SGP10N60A Data Sheet (348 KB, EN)

SGP10N60A
SGW10N60A
Fast IGBT in NPT-technology
C
• 75% lower Eoff compared to previous generation
combined with low conduction losses
• Short circuit withstand time – 10 µs
G
E
• Designed for:
- Motor controls
- Inverter
PG-TO-247-3
• NPT-Technology for 600V applications offers:
- very tight parameter distribution
- high ruggedness, temperature stable behaviour
- parallel switching capability
PG-TO-220-3-1
• Qualified according to JEDEC1 for target applications
• Pb-free lead plating; RoHS compliant
• Complete product spectrum and PSpice Models : http://www.infineon.com/igbt/
VCE
IC
VCE(sat)
Tj
Marking
Package
SGP10N60A
600V
10A
2.3V
150°C
G10N60A
PG-TO-220-3-1
SGW10N60A
600V
10A
2.3V
150°C
G10N60A
PG-TO-247-3
Parameter
Symbol
Value
Collector-emitter voltage
VCE
DC collector current
IC
Type
Maximum Ratings
600
Unit
V
A
TC = 25°C
20
TC = 100°C
10.6
Pulsed collector current, tp limited by Tjmax
ICpuls
40
Turn off safe operating area
-
40
Gate-emitter voltage
VGE
±20
V
Avalanche energy, single pulse
EAS
70
mJ
tSC
10
µs
Ptot
92
W
-55...+150
°C
VCE ≤ 600V, Tj ≤ 150°C
IC = 10 A, VCC = 50 V, RGE = 25 Ω,
start at Tj = 25°C
Short circuit withstand time2
VGE = 15V, VCC ≤ 600V, Tj ≤ 150°C
Power dissipation
TC = 25°C
Operating junction and storage temperature
Tj , Tstg
Soldering temperature,
Ts
260
wavesoldering, 1.6mm (0.063 in.) from case for 10s
1
2
J-STD-020 and JESD-022
Allowed number of short circuits: <1000; time between short circuits: >1s.
1
Rev. 2.5
Nov 09
SGP10N60A
SGW10N60A
Thermal Resistance
Parameter
Symbol
Conditions
Max. Value
Unit
1.35
K/W
Characteristic
IGBT thermal resistance,
RthJC
junction – case
Thermal resistance,
RthJA
junction – ambient
PG-TO-220-3-1
62
PG-TO-247-3-21
40
Electrical Characteristic, at Tj = 25 °C, unless otherwise specified
Parameter
Symbol
Conditions
Value
min.
Typ.
max.
600
-
-
1.7
2
2.4
T j = 15 0° C
-
2.3
2.8
3
4
5
Unit
Static Characteristic
Collector-emitter breakdown voltage
V ( B R ) C E S V G E = 0V, I C = 50 0µA
Collector-emitter saturation voltage
VCE(sat)
V
V G E = 15V, I C = 10A
T j = 25° C
Gate-emitter threshold voltage
VGE(th)
I C = 30 0µA, V C E =V G E
Zero gate voltage collector current
ICES
V C E = 600V ,V G E = 0V
µA
T j = 25° C
-
-
40
-
1500
T j = 15 0° C
-
Gate-emitter leakage current
IGES
V C E = 0V ,V G E = 2 0V
-
-
100
nA
Transconductance
gfs
V C E = 20V, I C = 10A
-
6.7
-
S
Ciss
V C E = 25V,
-
550
660
pF
Output capacitance
Coss
V G E = 0V,
-
62
75
Reverse transfer capacitance
Crss
f= 1 M Hz
-
42
51
Gate charge
QGate
V C C = 4 80V, I C = 10A
-
52
68
nC
Internal emitter inductance
LE
PG -TO -220-3-1
-
7
-
nH
PG -TO -247-3-21
-
13
-
V G E = 1 5V,t S C ≤10µs
V C C ≤ 600V,
T j ≤ 150° C
-
100
-
Dynamic Characteristic
Input capacitance
V G E = 1 5V
measured 5mm (0.197 in.) from case
Short circuit collector current
2)
2)
IC(SC)
A
Allowed number of short circuits: <1000; time between short circuits: >1s.
2
Rev. 2.5
Nov 09
SGP10N60A
SGW10N60A
Switching Characteristic, Inductive Load, at Tj=25 °C
Parameter
Symbol
Conditions
Value
min.
typ.
max.
-
28
34
-
12
15
-
178
214
-
24
29
-
0.15
0.173
-
0.17
0.221
-
0.320
0.394
Unit
IGBT Characteristic
Turn-on delay time
td(on)
Rise time
tr
Turn-off delay time
td(off)
Fall time
tf
Turn-on energy
Eon
Turn-off energy
Eoff
Total switching energy
Ets
T j = 25° C,
V C C = 4 00V, I C = 10A,
V G E = 0/ 1 5V ,
R G = 2 5Ω ,
L σ 1 ) = 18 0n H ,
C σ 1 ) = 55pF
Energy losses include
“tail” and diode
reverse recovery.
ns
mJ
Switching Characteristic, Inductive Load, at Tj=150 °C
Parameter
Symbol
Conditions
Value
min.
typ.
max.
-
28
34
-
12
15
-
198
238
Unit
IGBT Characteristic
Turn-on delay time
td(on)
Rise time
tr
Turn-off delay time
td(off)
Fall time
tf
Turn-on energy
Eon
Turn-off energy
Eoff
Total switching energy
Ets
1)
T j = 15 0° C
V C C = 4 00V, I C = 10A,
V G E = 0/ 1 5V ,
R G = 2 5Ω
L σ 1 ) = 18 0n H ,
1)
C σ = 55pF
Energy losses include
“tail” and diode
reverse recovery.
-
26
32
-
0.260
0.299
-
0.280
0.364
-
0.540
0.663
ns
mJ
Leakage inductance L σ and Stray capacity C σ due to dynamic test circuit in Figure E.
3
Rev. 2.5
Nov 09
SGP10N60A
SGW10N60A
50A
t p = 5 µs
Ic
40A
10A
IC, COLLECTOR CURRENT
IC, COLLECTOR CURRENT
T C =80°c
30A
20A
10A
T C =110°c
Ic
15 µs
50 µs
200 µs
1A
1m s
DC
0,1A
0A
10Hz
100Hz
1kHz
10kHz 100kHz
1V
f, SWITCHING FREQUENCY
Figure 1. Collector current as a function of
switching frequency
(Tj ≤ 150°C, D = 0.5, VCE = 400V,
VGE = 0/+15V, RG = 25Ω)
1000V
25A
10 0W
IC, COLLECTOR CURRENT
20A
8 0W
6 0W
4 0W
Ptot,
POWER DISSIPATION
100V
VCE, COLLECTOR-EMITTER VOLTAGE
Figure 2. Safe operating area
(D = 0, TC = 25°C, Tj ≤ 150°C)
12 0W
2 0W
0W
25 °C
10V
50°C
75 °C
1 00°C
15A
10A
5A
0A
2 5 °C
125 °C
TC, CASE TEMPERATURE
Figure 3. Power dissipation as a function
of case temperature
(Tj ≤ 150°C)
5 0 °C
7 5 °C
1 0 0 °C
1 2 5 °C
TC, CASE TEMPERATURE
Figure 4. Collector current as a function of
case temperature
(VGE ≤ 15V, Tj ≤ 150°C)
4
Rev. 2.5
Nov 09
35A
35A
30A
30A
IC, COLLECTOR CURRENT
IC, COLLECTOR CURRENT
SGP10N60A
SGW10N60A
25A
V GE=20V
20A
15V
13V
15A
11V
9V
10A
7V
5V
1V
2V
20A
15A
15V
13V
11V
9V
10A
7V
5V
3V
4V
0A
0V
5V
1V
2V
3V
4V
5V
VCE, COLLECTOR-EMITTER VOLTAGE
Figure 6. Typical output characteristics
(Tj = 150°C)
35A
3,5V
T j=+25°C
+150°C
25A
20A
15A
10A
5A
0A
0V
2V
4V
6V
8V
10V
VCE(sat), COLLECTOR-EMITTER SATURATION VOLTAGE
VCE, COLLECTOR-EMITTER VOLTAGE
Figure 5. Typical output characteristics
(Tj = 25°C)
30A
IC, COLLECTOR CURRENT
V GE= 20 V
5A
5A
0A
0V
25A
VGE, GATE-EMITTER VOLTAGE
Figure 7. Typical transfer characteristics
(VCE = 10V)
I C = 20A
3,0V
2,5V
I C = 10 A
2,0V
1,5V
0°C
I C =5A
50°C
100°C
150°C
Tj, JUNCTION TEMPERATURE
Figure 8. Typical collector-emitter
saturation voltage as a function of junction
temperature
(VGE = 15V)
5
Rev. 2.5
Nov 09
SGP10N60A
SGW10N60A
t, SWITCHING TIMES
t, SWITCHING TIMES
t d(off)
100ns
tf
td(on)
tr
10ns
0A
5A
10A
15A
20A
100ns
t d (o ff)
tf
t d (o n )
10ns
0Ω
25A
IC, COLLECTOR CURRENT
Figure 9. Typical switching times as a
function of collector current
(inductive load, Tj = 150°C, VCE = 400V,
VGE = 0/+15V, RG = 25Ω,
Dynamic test circuit in Figure E)
tr
20 Ω
40 Ω
60 Ω
80 Ω
RG, GATE RESISTOR
Figure 10. Typical switching times as a
function of gate resistor
(inductive load, Tj = 150°C, VCE = 400V,
VGE = 0/+15V, IC = 10A,
Dynamic test circuit in Figure E)
t, SWITCHING TIMES
t d(o ff)
100ns
t d(o n)
tf
10ns
0°C
tr
50°C
100°C
150°C
VGE(th), GATE-EMITTER THRESHOLD VOLTAGE
5 ,5 V
5 ,0 V
4 ,5 V
4 ,0 V
3 ,5 V
m ax.
3 ,0 V
2 ,5 V
ty p .
2 ,0 V
1 ,5 V
m in .
1 ,0 V
-5 0 ° C
Tj, JUNCTION TEMPERATURE
Figure 11. Typical switching times as a
function of junction temperature
(inductive load, VCE = 400V, VGE = 0/+15V,
IC = 10A, RG = 25Ω,
Dynamic test circuit in Figure E)
0°C
50°C
100°C
150°C
Tj, JUNCTION TEMPERATURE
Figure 12. Gate-emitter threshold voltage
as a function of junction temperature
(IC = 0.3mA)
6
Rev. 2.5
Nov 09
SGP10N60A
SGW10N60A
1,6m J
E ts *
1,2m J
1,0m J
0,8m J
E on *
0,6m J
E off
0,4m J
0,2m J
0,0m J
0A
5A
10A
15A
20A
E, SWITCHING ENERGY LOSSES
1,4m J
E, SWITCHING ENERGY LOSSES
1,0m J
*) Eon and Ets include losses
due to diode recovery.
0,4m J
E on *
20 Ω
40 Ω
60 Ω
80 Ω
0
0,4mJ
E ts*
E off
E on*
0,0mJ
0°C
E off
10 K/W
0,6mJ
0,2mJ
0,6m J
RG, GATE RESISTOR
Figure 14. Typical switching energy losses
as a function of gate resistor
(inductive load, Tj = 150°C, VCE = 400V,
VGE = 0/+15V, IC = 10A,
Dynamic test circuit in Figure E)
ZthJC, TRANSIENT THERMAL IMPEDANCE
E, SWITCHING ENERGY LOSSES
*) Eon and Ets include losses
due to diode recovery.
E ts *
0,8m J
0,2m J
0Ω
25A
IC, COLLECTOR CURRENT
Figure 13. Typical switching energy losses
as a function of collector current
(inductive load, Tj = 150°C, VCE = 400V,
VGE = 0/+15V, RG = 25Ω,
Dynamic test circuit in Figure E)
0,8mJ
*) Eon and Ets include losses
due to diode recovery.
D=0.5
0.2
0.1
-1
10 K/W
R,(K/W)
0.4287
0.4830
0.4383
0.05
0.02
-2
10 K/W 0.01
τ, (s)
0.0358
-3
4.3*10
-4
3.46*10
R1
single pulse
R2
C 1 = τ 1 /R 1 C 2 = τ 2 /R 2
-3
50°C
100°C
10 K/W
1µs
150°C
10µs
100µs
1m s
10m s 100m s
1s
tp, PULSE WIDTH
Tj, JUNCTION TEMPERATURE
Figure 15. Typical switching energy losses
as a function of junction temperature
(inductive load, VCE = 400V, VGE = 0/+15V,
IC = 10A, RG = 25Ω,
Dynamic test circuit in Figure E)
Figure 16. IGBT transient thermal
impedance as a function of pulse width
(D = tp / T)
7
Rev. 2.5
Nov 09
SGP10N60A
SGW10N60A
1nF
25V
C iss
15V
C, CAPACITANCE
VGE, GATE-EMITTER VOLTAGE
20V
120V
480V
10V
C oss
C rss
5V
0V
0nC
25nC
50nC
10pF
0V
75nC
QGE, GATE CHARGE
Figure 17. Typical gate charge
(IC = 10A)
20V
30V
IC(sc), SHORT CIRCUIT COLLECTOR CURRENT
200A
20µ s
15µ s
10µ s
5µ s
0µ s
10V
10V
VCE, COLLECTOR-EMITTER VOLTAGE
Figure 18. Typical capacitance as a
function of collector-emitter voltage
(VGE = 0V, f = 1MHz)
25µ s
tsc, SHORT CIRCUIT WITHSTAND TIME
100pF
11V
12V
13V
14V
15V
VGE, GATE-EMITTER VOLTAGE
Figure 19. Short circuit withstand time as a
function of gate-emitter voltage
(VCE = 600V, start at Tj = 25°C)
150A
100A
50A
0A
10V
12V
14V
16V
18V
20V
VGE, GATE-EMITTER VOLTAGE
Figure 20. Typical short circuit collector
current as a function of gate-emitter voltage
(VCE ≤ 600V, Tj = 150°C)
8
Rev. 2.5
Nov 09
SGP10N60A
SGW10N60A
PG-TO220-3-1
9
Rev. 2.5
Nov 09
SGP10N60A
SGW10N60A
10
Rev. 2.5
Nov 09
SGP10N60A
SGW10N60A
τ1
τ2
r1
r2
τn
rn
Tj (t)
p(t)
r1
r2
rn
TC
Figure D. Thermal equivalent
circuit
Figure A. Definition of switching times
Figure B. Definition of switching losses
Figure E. Dynamic test circuit
Leakage inductance Lσ =180nH
and Stray capacity C σ =55pF.
11
Rev. 2.5
Nov 09
SGP10N60A
SGW10N60A
Published by
Infineon Technologies AG
81726 Munich, Germany
© 2008 Infineon Technologies AG
All Rights Reserved.
Legal Disclaimer
The information given in this document shall in no event be regarded as a guarantee of conditions or
characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or
any information regarding the application of the device, Infineon Technologies hereby disclaims any and all
warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual
property rights of any third party.
Information
For further information on technology, delivery terms and conditions and prices, please contact the nearest
Infineon Technologies Office (www.infineon.com).
Warnings
Due to technical requirements, components may contain dangerous substances. For information on the
types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies
components may be used in life-support devices or systems only with the express written approval of
Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of
that life-support device or system or to affect the safety or effectiveness of that device or system. Life support
devices or systems are intended to be implanted in the human body or to support and/or maintain and
sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other
persons may be endangered.
12
Rev. 2.5
Nov 09