Dimensions Camera LXC-20 / 40 LXC cameras – Extremely high resolution and speed Notice ▪▪ Camera Link progressive scan CMOS camera ▪▪ Excellent image quality ▪▪ Global shutter architecture for minimized motion blur ▪▪ Binning and true partial scan function (ROI) for increased frame rates ▪▪ High Dynamic Range (HDR) image acquisition ▪▪ External synchronization via industrial compliant process interface (trigger / flash) ▪▪ Power over Camera Link® (PoCL) support ▪▪ Two standard 26 pin Mini-Camera Link® connectors ▪▪ Support for Camera Link® Base, Medium, Full and EightyBit configurations ▪▪ Camera parameter programmable via GenCP protocol LXC-20 and LXC-40 have a C-mount interface only. 2048 × 1088 2048 × 2048 4096 × 3072 5120 × 3840 337 180 63 32 26 Pixel 0,0 4 x M3 x 6 17,5 8 19,2 47,95 43,05 8 26 Quick Start Guide LXC cameras (Camera Link®) 14,7 2/3“ 1“ APS-C 35 mm Monochrome / Color LXC-20M / C LXC-40M / C LXC-120M / C LXC-200M / C 26 Full Frames [max. fps] 20 18,035 ±0,025 17,5 Resolution 47 60 Sensor Size 48,8 4,9 60 47 Camera Type 8 1"-32 UN ® 30 Product Specification Latest software version and technical documentation are available at: Notice 8 x M3 x 6 Further technical details are available in the respective data sheet. www.baumer.com/vision/login Conformity / Safety 38,45 Dimensions Camera LXC-120 / 200 Lens Adapter for LXC-120 / 200 Conformity: ▪▪ Adapter M58 / F-mount (Art. No.: 11117852) 8 26 CE, RoHS Storage temp. Operating temp. Housing temp. Humidity -10 °C ... +70 °C +5 °C ... +50 °C max. +50 °C 10 % ... 90 % Non-condensing 14,7 20 ▪▪ Adapter M58 / M42x1-mount (26.8mm) (Art. No.: 11127232) 26 17,5 12 ±0,025 17,5 Environmental requirements: 48,8 60 47 8 Pixel 0,0 47,95 4 x M3 x 6 43,05 8 26 38,3 All LXC cameras comply with the recommendation of the European Union concerning RoHS Rules. ▪▪ Protect the sensor from dirt and moisture. ▪▪ Never open the camera housing. ▪▪ Avoid camera contamination by foreign objects. 60 RoHS Safety Precautions 47 We declare, under our sole responsibility, that the previously described Baumer LXC cameras conform with the directives of the CE. M58 x 0,75 CE 19,2 ▪▪ Adapter M58 / M42x1-mount (45.5 mm) (Art. No.: 11137781) ▪▪ Notice suitable for Zeiss (e.g. Distagon T* 2/25 Z-M42-I, Planar T* 1.4/50 Z-M42-I, Makro-Planar T* 2/50 Z-M42-I) and KOWA M42 lenses (e.g. LM28LF P-Mount, LM35LF P-Mount) 8 x M3 x 6 Further Information For further information on our products visit www.baumer.com For technical issues, please contact our technical support: [email protected] · Phone +49 (0)3528 4386-0 · Fax +49 (0)3528 4386-86 © Baumer Optronic GmbH · Badstrasse 30 · DE-01454 Radeberg, Germany Technical data has been fully checked, but accuracy of printed matter not guaranteed. Subject to change without notice. Printed in Germany 01/16. v1.0 11160606 38,45 ▪▪ Adapter M58 / C-mount (Art. No: 11115198) General Description LED Signaling 1 2 Installation Installation using Camera Link® Base: 3 ▪▪ Connect the camera using an appropriate cable to the framegrabber board on your PC using the lower sdr-26 jack on the camera side ▪▪ If required, connect a strobe to the connector LED 4 ▪▪ Connect the camera to power supply Installation sample 1 - Framegrabber board; 2 - CameraLink® cable; 3 - Process interface cable; 4 - Power cable 5 No. Description No. Description LXC-20 / 40 C-mount only 1 LXC-120 / 200 lens mount (M58), adapter for other lens mounts available Camera Link® socket 2 (Base) 3 4 Signaling-LED LED 5 Camera Link® socket Signal Meaning green on Power on, link good green blinking Power on, no link red on Error red blinking Boot proess or Warning (update in progress, don’t switch off) yellow Readout active (Medium / Full / EightyBit) Power Supply / Digital-IO Camera Link® sockets CL BASE Baumer CL FULL 4 2 8 6 Camera Link® (Base) Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 3 5 To use Power over Camera Link® (PoCL, 12V DC ± 20%), both Camera Link® sockets must be used. Signal GND X0X1X2XCLKX3SERTC+ SERTFGCC1CC2+ CC3CC4+ GND Pin 14 15 16 17 18 19 20 21 22 23 24 25 26 Camera Link® (Medium / Full / EightyBit) Signal GND X0+ X1+ X2+ XCLK+ X3+ SERTCSERTFG+ CC1+ CC2CC3+ CC4GND Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 Signal GND Y0Y1Y2YCLKY3100 Ω term. Z0Z1Z2ZCLKZ3GND Pin 14 15 16 17 18 19 20 21 22 23 24 25 26 Signal GND Y0+ Y1+ Y2+ YCLK+ Y3+ 100 Ω term. Z0+ Z1+ Z2+ ZCLK+ Z3+ GND 1 2 3 4 5 6 7 8 white brown green yellow grey pink blue red 7 1 not in use Power VCC+ IN 1 (line 0) IO GND IO Power VCC OUT 1 (line 1) Power GND not in use Caution Provide adequate dissipation of heat, to ensure that the temperature does not exceed +50 °C (+122 °F). The surface of the camera may be hot during operation and immediately after use. Be careful when handling the camera and avoid contact over a longer period. As there are numerous possibilities for installation, Baumer do not specifiy a specific method for proper heat dissipation, but suggest the following principles: ▪▪ operate the cameras only in mounted condition ▪▪ mounting in combination with forced convection may provide proper heat dissipation T Power Supply Power VCC ▪▪ Connect the camera to power supply Heat Transmission M8 / 8 pins wire colors of the connecting cable Notice ▪▪ If required, connect a strobe to the connector 1 - Framegrabber board; 2 - CameraLink® cable; 3 - Process interface cable; 4 - Power cable Power Supply / Digital-IO The camera has two Camera Link® sockets. To differentiate between Camera Link® socket, please look at the label. You can not use the CL Medium / Full / EightyBit socket alone! ▪▪ Connect the camera using two appropriate cables to the framegrabber board on your PC. Installation sample Power Supply and Process Interface Notice Type: XXXXXx (xxxxxxx) Installation using Camera Link® Medium / Full / EightyBit: T 12 VDC ... 24 VDC ± 20% Measure Point T Maximal Temperature +50 °C (122 °F)