SGP02N60 SGD02N60 Fast IGBT in NPT-technology C • 75% lower Eoff compared to previous generation combined with low conduction losses • Short circuit withstand time – 10 µs • Designed for: - Motor controls - Inverter • NPT-Technology for 600V applications offers: - very tight parameter distribution - high ruggedness, temperature stable behaviour PG-TO-252-3-1 (D-PAK) PG-TO-220-3-1 - parallel switching capability (TO-252AA) (TO-220AB) • Pb-free lead plating; RoHS compliant 2 • Qualified according to JEDEC for target applications • Complete product spectrum and PSpice Models : http://www.infineon.com/igbt/ Type VCE IC VCE(sat)150°C Tj Marking SGP02N60 600V 2A 2.2V 150°C G10N60 PG-TO-220-3-1 SGD02N60 600V 2A 2.2V 150°C G10N60 PG-TO-252-3-11 G E Package Maximum Ratings Parameter Symbol Collector-emitter voltage VCE DC collector current IC Value 600 Unit V A TC = 25°C 6.0 TC = 100°C 2.9 Pulsed collector current, tp limited by Tjmax ICpul s 12 Turn off safe operating area - 12 Gate-emitter voltage VGE ±20 V Avalanche energy, single pulse EAS 13 mJ tSC 10 µs Ptot 30 W -55...+150 °C VCE ≤ 600V, Tj ≤ 150°C IC = 2 A, VCC = 50 V, RGE = 25 Ω , start at Tj = 25°C 1) Short circuit withstand time VGE = 15V, VCC ≤ 600V, Tj ≤ 150°C Power dissipation TC = 25°C Operating junction and storage temperature Tj , Tstg Soldering temperature, Ts 260 wavesoldering, 1.6mm (0.063 in.) from case for 10s 2 1) J-STD-020 and JESD-022 Allowed number of short circuits: <1000; time between short circuits: >1s. 1 Rev. 2.3 Sep 07 SGP02N60 SGD02N60 Thermal Resistance Parameter Symbol Conditions Max. Value Unit 4.2 K/W Characteristic RthJC IGBT thermal resistance, junction – case Thermal resistance, RthJA PG-TO-220-3-1 62 RthJA PG-TO-252-3-1 50 junction – ambient 1) SMD version, device on PCB Electrical Characteristic, at Tj = 25 °C, unless otherwise specified Parameter Symbol Conditions Value min. Typ. max. 600 - - 1.7 1.9 2.4 T j =1 5 0° C - 2.2 2.7 3 4 5 Unit Static Characteristic Collector-emitter breakdown voltage V ( B R ) C E S V G E = 0V , I C = 5 00 µA Collector-emitter saturation voltage VCE(sat) V V G E = 15 V , I C = 2 A T j =2 5 °C Gate-emitter threshold voltage VGE(th) I C = 15 0 µA , V C E = V G E Zero gate voltage collector current ICES V C E = 60 0 V, V G E = 0 V µA T j =2 5 °C - - 20 T j =1 5 0° C - - 250 Gate-emitter leakage current IGES V C E = 0V , V G E =2 0 V - - 100 nA Transconductance gfs V C E = 20 V , I C = 2 A - 1.6 - S Input capacitance Ciss V C E = 25 V , - 142 170 pF Output capacitance Coss V G E = 0V , - 18 22 Reverse transfer capacitance Crss f= 1 MH z - 10 12 Gate charge QGate V C C = 48 0 V, I C =2 A - 14 18 nC - 7 - nH - 20 - A Dynamic Characteristic V G E = 15 V LE Internal emitter inductance measured 5mm (0.197 in.) from case 2) Short circuit collector current IC(SC) V G E = 15 V ,t S C ≤ 10 µs V C C ≤ 6 0 0 V, T j ≤ 1 5 0° C 1) 2 Device on 50mm*50mm*1.5mm epoxy PCB FR4 with 6cm (one layer, 70µm thick) copper area for collector connection. PCB is vertical without blown air. 2) Allowed number of short circuits: <1000; time between short circuits: >1s. 2 Rev. 2.3 Sep 07 SGP02N60 SGD02N60 Switching Characteristic, Inductive Load, at Tj=25 °C Parameter Symbol Conditions Value min. typ. max. - 20 24 - 13 16 - 259 311 - 52 62 - 0.036 0.041 - 0.028 0.036 - 0.064 0.078 Unit IGBT Characteristic Turn-on delay time td(on) Rise time tr Turn-off delay time td(off) Fall time tf Turn-on energy Eon Turn-off energy Eoff Total switching energy Ets T j =2 5 °C , V C C = 40 0 V, I C = 2 A, V G E = 0/ 15 V , R G = 11 8Ω , 1) L σ = 18 0 nH , 1) C σ = 18 0 pF Energy losses include “tail” and diode reverse recovery. ns mJ Switching Characteristic, Inductive Load, at Tj=150 °C Parameter Symbol Conditions Value min. typ. max. - 20 24 - 14 17 - 287 344 - 67 80 - 0.054 0.062 - 0.043 0.056 - 0.097 0.118 Unit IGBT Characteristic Turn-on delay time td(on) Rise time tr Turn-off delay time td(off) Fall time tf Turn-on energy Eon Turn-off energy Eoff Total switching energy Ets 1) T j =1 5 0° C, V C C = 40 0 V, I C =2 A , V G E = 0/ 15 V , R G = 11 8Ω , 1) L σ = 18 0 nH , 1) C σ = 18 0 pF Energy losses include “tail” and diode reverse recovery. ns mJ Leakage inductance L σ a nd Stray capacity C σ due to dynamic test circuit in Figure E. 3 Rev. 2.3 Sep 07 SGP02N60 SGD02N60 16A Ic t p =2 µ s 10A 14A IC, COLLECTOR CURRENT IC, COLLECTOR CURRENT 12A 10A T C =80°C 8A 6A 4A 2A 0A 10Hz T C =110°C 15 µ s 1A 50 µ s 200 µ s 0.1A 1ms DC Ic 0.01A 100Hz 1kHz 10kHz 1V 100kHz 35W 7A 30W 6A 25W 5A 20W 15W 10W 5W 0W 25°C 100V 1000V VCE, COLLECTOR-EMITTER VOLTAGE Figure 2. Safe operating area (D = 0, TC = 25°C, Tj ≤ 150°C) IC, COLLECTOR CURRENT Ptot, POWER DISSIPATION f, SWITCHING FREQUENCY Figure 1. Collector current as a function of switching frequency (Tj ≤ 150°C, D = 0.5, VCE = 400V, VGE = 0/+15V, RG = 118Ω) 10V 4A 3A 2A 1A 50°C 75°C 100°C 0A 25°C 125°C TC, CASE TEMPERATURE Figure 3. Power dissipation (IGBT) as a function of case temperature (Tj ≤ 150°C) 50°C 75°C 100°C 125°C TC, CASE TEMPERATURE Figure 4. Collector current as a function of case temperature (VGE ≤ 15V, Tj ≤ 150°C) 4 Rev. 2.3 Sep 07 7A 7A 6A 6A 5A V G E =20V IC, COLLECTOR CURRENT IC, COLLECTOR CURRENT SGP02N60 SGD02N60 15V 4A 13V 11V 3A 9V 7V 2A 5V 1V 2V 3V 4V 13V 11V 3A 9V 2A 7V 5V 7A Tj=+25°C 6A -55°C +150°C 5A 4A 3A 2A 1A 2V 4V 6V 8V 10V 1V 2V 3V 4V 5V VCE, COLLECTOR-EMITTER VOLTAGE Figure 6. Typical output characteristics (Tj = 150°C) VCE(sat), COLLECTOR-EMITTER SATURATION VOLTAGE 8A IC, COLLECTOR CURRENT 15V 4A 0A 0V 5V VCE, COLLECTOR-EMITTER VOLTAGE Figure 5. Typical output characteristics (Tj = 25°C) 0A 0V V G E =20V 1A 1A 0A 0V 5A VGE, GATE-EMITTER VOLTAGE Figure 7. Typical transfer characteristics (VCE = 10V) 4.0V 3.5V IC = 4A 3.0V 2.5V IC = 2A 2.0V 1.5V 1.0V -50°C 0°C 50°C 100°C 150°C Tj, JUNCTION TEMPERATURE Figure 8. Typical collector-emitter saturation voltage as a function of junction temperature (VGE = 15V) 5 Rev. 2.3 Sep 07 SGP02N60 SGD02N60 t d(off) tf 100ns t, SWITCHING TIMES t, SWITCHING TIMES t d(off) td(on) tf 100ns t d(on) tr 10ns 0A 1A 2A 3A 4A tr 10ns 0Ω 5A IC, COLLECTOR CURRENT Figure 9. Typical switching times as a function of collector current (inductive load, Tj = 150°C, VCE = 400V, VGE = 0/+15V, RG = 11 8Ω, Dynamic test circuit in Figure E) 300 Ω 400 Ω RG, GATE RESISTOR Figure 10. Typical switching times as a function of gate resistor (inductive load, Tj = 150°C, VCE = 400V, VGE = 0/+15V, IC = 2A, Dynamic test circuit in Figure E) VGE(th), GATE-EMITTER THRESHOLD VOLTAGE t, SWITCHING TIMES 200 Ω 5.5V t d(off) 100ns tf t d(on) tr 10ns 0°C 100 Ω 50°C 100°C 5.0V 4.5V 4.0V max. 3.5V 3.0V typ. 2.5V min. 2.0V 150°C -50°C Tj, JUNCTION TEMPERATURE Figure 11. Typical switching times as a function of junction temperature (inductive load, VCE = 400V, VGE = 0/+15V, IC = 2A, RG = 1 1 8Ω, Dynamic test circuit in Figure E) 0°C 50°C 100°C 150°C Tj, JUNCTION TEMPERATURE Figure 12. Gate-emitter threshold voltage as a function of junction temperature (IC = 0.15mA) 6 Rev. 2.3 Sep 07 SGP02N60 SGD02N60 0.2mJ *) Eon and Ets include losses due to diode recovery. 0.2mJ E, SWITCHING ENERGY LOSSES E, SWITCHING ENERGY LOSSES *) Eon and Ets include losses due to diode recovery. E ts * E on * 0.1mJ E off E ts * 0.1mJ E on * E off 0.0mJ 0A 1A 2A 3A 4A 0.0mJ 0Ω 5A IC, COLLECTOR CURRENT Figure 13. Typical switching energy losses as a function of collector current (inductive load, Tj = 150°C, VCE = 400V, VGE = 0/+15V, RG = 11 8Ω, Dynamic test circuit in Figure E) 100 Ω 200 Ω 300 Ω 400 Ω RG, GATE RESISTOR Figure 14. Typical switching energy losses as a function of gate resistor (inductive load, Tj = 150°C, VCE = 400V, VGE = 0/+15V, IC = 2A, Dynamic test circuit in Figure E) 0.2mJ D=0.5 E ts * E on * 0.1mJ E off 0.0mJ 0°C 50°C 100°C ZthJC, TRANSIENT THERMAL IMPEDANCE E, SWITCHING ENERGY LOSSES *) Eon and Ets include losses due to diode recovery. 150°C 0 10 K/W 0.2 0.1 0.05 0.02 R,(K/W) 1.026 1.3 1.69 0.183 -1 10 K/W 0.01 τ, (s) 0.035 3.62*10-3 4.02*10-4 4.21*10-5 R1 R2 -2 10 K/W 1µs single pulse 10µs 100µs C 1 = τ 1 / R 1 C 2 = τ 2 /R 2 1m s 10m s 100m s 1s tp, PULSE WIDTH Tj, JUNCTION TEMPERATURE Figure 15. Typical switching energy losses as a function of junction temperature (inductive load, VCE = 400V, VGE = 0/+15V, IC = 2A, RG = 1 1 8Ω, Dynamic test circuit in Figure E) Figure 16. IGBT transient thermal impedance as a function of pulse width (D = tp / T) 7 Rev. 2.3 Sep 07 SGP02N60 SGD02N60 25V C iss 15V 120V C, CAPACITANCE VGE, GATE-EMITTER VOLTAGE 20V 480V 10V 100pF C oss 5V 10pF C rss 0V 0nC 5nC 10nC 15nC 0V QGE, GATE CHARGE Figure 17. Typical gate charge (IC = 2A) 30V 40A IC(sc), SHORT CIRCUIT COLLECTOR CURRENT tsc, SHORT CIRCUIT WITHSTAND TIME 20V VCE, COLLECTOR-EMITTER VOLTAGE Figure 18. Typical capacitance as a function of collector-emitter voltage (VGE = 0V, f = 1MHz) 25 µ s 20 µ s 15 µ s 10 µ s 5µ s 0µ s 10V 10V 11V 12V 13V 14V 30A 20A 10A 0A 10V 15V VGE, GATE-EMITTER VOLTAGE Figure 19. Short circuit withstand time as a function of gate-emitter voltage (VCE = 600V, start at Tj = 25°C) 12V 14V 16V 18V 20V VGE, GATE-EMITTER VOLTAGE Figure 20. Typical short circuit collector current as a function of gate-emitter voltage (VCE ≤ 600V,Tj = 150°C) 8 Rev. 2.3 Sep 07 SGP02N60 SGD02N60 PG-TO220-3-1 9 Rev. 2.3 Sep 07 SGP02N60 SGD02N60 PG-TO252-3-11 10 Rev. 2.3 Sep 07 SGP02N60 SGD02N60 τ1 τ2 r1 r2 τn rn Tj (t) p(t) r1 r2 rn TC Figure D. Thermal equivalent circuit Figure A. Definition of switching times Figure B. Definition of switching losses Figure E. Dynamic test circuit Leakage inductance Lσ =180nH an d Stray capacity C σ =180pF. 11 Rev. 2.3 Sep 07 SGP02N60 SGD02N60 Edition 2006-01 Published by Infineon Technologies AG 81726 München, Germany © Infineon Technologies AG 9/12/07. All Rights Reserved. Attention please! The information given in this data sheet shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. 12 Rev. 2.3 Sep 07