LXG cameras – Extremely high resolution and speed Notice ▪▪ Dual Gigabit Ethernet progressive scan CMOS camera ▪▪ GigE VisionTM standard compliant ▪▪ Binning and true partial scan function (ROI) for increased frame rates ▪▪ High Dynamic Range (HDR) image acquisition ▪▪ External synchronization via industrial compliant process interface (trigger / flash) ▪▪ Global shutter architecture for minimized motion blur ▪▪ Power over Ethernet (PoE) support ▪▪ Standard RJ45 connectors ▪▪ Excellent image quality ▪▪ Camera parameter programmable in real-time LXG-20 and LXG-40 have a C-Mount interface only. Full Frames [max. fps] 2/3“ 1“ 4/3“ APS-C 35 mm 2048 x 1088 2048 x 2048 3360 x 2496 4096 x 3072 5120 x 3840 111 59 29 19 12 Front View Side View 60 Back View 52,4 47 6 ±0,025 30 Latest software version and technical documentation are available at: 17,5 20 19,7 8 - M3 depth 6 C-Mount 1,9 8 www.baumer.com/vision/login Conformity / Safety Dimensions Camera LXG 80 / 120 / 200 Lens Adapter for LXG 80 / 120 / 200 Conformity: ▪▪ Adapter M58 / F-Mount (Art. No.: 11117852) CE, RoHS Bottom View -10 °C ... +70 °C +5 °C ... +50 °C max. +50 °C 10 % ... 90 % Non-condensing Side View 60 54,25 47 17,5 8 - M3 depth 6 20 11,2 Notice suitable for Zeiss (e.g. Distagon T* 2/25 Z-M42-I, Planar T* 1.4/50 Z-M42-I, Makro-Planar T* 2/50 Z-M42-I) and KOWA M42 lenses (e.g. LM28LF P-Mount, LM35LF P-Mount) Pixel 0,0 8 M58x0,75 Further Information For further information on our products visit www.baumer.com For technical issues, please contact our technical support: [email protected] · Phone +49 (0)3528 4386-0 · Fax +49 (0)3528 4386-86 © Baumer Optronic GmbH · Badstrasse 30 · DE-01454 Radeberg, Germany Technical data has been fully checked, but accuracy of printed matter not guaranteed. Subject to change without notice. Printed in Germany 07/15. v1.2 11129237 ▪▪ Adapter M58 / M42x1-MOUNT (45.5 mm) (Art. No.: 11137781) Back View 14,7 Storage temp. Operating temp. Housing temp. Humidity Front View 19,7 All LXG cameras comply with the recommendation of the European Union concerning RoHS Rules. Environmental requirements: 18,4 RoHS ▪▪ Protect the sensor from dirt and moisture. ▪▪ Never open the camera housing. ▪▪ Avoid camera contamination by foreign objects. 26 We declare, under our sole responsibility, that the previously described Baumer LXG cameras conform with the directives of the CE. ▪▪ Adapter M58 / M42x1-Mount (26.8mm) (Art. No.: 11127232) Safety Precautions 4 - M3 depth 6 CE 52,35 ▪▪ Adapter M58 / C-Mount (Art. No: 11115198) 11,2 14,7 Resolution 26 Monochrome / Color LXG-20M / C / NIR LXG-40M / C / NIR LXG-80M / C LXG-120M / C LXG-200M / C Sensor Size Bottom View 4 - M3 depth 6 Camera Type Quick Start Guide LXG cameras (Gigabit Ethernet) Dimensions Camera LXG 20 / 40 18,4 Product Specification General Description LED Signaling 1 2 Installation Installation sample without PoE 3 LED 4 Installation sample with PoE via NIC Description No. Description LXG-20 / 40 C-Mount only. 1 LXG-80 / 120 / 200 lens mount (M58), adapter for other lens mounts available 2 Data Port 1 (PoE) 3 Power Supply / Digital-IO 4 Signaling-LED LED 5 Data Port 2 Data Interfaces Signal Meaning green on Power on, link good green blinking Power on, no link red on Error red blinking Warning (update in progress, don’t switch off) yellow Readout active Data / Control Data / Control 1000 Base-T (Port 1) 1000 Base-T (Port 2) wire colors of the connecting cable Power Supply / Digital-IO M8 / 8 pins wire colors of the connecting cable LED1 1 2 3 4 5 6 7 8 LED2 green/white green orange/white blue blue/white orange brown/white brown LED1 MX1+ MX1MX2+ MX3+ MX3MX2MX4+ MX4- 1 2 3 4 5 6 7 8 2 8 6 LED2 green/white green orangeg/white blue blue/white orange brown/white brown 3 5 8 MX1+ MX1MX2+ MX3+ MX3MX2MX4+ MX4- 1 2 3 4 5 6 7 8 Data port 1 supports Power over Ethernet (36 VDC .. 57 VDC). 7 1 white brown green yellow grey pink blue red Notice OUT 3 Power VCC+ IN 1 IO GND IO Power VCC OUT 1 Power GND OUT 2 Power Supply Power VCC 1 - network interface card (NIC) 2 - network cable (without PoE) 3 - Injector 4 - network cable (with PoE) 5 - Process interface cable open wire 5 4 Heat Transmission 4 1 8 4 Installation sample with PoE via Injector Power Supply and Process Interface 1 open wire 1 - PoE network interface card (NIC) 2 - network cable (PoE) 3 - network cable (without PoE) 4 - Process interface cable 5 No. open wire 1 - network interface card 2 - network cable 3 - Process interface- / Power cable Caution Provide adequate dissipation of heat, to ensure that the temperature does not exceed +50 °C (+122 °F). The surface of the camera may be hot during operation and immediately after use. Be careful when handling the camera and avoid contact over a longer period. As there are numerous possibilities for installation, Baumer do not specifiy a specific method for proper heat dissipation, but suggest the following principles: ▪▪ operate the cameras only in mounted condition ▪▪ mounting in combination with forced convection may provide proper heat dissipation T T 12 VDC ... 24 VDC For the data transfer, the ports are equal. For Single GigE connect one port and for Dual GigE connect the second port additionally. The order does not matter. Measure Point T Maximal Temperature +50 °C (122 °F)