EN

LXG cameras with Visual Applets (image preprocessing)
Notice
▪▪ Single Gigabit Ethernet progressive scan CMOS camera
▪▪ GigE VisionTM standard compliant
▪▪ True partial scan function (ROI) for increased frame rates
▪▪ High Dynamic Range (HDR) image acquisition
▪▪ External synchronization via industrial compliant process interface (trigger / flash)
▪▪ Global shutter architecture for minimized motion blur
▪▪ Power over Ethernet (PoE) support
▪▪ Standard RJ45 connectors
▪▪ Excellent image quality
▪▪ Camera parameter programmable in real-time
▪▪ VisualApplets based image preprocessing
LXG-40M.P has a C-Mount interface only.
Full Frames
[max. fps]
1“
APS-C
35 mm
2048 x 2048
4096 x 3072
5120 x 3840
74
25
16
19,7
8
Pixel 0,0
8 x M3 x 6
14,7
26
1"-32 UN
17,5
54,25
52,35
20
8
35,8
Monochrome / Color
LXG-40M.P
LXG-120M.P
LXG-200M.P
48,8
18,055 ±0,025
47
14,7
Resolution
6
60
26
Sensor Size
8
47
60
Camera Type
Quick Start Guide
LXG cameras with VisualApplets (Gigabit Ethernet)
Dimensions Camera LXG-40M.P
30
Product Specification
26
Latest software version and technical
documentation are available at:
8 x M3 x 6
www.baumer.com/vision/login
44,75
Conformity / Safety
Dimensions Camera LXG-120M.P / LXG-200M.P
Conformity:
Lens Adapter for LXG-120M.P / LXG-200M.P
8
▪▪ Adapter M58 / F-Mount (Art. No.: 11117852)
26
CE, RoHS
Storage temp.
Operating temp.
Housing temp.
Humidity
-10 °C ... +70 °C
+5 °C ... +50 °C
max. +50 °C
10 % ... 90 %
Non-condensing
14,7
17,5
19,7
12 ±0,25
47
▪▪ Adapter M58 / M42x1-MOUNT (45.5 mm) (Art. No.: 11137781)
Notice
Pixel 0,0
4 x M3 x 6
20
8
54,25
52,35
14,7
Environmental requirements:
▪▪ Adapter M58 / M42x1-Mount (26.8mm) (Art. No.: 11127232)
48,8
60
suitable for Zeiss (e.g. Distagon T* 2/25 Z-M42-I, Planar T* 1.4/50 Z-M42-I,
Makro-Planar T* 2/50 Z-M42-I) and KOWA M42 lenses (e.g. LM28LF P-Mount,
LM35LF P-Mount)
8
26
35,8
All LXG cameras with Visual Applets comply with the
recommendation of the European Union concerning RoHS
Rules.
▪▪ Protect the sensor from dirt and
moisture.
▪▪ Never open the camera housing.
▪▪ Avoid camera contamination by
foreign objects.
26
RoHS
Safety Precautions
47
60
We declare, under our sole responsibility, that the previously described Baumer LXG cameras with Visual Applets
conform with the directives of the CE.
M58 x 0,75
CE
Further Information
For further information on our products visit www.baumer.com
For technical issues, please contact our technical support:
[email protected] · Phone +49 (0)3528 4386-0 · Fax +49 (0)3528 4386-86
© Baumer Optronic GmbH · Badstrasse 30 · DE-01454 Radeberg, Germany
Technical data has been fully checked, but accuracy of printed matter not guaranteed.
Subject to change without notice. Printed in Germany 03/16.
v1.0
11162762
▪▪ Adapter M58 / C-Mount (Art. No: 11115198)
8 x M3 x 6
44,75
General Description
LED Signaling
1
2
Installation
Installation sample without PoE
3
LED
4
Description
No.
4
LXG-120M.P / LXG-200M.P
lens mount (M58), adapter for
other lens mounts available
2
Data Port 1 (PoE)
Description
3
Power Supply / Digital-IO
Signaling-LED
Camera
LED
5
Digital-IO (RS485)
Data Interface
Signal
Meaning
green on
Power on, link good
green blinking
Power on, no link
red on
Error
red blinking
Warning (update in progress, don’t switch off)
yellow
Readout active
Power and Process Interface #1
The Data port supports Power over Ethernet (36 VDC .. 57 VDC).
Data / Control
1000 Base-T
wire colors of the connecting cable
1
LED1
1
2
3
4
5
6
7
8
RJ45 LEDs
8
LED2
green/white
green
orange/white
blue
blue/white
orange
brown/white
brown
Signal
Meaning
green on
Link on
green blinking
Link activity
Amber on
GigE speed
Amber blinking
100 MB speed
MX1+
MX1MX2+
MX3+
MX3MX2MX4+
MX4-
SACC-DSI-M8FS-8CON-M10-L180 SH
4
Power and Process Interface #2 (RS485)
SACC-DSI-M8MS-8CON-M8-L180 SH
2
5
1
2
3
4
5
6
7
8
white
brown
green
yellow
grey
pink
blue
red
4
8
6
7
3
2
5
1
OUT 3 (line 3)
Power VCC+
IN 1 (line 0)
IO GND
IO Power VCC
OUT 1 (line 1)
Power GND
OUT 2 (line 2)
8
6
1
2
3
4
5
6
7
8
white
brown
green
yellow
grey
pink
blue
red
7
1
In2_RS485+ (line4)
In2_RS485- (line4)
In2_RS485+ (line5)
In2_RS485- (line5)
OUT3_In2_RS485+ (line6)
OUT3_In2_RS485- (line6)
external Power GND
external Power 5 V/200 mA
Power Supply
Power VCC
1 - network interface card (NIC)
2 - Injector
3 - network cable (with PoE)
4 - Process interface cable
5 - Process interface cable (RS485)
open wire
4
5
Heat Transmission
M8 / 8 pins wire colors of the connecting cable
3
4
Installation sample with PoE via Injector
Power Supply and Process Interfaces
Notice
open wire
1 - PoE network interface card (NIC)
2 - network cable (PoE)
3 - Process interface cable
4 - Process interface cable (RS485)
LXG-40M.P
C-Mount only.
1
4
Installation sample with PoE via NIC
5
No.
open wire
1 - network interface card
2 - network cable
3 - Process interface- / Power cable
4 - Process interface cable (RS485)
Caution
Provide adequate dissipation of heat, to ensure that the temperature
does not exceed +50 °C (+122 °F).
The surface of the camera may be hot during operation and immediately
after use. Be careful when handling the camera and avoid contact over a
longer period.
As there are numerous possibilities for installation, Baumer do not specifiy a specific method for proper heat dissipation, but suggest the following
principles:
▪▪ operate the cameras only in mounted condition
▪▪ mounting in combination with forced convection may provide proper
heat dissipation
T
T
12 VDC ... 24 VDC
Measure Point
T
Maximal Temperature
+50 °C (122 °F)