Industrial Control Panels for North America Interactive animation on the subject © Siemens AG 2015. All rights reserved. Industrial Control Panels for North America Interactive animation on the subject The animation is based on 2 Control Panels (control cabinets), one built conforming to the IEC standard and the other conforming to the UL standard. The user will be able to navigate through the animation interactively, thus gaining a better understanding of UL specifics in the context of Industrial Control Panels. PROCEDURE: Click one of the devices installed in the Panels (either the IEC or the UL Panel) to display both information about that device and the corresponding device in the other Panel. Click the device again to display both detailed information (technical data, for example) and the UL specifics. Use the buttons to scroll through the animation. The any page in the animation. Click the General information about UL button takes you back to the start page from button for general information about the UL market. PRESS HERE TO START © Siemens AG 2015. All rights reserved. Industry Sector General information about UL Device selection Open the doors © Siemens AG 2015. All rights reserved. Industry Sector General information about UL Device selection Close the doors © Siemens AG 2015. All rights reserved. Industry Sector Device selection Protection devices Switching devices/ load feeders Monitoring devices and control devices Safety systems Other devices and accessories 3VL circuit breaker 3RT contactor 3RR monitoring relay 3TK28 safety relay 8US busbar system 3RV1 circuit breaker 3RW soft starter SIMOCODE 3UF7 3RK3 modular safety system 8US19 infeed system 3RV2 circuit breaker 3RF solid-state contactor Miniature circuit breaker 3RA motor feeder 3RA68 infeed system SITOR fuse 3RA6 compact starter 8US busbar adapter Fuse system class CC ET 200S motor starter Receptacle NEOZED fuse system comfort base 3NP1 fuse switch disconnector 3RV29 infeed system 3SE5 position switch ALPHA FIX terminal blocks Expansion module for SIMOCODE 3UF7 SITOP power supply NEOZED fuse system bus-mounting base 7km PAC measuring instrument DIAZED fuse system bus-mounting base 8UC7 rotary operating mechanism 3RB overload relay © Siemens AG 2015. All rights reserved. Industry Sector General information about UL Line system configurations Organizations and standards Branch Circuit – Feeder Circuit UL marks SCCR (short-circuit current rating) Degrees of protection Control circuits Lines/cables Commissioning/acceptance © Siemens AG 2015. All rights reserved. Industry Sector Line system configurations IEC (a grounded wye system is usually present) TT system, TN system (grounded wye) IT system (ungrounded wye) UL (various line system configurations exist) Some line system configurations not used in the context of IEC Information about all voltages present in the system, e.g. 480Y/277 V (slash rating) or 480 V (straight rating) When selecting short-circuit devices, it is sufficient to differentiate simply between slash and straight rating © Siemens AG 2015. All rights reserved. Industry Sector Line system configurations 480V Grounded wye Slash rating: e.g. 480Y/277V 480V 277V Devices with the following ratings are permitted: 480/277V, 600/347V, 600V, 480V 277V Straight rating: e.g. 480V, 600V Corner grounded delta 480V 480V Devices with the following ratings are permitted: 480V, 600V Devices with the following ratings are not permitted: 480/277V, 600/347V Single-phase/2-pole transformer with central tap Residential e.g.: 240/120V; single-phase Devices with 240V, if the devices are connected between the line conductors 240V 120V Devices with 120V, if the devices are connected between the line conductors and central tap © Siemens AG 2015. All rights reserved. Industry Sector Line system configurations Ungrounded wye 480V Straight rating: e.g. 480V, 600V 480V 480V Devices with the following ratings are permitted: 600V, 480V Devices with the following ratings are not permitted: 600/377V, 480/277V Straight rating: e.g. 480V, 600V Ungrounded delta 480V 480V 480V Devices with the following ratings are permitted: 480V, 600V Devices with the following ratings are not permitted: 480/277V, 600/347V © Siemens AG 2015. All rights reserved. Industry Sector Organizations and standards NFPA - National Fire Protection Association Organization active in the fire protection sector with members from fire departments, authoritative bodies, test laboratories, insurers, and consumer organizations. Issues various regulations and guidelines including NEC, NFPA79, etc. UL - Underwriter Laboratories Underwriter Laboratories publishes standards and approves products in accordance with its own and third-party standards (CSA, IEC, EN, etc.). CSA – Canadian Standard Association The Canadian Standard Association publishes standards and approves products in accordance with its own and third-party standards (UL, IEC, etc). NRTL – National Recognized Testing Laboratories A test center recognized by the US government's OSHA (Occupational Safety and Health Administration) e.g. UL, CSA, TÜV Rheinland of North America and many more. © Siemens AG 2015. All rights reserved. Industry Sector Organizations and standards NEC = NFPA 70 NFPA 79 UL 489 UL 508 IEC 60364-1 IEC 60204-1 IEC 61439-1 UL 508A UL 98 UL 248 UL xxx IEC xxxxx © Siemens AG 2015. All rights reserved. Industry Sector Branch and Feeder Circuit Feeder Circuit Feeder Circuit Starting from the load, all devices and components upstream of the first overcurrent protective device in the branch (Branch Circuit Protective Device) See the next slide for clearances and creepage distances Branch Circuit Starting from the load, all devices and components up to the first overcurrent protective device in the branch (Branch Circuit Protective Device) Branch Circuit Branch Circuit See the next slide for clearances and creepage distances © Siemens AG 2015. All rights reserved. Industry Sector Branch and Feeder Circuit The new edition of UL 508A defines the required clearances and creepage distances for the Feeder and Branch Circuit in detail for the first time Spacings required in infeed and distribution (Feeder Circuit) according to UL 508A Table 10.2 (extract) 0-125 V 126-250 V inch mm inch mm 251-600 V inch mm Through air 1/2 12.7 3/4 19.1 1 25.4 Over surface 3/4 19.1 1-1/4 31.8 2 50.8 Between uninsulated live parts and enclosure 1/2 12.7 1/2 12.7 1 25.4 Spacings in branch circuits according to UL 508A Table 10.1 (extract) 0-50 V 51-150 V mm inch mm inch 151-300 V mm inch 301-600 V mm inch Through air 1/16 1.6 1/8 3.2 1/4 6.4 3/8 9.5 Over surface 1/16 1.6 1/4 6.4 3/8 9.5 1/2 12.7 Between uninsulated live parts and enclosure 1/4 6.4 1/2 12.7 1/2 12.7 1/2 12.7 © Siemens AG 2015. All rights reserved. Industry Sector UL marks UL listing test symbol Any devices or appliances bearing this mark meet all UL safety regulations and can be universally installed without any restriction of their usability and without any additional instructions. C-UL listing test symbol This mark is applied to products tested for compliance with Canadian UL safety requirements. C C-UL listing test symbol C US This symbol identifies devices that comply with both CSA regulations for the Canadian market and UL regulations for the USA. Recognized Component test symbol This symbol is for components or devices used in machines and systems. These components may have restrictions on their performance or may be incomplete in construction. Only specialists working in compliance with the condition of acceptability are permitted to install such components and devices. Canadian Recognized Component test symbol Components bearing this symbol have been approved for the Canadian market and are subject to similar restrictions as components with the Recognized Component test symbol. C Recognized Component test symbol for Canada and the United States C US Components bearing this mark meet the requirements of both the Canadian and US markets for Recognized Components. © Siemens AG 2015. All rights reserved. Industry Sector SCCR Requirement from NEC 2011 Art. 409.110 and UL 508A, Art. 52: Among the requirements to be met is that the SCCR (short-circuit current rating) of the entire Control Panel must be marked on each Industrial Control Panel. The SCCR value shall ensure that the Panel is only connected to systems where the prospective short-circuit current will be less than or equal to the value on the rating plate. Based on NEC 2011 Art. 409.110, there are essentially 3 different ways in which the SCCR value of a Panel can be determined: Option 1: Option 2: Option 3: The SCCR value of each individual Panel or Panel unit is officially listed by a laboratory in the presence of UL test engineers from UL. Using pre-tested versions or buying such pretested Standard Industrial Control Panels. Complete analysis of the Industrial Control Panel in accordance with UL 508A SB4. This method is the one used most often. It is described below. © Siemens AG 2015. All rights reserved. Industry Sector SCCR Determination of the short-circuit current (SCCR) in accordance with NEC 409.110 (4) Step 1 (mandatory): Listing of the SCCR values of the devices (values on the device or in the UL report) The smallest value determines the total short-circuit rating of the Panel! Step 2 (mandatory): Listing of the SCCR values of the devices from UL 508A Table SB 4.1 (if an SCCR value has not been specified) Step 3 (optional): Listing of the SCCR values of switchgear assemblies Series Rating Tests (series connection of at least 2 devices which can respond to a short circuit instantaneously) Combination tests (series connection of devices of any type) © Siemens AG 2015. All rights reserved. Industry Sector Degrees of protection Enclosure types (UL) IP degree of protection (IEC) "Enclosure type" degree of protection is associated with specific protection properties. Some UL enclosure ratings can be transposed to IP degrees of protection, but IP degrees of protection cannot be transposed to UL enclosure ratings. According to UL, an enclosure with only IP ratings is automatically given enclosure rating 1 ? UL/NEMA (typical application) Protection against Comparable IP degree of protection General use Indoors Accidental contact with live parts and ingress of falling dirt IP 20 2 Protection against dripping water Indoors Ingress of dripping water and falling dirt IP 22 3R Rain, hail, ice Outdoors (starters for pump) Ingress of dust and rain blown by the wind, and protection from icing over IP 54 4 Dustproof, waterproof Indoors, outdoors (food industry) Ingress of falling rain, splash water and jet water, no damage should ice form IP 65 4x Dustproof, waterproof, resistant to corrosion Indoors, outdoors (sewage treatment plants) Ingress of falling rain, splash water and jet water, no damage should ice form, anti-corrosion protection Not available 12 Protection against dripping water, dustproof, oil and cooling-water proof Indoors (machine tools) Ingress of dripping water, dust, oil and cooling liquid IP 54 (IP 55) 13 Protection against dripping water, dustproof, oil and cooling-water proof Indoors (command devices on machine tools) Ingress of dripping water, dust, spraying oil and cooling liquid IP54+ Type 1 Installation site x © Siemens AG 2015. All rights reserved. Industry Sector Control circuits Class 1 Control Circuit Class 1 Control Circuit Class 2 Control Circuit © Siemens AG 2015. All rights reserved. Industry Sector Control circuits - Definition Class 1 Control Circuit (UL 508A § 2.6) = general control circuits A control circuit connected to the load side of a BCPD (branch circuit protection device) Maximum voltage: 600 V Maximum current/power: Unrestricted (usually limited to 15 A) Control circuits connected to the outgoing side of a load transformer Control circuits connected at the outgoing side of a control transformer/power supply © Siemens AG 2015. All rights reserved. Industry Sector Control circuits - Definition Class 2 Control Circuit (UL 508A § 2.7) = control circuits with limited power Devices approved "...for use with class 2..." may only be used in these control circuits with limited power Control circuit supplied with power by an energy source (power supply devices certified acc. to UL1310, UL5085-1 & 3, UL60950-1, UL1950) with max. 30 Vrms Devices that are used entirely in a "Class 2 circuit" do not have to be checked via the AHJ components can be used Unlisted Low –Voltage Limited Energy Circuit (UL 508A § 2.32) Control circuit with a "protected" extra-low-voltage Control circuit with max. 30 Vrms or 42 V peak voltage or DC direct voltage with a max. power of 100 VA (5 A at 20 V or less) Devices that are used entirely in a "Limited circuit" do not have to be checked via the AHJ components can be used Unlisted © Siemens AG 2015. All rights reserved. Industry Sector Lines/cables Basic requirements All wires and busbars must be made of copper. (UL 508A Art. 29) EXCEPTION: Busbars in the Panel can also be made of aluminum. Internal wires All internal wires must be approved for at least 90 °C and correspond to one of the following types (UL 508A Art. 29/NFPA 79, Chapter 13): 1. Machine tool wire (MTW) according to UL 1063 2. Rubber insulated wire according to UL 44 3. Thermoplastic insulation according to UL 62 4. Appliance wiring material (acc. to NFPA 79 the line must be suitable for the application 5. Welding cable/diesel-locomotive wire observe the style number) Wiring methods See NFPA 79, Art. 13 and UL 508A, Art. 28, 29, 38 Wire sizes Acc. to UL 508A wires in the main circuit must not be any smaller than 14 AWG (2.1 mm²). Wire size data is listed in the table on the next slide. © Siemens AG 2015. All rights reserved. Industry Sector Lines/cables Wire sizes and current carrying capacity - UL 508A, Table 28.1 (extract) Wire size AWG/kcmil 14 12 10 8 6 4 3 2 1 1/0 2/0 3/0 4/0 250 (kcmil) 300 350 400 500 600 700 750 800 900 60°C (140°F) [mm²] (2.1) (3.3) (5.3) (8.4) (13.3) (21.2) (26.7) (33.6) (42.4) (53.3) (67.4) (85.0) (107.2) (127) (152) (177) (203) (253) (304) (355) (380) (405) (456) Copper [A] 15 20 30 40 55 70 85 95 110 - 75°C (167°F) Aluminum [A] 15 25 30 40 55 65 75 85 - Copper [A] 15 20 30 50 65 85 100 115 130 150 175 200 230 255 285 310 335 380 420 460 475 490 520 Aluminum [A] 15 25 40 50 65 75 90 100 120 135 155 180 205 230 250 270 310 340 375 385 395 425 © Siemens AG 2015. All rights reserved. Industry Sector Commissioning/Acceptance Every electrical machine or system in the USA is checked by an inspector known as the AHJ (Authority Having Jurisdiction) before it can be commissioned. Acceptance is based on the NEC (National Electrical Code, also known as NFPA 70), the relevant application-specific guidelines such as NFPA 79, as well as any local standards or specifications. In the USA, acceptance is a legal requirement. The next graphic (see next slide) outlines four possible ways of arranging acceptance. © Siemens AG 2015. All rights reserved. Industry Sector Commissioning/Acceptance Acceptance options for OEMs Panel listed with label by NRTL Certified control manufacturer Preliminary acceptance by UL inspector at his/her premises On-site field inspection by AHJ in USA On-site acceptance by AHJ Costs involved Time involved in on-site acceptance Modification possible Not possible Possible, together with manufacturer Possible, field inspection required Possible, repeat field inspection Recommendation Very high quantities Many different systems Little UL knowledge Good UL knowledge Operating permission from AHJ End-customer precondition for commissioning © Siemens AG 2015. All rights reserved. Industry Sector Miniature circuit breaker Miniature circuit breaker © Siemens AG 2015. All rights reserved. Industry Sector Miniature circuit breaker Technical data Approvals Device selection To IEC standard: 5SY4 miniature circuit breaker To UL standard: 5SJ4 miniature circuit breaker © Siemens AG 2015. All rights reserved. Industry Sector Miniature circuit breaker Technical data 5SY4 miniature circuit breaker 5SJ4 miniature circuit breaker Rated current from 0.3 to 63 A Circuit breaker according to UL 489 Rated switching capacity 10 kA to 15 kA according to EN 60898-1 Rated current from 0.3 to 63 A Rated switching capacity 25 kA according to EN 60947-2 Rated switching capacity up to 15 kA according to IEC 60947-2 Rated voltage up to 440 V DC/up to 400 V AC Rated voltage 480Y/277 V AC Rated switching capacity up to 14 kA acc. to UL 489 Rated voltage DC: up to 125 V (UL 489) up to 60 V (IEC 60898 -1) © Siemens AG 2015. All rights reserved. Industry Sector Miniature circuit breaker Approvals 5SY4 miniature circuit breaker 5SJ4 miniature circuit breaker Approval to IEC 60898-1 and IEC 60947-2 Approval to IEC 60898-1 and IEC 60947-2 Approval to CSA C22.2 No. 235 Approval to CSA C22.2 No. 5-02 Approval to UL 1077 for use as supplementary protector Approval to UL 489 as circuit breaker Use as branch circuit protection Can be used for the protection of control circuits if: On the primary side: Control circuit is branched downstream of the BCPD See UL report (UL File No. E243414) for further information On the secondary side: Control circuit remains in Panel © Siemens AG 2015. All rights reserved. Industry Sector 3VL circuit breaker Main switch (3VL circuit breaker) © Siemens AG 2015. All rights reserved. Industry Sector 3VL circuit breaker Technical data Approvals Device selection To IEC standard: 3VL circuit breaker To UL standard: 3VL circuit breaker © Siemens AG 2015. All rights reserved. Industry Sector 3VL circuit breaker Technical data 3VL circuit breaker 3VL circuit breaker Rated current from 16 A to 1,600 A Rated current from 16 A to 1,600 A Rated voltage up to max. 690 V AC/max. 600 V DC Rated voltage up to max. 600 V AC/max. 500 V DC Rated switching capacity at 400 V 100 kA Rated switching capacity at 400 V 100 kA 3- and 4-pole device versions 3-pole device version The set value IR for the overcurrent release in percent The set value IR for the overcurrent release in ampere © Siemens AG 2015. All rights reserved. Industry Sector 3VL circuit breaker Approvals 3VL circuit breaker Approval to IEC 60947--2 3VL circuit breaker Approval to IEC 60947--2 Main and emergency off switch Approval to UL 489 as circuit breaker System and generator protection Approval to CSA C22.2 No. 5-02 Starter combinations Main and emergency off switch Non-automatic circuit breakers System and generator protection Motor protection Starter combinations Non-automatic circuit breakers See UL report (UL File No. E10848) for further information © Siemens AG 2015. All rights reserved. Industry Sector 3RV2 circuit breaker 3RV2 circuit breaker as system protection © Siemens AG 2015. All rights reserved. Industry Sector 3RV2 circuit breaker Technical data Approvals Device selection To IEC standard: 3RV2 circuit breaker as system protection To UL standard: 3RV27/28 circuit breaker as system protection © Siemens AG 2015. All rights reserved. Industry Sector 3RV2 circuit breaker Technical data 3RV20 circuit breaker Rated current up to 40 A (depending on the size) Rated voltage up to max. 690 V AC (IEC)/600 V AC (UL, CSA) Short-circuit strength up to 100 kA (depending on the voltage) Screw terminal connections (up to 40 A), springloaded connection system and ring cable lug connection (up to 32 A) Use of practical conductor cross-sections possible: size S00 max. 4 mm2/ size S0 max. 10 mm2 3RV27/28 circuit breaker Rated current up to 22 A Rated voltage IEC: max. 690 V AC Rated voltage UL: max. 600Y/477 V (slash rating only) Short-circuit strength up to 65 kA (at 480 Y/277 V to UL) Screw terminal connections Size S00 and S0 For further information, go to www.siemens.de/sirius © Siemens AG 2015. All rights reserved. Industry Sector 3RV2 circuit breaker Approvals 3RV20 circuit breaker Approval to IEC 60947-1, IEC 60947-2 and IEC 60947-4-1 as: 3RV27/28 circuit breaker Approval to IEC 60947-1 and IEC 60947-2 Short-circuit and motor protection Approval to CSA C22.2 No.5-02 System and transformer protection Approval to UL 489 as circuit breaker Main and emergency off protection Also approved to UL 508 as motor circuit breaker: System and transformer protection „Manual Motor Controller“ "Self Protected Combination Motor Controller" when using 3RV29 28-1H terminal block or 3RV29 28-1K phase barriers See UL report (UL File No. E47705) for further information © Siemens AG 2015. All rights reserved. Industry Sector 3RV1 circuit breaker 3RV1 circuit breaker © Siemens AG 2015. All rights reserved. Industry Sector 3RV1 circuit breaker Technical data Approvals Device selection To IEC standard: 3RV10 circuit breaker To UL standard: 3RV17 circuit breaker © Siemens AG 2015. All rights reserved. Industry Sector 3RV1 circuit breaker Technical data 3RV10 circuit breaker Rated current up to 100A (depending on the size) Rated voltage up to max. 690 V AC (IEC)/600 V AC (UL, CSA) Short-circuit strength up to 100 kA (depending on the voltage) Screw terminal connections Use of practical conductor cross-sections possible: size S2 max. 35 mm2/ size S3 max. 70 mm2 3RV17 circuit breaker Rated current up to 100 A Rated voltage max. 690 V AC (IEC)/600 V AC (UL, CSA) Short-circuit strength up to 65 kA at 480 Y/277 V and 480 V Screw terminal connections Use of practical conductor cross-sections possible: size S2 max. AWG 2/0 For further information, go to www.siemens.de/sirius © Siemens AG 2015. All rights reserved. Industry Sector 3RV1 circuit breaker Approvals 3RV10 circuit breaker Approval to IEC 60947-1, IEC 60947-2 and IEC 60947-4-1 Short-circuit and motor protection (also with overload function) System and transformer protection Main and emergency off protection 3RV17 circuit breaker Approval to IEC 60947-1 and IEC 60947-2 Approval to CSA C22.2 No. 5-02 Approval to UL 489 as circuit breaker System and transformer protection Approval to CSA C22.2 No. 14 and UL 508 as: „Manual Motor Controller“ See UL report (UL File No. E47705) for further information "Self-Protected Combination Motor Controller" when using terminal block 3RT 1946-4GA07 © Siemens AG 2015. All rights reserved. Industry Sector 5TE6 socket 5TE6 socket © Siemens AG 2015. All rights reserved. Industry Sector 5TE6 socket Technical data Approvals Device selection To IEC standard: 5TE6 800 socket To UL standard: 5TE6 804 socket © Siemens AG 2015. All rights reserved. Industry Sector 5TE6 socket Technical data 5TE6 800 socket 5TE6 804 socket Rated operational voltage 230 V AC Rated operational voltage 125 V AC Rated operational current 16 A Rated operational current 15A Conductor cross-sections up to 6 mm² Conductor cross-sections up to AWG 10 Ambient temperature from -10 °C to +55 °C Ambient temperature from -10 °C to +55 °C Degree of protection IP 20 For further information, go to www.siemens.de/sirius © Siemens AG 2015. All rights reserved. Industry Sector 5TE6 socket Approvals 5TE6 800 socket 5TE6 804 socket Approval to IEC 60204-1 Approval to UL 498 Suitable for mounting in distribution boards acc. to DIN 43880 Approval to CSA C22.2 No.182.3M Suitable for installation on DIN rails in switchboards and distribution boards acc. to DIN 60715 Connection of plug-and-play communication devices in switchboards Connection of plug-and-play communication devices in switchboards See UL report (UL File No. E258598) for further information © Siemens AG 2015. All rights reserved. Industry Sector Busbar system Busbar system © Siemens AG 2015. All rights reserved. Industry Sector Busbar system Technical data Approvals Device selection To IEC standard: 8US busbar system (40 mm) To UL standard: 8US busbar system (60 mm) © Siemens AG 2015. All rights reserved. Industry Sector Busbar system Technical data 8US busbar system (40 mm busbar center-to-center spacing) 8US busbar system (60 mm busbar center-to-center spacing) Rated insulation voltage Ui 1,000 V AC Rated insulation voltage Ui 1,000 V AC Rated current up to 400 A (40 mm) Rated current up to 630 A (60 mm, basic profile) Short-circuit strength to IEC see characteristics Rated current up to 1,600 A (60 mm, special profile) For further information, go to www.siemens.de/lowvoltage Short-circuit strength to IEC see characteristics For further information, go to www.siemens.de/lowvoltage SC characteristics (IEC) © Siemens AG 2015. All rights reserved. Industry Sector Busbar system Approvals 8US busbar system (40 mm busbar center-to-center spacing) Approval to EN 13601 Approval to IEC 60439-1 and IEC 61439-2 Approval to UL 508 only for use in the branch circuit 8US busbar system (60 mm busbar center-to-center spacing) Approval to IEC 60439-1 and IEC 61439-2 Approval to CSA C22.2 No.14/ No.39 Approval to UL 508: Use in feeder and branch circuit See UL report (UL File No. E148698) for further information © Siemens AG 2015. All rights reserved. Industry Sector Busbar system Characteristics for rated peak withstand current 40 mm busbar system 60 mm busbar system The characteristics are only applicable for IEC applications! They must not be used for UL applications!! © Siemens AG 2015. All rights reserved. Industry Sector 3RT2 contactor 3RT2 contactor © Siemens AG 2015. All rights reserved. Industry Sector 3RT2 contactor Technical data Approvals Device selection 3RT2 contactor © Siemens AG 2015. All rights reserved. Industry Sector 3RT2 contactor Technical data 3RT2 contactor Sizes S00 and S0 Screw terminal, spring-loaded, ring cable lug, and solder pin (S00) connections IEC – ratings Rated operational current up to max. 50 A (depending on the size and operating temperature) Rated operational voltage up to max. 690 V AC Rated frequency 50/60 Hz CSA and UL – ratings Rated operational current up to max. 42 A (depending on the size and operating temperature) Rated operational voltage up to max. 600 V AC Rated frequency 60 Hz Horsepower rating up to max. 25 hp (depending on the size and operating voltage) For further information, go to www.siemens.de/sirius © Siemens AG 2015. All rights reserved. Industry Sector 3RT2 contactor Approvals 3RT2 contactor Approval to IEC 60947-1 and DIN EN 60947-1 Approval to IEC 60947-4-1 and DIN EN 60947-4-1 Approval to IEC 60947-5-1 and DIN EN 60947-5-1 (auxiliary switch) Approval to CSA C22.2 No. 14 Approval to UL 508 See UL report (UL File No. E31519) for further information © Siemens AG 2015. All rights reserved. Industry Sector 3RA2 load feeder with 3RV29 infeed system 3RA2 load feeder (3RV2 motor starter protector + 3RT2 contactor) with 3RV29 infeed system © Siemens AG 2015. All rights reserved. Industry Sector 3RA2 load feeder with 3RV29 infeed system 3RA2 load feeder with 3RV29 infeed system © Siemens AG 2015. All rights reserved. Industry Sector 3RA2 load feeder Technical data Approvals Device selection 3RA2 load feeder © Siemens AG 2015. All rights reserved. Industry Sector 3RV29 infeed system Technical data Approvals Device selection 3RV29 infeed system © Siemens AG 2015. All rights reserved. Industry Sector 3RA2 load feeder Technical data 3RA2 load feeder Fuseless load feeder consisting of 3RV2 circuit breaker and 3RT2 contactor Rated current up to max. 32 A (depending on the size) For rated currents > 32 A up to 100 A, 3RA1 load feeders can be used Available as a pre-assembled complete unit or for customer assembly (up to 40 A) Rated voltage up to max. 690 V AC Short-circuit strength up to 150 kA at 400 V AC 50/60 Hz Screw terminal and spring loaded connections (customer assembly) Sizes S00 and S0 For further information, go to www.siemens.de/sirius © Siemens AG 2015. All rights reserved. Industry Sector 3RA2 load feeder Approvals 3RA2 load feeder Approval to IEC 60947-1, IEC 60947-2, and IEC 60947-4-1 Exhibits isolating features conforming to IEC 60947-2 and can be used as a main switch according to DIN EN 60204 Approval to CSA C22.2 No. 14 Approval to UL 508 as: Combination Motor Controller Type F See UL report (UL File No. E156943) for further information © Siemens AG 2015. All rights reserved. Industry Sector 3RV29 infeed system Technical data 3RV29 infeed system High flexibility for installation and expansion Compact design saves space Infeed either on the left or right with conductor cross-section up to 25 mm2 Spring-loaded and screw terminal connections Sizes S00 and S0 Current carrying capacity up to max. 63 A For further information, go to www.siemens.de/sirius © Siemens AG 2015. All rights reserved. Industry Sector 3RV29 infeed system Approvals 3RV29 infeed system Approval to IEC 60947-1, IEC 60947-2, IEC 60947-4-1 Approval to UL 508 for the installation of: Self Protected Combination Motor Controller Type E Self Protected Combination Motor Controller Type F (corresponds to type E + contactor) See UL report (UL File No. E148698) for further information © Siemens AG 2015. All rights reserved. Industry Sector ALPHA Fix terminal blocks ALPHA Fix terminal blocks © Siemens AG 2015. All rights reserved. Industry Sector ALPHA FIX terminal blocks Technical data Approvals Device selection ALPHA FIX terminal blocks © Siemens AG 2015. All rights reserved. Industry Sector ALPHA Fix terminal blocks Technical data ALPHA Fix terminal blocks Space-saving connection of incoming and outgoing lines in switchboards and Control Panels Connection method: Screw terminal and spring-loaded connections, in-push-out terminal, combination plug-in terminal, and insulation displacement termination Quick installation saving time with high contact reliability Rated uninterrupted current up to 192 A Rated insulation voltage up to 800 V Ratings may vary (IEC/UL)!! For further information, go to www.siemens.de/lowvoltage/support © Siemens AG 2015. All rights reserved. Industry Sector ALPHA FIX Terminal Blocks Technical Data 8WA1 screw-type terminal The tried-and-tested screw-type connection system features double insulation and is closed on both sides. These terminals are particularly stable and offer a high mechanical and thermal resistance. Available as through-type, PE and PEN terminals in various terminal sizes 2.5 mm², 4 mm², 6 mm², 16 mm², 35 mm², 70 mm² 8WH1 screw-type terminal The screw-type connection system offers a convincing compact design and optimum ease of handling. The clamping body's plasticity prevents clamped wires from slipping. Support of applications up to 1,000 V DC Available as through-type and PE terminals in various terminal sizes 2.5 mm², 4 mm², 6 mm², 10 mm², 16 mm², 35 mm² For further information, see www.siemens.com/lowvoltage © Siemens AG 2015. All rights reserved. Industry Sector ALPHA FIX Terminal Blocks Technical Data 8WA2 spring-loaded terminal With the spring-loaded connection system, constant pressure is applied to the conductor by the tension spring, which results in outstanding contact reliability – also with vibration-sensitive applications. Available as through-type and PE terminals in various terminal sizes (2.5 mm², 4 mm², 6 mm², 16 mm², 35 mm²) Accessories for 8WA and 8WH Various accessories for terminal blocks, 8WH labeling accessories and mounting accessories, labeling plates with inscription, 8WA mounting accessories For further information, see www.siemens.com/lowvoltage © Siemens AG 2015. All rights reserved. Industry Sector ALPHA Fix terminal blocks Approvals ALPHA Fix terminal blocks Approval to IEC 60947-7-1 Approval to UL 1059 (UL recognized) Conditions of acceptability must be observed when using the components Approval to CSA 6228-01 See UL report (UL File No. E80027) for further information © Siemens AG 2015. All rights reserved. Industry Sector 3RA6 compact starter with 3RA68 infeed system 3RA6 compact starter with 3RA68 infeed system © Siemens AG 2015. All rights reserved. Industry Sector 3RA6 compact starter with 3RA68 infeed system 3RA6 compact starter with 3RA68 infeed system © Siemens AG 2015. All rights reserved. Industry Sector 3RA6 compact starter Technical data Approvals Device selection 3RA6 compact starter © Siemens AG 2015. All rights reserved. Industry Sector 3RA6 compact starter Technical data 3RA6 compact starter Universal fuseless motor feeder Combines the functions of a circuit breaker, a contactor, and an overload relay in a single enclosure Rated voltage up to 690 V Rated current up to 32 A For load feeders > 32 A up to 100 A 3RA1 series For load feeders > 100 A, 3VL circuit breakers and 3RT contactors can be used Rated frequency 50/60 Hz Rated short-circuit breaking capacity at AC 50/60 Hz 400 V up to 53 kA Connection method: Screw terminal connection, spring-loaded connection For further information, go to www.siemens.de/sirius © Siemens AG 2015. All rights reserved. Industry Sector 3RA6 compact starter Approvals 3RA6 compact starter Approval to IEC 60947-6-2 and IEC 60947-2 Exhibits isolating features conforming to IEC 60947-2 and can be used as a main switch according to DIN EN 60204 Approval to UL 508 (when using the corresponding infeed system e.g. 3RA68 12 - 8AB/8AC) as: Manual Motor Controller Self Protected Combination Motor Controller Type E Group Application Suitable for Tap Conductor Protection See UL report (UL File No. E47705) for further information © Siemens AG 2015. All rights reserved. Industry Sector 3RA68 infeed system for 3RA6 compact starter Technical data Approvals Device selection 3RA6 compact starter with 3RA68 infeed system © Siemens AG 2015. All rights reserved. Industry Sector 3RA68 infeed system for 3RA6 compact starter Technical data 3RA68 infeed system for 3RA6 compact starter High flexibility for installation and expansion Compact design saves space Devices are mounted simply by clicking them into place No need for complex wiring Spring-loaded and screw terminal connections Current carrying capacity up to max. 100 A Component Maximum rated operational current in A Screw-type infeed 50/70 mm2 100 Screw-type infeed 25/35 mm2 63 Spring-loaded infeed 25/35 mm2 63 Expansion plug 63 For further information, go to www.siemens.de/sirius © Siemens AG 2015. All rights reserved. Industry Sector 3RA68 Infeed System for 3RA6 Compact Starter Approvals 3RA68 infeed system for 3RA6 compact starter Approval according to UL 508 for the installation of: Self-protected combination motor controller type E Manual motor controller Group application Suitable for tap conductor protection Approval according to CAN/CSA-C22.2 No. 0.4-04 Bonding of electrical equipment Approval according to CSA-C22.2 No. 14-10 Industrial control equipment See UL report (UL File No. E148698) for further information © Siemens AG 2015. All rights reserved. Industry Sector 3RA2 load feeder on busbar with infeed 3RA2 load feeder (3RV2 motor starter protector + 3RT2 contactor) on busbar with infeed © Siemens AG 2015. All rights reserved. Industry Sector 3RA2 load feeder on busbar with infeed 3RA2 load feeder on 8US busbar with 8US19 infeed © Siemens AG 2015. All rights reserved. Industry Sector 8US19 infeed Device selection 8US19 infeed © Siemens AG 2015. All rights reserved. Industry Sector 3RA2 load feeder with 8US busbar adapter 3RA2 load feeder with 8US busbar adapter © Siemens AG 2015. All rights reserved. Industry Sector 3RA2 load feeder 3RA2 load feeder 3RV2 circuit breaker + 3RT2 contactor © Siemens AG 2015. All rights reserved. Industry Sector 3RV20 circuit breaker Technical data Approvals Device selection 3RV20 circuit breaker as motor circuit breaker © Siemens AG 2015. All rights reserved. Industry Sector 3RV20 Circuit Breaker as Motor Circuit Breaker Technical Data 3RV20 circuit breaker as motor circuit breaker Rated current up to 40 A (depending on the size) Up to 32 A: Assembly as feeder with connecting module and contactor or available as 3RA2 feeder Rated operational voltage up to max. 690 V AC (IEC) Rated operational voltage up to max. 600 V AC (UL, CSA) Short-circuit strength up to 100 kA (depending on the voltage) Screw-type connection system (up to 40 A), spring-loaded connection system and ring cable lug connection system (up to 32 A) For UL applications: 3RV29 28-1H terminal block Support of practical conductor cross-sections : Size S00 max. 4 mm2 / size S0 max. 10 mm2 For further information, see www.siemens.com/sirius © Siemens AG 2015. All rights reserved. Industry Sector 3RV20 circuit breaker as motor circuit breaker Approvals 3RV20 circuit breaker as motor circuit breaker Approval to IEC 60947-1, IEC 60947-2 and IEC 60947-4-1 as: Short-circuit and motor protection System and transformer protection Main and emergency off protection Approval to CSA C22.2 No. 14 Approval to UL 508 For UL applications: 3RV29 28-1H terminal block „Manual Motor Controller“ "Self Protected Combination Motor Controller" when using 3RV29 28-1H terminal block or 3RV29 28-1K phase barriers See UL report (UL File No. E47705) for further information © Siemens AG 2015. All rights reserved. Industry Sector 8US busbar adapter Device selection 8US busbar adapter © Siemens AG 2015. All rights reserved. Industry Sector 3RW44 soft starter 3RW44 soft starter © Siemens AG 2015. All rights reserved. Industry Sector 3RW44 soft starter Technical data Approvals Device selection 3RW44 soft starter © Siemens AG 2015. All rights reserved. Industry Sector 3RW44 soft starter Technical data 3RW44 soft starter The soft starter for High Feature applications Rated operational current up to 1,214 A (depending on the size and temperature) Rated operational voltage up to 690 V AC Rated frequency 50 to 60 Hz Screw terminal and spring-loaded connections Inside-delta circuit to reduce size and device costs (smaller size for higher power possible) Easy to install and integrate in motor feeders Numerous additional functions For further information, go to www.siemens.de/sirius © Siemens AG 2015. All rights reserved. Industry Sector 3RW44 soft starter Approvals 3RW44 soft starter Approval to IEC 60947- 4 - 2 Approval to UL 508 Approval to CSA C22.2 No. 14 See UL report (UL File No. E143112) for further information © Siemens AG 2015. All rights reserved. Industry Sector SITOR semiconductor fuse SITOR semiconductor fuse © Siemens AG 2015. All rights reserved. Industry Sector SITOR semiconductor fuse Technical data Approvals Device selection SITOR semiconductor fuse © Siemens AG 2015. All rights reserved. Industry Sector SITOR semiconductor fuse Technical data SITOR semiconductor fuse Fuses to protect power semiconductors against the effects of a short circuit High-speed switch-off characteristic Available with various types of connection and in different designs: LV HRC, cylindrical fuse, and SILIZED Cylindrical fuse design Rated current up to 100 A (depending on the size) Rated voltage up to max. 690 V AC Rated conditional short-circuit current at 400 V up to 100 kA (depending on the size) Conductor cross-section up to 50 mm²/ AWG 1/0 (depending on the size) For further information, go to www.siemens.de/sirius © Siemens AG 2015. All rights reserved. Industry Sector SITOR semiconductor fuse Approvals SITOR semiconductor fuse Cylindrical fuse design Cylindrical fuse links: Approval to IEC 60269-4 Approval to UL 248-13 and CSA C22.2 No. 248.13 Cylindrical fuse holders: Approval to IEC 60269-2 and IEC 60947-3 Approval to UL 512 and CSA C22.2 No. 39-M Cylindrical fuse bases: Approval to IEC 60269-2 and IEC 60947-3 Approval to UL 512 and CSA C22.2 No. 39-M See UL report (UL File No. E167357) for further information © Siemens AG 2015. All rights reserved. Industry Sector Class CC fuse system Class CC fuse system © Siemens AG 2015. All rights reserved. Industry Sector Class CC fuse system Technical data Approvals Device selection Class CC fuse system © Siemens AG 2015. All rights reserved. Industry Sector Class CC fuse system Technical data Class CC fuse system Class CC fuse system for use as branch circuit protection Rated operational current up to 30 A In uninterrupted duty, only 80% of the rated current is permitted (acc. to NEC 210.20(A)) Rated operational voltage 600 V AC (fuse holder and fuse links) Conductor cross-sections up to 25 mm²/AWG 4 Rated breaking capacity 200 kA (fuse links) For further information, go to www.siemens.de/lowvoltage © Siemens AG 2015. All rights reserved. Industry Sector Class CC fuse system Approvals Class CC fuse system Approval to UL 512 (fuse holders) Approval to UL 248-4 (fuse links) Approval to CSA C22.2 No. 14 No IEC approval!! See UL report (UL File No. E258218) for further information © Siemens AG 2015. All rights reserved. Industry Sector Distributed IO ET 200S motor starter Distributed IO ET 200S motor starter © Siemens AG 2015. All rights reserved. Industry Sector Distributed IO ET 200S motor starter Technical data Approvals Device selection Distributed IO ET 200S motor starter © Siemens AG 2015. All rights reserved. Industry Sector Distributed IO ET 200S motor starter Technical data Distributed IO ET 200S motor starter Multifunctional motor starter for distributed drive solutions Functional scope depends on the motor version: Standard motor starter High Feature motor starter Fail-safe motor starter Interface modules (IM) are used to connect to PROFINET and PROFIBUS DP bus systems Rated operational current for terminal modules TM-D up to 50 A Rated operational current for motor starter up to 16 A Rated operational voltage up to 500 V (IEC) Rated operational voltage up to 600 V (UL/CSA) Rated breaking capacity at 400 V up to 50 kA Power of three-phase motors at 500 V up to 7.5 kW Conductor cross-sections up to 10 mm²/AWG 10 For further information, go to www.siemens.de/ET200S © Siemens AG 2015. All rights reserved. Industry Sector Distributed IO ET 200S motor starter Approvals Distributed IO ET 200S motor starter Approval to IEC 60947-4-2 and IEC 60947-4-1 SIL 3 to IEC 62061 (ET 200S fail-safe version) Approval to UL 508 Approval to CSA C22.2 No. 14 See UL report (UL File No. E31519) for further information © Siemens AG 2015. All rights reserved. Industry Sector NEOZED fuse system (comfort base) NEOZED fuse system (comfort base) © Siemens AG 2015. All rights reserved. Industry Sector NEOZED fuse system (comfort base) Technical data Approvals Device selection NEOZED fuse system (comfort base) © Siemens AG 2015. All rights reserved. Industry Sector NEOZED fuse system (comfort base) Technical data NEOZED fuse system (comfort base) Fuse system for use in distribution systems and in industrial switchboards Compact design saving space in the Panel Rated operational current up to 100 A (fuse links) Rated operational current up to 63 A (comfort base) Rated operational voltage 400 V AC/250 V DC Rated breaking capacity 50 kA AC/8 kA DC Operating class gG Conductor cross-sections up to 35 mm² 1- and 3-pole device versions For further information, go to www.siemens.de/lowvoltage © Siemens AG 2015. All rights reserved. Industry Sector NEOZED fuse system (comfort base) Approvals NEOZED fuse system (comfort base) Fuse links: Approval to IEC 60269-3 Approval to DIN VDE 0636-3 Comfort base: Approval to IEC 60269-3 Approval to DIN VDE 0636-3 No UL/CSA approval! © Siemens AG 2015. All rights reserved. Industry Sector 3TK28 safety relay 3TK28 safety relay © Siemens AG 2015. All rights reserved. Industry Sector 3TK28 safety relay Technical data Approvals Device selection 3TK28 safety relay © Siemens AG 2015. All rights reserved. Industry Sector 3TK28 safety relay Technical data 3TK28 safety relay Safety relay with solid-state, relay or contactor relay enabling circuit plus special functions Evaluation unit of an end-to-end safety chain (sensing, evaluating, switching off) Can be used in all safety applications thanks to compliance with the most exacting safety requirements Compact and space-saving SIRIUS design Highly flexible where connection and expansion are concerned, making subsequent modification easy Screw terminal and spring-loaded connections For further information, go to www.siemens.de/sicherheitsschaltgeraete © Siemens AG 2015. All rights reserved. Industry Sector 3TK28 safety relay Approvals 3TK28 safety relay Meets the most exacting safety requirements Approval to EN ISO 13849-1 Performance Level (PL) e Approval to IEC 61508 Safety Integrity Level (SIL) 3 Approval to UL/CSA See UL report (UL File No. E44653) for further information © Siemens AG 2015. All rights reserved. Industry Sector 3RK3 modular safety system Modular safety system 3RK3 © Siemens AG 2015. All rights reserved. Industry Sector 3RK3 modular safety system Technical data Approvals Device selection 3RK3 modular safety system © Siemens AG 2015. All rights reserved. Industry Sector 3RK3 Modular Safety System Technical Data 3RK3 modular safety system The MSS 3RK3 is a freely parameterizable modular safety relay comprising: Central unit (in Basic or Advanced design) Expansion module (I/O module) Interface module (PROFIBUS DP interface) Operating and monitoring module (diagnostics module) High flexibility and reliability in terms of planning thanks to modular design Compact and space-saving SIRIUS design Screw-type and spring-loaded connection system Direct-data exchange between multiple MSS units Distribution of sensors and actuators possible via AS-Interface For further information, see www.siemens.com/sirius-mms © Siemens AG 2015. All rights reserved. Industry Sector 3TK28 safety relay Approvals 3RK3 modular safety system Meets the most exacting safety requirements Approval to ISO 13849-1 Performance Level (PL) e Approval to IEC 61508 Safety Integrity Level (SIL) 3 Approval to UL/CSA See UL report (UL File No. .?????) for further information © Siemens AG 2015. All rights reserved. Industry Sector SIMOCODE motor management system with current/voltage measuring module SIMOCODE motor management system with current/voltage measuring module © Siemens AG 2015. All rights reserved. Industry Sector SIMOCODE 3UF7 motor management system Technical data Approvals Device selection SIMOCODE 3UF7 motor management system © Siemens AG 2015. All rights reserved. Industry Sector SIMOCODE 3UF7 Motor Management System Technical Data SIMOCODE 3UF7 motor management system Modular motor management system for fixed-speed motors Multifunctional and electronic full motor protection, independent of the automation system Integrated control functions for motor control (instead of hardware) Detailed diagnostic, service and operating data Comprehensive communication via PROFIBUS or PROFINET / OPC UA / web server For further information, see www.siemens.com/simocode © Siemens AG 2015. All rights reserved. Industry Sector SIMOCODE 3UF7 motor management system Approvals SIMOCODE 3UF7 motor management system Meets the most exacting safety requirements Performance Level (PL) e to ISO Safety Integrity Level (SIL) 3 to IEC Approval to EN 13849-1 Approval to IEC 61508 Approval to CSA C22.2 No. 14 Approval to UL 508 See UL report (UL File No. E44653) for further information © Siemens AG 2015. All rights reserved. Industry Sector SIMOCODE motor management system with current/voltage measuring module Device selection Current/voltage measuring module for SIMOCODE motor management system © Siemens AG 2015. All rights reserved. Industry Sector 3NP1 LV HRC fuse switch disconnector 3NP1 LV HRC fuse switch disconnector © Siemens AG 2015. All rights reserved. Industry Sector 3NP1 LV HRC fuse switch disconnector Technical data Approvals Device selection 3NP1 LV HRC fuse switch disconnector © Siemens AG 2015. All rights reserved. Industry Sector 3NP1 LV HRC fuse switch disconnector Technical data 3NP1 LV HRC fuse switch disconnector Fuse switch disconnector for the protection and switching of many different types of load including: Combination motor controllers In conjunction with SITOR fuses for the protection of frequency converters and soft starters Protection of communication modules Group protection of small loads Rated operational current up to 630 A Rated operational voltage up to 690 V AC Rated frequency 50/60 Hz Short-circuit strength at 690 V up to 120 kA For further information, go to www.siemens.de/lowvoltage © Siemens AG 2015. All rights reserved. Industry Sector 3NP1 LV HRC fuse switch disconnector 3NP1 Approvals 3NP1 LV HRC fuse switch disconnector Approval to IEC 60947-1 and IEC 60947-1 Approval to EN 60947-1 and EN 60947-3 Approval to CSA C22.2 No. 39-M Approval to UL 512 See UL report (UL File No. .?????) for further information © Siemens AG 2015. All rights reserved. Industry Sector 3RF solid-state switching device 3RF solid-state switching device © Siemens AG 2015. All rights reserved. Industry Sector 3RF solid-state switching device Technical data Approvals Device selection 3RF solid-state switching device © Siemens AG 2015. All rights reserved. Industry Sector 3RF solid-state switching device Technical data 3RF solid-state switching device Solid-state switching device used for the frequent switching of motors, small drives, and valves Long service life: More than 100 million operating cycles Wear-free and noiseless switching for high system availability Rated operational current up to 16 A Rated operational voltage 48 to 600 V AC Rated control voltage 24 V DC/110 V AC up to 230 AC Rated frequency 50/60 Hz ± 10% Screw terminal and spring-loaded connections Conductor cross-sections up to 10 mm²/AWG 10 For further information, go to www.siemens.de/halbleiterschaltgeraete © Siemens AG 2015. All rights reserved. Industry Sector 3RF solid-state switching device Approvals 3RF solid-state switching device Approval to IEC 60947-4-2 Approval to CSA C22.2 No. 14 Approval to UL 508 See UL report (UL File No. E143112) for further information © Siemens AG 2015. All rights reserved. Industry Sector 3RB3 overload relay 3RB3 overload relay © Siemens AG 2015. All rights reserved. Industry Sector 3RB3 overload relay Technical data Approvals Device selection 3RB3 overload relay © Siemens AG 2015. All rights reserved. Industry Sector 3RB3 overload relay Technical data 3RB3 overload relay Solid-state overload relay for inverse-time delayed overload protection of three-phase motors Not suitable for protecting single-phase AC or DC loads Rated operational current from 0.4 to 40 A Rated operational voltage up to 690 V AC Available in sizes S00 and S0 Optional direct mounting on contactor or stand-alone assembly Large wide setting range of 1:4 Spring-loaded and screw terminal connections Conductor cross-sections up to 10 mm²/AWG 6 For further information, go to www.siemens.de/lowvoltage © Siemens AG 2015. All rights reserved. Industry Sector 3RB3 overload relay Approvals 3RB3 overload relay Approval to IEC 60947-4-1, IEC 60947-5-1 Approval to CSA C22.2 No. 14 Approval to UL 508 See UL report (UL File No. E44653) for further information © Siemens AG 2015. All rights reserved. Industry Sector 3RR2 monitoring relay 3RR2 monitoring relay © Siemens AG 2015. All rights reserved. Industry Sector 3RR2 monitoring relay Technical data Approvals Device selection 3RR2 monitoring relay © Siemens AG 2015. All rights reserved. Industry Sector 3RR2 Monitoring Relay Technical Data 3RR2 monitoring relay Monitoring relay for optimum protection of machines and systems One device for overload and underload monitoring Direct mounting on RT2 contactor Display for indication of values Rated operational current from 1.6 to 40 A Rated operational voltage up to 690 V AC Rated control supply voltage from 24 to 240 V AC/DC Screw-type and spring-loaded connection system Short-circuit strength up to 100 kA with 690 V (in combination with suitable protective device) For further information, see link © Siemens AG 2015. All rights reserved. Industry Sector 3RR2 monitoring relay Approvals 3RR2 monitoring relay Approval to IEC 60947-4-1 Approval to CSA C22.2 No.14 Approval to UL 508 See UL report (UL File No. E44653) for further information © Siemens AG 2015. All rights reserved. Industry Sector NEOZED bus-mounting base NEOZED bus-mounting base © Siemens AG 2015. All rights reserved. Industry Sector NEOZED bus-mounting base Technical data Approvals Device selection NEOZED bus-mounting base © Siemens AG 2015. All rights reserved. Industry Sector NEOZED bus-mounting base Technical data NEOZED bus-mounting base NEOZED bus-mounting base for 3-pole 60 mm busbar systems Available in sizes D01 and D02 Rated operational current up to 63 A Rated operational voltage 400 V AC/250 V DC Rated operating frequency 50 Hz Conditional short-circuit current 50 kA AC/8 kA DC For further information, go to www.siemens.de/sentron © Siemens AG 2015. All rights reserved. Industry Sector NEOZED bus-mounting base Approvals NEOZED bus-mounting base Approval to IEC 60269-3 No CSA or UL approval!! © Siemens AG 2015. All rights reserved. Industry Sector DIAZED bus-mounting base DIAZED bus-mounting base © Siemens AG 2015. All rights reserved. Industry Sector DIAZED bus-mounting base Technical data Approvals Device selection DIAZED bus-mounting base © Siemens AG 2015. All rights reserved. Industry Sector DIAZED bus-mounting base Technical data DIAZED bus-mounting base DIAZED bus-mounting base for 3-pole 60 mm busbar systems Suitable for the use of DIAZED adapter rings and DIAZED adapter screws Available in sizes DII and DIII Rated operational current up to 63 A Rated operational voltage 500 V AC/DC (size DII), 690 V AC/600 V DC (size DIII) Rated frequency 50 Hz Conditional short-circuit current 50 kA AC/8 kA DC For further information, go to www.siemens.de/lowvoltage © Siemens AG 2015. All rights reserved. Industry Sector DIAZED bus-mounting base Approvals DIAZED bus-mounting base Approval to IEC 60269-3 No CSA or UL approval!! © Siemens AG 2015. All rights reserved. Industry Sector SIRIUS 3SE5 position switch SIRIUS 3SE5 position switch © Siemens AG 2015. All rights reserved. Industry Sector SIRIUS 3SE5 position switch Technical data Approvals Device selection SIRIUS 3SE5 position switch © Siemens AG 2015. All rights reserved. Industry Sector SIRIUS 3SE5 position switch Technical data SIRIUS 3SE5 position switch Position switch with tumbler to prevent protective doors opening at random or accidentally when there might still be a prevailing risk due to the operating status of the machine or system Plastic and metal enclosure Wide range of actuators Devices with ASIsafe electronics integrated in the enclosure Rated operational voltage 50/60 Hz 230 V AC/24 V DC Rated operational current up to 50/60 Hz 6 A AC/3 A DC For further information, go to www.siemens.de/sirius-erfassen © Siemens AG 2015. All rights reserved. Industry Sector 3SE5 SIRIUS position switch Approvals SIRIUS 3SE5 position switch Approval to IEC 60947-1 and IEC 60947-5-1 Approval to CSA C22.2 No. 14 UL 508, UL 50, and UL 746-C approval See UL report (UL File No. E44653) for further information © Siemens AG 2015. All rights reserved. Industry Sector SITOP power supply SITOP power supply © Siemens AG 2015. All rights reserved. Industry Sector SITOP power supply Technical data Approvals Device selection SITOP power supply © Siemens AG 2015. All rights reserved. Industry Sector SITOP power supply Technical data SITOP power supply Primary switched-mode power supplies convert 1-, 2-, or 3-phase line voltages and direct voltages into stabilized 24 V voltages (SITOP smart) Versions for other output voltages including 5, 12, and 48 V DC are available (SITOP compact, modular, etc.) High overload capability Rated output current from 2 to 40 A Rated output voltage 24 V DC (±3%) Rated input voltage up to 550 V AC For further information, go to www.siemens.de/sirius-versorgen © Siemens AG 2015. All rights reserved. Industry Sector SITOP power supply Approvals SITOP power supply Approval to IEC 60950-1 Approval to CSA C22.2 No. 60950-1-3 Approval to UL 508 Certified in accordance with ATEX guidelines See UL report (UL File No. E197259) for further information © Siemens AG 2015. All rights reserved. Industry Sector 7KM PAC measuring instrument 7KM PAC measuring instrument © Siemens AG 2015. All rights reserved. Industry Sector 7KM PAC measuring instrument Technical data Approvals Device selection 7KM PAC measuring instrument © Siemens AG 2015. All rights reserved. Industry Sector 7KM PAC measuring instrument Technical data 7KM PAC measuring instrument 7KM PAC measuring instrument for measuring and displaying all relevant line system parameters in low-voltage power distribution Can be used to take measurements in 3- and 4-wire systems (TN, TT, IT) Can be used in 50/60 Hz systems with up to 690/400 V Integrated communications interfaces Optional expansion module for additional interfaces Front mounting or standard rail mounting For further information, go to www.siemens.de/lowvoltage © Siemens AG 2015. All rights reserved. Industry Sector 7KM PAC measuring instrument Approvals 7KM PAC measuring instrument Approval to IEC 61010-1 Approval to CSA C22.2 No. 61010.1 Approval to UL 61010-1 Enclosure Type 5 acc. to UL 50 See UL report (UL File No. E314880) for further information © Siemens AG 2015. All rights reserved. Industry Sector EMERGENCY STOP PUSHBUTTON (3SB3 commanding and signaling device) EMERGENCY STOP PUSHBUTTON (3SB3 commanding and signaling device) © Siemens AG 2015. All rights reserved. Industry Sector EMERGENCY STOP PUSHBUTTON (3SB3 commanding and signaling device) Technical data Approvals Device selection EMERGENCY STOP PUSHBUTTON (3SB3 commanding and signaling device) © Siemens AG 2015. All rights reserved. Industry Sector EMERGENCY STOP PUSHBUTTON (3SB3 commanding and signaling device) Technical data EMERGENCY STOP PUSHBUTTON (3SB3 commanding and signaling device) Modular design commanding and signaling device range for front panel mounting and rear conductor connection Modern industrial design and quick mounting Supplied in plastic or metal enclosure Spring-loaded, solder pin, and screw terminal connections IEC ratings Rated operational current up to 10 A Rated operational voltage up to 400 V AC/230 V DC UL/CSA ratings Rated operational current up to 10 A Rated operational voltage up to 300 V AC For further information, go to www.siemens.de/sirius © Siemens AG 2015. All rights reserved. Industry Sector EMERGENCY STOP PUSHBUTTON (3SB3 commanding and signaling device) Approvals EMERGENCY STOP PUSHBUTTON (3SB3 commanding and signaling device) Approval to IEC 60947-5-1 and IEC 60947-5-5 Approval to CSA C22.2 No. 14 Approval to UL 508 See UL report (UL File No. E44653) for further information © Siemens AG 2015. All rights reserved. Industry Sector Main and emergency off switch Main and emergency off switch © Siemens AG 2015. All rights reserved. Industry Sector Main and emergency off switch Main and emergency off switch 8UC7 rotary operating mechanism with 3VL circuit breaker 8UC7 rotary operating mechanism with 3VL circuit breaker and 8UC94 00 interlocking module © Siemens AG 2015. All rights reserved. Industry Sector Main switch (3VL circuit breaker) Main switch (3VL circuit breaker) © Siemens AG 2015. All rights reserved. Industry Sector 8UC7 rotary operating mechanism 8UC7 rotary operating mechanism with 3VL circuit breaker 8UC7 rotary operating mechanism with 3VL circuit breaker and 8UC94 00 interlocking module © Siemens AG 2015. All rights reserved. Industry Sector 8UC7 rotary operating mechanism Technical data Approvals Device selection 8UC7 rotary operating mechanism EMERGENCY OFF version STANDARD version © Siemens AG 2015. All rights reserved. Industry Sector 8UC7 rotary operating mechanism Technical data 8UC7 rotary operating mechanism Rotary actuators for operating switchgear with panel doors closed Available in STANDARD and EMERGENCY OFF versions Can be connected to circuit breakers and switch disconnectors with or without fuses Rated operational current up to 1,600 A EMERGENCY OFF version Available in various sizes Degree of protection IP 65 when mounted For compliance with UL, must always be used in conjunction with 8UC94 00 interlocking module For compliance with UL, the rotary operating mechanism and the interlocking module remain on the circuit breaker even when the door is open For further information, go to www.siemens.de/lowvoltage STANDARD version © Siemens AG 2015. All rights reserved. Industry Sector 8UC7 rotary operating mechanism Approvals 8UC7 rotary operating mechanism Approval to IEC 60204-1, IEC 30439-1, and 60947-3 Approval to CSA Approval to UL 8UC94 00 interlocking module must be used to meet the door interlocking requirement set out in UL 508A Art. 65-67!! EMERGENCY OFF version STANDARD version © Siemens AG 2015. All rights reserved. Industry Sector Lines/cables Lines/cables © Siemens AG 2015. All rights reserved. Industry Sector NOTE: Applications consulting from Siemens AG is a free-of-charge service for our customers. Information, recommendations or instructions (hereinafter referred to as "information") from Siemens AG are intended to assist the customer and represent descriptions of performance or performance features of the respective products. Customers are themselves responsible for proper operation of the products within the scope of the applicable regulations. According to statutory regulations, Siemens AG is liable for the free-of-charge information only in the event of intent or gross negligence. Beyond this scope, liability on the part of Siemens AG is excluded. This shall not apply in cases where statutory liability is cogent, e.g. under the terms of product liability law. © Siemens AG 2015. All rights reserved. Industry Sector