0.610 D2 12.19 12.70 0.480 0.500 E 10.04 10.51 0.395 0.414 e 2.41 2.67 0.095 0.105 e(1) 4.88 5.28 0.192 0.208 F 1.14 1.40 0.045 0.055 H(1) 6.09 6.48 0.240 0.255 0.115 J(1) 2.41 2.92 0.095 L 13.35 14.02 0.526 0.552 L(1) 3.32 3.82 0.131 0.150 ØP 3.54 3.94 0.139 0.155 Q 2.60 3.00 0.102 0.118 ECN: T14-0413-Rev. P, 16-Jun-14 DWG: 5471 Note * M = 1.32 mm to 1.62 mm (dimension including protrusion) Heatsink hole for HVM C b e J(1) e(1) D2 Document Number: 71195 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Revison: 16-Jun-14 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000