TCMD1000, TCMD4000 www.vishay.com Vishay Semiconductors Optocoupler, Photodarlington Output, High Gain, Single/Quad Channel, Half Pitch Mini-Flat Package FEATURES 9 8 • Low profile package (half pitch) • AC isolation test voltage 3750 VRMS • Low coupling capacitance of typical 0.3 pF 16 pin • Low temperature coefficient of CTR 2 C C 1 A • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 4 pin E • Wide ambient temperature range APPICLATIONS • Programmable logic 17298_2 17298 • Modems C • Answering machines DESCRIPTION • General applications The TCMD1000, TCMD4000 consist of a photodarlington optically coupled to a gallium arsenide infrared-emitting diodes in either a 4 pin or 16 pin miniflat package. AGENCY APPROVALS • UL1577, file no. E76222 system code M, double protection The elements provide a fixed distance between input and output for highest safety requirements. • CSA 22.2 bulletin 5A, double protection • DIN EN 60747-5-5 (VDE 0884-5) • FIMKO • BSI ORDERING INFORMATION T C M D # 0 0 SOP-# 0 7 mm PART NUMBER AGENCY CERTIFIED/PACKAGE CTR (%) UL, cUL, FIMKO, BSI, VDE > 600 SOP-4 TCMD1000 SOP-16, quad channel TCMD4000 ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Reverse voltage VR 6 V Forward current IF 60 mA Forward surge current Power dissipation Junction temperature Rev. 2.2, 25-Oct-12 tP ≤ 10 μs IFSM 1.5 A Pdiss 100 mW Tj 125 °C Document Number: 83513 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TCMD1000, TCMD4000 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT Collector emitter voltage VCEO 35 V Emitter collector voltage VECO 7 V OUTPUT Collector current IC 80 mA ICM 100 mA Pdiss 150 mW Tj 125 °C VISO (1) 3750 VRMS Total power dissipation Ptot 250 mW Operating ambient temperature range Tamb - 40 to + 100 °C Storage temperature range Tstg - 40 to + 125 °C Soldering temperature (2) Tsld 260 °C tP/T = 0.5, tP ≤ 10 ms Collector peak current Power dissipation Junction temperature COUPLER AC isolation test voltage (RMS) Notes • Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (1) Related to standard climate 23/50 DIN 50014. (2) Wave soldering three cycles are allowed. Also refer to “Assembly Instruction” (www.vishay.com/doc?80054). ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. 1.6 UNIT input Forward voltage Junction capacitance IF = 50 mA VF 1.25 VR = 0 V, f = 1 MHz Cj 50 IC = 100 μA VCEO 35 7 V pF output Collector emitter voltage Emitter collector voltage V IE = 100 μA VECO VCE = 10 V, IF = 0, E = 0 ICEO 100 nA Collector emitter saturation voltage IF = 20 mA, IC = 5 mA VCEsat 1 V Cut-off frequency IF = 10 mA, VCE = 5 V, RL = 100 Ω fc 10 kHz f = 1 MHz Ck 0.3 pF Collector dark current V coupler Coupling capacitance Note • Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. CURRENT TRANSFER RATIO (Tamb = 25 °C, unless otherwise specified) PARAMETER IC/IF TEST CONDITION VCE = 2 V, IF = 1 mA PART SYMBOL MIN. TYP. TCMD1000 CTR 600 800 MAX. UNIT % TCMD4000 CTR 600 800 % SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL Rise time VCE = 2 V, IC = 10 mA, RL = 100 Ω (see figure 1) tr 300 μs Turn-off time VCE = 2 V, IC = 10 mA, RL = 100 Ω (see figure 1) toff 250 μs Rev. 2.2, 25-Oct-12 MIN. TYP. MAX. UNIT Document Number: 83513 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TCMD1000, TCMD4000 www.vishay.com Vishay Semiconductors IF IF 0 0 + V CC IF I C = 10 mA t p = 50 s 10 % 0 Channel I Channel II RL 14779 t 100 % 90 % R G = 50 Ω tp = 0.01 T 50 Ω tp IC tr Oscilloscope R I = 1 MΩ C I = 20 pF td ts t on tp td tr t on (= td + tr) Pulse duration Delay time Rise time Turn-on time Fig. 1 - Test Circuit, Non-Saturated Operation t tf t off ts tf t off (= ts + tf) Storage time Fall time Turn-off time 96 11698 Fig. 2 - Switching Times SAFETY AND INSULATION RATINGS PARAMETER TEST CONDITION Climatic classification SYMBOL MIN. IEC 68 part 1 Comparative tracking index TYP. MAX. UNIT 40/110/21 CTI 175 399 VIOTM 6000 V VIORM 707 V PSO 265 mW ISI 130 mA TSI 150 Creepage distance Clearance distance Insulation thickness, reinforce rated per IEC 60950 2.10.5.1 °C 5 mm 5 mm 0.4 mm Note • As per IEC 60747-5-2, § 7.4.3.8.1, this optocoupler is suitable for “safe electrical insulation” only within the safety ratings. Compliance with the safety ratings shall be ensured by means of protective circuits. 1.3 300 I F = 10 mA Coupled device 250 VF - Forward Voltage (V) Ptot - Total Power Dissipation (mW) TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 200 Phototransistor 150 IR-diode 100 50 1.2 1.1 1.0 0.9 0.8 0 0 96 11700 40 80 120 Tamb - Ambient Temperature (°C) Fig. 3 - Forward Voltage vs. Ambient Temperature Rev. 2.2, 25-Oct-12 0 14389 20 40 60 80 100 Tamb - Ambient Temperature (°C) Fig. 4 - Forward Voltage vs. Ambient Temperature Document Number: 83513 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TCMD1000, TCMD4000 www.vishay.com Vishay Semiconductors 1000 1000 IC - Collector Current (mA) I F - Forward Current (mA) VCE = 2 V 100 10 1 0.1 0.0 0.8 1.2 1.6 1 0.1 2.0 Fig. 5 - Forward Current vs. Forward Voltage 1 10 100 I F - Forward Current (mA) 14393 Fig. 8 - Collector Current vs. Forward Current 1.5 100 VCE = 5 V I F = 1 mA 1.4 1.3 1.2 1.1 1.0 0.9 0.8 0.7 I F = 2 mA I C - Collector Current (mA) CTR rel - Relative Current Transfer Ratio 10 0.1 0.4 V F - Forward Voltage (V) 14390 100 1 mA 10 0.5 mA 0.2 mA 1 0.1 mA 0.6 0.1 0.1 0.5 - 30 - 20 - 10 0 10 20 30 40 50 60 70 80 90 100 Fig. 6 - Relative Current Transfer Ratio vs. Ambient Temperature I CEO - Collector Dark Current, with Open Base (nA) 100 000 10 000 VCE = 10 V IF = 0 1000 100 10 1 20 14392 30 40 50 60 70 80 90 100 Tamb - Ambient Temperature (°C) Rev. 2.2, 25-Oct-12 10 100 Fig. 9 - Collector Current vs. Collector Emitter Voltage 1.1 CTR = 200 % used 1.0 100 % 0.9 50 % 25 % 0.8 0.7 0.6 14395 Fig. 7 - Collector Dark Current vs. Ambient Temperature 1 VCE - Collector Emitter Voltage (V) 14394 V CEsat - Collector Emitter Saturation Voltage (V) Tamb - Ambient Temperature (°C) 14391 1 10 100 I C - Collector Current (mA) Fig. 10 - Collector Emitter Saturation Voltage vs. Collector Current Document Number: 83513 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TCMD1000, TCMD4000 www.vishay.com Vishay Semiconductors CTR - Current Transfer Ratio (%) 10 000 VCE = 2 V 1000 100 10 0.1 14396 1 10 I F - Forward Current (mA) 100 Fig. 11 - Current Transfer Ratio vs. Forward Current PACKAGE DIMENSIONS in millimeters + 0.3 7 - 0.4 4.4 ± 0.2 1.9 0.1 ± 0.1 2.5 + 0.3 0.7 - 0.4 0.45 ± 0.1 1.27 nom. 4 0.15 +- 0.10 0.05 2.1 max. 2.8 max. 3 1.27 0.9 Possible footprint 5 7.6 1 2 Pin no. 1 identification technical drawings according to DIN specifications 16283 Rev. 2.2, 25-Oct-12 Document Number: 83513 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TCMD1000, TCMD4000 Vishay Semiconductors 7 10.12 4.4 + 0.3 - 0.4 ± 0.2 0.45 ± 0.1 + 0.3 - 0.4 0.15 0.7 + 0.10 - 0.05 0.1 ± 0.1 10.4 max. 1.9 2.1 max. www.vishay.com 1.27 nom. Possible footprint 7 x 1.27 = 8.89 15 14 13 12 11 10 9 1 2 3 4 5 6 7 8 1.27 0.9 8.89 16 5 Pin no. 1 identification 7.6 Drawing-No.: 6.544-5330.03-4 technical drawings according to DIN specifications Issue: 1; 04.04.00 15226 PACKAGE MARKING TCMD4000 MD1000 V YWW M 68 V YWW M 68 21764-15 21764-16 Rev. 2.2, 25-Oct-12 Document Number: 83513 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000