PZHT www.vishay.com Vishay Sfernice High Temperature (230 °C) Zero Ohm Jumper SMD Thin Film Chip Resistor (Strap) FEATURES • Zero Ohm jumper • SMD wraparound Available • Sizes available: 02016 to 2512 • Thin film technology • Terminations: Gold or tin/silver Available • Resistance value < 30 m More and more, customers use SMD straps (0 ) to able or disable a function on their PCB. Vishay Sfernice offers straps in a wide range of standard dimensions: From 02016 to 2512. For applications requiring high temperature withstanding (up to 230 °C). • Maximum current through resistor: 0.5 A to 6.3 A Available • Temperature range: -55 °C to +230 °C • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 STANDARD ELECTRICAL SPECIFICATIONS MODEL SIZE RESISTANCE RANGE RATED POWER W AT 215°C MAXIMUM CURRENT A AT 215°C PZHT02016 02016 0 (max. 0.02) 0.002 0.28 PZHT0402 0402 0 (max. 0.02) 0.004 0.4 PZHT0603 0603 0 (max. 0.02) 0.008 0.56 PZHT0805 0805 0 (max. 0.02) 0.015 0.77 PZHT1206 1206 0 (max. 0.025) 0.025 1 PZHT2010 2010 0 (max. 0.025) 0.08 1.78 PZHT2512 2512 0 (max. 0.025) 0.1 2 CLIMATIC SPECIFICATIONS MECHANICAL SPECIFICATIONS Operating temperature range -55 °C; +215 °C Substrate Alumina Storage temperature range -55 °C; +230 °C Technology Thin film Film Terminations (1) Au or SnAg over nickel barrier G type: Au for HMP (high melting point) reflow process over nickel barrier P type: Au one face N type: SnAg for solder reflow over nickel barrier F type: SnAg one face Note (1) SnAg for temperatures up to 200 °C - Au for temperatures up to 230 °C Revision: 21-Jun-14 Document Number: 53056 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PZHT www.vishay.com Vishay Sfernice DIMENSIONS in millimeters One Face Termination PZHT02016 to PZHT2512 Side View L Wraparound Terminations PZHT0402 to PZHT2512 Active Face View Side View Bottom View L H D D TERMINATIONS MODEL PZHT02016 PZHT0402 PZHT0603 PZHT0805 PZHT1206 PZHT2010 PZHT2512 One face W H W Wraparound One face L Wraparound One face Wraparound H 0.42 ± 0.07 0.5 ± 0.127 0.5 ± 0.127 0.5 ± 0.127 0.5 ± 0.127 0.5 ± 0.127 0.5 ± 0.127 W 0.48 (± 0.1) n/a 1 ± 0.152 1.52 ± 0.152 1.91 ± 0.152 3.06 ± 0.152 5.08 ± 0.152 6.35 ± 0.152 0.39 (± 0.1) n/a 0.6 ± 0.127 0.85 ± 0.127 1.27 ± 0.127 1.6 ± 0.127 2.54 ± 0.127 3.3 ± 0.127 One face n/a n/a n/a n/a n/a n/a Wraparound D n/a 0.25 ± 0.1 0.38 ± 0.13 0.38 ± 0.13 0.40 ± 0.13 0.48 ± 0.13 0.48 ± 0.13 SUGGESTED LAND PATTERN in millimeters Gmin. Xmax. Zmax. TERMINATIONS MODEL PZHT02016 PZHT0402 PZHT0603 PZHT0805 PZHT1206 PZHT2010 PZHT2512 One face Wraparound One face Zmax. 0.55 1.15 1.67 2.06 3.21 5.23 6.5 n/a 1.55 2.37 2.76 3.91 5.93 7.20 n/a Rated Current (%) 800 600 350 300 250 150 400 100 200 50 50 100 150 200 250 Ambient Temperature in °C Revision: 21-Jun-14 n/a 0.73 0.98 1.40 1.73 2.67 3.32 CURRENT DERATED CURVE 1000 0 Wraparound 0.50 0.15 0.35 0.74 1.85 3.71 4.91 1200 0 One face Xmax. 0.15 POWER DERATING CURVE Rated Power (%) Wraparound Gmin. 0 0 50 100 150 200 250 Ambient Temperature in °C Document Number: 53056 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PZHT www.vishay.com Vishay Sfernice PACKAGING PACKAGING RULES Antistatic packaging: waffle pack or paper tape or low conductivity plastic tape. PZHT02016 only available in plastic tape. Waffle Pack Can be filled up to maximum quantity indicated in the table here above, taking into account the minimum order quantity. When quantity ordered exceeds maximum quantity of a single waffle pack, the waffle packs are stacked up on the top of each other and closed by one single cover. To get “not stacked up” waffle pack in case of ordered quantity > maximum number of pieces per package: Please consult Vishay Sfernice for specific ordering code. Tape and Reel Can be filled up to maximum quantity indicated in the table here above, taking into account the minimum order quantity. When quantity ordered is between the MOQ and the maximum reel capacity, only one reel is provided. When several reels are needed for ordered quantity within MOQ and maximum reel capacity: Please consult Vishay Sfernice for specific ordering code. Parts are packed: active face down. NUMBER OF PIECES PER PACKAGE SIZE MOQ 02016 n/a 0402 340 0603 0805 TAPE AND REEL WAFFLE PACK 2" × 2" MIN. MAX. 5000 100 100 TAPE WIDTH 100 4000 1206 140 2010 60 2000 2512 50 2000 8 mm GLOBAL PART NUMBER INFORMATION Global Part Numbering: PZHT1206-0R00NT P Z H T 1 2 0 6 - 0 R 0 0 N T GLOBAL MODEL SIZE OHMIC VALUE TERMINATION (1)(2) PACKAGING PZHT 02016 0402 0603 0805 1206 2010 2512 0 P = Au (one face) F = Tin/silver (one face) N = Tin/silver (wraparound) G = Au (wraparound) For more information see “Codification of packaging” table Notes (1) PZHT02016: one face termination only (2) P and G: for temperatures up to 230°C F and N: for temperatures up to 200°C CODIFICATION OF PACKAGING CODE 18 PACKAGING WAFFLE PACK W 100 min., 1 mult WA 100 min., 100 mult (available only in size 1206) PLASTIC TAPE (Standard for all sizes, not available for 0402.) T 100 min., 1 mult TA 100 min., 100 mult TB 250 min., 250 mult TC 500 min., 500 mult TD 1000 min., 1000 mult TE 2500min., 2500 mult TF Full tape (quantity depending on size of chips) PAPER TAPE (Standard for 0402, available for 0603, 0805, and 1206 but not available for 02016. Please consult Vishay Sfernice for other sizes.) PT 100 min., 1 mult PA 100 min., 100 mult PB 250 min., 250 mult PC 500 min., 500 mult PD 1000 min., 1000 mult PE 2500min., 2500 mult PF Full tape (quantity depending on size of chips) Revision: 21-Jun-14 Document Number: 53056 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000