MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS D2PAK 3 CASE 418B−04 ISSUE L DATE 17 FEB 2015 SCALE 1:1 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. 418B−01 THRU 418B−03 OBSOLETE, NEW STANDARD 418B−04. C E V W −B− 4 DIM A B C D E F G H J K L M N P R S V A 1 2 S 3 −T− SEATING PLANE K W J G D H 3 PL 0.13 (0.005) M T B M VARIABLE CONFIGURATION ZONE N R P L M STYLE 1: PIN 1. BASE 2. COLLECTOR 3. EMITTER 4. COLLECTOR L M F F F VIEW W−W 1 VIEW W−W 2 VIEW W−W 3 STYLE 2: PIN 1. GATE 2. DRAIN 3. SOURCE 4. DRAIN MILLIMETERS MIN MAX 8.64 9.65 9.65 10.29 4.06 4.83 0.51 0.89 1.14 1.40 7.87 8.89 2.54 BSC 2.03 2.79 0.46 0.64 2.29 2.79 1.32 1.83 7.11 8.13 5.00 REF 2.00 REF 0.99 REF 14.60 15.88 1.14 1.40 U L M INCHES MIN MAX 0.340 0.380 0.380 0.405 0.160 0.190 0.020 0.035 0.045 0.055 0.310 0.350 0.100 BSC 0.080 0.110 0.018 0.025 0.090 0.110 0.052 0.072 0.280 0.320 0.197 REF 0.079 REF 0.039 REF 0.575 0.625 0.045 0.055 STYLE 3: PIN 1. ANODE 2. CATHODE 3. ANODE 4. CATHODE STYLE 4: PIN 1. GATE 2. COLLECTOR 3. EMITTER 4. COLLECTOR STYLE 5: STYLE 6: PIN 1. CATHODE PIN 1. NO CONNECT 2. ANODE 2. CATHODE 3. CATHODE 3. ANODE 4. ANODE 4. CATHODE MARKING INFORMATION AND FOOTPRINT ON PAGE 2 DOCUMENT NUMBER: STATUS: 98ASB42761B ON SEMICONDUCTOR STANDARD NEW STANDARD: © Semiconductor Components Industries, LLC, 2002 October, DESCRIPTION: 2002 − Rev. 0 D2PAK 3 http://onsemi.com 1 Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. Case Outline Number: PAGE 1 OFXXX 3 D2PAK 3 CASE 418B−04 ISSUE L DATE 17 FEB 2015 GENERIC MARKING DIAGRAM* xx xxxxxxxxx AWLYWWG xxxxxxxxG AYWW AYWW xxxxxxxxG AKA IC Standard Rectifier xx A WL Y WW G AKA = Specific Device Code = Assembly Location = Wafer Lot = Year = Work Week = Pb−Free Package = Polarity Indicator *This information is generic. Please refer to device data sheet for actual part marking. Pb−Free indicator, “G” or microdot “ G”, may or may not be present. SOLDERING FOOTPRINT* 10.49 8.38 16.155 2X 3.504 2X 1.016 5.080 PITCH DIMENSIONS: MILLIMETERS *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. DOCUMENT NUMBER: STATUS: 98ASB42761B ON SEMICONDUCTOR STANDARD NEW STANDARD: © Semiconductor Components Industries, LLC, 2002 October, DESCRIPTION: 2002 − Rev. 0 D2PAK 3 http://onsemi.com 2 Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. Case Outline Number: PAGE 2 OFXXX 3 DOCUMENT NUMBER: 98ASB42761B PAGE 3 OF 3 ISSUE REVISION DATE F ADDED BACK VIEW W−W OPTION B001 THRU B003. ADDED DIMS F, L, M, N, P, R AND U. ADDED D2PAK TO USED ON. REQ. BY D. CULBERTSON. 12 JUN 2001 G WRONG ISSUE. UPDATED TO ISSUE G. REQ. BY F. BLAKLEY. 09 JUL 2001 H ADDED STYLE 5. REQ. BY M. SCHAGER. 13 JAN 2003 J CORRECTED MARKING DIAGRAM. REQ. BY S. WEST. 30 AUG 2004 K CORRECTED SOLDERING FOOTPRINT. REQ. BY J. LETTERMAN. 03 SEP 2008 L ADDED STYLE 6. REQ. BY S. BROCK. 17 FEB 2015 ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. © Semiconductor Components Industries, LLC, 2015 February, 2015 − Rev. L Case Outline Number: 418B