Product Specification Dimensions 2 x M3 x 4 Full Frames 30 8 x M3 x 4 Monochrome VCXU-23M 1/1.2” 1920 x 1200 VCXU-24M 1/1.2” 1920 x 1200 38 VCXU-31M 1/1.8” 2048 x 1536 120 VCXU-32M 1/1.8” 2048 x 1536 55 VCXU-50M 2/3" 2448 x 2048 76.9 VCXU-51M 2/3" 2448 x 2048 35 VCXU-23C 1/1.2” 1920 x 1200 165 VCXU-24C 1/1.2” 1920 x 1200 38 VCXU-31C 1/1.8” 2048 x 1536 120 VCXU-32C 1/1.8” 2048 x 1536 55 VCXU-50C 2/3" 2448 x 2048 76.9 VCXU-51C 2/3" 2448 x 2048 35 20 [max. fps] 22 Size Resolution 165 3 8,9 37,8 6,25 8,2 6,15 System Requirements Safety Safety Precautions Notice See the User's Guide for the complete safety instructions! Conformity: CE, RoHS We declare, under our sole responsibility, that the previously described Baumer VCXU cameras conform with the directives of the CE. RoHS All VCXU cameras comply with the recommendation of the European Union concerning RoHS Rules. CPU Caution Observe precautions for handling electrostatically sensitive devices! ▪▪ Protect the sensor from dirt and moisture. ▪▪ Do not allow the camera to become contaminated with foreign objects. Environmental Requirements Storage temp. Operating temp. Humidity -10°C ... +70°C see Heat Transmission 10 % ... 90 % Non-condensing Further Information For further information about our products, please visit www.baumer.com For technical issues, please contact our technical support: [email protected] · Phone +49 (0)3528 4386-845 · Fax +49 (0)3528 4386-86 © Baumer Optronic GmbH · Badstrasse 30 · DE-01454 Radeberg, Germany Technical data has been fully checked, but accuracy of printed matter is not guaranteed. Subject to change without notice. Printed in Germany 06/16. v1.1 11164112 6 Installation Single-camera system Multi-camera system Recommended Recommended Intel(R) Core(TM) i5-2520M Intel(R) Core(TM) i7-3770 CPU @ CPU @ 2.50GHz, Cores: 4 3.40GHz, Cores: 8 4 GB 8 GB RAM Operating Microsoft Windows 7 32 / 64 bit systems (required for USB 3.0) system Microsoft® Windows® 8 32 / 64 bit systems (required for USB 3.0) (OS) Microsoft® Windows® 10 32 / 64 bit systems (required for USB 3.0) ® 20 29 3 Notice Further technical details are available in the respective data sheets. www.baumer.com/vision/login CE 18 20 Latest software version and technical documentation available at: C-Mount 29 Color Quick Start Guide VCXU Cameras (USB 3.0) ø 28,7 Sensor Camera Type ® Lens mount Notice Ensure the sensor and lens are not contaminated with dust and airborne particles when mounting the support or the lens to the device! The following points are very important: ▪▪ Install the camera in an environment that is as dust free as possible! ▪▪ Keep the dust cover (bag) on the camera for as long as possible! ▪▪ Hold the camera with the sensor downwards if the sensor is uncovered. ▪▪ Avoid contact with any of the camera‘s optical surfaces! General Description Heat Transmission Images with USB 2.0 / LED signals 1 Caution Caution If the camera is connected to an USB2.0 port image transmission is disabled by default. The camera consumes more than 2.5W which is the maximum allowed by the USB2.0 specification.But there is a possibility to activate the image transmission at your own risk! Heat can damage the camera. Heat must be dissipated adequately to ensure that the temperature does not exceed the values in the table below. This activation could damage your computer´s hardware! 2 4 No. Description No. 1 Lens mount (C-Mount) 2 Digital IO 3 4 Procedure 1. Open the camera in the Camera Explorer. 2. Select the Profile GenICam Guru. 3. Activate the Feature USB2 Support Enable in the category Device Control. 4. Disconnect the data connection of the camera to the USB 2.0 port. 5. Connect the data connection of the camera to the USB 2.0 port. → Images will be transmitted via the USB 2.0 port. 3 Signal Meaning green flash Power on green USB 3.0 connection red USB 2.0 connection yellow Readout active red flash Update Description LED LED USB 3.0 port Data Interface / Digital IOs Installation ▪▪ operate the cameras only in mounted condition ▪▪ mounting in combination with forced convection may provide proper heat dissipation T Measurement Point Measurement Point (T) Maximum Temperature 65°C (149°F) Troubleshooting Installing the camera: USB 3.0 (Micro B) 1 23 45 As there are numerous possibilities for installation, Baumer recommends no specific method for proper heat dissipation, but suggest the following principles: ▪▪ Connect the camera to the USB connection on your PC using an appropriate cable. 6 7 8 9 10 ▪▪ If required, connect a trigger and / or flash to the digital IOs. 1 VBUS 6 MicB_SSTX- 2 D- 7 MicB_SSTX+ 3 D+ 8 GND_DRAIN 4 ID 9 MicB_SSRX- 5 GND 10 MicB_SSRX+ 1. Check camera operation using the LED signals. → If LED is red: • Camera is connected to USB 2.0 (settings possible). 2. Check connection using Windows Device Manager: open wire Digital IOs (on camera side) wire colors of the connecting cable (ordered separately) 6 7 5 1 4 8 3 2 → If device is not listed: • Check the host controller power supply. • Check USB 3.0 cable and connection. → If device is regularly not listed • Check USB 3.0 driver installation. 1 GPIO (Line2) white 5 Power VCC OUT1 grey 2 not connected brown 6 OUT1 (Line3) pink 3 IN1 (Line0) green 7 GND GPIO blue 4 GND IN1 yellow 8 GPIO (Line1) red Installation example 1 - PCI USB board 2 - USB cable 3 - Cable for trigger and flash