IEC Power Control Combination Starters & Starters for Group Installation Contents Self Protected Motor Starters per UL 508 Type E 3RA6 3RA61 / 3RA62 up to 32 A for mounting rail, surface, comb busbar, infeed system Page 3RA64 / 3RA65 up to 32 A for mounting rail, surface, comb busbar, infeed system Page 3RA68 up to 100 A for 3RA6 direct and reversing starters Selection and ordering data Selection and ordering data Selection and ordering data • Direct start, Reversing duty 4/7 • Accessories 4/9-4/13 • Direct start, Reversing duty 4/8 • Accessories 4/9-4/13 • Infeed Components • Accessories Page 4/16-4/19 4/20-4/21 Combination starters & starters for group installation 3RA1/3RA2 3RA1/3RA2 up to 100 A for mounting rail and Fast Bus busbar systems Page 3RA11/3RA22 up to 100 A for mounting rail and Fast Bus busbar systems Page Selection and ordering data Selection and ordering data • Direct start • Accessories 4/36-4/39 4/44-4/52 • Reversing duty • Accessories 4/40-4/43 4/44-4/52 Technical data Installation guidelines Circuit diagrams Dimension drawings 4/53-4/58 4/59-4/67 4/67 4/68-4/71 Technical data Installation guidelines Circuit diagrams Dimension drawings 4/53-4/58 4/59-4/67 4/67 4/68-4/71 Siemens Industry, Inc. Industrial Controls Catalog 4/1 Compact Combination Starters For Operation in the Control Cabinet SIRIUS SIRIUS3RA6 3RA6Compact CompactStarters Starters SIRIUS General General data data Overview 3RA6 compact starters and infeed system for 3RA6 Communications integration using IO-Link Up to 4 IO-Link compact starters (reversing and direct-on-line starters) can be connected together and conveniently linked to the IO-Link master through a standardized IO-Link connection. The SIRIUS 4SI solid-state module is used for example as an IO-Link master for connection to the SIMATIC ET 200S distributed I/O system. The IO-Link connection enables a high density of information to be passed from device to PLC. For details on the communications integration using IO-Link see Chapter 2 "Industrial Communication" --> "IO-Link". The diagnostics data of the process collected by the 3RA6 compact starter, e. g. short-circuit, end of service life, limit position etc., are not only indicated on the compact starter itself, but also transmitted to the higher-level control system through IO-Link. An optional operator panel, which can be installed in the control cabinet door, allows for easy control of the 3RA6 IO-Link compact starter from the control cabinet door. 3RA62 reversing starter Integrated functionality The SIRIUS 3RA6 compact starters are a generation of innovative motor starters with the integrated functionality of a motor starter protector, contactor and solid-state overload relay. In addition, various functions of optional mountable accessories (e. g. auxiliary switches, surge suppressors) come standard with the SIRIUS compact starter. 6 Application The SIRIUS compact starters can be used wherever standard induction motors up to 32 A (approx. 20 HP/460 V) are directly started. The compact starters are not suitable for the protection of singlephase AC or DC loads. The Compact Starter carries IEC, UL, and CSA approvals. Low equipment variance Thanks to wide setting ranges for the rated current and wide voltage ranges, the equipment variance is greatly reduced compared to conventional motor starters. Very high operational reliability Thanks to the high short-circuit breaking capacity and weld-free capability when the end of service life is reached, the SIRIUS compact starter achieves a very high level of operational reliability that would otherwise have only been possible with considerable additional overhead. This sets it apart from devices with similar functionality. Safe disconnection The auxiliary switches of the 3RA6 compact starters are designed as mirror contacts. It is thus possible to use the devices for safe disconnection, e. g. emergency-stops, up to Category 2 (EN 954-1) and together with other redundancy switching devices up to Category 3 or 4. Communications integration with AS-Interface To enable communications integration through AS-Interface there is an AS-i add-on module available in several versions which can be mounted on the SIRIUS compact starter in place of its control circuit terminals. The design of the AS-i add-on module permits a group of up to 62 starters to be connected to the control system using just 4 cables. This reduces wiring work considerably compared to the conventional wiring method. 4/2 6/32 SIRIUS Innovations Supplement 2012 Permanent wiring / easy replacement Using the SIRIUS infeed system for 3RA6 (see page 4/16) it is possible to carry out the wiring in advance without a compact starter needing to be connected. A compact starter can be very easily replaced simply by pulling it out of the infeed system without disconnecting the wiring. Regardless of whether the infeed system is mounted to a flat surface, or on a DIN rail, there is no need to disconnect any wiring (on account of the removable main and control circuit terminals) in order to replace a compact starter. Consistent solution from the infeed to the motor starter The SIRIUS infeed system for 3RA6 (with integrated PE bar) is offered as a user-friendly possibility of supplying up to 100 A to attached starters with a maximum wire cross section of 2/0 AWG while connecting the motor cable directly without additional intermediate terminals. Screw and spring-type connections The SIRIUS compact starters and the infeed system for 3RA6 are available with screw and spring-type connections. Screw terminals Spring-type terminals These terminals are indicated in the corresponding tables by the symbols shown above. System configurator for engineering A free system configurator is available to further reduce the amount of engineering work for selecting the required compact starters and matching infeed. Types of infeed for the 3RA6 compact starters In total, four different infeed possibilities are available: • Conventional wiring •Use of three-phase busbars (combination with SIRIUS motor starter protectors and SIRIUS contactors possible) • 8US Fast Bus busbar adapters • SIRIUS infeed system for 3RA6 (see page 4/16) Siemens Industry, Inc. Industrial Controls Catalog ForCompact OperationCombination in the ControlStarters Cabinet SIRIUS3RA6 3RA6Compact CompactStarters Starters SIRIUS SIRIUS General data General data To comply with the clearance and creepage distances demanded according to UL 508 there are the following infeed possibilities: Note: Type of infeed Feeder terminal (according to UL 508, type E) Type www.siemens.com/compactstarter Conventional wiring Terminal block for "SelfProtected Combination Motor Controller (Type E)" 3RV29 28-1H Three-phase busbars Three-phase infeed terminal for constructing "Type E Starters", UL 508 3RV29 25-5EB Overload tripping times With autoreset there is no need to open the control cabinet. 3RA68 13-8AB (screw terminals), 3RA68 13-8AC (spring-type terminals) SIRIUS 3RA6 compact starters The SIRIUS 3RA6 compact starters are universal motor starters according to IEC/EN 60947-6-2. As control and protective switching devices (CPS) they can connect, convey and disconnect the thermal, dynamic and electrical loads from short-circuit currents up to Iq = 30 kA, i.e. they are essentially weld-free. They combine the functions of a motor starter protectors, a contactor and a solid-state overload relay in a single enclosure and can be used wherever standard induction motors up to 32 A (up to approx. 20 HP at 480 V AC) are started directly. Available versions are the direct-on-line starters with 45 mm width and the reversing starters with 90 mm width. The reversing starter version comes with not only an internal electrical interlock but also with a mechanical interlock to prevent simultaneous actuation of both directions of rotation. 3RA6 compact starters are supplied in 5 current setting ranges. The 3RA61 and 3RA62 have 3 control voltage ranges (AC/DC), the 3RA64 and 3RA65 have one control voltage range (DC): Current setting range At 460 V AC for Rated control supply voltage for induction 3RA61, 3RA62 3RA64, 3RA65 motors compact starters compact starters Standard for IO-Link output P A HP V AC/DC V DC 0.1 ... 0.4 -- 24 24 0.32 ... 1.25 1/2 1 ... 4 2 3 ... 12 7 1/2 8 ... 32 20 The overload tripping time can be set on the device to less than 10 s (CLASS 10) and less than 20 s (CLASS 20 for heavy starting). As the breaker mechanism still remains closed after an overload, resetting is possible by either local manual reset or autoreset after 3 minutes cooling time. 110 ... 240 Note: The 3RA1 motor starters can be used as motor starters > 32 A up to 100 A. The SENTRON 3VL circuit breakers and the SIRIUS 3RT contactors can be used for motor starters >100 A. Diagnostics options The compact starter provides the following diagnostics options on site: • With LEDs - Connection to the control voltage - Position of the main contacts • With mechanical indication - Tripping due to overload - Tripping due to short-circuit - Tripping due to malfunction (end of service life reached because of worn switching contacts or a worn switching mechanism or faults in the control electronics) These states can also be evaluated in the higher-level control system: • With conventional wiring using the integrated auxiliary and signaling switches of the compact starter • With AS-Interface or IO-Link in even greater detail using the respective communication interface Four complement variants for 3RA6 compact starters • For standard mounting rail or screw mounting: basic version including 1 pair of main circuit terminals and 1 pair of control circuit terminals • For standard mounting rail or screw mounting when using the AS-i add-on module: comes without control circuit terminals because the AS-i addon module is attached in lieu of them • For use with the infeed system for 3RA6: without main circuit terminals because they are supplied with the infeed system and the expansion modules • For use with the infeed system for 3RA6 and AS-i add-on module: without main or control circuit terminals as they are not needed • The control circuit terminals are always required by the compact starters for IO-Link; the main circuit terminals depend on the use of the infeed system. Additional components of the 3RA6 The two control circuit terminals on the 3RA61/3RA62 allow access to signalling contacts for overload (1 CO) and shortcircuit / malfunction (1 NO). Furthermore, the 3RA61 has two auxiliary contacts (1 NO + 1 NC) for indicating the position of the main contacts, while the 3RA62 has one auxiliary contact (1 NO) per direction of rotation per main contact. Operating conditions The SIRIUS 3RA6 compact starters are suitable for use in nearly all climates. They are intended for use in enclosed rooms in which no severe operating conditions (such as dust, caustic vapors, hazardous gases) prevail. Suitable covers must be provided for installation in dusty and damp locations. The SIRIUS compact starters are generally designed to degree of protection IP20. The permissible ambient temperature during operation is -20 to +60 °C. The maximum short-circuit current based on UL testing is 30 kA up to 12 A and 15 kA for the 8 ... 32 A versions at 480 V. Siemens Industry, Inc. Industrial Controls Catalog 4/3 SIRIUS Innovations Supplement 2012 6/33 6 Infeed systems for 3RA6 Infeed on left, 50/70 mm2, screw terminal with 3 sockets, outgoing terminal with screw/spring-type connections, including PE bar More technical specifications can be found in the system manual at Compact Combination Starters 3RA6 Compact Starters SIRIUS Overview Function Trip units Control through AS-Interface The SIRIUS 3RA6 compact starters are equipped with the following trip units: • Inverse-time delayed solid-state overload release • Instantaneous electronic trip unit (electromagnetic shortcircuit release) For control through AS-Interface, the AS-i add-on module is mounted instead of the two control circuit terminals on the SIRIUS 3RA6 compact starters (direct-on-line starters and reversing starters). The overload releases can be adjusted in accordance with the load current. The electronic trip units are permanently set to a value 13 times the maximum rated current of the 4 A, 12 A and 32 A starter and thus enable trouble-free starting of motors. Trip classes The trip classes of electronically delayed trip units are based on the tripping time (tA) at 7.2 times the set current in the cold state (excerpt from IEC 60947-4): CLASS 10: 4s < tA < 10 s CLASS 20: 6s < tA < 20 s (for heavy starting) The compact starter must trip within this time. Disconnection due to malfunction The following malfunctions can be detected: • End of service life - Worn switching contacts (for electrical endurance see "Technical data") - Worn switching mechanisms (for mechanical endurance see "Technical data") • Faults in the control electronics Short-circuit protection If a short-circuit occurs, the short-circuit releases of the SIRIUS 3RA6 compact starters isolate the faulty motor starter from the network and thus prevent further damage. The shortcircuit releases are factory-set to 14 times the value of the maximum rated current In of the device. The SIRIUS compact starters have a short-circuit breaking capacity up to 30 kA at a voltage of 480 V AC. Overload relay function In the event of an overload, the compact starter switches off without the breaker mechanism being opened. The overload trip can be signaled to the higher-level control system through an integrated signal switch. The overload signal can be reset automatically or by means of a manual reset. 4/4 The AS-i auxiliary voltage and the AS-i data line are installed on the AS-i add-on module easily and quickly without tools by means of two plug-in connector blocks with insulation displacement connection. The AS-i add-on module is equipped with the latest A/B technology and has an addressing socket onboard. An addressing unit is required and can be ordered for addressing the AS-i add-on module. Bit assignment (see below) is similar to that for the SIRIUS motor starters, which means that the same programming can be used here. DI 0.0 ready DI 0.1 motor on DI 0.2 group fault DI 0.3 group warning DO 0.0 motor on or motor clockwise DO 0.1 motor counterclockwise A 24 V DC PELV power supply unit according to EN 61140 safety class III is required for the auxiliary voltage. The AS-i data line is supplied with voltage by means of a 30 V DC AS-i power supply unit and is controlled by means of the AS-i master. The AS-i add-on modules are available in the following five versions: • AS-i add-on module for compact starters • AS-i add-on module for compact starters with two local inputs for safe disconnection of the "clockwise rotation" or "counterclockwise rotation" outputs • AS-i add-on module with two free external inputs • AS-i add-on module with two free external outputs • AS-i add-on module with one free external input and output The AS-i add-on module can only be used with compact starters with a control voltage of 24 V AC/DC. Integrated auxiliary switches The control circuit terminals of the SIRIUS 3RA6 compact starters have the following connections: • A1/A2 for the control voltage for 3RA61, A1/A2 and B1/B2 for the control voltage for 3RA62 • "Overload" signal switch • "Fault" signal switch, e. g. "short-circuit" • Internal auxiliary switch for position of the main contacts (in case of direct-on-line starters: 1 NO + 1 NC with mirror contact to the main contact; in case of reversing starters: 2 NO) Siemens Industry, Inc. Industrial Controls Catalog Compact Combination Starters 3RA6 Compact Starters SIRIUS Overview Design Mounting 3) By integrating in the infeed system for 3RA6 The 3RA6 compact starters can be mounted in 4 ways: The SIRIUS compact starters can be assembled with the infeed system for 3RA6 (see "Infeed system for 3RA6"). 1) By snapping onto a TH 35 standard mounting rail The SIRIUS compact starters can be snapped onto a standard mounting rail according to EN 60715 with a width of 35 mm. c 2) By screw fixing to a flat surface The SIRIUS compact starters are suitable for screw fixing to a flat surface. One set of 3RA69 40-0A adapters for screw connection (including push-in lugs) is required per direct-on-line starter, two sets are required per reversing starter. NSB0_01882 NSB0_01880 cli 4) By using the 8US busbar adapter for Fast Bus systems with 60 mm busbar center-to-center clearance 2 4 1 5 1 5 3 6 5 3 NSB0_01921 2 NSB0_01881 1 2 1 ... 5: order of mounting steps 4 4 1 ... 6: order of mounting steps Siemens Industry, Inc. Industrial Controls Catalog 4/5 Compact Combination Starters 3RA6 Compact Starters SIRIUS Overview 4a) By using an additional device holder in the case of reversing starters When the 8US busbar adapter is used on Fast Bus systems with 60 mm busbar center-to-center clearance, a device holder is needed in addition for a reversing starter on account of its double width. NSB0_01922 The reversing starter is mounted in the same way as the directon-line starter on the busbar adapter. Then the device holder is snapped on alongside the busbar adapter. Mounting regulations > 10 NSB0_01883 > 10 > 30 > 30 The module can be installed horizontally or vertically. For the different installations attention must be paid however to limit values for protective separation according to IEC/EN 60947-2 of the compact starters (for details see the "Technical specifications"). The following distances must be observed when mounting the compact starters: • Lateral clearance to grounded components: 10 mm • Arcing space at top and bottom: 30 mm 4/6 Siemens Industry, Inc. Industrial Controls Catalog Compact Combination Starters For Operation in the Control Cabinet SIRIUS SIRIUS 3RA6 Compact Starters SIRIUS 3RA6 Compact Starters 3RA61, 3RA62 compact starters 3RA61 direct-on-line starters 3RA61, 3RA62 compact starters 3RA61 direct-on-line starters Selection and ordering data Width 90 mm One set of 3RA69 40-0A adapters is required for screw fixing. Width 45 mm One set of 3RA69 40-0A adapters is required for screw fixing. 3RA61 20-1CB32 Standard induction motor 4-pole at 400 V AC1) 3RA61 20-2EB32 3RA62 50-1CP32 Setting range for solid-state overload release 3RA62 50-1CP32 Order No. Order No. 3RA6 @ 0-0A @30 — 3RA6 @ 0-0C @30 — Standard output P HP A For use with the infeed system for 3RA6 and with the AS-i add-on module or as a replacement device, without main and control circuit terminals -- 0.1 ... 0.4 1/2 0.32 ... 1.25 2 1 ... 4 7 1/2 3 ... 12 20 8 ... 32 3RA6 @ 0-0B @30 3RA6 @ 0-0D @30 3RA6 @ 0-0E @30 6 For standard mounting rail or screw mounting, including 1 pair of main circuit terminals and 1 pair of control circuit terminals -- 0.1 ... 0.4 1/2 0.32 ... 1.25 2 1 ... 4 7 1/2 3 ... 12 20 8 ... 32 -- 0.1 ... 0.4 1/2 0.32 ... 1.25 2 1 ... 4 7 1/2 3 ... 12 20 8 ... 32 -- 0.1 ... 0.4 1/2 0.32 ... 1.25 2 1 ... 4 7 1/2 3 ... 12 20 8 ... 32 3RA6 @ 0-1A @32 3RA6 @ 0-2A @32 3RA6 @ 0-2B @32 3RA6 @ 0-1D @32 3RA6 @ 0-2C @32 3RA6 @ 0-2D @32 3RA6 @ 0-1A @33 3RA6 @ 0-2A @33 3RA6 @ 0-1C @33 3RA6 @ 0-2C @33 3RA6 @ 0-1E @32 3RA6 @ 0-1B @33 3RA6 @ 0-1D @33 3RA6 @ 0-1E @33 3RA6 @ 0-1A @34 3RA6 @ 0-1B @34 3RA6 @ 0-1C @34 3RA6 @ 0-1D @34 3RA6 @ 0-1E @34 Order No. supplements for rated control supply voltage • Direct-on-line starter • Reversing duty starter • 24 V AC/DC (for combining with AS-I add-on module) • 110 … 240 V AC/DC 12 25 1) Selection depends on the motor full load amps. Horse Power ratings provided for reference only. 2) A set of 3RA69 40-0A adapters is required for screw mounting. Siemens Industry, Inc. Industrial Controls Catalog 6/40 Product Category: IEC SIRIUS Innovations Supplement 2012 — Spring-type terminals 3RA6 @ 0-1C @32 For standard mounting rail or screw mounting when using the AS-i add-on module with 1 pair of main circuit terminals, without control circuit terminals — Screw terminals2) 3RA6 @ 0-1B @32 For use in the infeed system for 3RA6, without main circuit terminals, with 1 pair of control circuit terminals — B P 3RA6 @ 0-2E @32 3RA6 @ 0-2B @33 3RA6 @ 0-2D @33 3RA6 @ 0-2E @33 3RA6 @ 0-2A @34 3RA6 @ 0-2B @34 3RA6 @ 0-2C @34 3RA6 @ 0-2D @34 3RA6 @ 0-2E @34 12 25 B P 4/7 Illustrations are approximate Compact Combination Starters SIRIUS 3RA6 Compact Starters SIRIUS 3RA64, 3RA65 compact starters for IO-Link Selection and ordering data •Direct-on-line starters •Rated control supply voltage 24 V DC •Width 45 mm 3RA64 with 3RA69 11-1A auxilliary switch block •One set of 3RA69 40-0A adapters is required for screw fixing Standard induction motor 3-pole at 460 V AC Standard output P Setting range for solid-state overload release Screw terminals Spring-type terminals HP 1) A Order No. Order No. For standard mounting rail or screw moutning, including 1 pair of main circuit terminals and 1 pair of control circuit terminals -- 0.1 … 0.4 3RA64 00-1AB42 3RA64 00-2AB42 1⁄2 0.32 … 1.25 3RA64 00-1BB42 3RA64 00-2BB42 3RA64 00-2CB42 2 1…4 3RA64 00-1CB42 7 1⁄2 3 … 12 3RA64 00-1DB42 3RA64 00-2DB42 20 8 … 32 3RA64 00-1EB42 3RA64 00-2EB42 For use in the infeed system for 3RA6, without main circuit terminals, with 1 pair of control circuit terminals — 0.1 … 0.4 3RA64 00-1AB43 3RA64 00-2AB43 1⁄2 0.32 … 1.25 3RA64 00-1BB43 3RA64 00-2BB43 2 1…4 3RA64 00-1CB43 3RA64 00-2CB43 7 1⁄2 3 … 12 3RA64 00-1DB43 3RA64 00-2DB43 20 8 … 32 3RA64 00-1EB43 3RA64 00-2EB43 •Reversing starters •Rated control supply voltage 24 V DC •Width 90 mm 3RA65 with 3RA69 11-1A auxilliary switch block •One set of 3RA69 40-0A adapters is required for screw fixing For standard mounting rail or screw moutning, including 1 pair of main circuit terminals and 1 pair of control circuit terminals -- 0.1 … 0.4 3RA65 00-1AB42 3RA65 00-2AB42 1⁄2 0.32 … 1.25 3RA65 00-1BB42 3RA65 00-2BB42 2 1…4 3RA65 00-1CB42 3RA65 00-2CB42 3 … 12 3RA65 00-1DB42 3RA65 00-2DB42 8 … 32 3RA65 00-1EB42 3RA65 00-2EB42 1⁄2 7 20 For use in the infeed system for 3RA6, without main circuit terminals, with 1 pair of control circuit terminals -- 0.1 … 0.4 3RA65 00-1AB43 3RA65 00-2AB43 1⁄2 0.32 … 1.25 3RA65 00-1BB43 3RA65 00-2BB43 2 1…4 3RA65 00-1CB43 3RA65 00-2CB43 7 1⁄2 3 … 12 3RA65 00-1DB43 3RA65 00-2DB43 20 8 … 32 3RA65 00-1EB43 3RA65 00-2EB43 1) Selection depends on the motor full load amps. Horse power ratings provided for reference only. 4/8 Siemens Industry, Inc. Industrial Controls Catalog Compact Combination Starters For Operation in the Control Cabinet SIRIUS 3RA6 Compact Starters Accessories SIRIUS 3RA6 Compact Starters Accessories Overview Accessories for SIRIUS 3RA6 compact starters 8US Fast Bus busbar adapters for 60 mm systems The following accessories are available for the 3RA6 compact starters: •AS-i add-on module: see AS-Interface Add-On Modules for 3RA6, page 4/14 The compact starters are mounted directly with the aid of busbar adapters on the Fast Bus busbar systems with 60 mm center-tocenter clearance in order to save space and to reduce infeed times and costs. These starters are suitable for copper busbars with a width from 12 to 30 mm. The busbars can be 5 mm or 10 mm thick. • External auxiliary switch blocks: Snap-on auxiliary switch as versions 2 NO, 2 NC and 1 NO +1 NC with screw or springtype connections; the contacts of the auxiliary switch block open and close jointly with the main contacts of the compact starter. The NC contacts are designed as mirror contacts. • Control kit: aid for manually closing the main contacts in order to evaluate the wiring and motor direction under conditions of short-circuit protection • Adapter for screw mounting the compact starter, including push-in lugs • Main circuit terminals: Available in screw and spring-type terminals • Main circuit terminals for mixed connection method: With the main circuit terminal for the mixed connection method it is also possible in the main circuit to change over from the screw connection method on the incoming side to the springtype connection method on the outgoing side. This enables for example the side-by-side mounting of several compact starters and their cost-effective connection using the three-phase busbars on the infeed side. The motors are then directly connected by the quick and reliably contacting spring-type connection method. Accessories for UL applications 6 The terminal block for "Self-Protected Combination Motor Controller", type E is available for complying with the clearance and creepage distances according to UL 508. Accessories for infeed using three-phase busbar systems The three-phase busbars can be used as an easy, time-saving and clearly arranged means of feeding SIRIUS 3RA6 compact starters with screw connection. Motor starter protectors size S00 and S0 can also be integrated. The 8US Fast Bus busbar system can be loaded with a maximum summation current of 1400A. The "reversing starter" version requires a device holder along side the busbar adapter for lateral mounting. The compact starters are snapped onto the adapter and connected on the line side. This prepared unit is then plugged directly onto the busbar system, and is thus connected both mechanically and electrically at the same time. For more accessories such as incoming and outgoing terminals, flat copper profiles etc., see Section 5 “Fastbus Busbar Systems”. Accessories for operation with closed control cabinet doors Door-coupling rotary operating mechanisms for standard and emergency-stop applications are available for operating the compact starter with closed control cabinet doors. Accessories for SIRIUS 3RA6 compact starters in IO-Link version The following accessories are available specifically for the 3RA64, 3RA65 compact starters: • The 4SI SIRIUS solid-state module as IO-Link master allows for the simple and economical connection of SIRIUS controls with IO-Link (e.g up to four groups of 4 compact starters) to the multifunctional SIMATIC ET 200S distributed I/O system. • Additional connection cables for side-by-side mounting of up to 4 compact starters • Operator panel for local control and diagnostics of up to 4 compact starters coupled to each other The busbars are suitable for between 2 and 5 devices. However, any kind of extension up to a maximum summation current of 63 A is possible by clamping the terminals of an additional busbar (rotated by 180°) underneath the terminals of the respective last motor circuit protector. A connecting piece is required for the combination with motor starter protector size S00. S00 and S0 motor starter protectors of the 3RV2 series do not require the additional connecting piece. The motor starter protectors are supplied by appropriate feeder terminals. Special feeder terminals are required for constructing "Type E Starters" according to UL/CSA. The three-phase busbar systems are finger-safe but empty connection terminals must be fitted with covers. They are designed for any short-circuit stress which can occur at the output side of connected SIRIUS 3RA6 compact starters or motor starter protectors. Siemens Industry, Inc. Industrial Controls Catalog 6/44 4/9 SIRIUS Innovations Supplement 2012 Compact Combination Starters For Operation in the Control Cabinet SIRIUS SIRIUS 3RA6 Compact Starters SIRIUS 3RA6 Compact Starters Accessories Accessories Selection and ordering data Version Order No. Std. pack qty. Weight approx. kg Accessories for 3RA6 compact starters Control kits 3RA69 50-0A 1 unit 0.004 3RA69 40-0A 1 unit 0.152 1 unit 0.018 1 unit 0.018 For mechanical actuation of the compact starter 3RA69 50-0A Adapters for screw mounting the compact starter (set including push-in lugs) Direct-on-line starters require 1 set, reversing starters 2 sets. 3RA69 40-0A Screw terminals Auxiliary switch blocks for compact starters • 2 NO • 2 NC 3RA69 11-1A 3RA69 12-1A • 1 NO +1 NC 3RA69 13-1A 1 unit 0.018 Main circuit terminals (line and load side) 3RA69 20-1A 1 unit 0.038 3RA69 20-1B 1 unit 0.042 1 unit 0.042 1 unit 0.018 1 unit 0.018 3RA69 11-1A Control circuit terminals • For 3RA61 • For 3RA62 6 3RA69 20-1A 3RA69 20-1C 3RA69 20-1B Spring-type terminals Auxiliary switch blocks for compact starters • 2 NO • 2 NC 3RA69 11-2A 3RA69 12-2A • 1 NO +1 NC 3RA69 13-2A 1 unit 0.018 Main circuit terminals (line and load side) 3RA69 20-2A 1 unit 0.049 3RA69 20-2B 1 unit 0.036 1 unit 0.036 3RA69 11-2A 3RA69 20-2A Control circuit terminals • For 3RA61 • For 3RA62 3RA69 20-2C 3RA69 20-2B 4/10 * You can order this quantity or a multiple thereof. Illustrations are approximate SIRIUS Innovations Supplement 2012 Siemens Industry, Inc. Industrial Controls Catalog 6/45 Compact Combination Starters For Operation in the Control Cabinet SIRIUS 3RA6 Compact Starters SIRIUS SIRIUS 3RA6 Compact Starters Accessories Accessories Version Order No. Std. pack qty. Weight approx. kg Accessories for 3RA6 compact starters (continued) Main circuit terminals for mixed connection method One set comprises: • 1 joint block on the line side for the screw connection method • 1 joint block on the motor side for the spring-type connection method 3RA69 20-3A 1 unit 0.044 Version Order No. Std. pack qty. Weight approx. 3RA69 20-3A kg Accessories specifically for 3RA64, 3RA65 compact starters with IO-Link Additional connection cables (flat) for side-byside mounting of up to 4 compact starters • 10-pole - 8 mm1) 3RA69 32-0A - 200 mm1) 5 units 0.007 3RA69 33-0B 5 units 0.012 3RA69 31-0A 5 units 0.007 • 14-pole - 8 mm2) 3RA69 31-0A - 200 mm Operator panels (incl. enabling block, blanking cover and assembly bracket) 3RA69 33-0C 3RA69 35-0A 5 units 0.014 1 unit 0.052 1 unit 0.002 3RA69 35-0A 3RA69 36-0A Enabling block 6 Blanking covers 3RA69 36-0B Connection cable (round) for connecting the operator panel 10-pole, 2 000 mm 3RK1 005-0LB00-0AA0 1) SIRIUS 4SI solid-state modules IO-Link master for connection of up to 4 SIRIUS controls (max. 16 in groups of 4) with IOLink (3-wire connection) to SIMATIC ET 200S, width 15 mm, supports firmware update (STEP 7 V5.4 SP5 and higher) Can be used with the following terminal modules: • TM-E15S26-A1 (screw terminals) • TM-E15C26-A1 (spring-type terminals) • TM-E15N26-A1 (Fast Connect) 10-pole connection cables are required for EMERGENCY-STOP group concepts. Version 2) 5 units 0.001 3RA69 33-0A 1 unit 0.114 3RK1 005-0LB00-0AA0 1 unit 0.057 Is included in the scope of supply of the SIRIUS 3RA6 compact starter in IO-Link version. Order No. Std. pack qty. Weight approx. kg Terminal blocks and phase barriers for "Self-Protected Combination Motor Controllers (Type E)" according to UL 508 3RV29 28-1H Siemens Industry, Inc. Industrial Controls Catalog 6/46 Note: UL 508 demands 1-inch clearance and 2-inch creepage distance on the line side for "Combination Motor Controller Type E". The following terminal blocks or phase barriers must be used in 3RV20 motor starter protectors. The terminal blocks or phase barriers cannot be used in combination with the 3RV19 .5 three-phase busbars. For construction with three-phase busbars, see "Busbar accessories". Terminal blocks type E For extended clearance and creepage distances (1 and 2 inch) S00, S0 3RV29 28-1H 1 unit 0.065 4/11 SIRIUS Innovations Supplement 2012 * You can order this quantity or a multiple thereof. Illustrations are approximate Compact Combination Starters For Operation in the Control Cabinet SIRIUS 3RA6 Compact Starters SIRIUS SIRIUS 3RA6 Compact Starters Accessories Accessories Number of compact Modustarters and motor lar starter protectors that spacing can be connected Rated current In at 690 V For motor starter protector Order No. Std. pack qty. Weight approx. without lateral accessories mm Size A kg Three-phase busbars for infeed with 3RA6 For feeding several compact starters and/or motor starter protectors with screw terminals, mounted side by side on standard mounting rails, insulated, with touch protection. 3RV19 15-1AB 2 3 4 5 3RV19 15-1BB 45 45 45 45 S01) S01) S01) S01) 63 63 63 63 3RV19 15-1AB 3RV19 15-1BB 3RV19 15-1CB 3RV19 15-1DB 1 unit 1 unit 1 unit 1 unit 0.044 0.071 0.099 0.124 Std. pack qty. Weight approx. 3RV19 15-1CB 3RV19 15-1DB 1) Not suitable for 3RV11/3RV21 motor starter protectors for motor protection with overload relay function and for 3RV17/3RV27 and 3RV18/3RV28 motor starter protectors according to UL 489 / CSA C22.2 No.5-02. The joint clamping of motor starter protectors size S00 and size S0 is not possible due to the different modular spacings and the different height of the terminals. The 3RV19 15-5DB connecting piece is available for connecting the compact starters to motor starter protectors size S00. Version Modular spacing For motor starter protector mm Size 45 S00 3RV19 15-5DB For connecting compact starters (left) and motor starter protectors size S00 (right) Covers for connection terminals of the three-phase busbars Touch protection for empty positions kg 3RV19 15-5DB 1 unit 0.042 3RV19 15-6AB 10 units 0.003 6 Connecting pieces for three-phase busbars Order No. -- S00, S0 3RV19 15-6AB Conductor cross-section Tightening Solid or Finely AWG stranded stranded cables, solid torque with end or stranded sleeve For compact starters and motor starter protectors mm² Nm Size 3 ... 4 S00, S0 3RV29 25-5AB 0.043 Input: 4, Output: 2 ... 2.5 S00, S0 3RV29 15-5B 0.093 3RV29 25-5EB 0.044 mm² AWG Order No. Weight approx. kg Three-phase feeder terminals Connection from top 2.5 ... 16 2.5 ... 16 10 ... 4 Connection from below1) 3RV29 25-5AB 2.5 ... 16 2.5 ... 16 10 ... 4 3RV29 15-5B Three-phase feeder terminals for constructing "Type E Starters" for three-phase busbars Connection from top 2.5 ... 16 2.5 ... 16 10 ... 4 3 ... 4 S00, S0 3RV29 25-5EB 1) This terminal is connected in place of a switch, please take the space requirement into account. 4/12 * You can order this quantity or a multiple thereof. Illustrations are approximate SIRIUS Innovations Supplement 2012 Siemens Industry, Inc. Industrial Controls Catalog 6/47 ForCompact OperationCombination in the ControlStarters Cabinet SIRIUS SIRIUS3RA6 3RA6Compact CompactStarters Starters SIRIUS Accessories Accessories Version Order No. Std. pack qty. Weight approx. kg 8US Fast Bus busbar adapters for 60 mm systems 8US12 11-1NS10 1 unit 0.337 Required in addition to the busbar adapter for mounting a reversing starter 8US12 50-1AA10 1 unit 0.239 Version Order No. Std. pack qty. Weight approx. For flat copper profiles according to DIN 46433 Width: 12 ... 30 mm Thickness: 4 ... 5 mm or 10 mm 8US12 11-1NS10 Device holders for lateral mounting along side the Fast Bus busbar adapter for 60 mm systems 8US12 50-1AA10 Color of handle Version of extension shaft mm kg The door-coupling rotary operating mechanisms consist of a knob, a coupling driver and an extension shaft of 130/330 mm in length (6 mm x 6 mm). The door-coupling rotary operating mechanisms are designed to degree of protection IP65. The door interlocking prevents accidental opening of the control cabinet door in the ON position of the motor starter protector. The OFF position can be locked with up to 3 padlocks. 3RV29 26-0B Door-coupling rotary Black operating mechanisms EMERGENCY-STOP Red/ Yellow doorcoupling rotary operating mechanisms 130 3RV29 26-0B 1 unit 0.111 130 3RV29 26-0C 1 unit 0.110 Std. pack qty. Weight approx. Version Order No. kg Tools for opening spring-type terminals by hand 3RA29 08-1A Spring-type terminals Length approx. 200 mm, 3.0 mm x 0.5 mm, titanium gray/black, partially insulated 3RA29 08-1A Unit labeling plates1) for SIRIUS devices 20 mm x 7 mm, pastel turquoise 3RT19 00-1SB20 1 unit 0.045 340 units 0.200 NSB0_01429b Blank labels Screwdrivers for all SIRIUS devices with spring-type terminals 3RT19 00-1SB20 1) PC labeling system for individual inscription of unit labeling plates available from: Murrplastik Systems, Inc. www.murrplastik.com . Siemens Industry, Inc. * YouCatalog can order this quantity or a multiple thereof. Industrial Controls Illustrations are approximate 4/13 SIRIUS Innovations Supplement 2012 6/49 6 Door-coupling rotary operating mechanisms for operating the compact starter with closed control cabinet doors Compact Combination Starters For Operation in the Control Cabinet SIRIUS SIRIUS3RA6 3RA6Compact CompactStarters Starters SIRIUS Add-on AS-Interface Add-on modules modules for for AS-Interface Overview Various AS-i add-on modules are available for communication of the 3RA6 compact starter with the control system using AS-Interface: • Standard version • With two local inputs • With two free external inputs • With one free external input and one free external output • With two free external outputs • For local control The AS-i add-on modules can be combined only in connection with compact starters with a rated control supply voltage of 24 V AC/DC. AS-i add-on module for communications controlling With this new module it is also possible for the connected compact starter to be operated directly using simple switches, i.e. without recourse to AS-i Communication, if required. "Automatic" mode NC contacts can be connected to the inputs Y2 and Y4 through the local terminals on the AS-i add-on module. If the "+" connections are connected simultaneously to both local inputs, the AS-i add-on module will be in "Automatic" mode, i.e. it will communicate with the control system through AS-Interface. Local control 6 Opening the two inputs Y2 and Y4 will result in the direct disconnection of the compact starter. Operation through AS-i Communication is ended and the compact starter can now be switched on and off directly using NO contacts (one NO contact per direction of rotation on the reversing starter). Circuit diagram example for operating a 3RA61 20 direct-on-line starter using an AS-i add-on module for on-site controller "LED AUX Power" must light up green, the 24 V DC supply must be connected and the AS-i control supply voltage must no longer be applied. Resetting to "Automatic" mode Simultaneous application of a "1" signal at the local inputs. The availability bit DI 0 is switched to a "1" signal. If AS-i Communication is reset, the motor is first switched off and then on again when requested by the control system. Circuit diagram example for operating a 3RA62 50 reversing starter using an AS-i add-on module for on-site controller 4/14 6/50 SIRIUS Innovations Supplement 2012 Siemens Industry, Inc. Industrial Controls Catalog ForCompact OperationCombination in the ControlStarters Cabinet SIRIUS3RA6 3RA6Compact Compact Starters Starters SIRIUS SIRIUS Add-on AS-Interface Add-on modules modules for for AS-Interface Selection and ordering data Version 3RA69 70-3A 3RA69 70-3B to -3F Weight approx. kg Standard version For communication of the compact starter with the control system using AS-Interface 3RA69 70-3A 1 unit 0.045 With two local inputs 3RA69 70-3B 1 unit 0.045 With two free external inputs Replaces the digital standard inputs "Motor On" and "Group warning" 3RA69 70-3C 1 unit 0.045 With one free external input and one free external output Replaces the digital standard input "Group warning" 3RA69 70-3D 1 unit 0.045 With two free external outputs Only for direct-on-line starters, replaces the digital standard output "Motor left" 3RA69 70-3E 1 unit 0.045 For local control Control of the compact starter optionally using AS-Interface or local switches 3RA69 70-3F 1 unit 0.045 Addressing units • For active AS-Interface modules, intelligent sensors and actuators • According to AS-Interface Version 2.1 • Including expanded addressing mode • Scope of supply - 1 addressing unit - 1 operating manual (German, English, French, Spanish, Italian) - 1 addressing cable (1.5 m, with jack plug) 3RK19 04-2AB01 1 unit 0.540 For safe disconnection through local safety relays, e.g. cable-operated switches Accessories for AS-i add-on modules 3RK19 04-2AB01 Std. pack qty. Siemens Industry, Inc. * YouCatalog can order this quantity or a multiple thereof. Industrial Controls Illustrations are approximate 6 AS-i add-on modules Order No. 4/15 SIRIUS Innovations Supplement 2012 6/51 Compact Combination Starters For Operation in the Control Cabinet 3RA6 Compact StartersStarters SIRIUS 3RA6 Compact SIRIUS Infeed systems for 3RA6 up to 100 A Infeed systems for 3RA6 Overview The infeed system for 3RA6 compact starters enables far less wiring in the main circuit and, thanks to the easy exchangeability of the compact starters, reduces the usual downtimes for maintenance work during the plant's operating phase. The infeed system provides the possibility of completely prewiring the main circuit without a compact starter needing to be connected at the same time. As the result of the removable terminals in the main circuit, compact starters can be integrated in an infeed system in an easy manner (without the use of tools). In addition, the integrated PE bar means it is optionally possible to connect the motor cable directly to the infeed system without additional intermediate terminals. The infeed system for 3RA6 compact starters is designed for summation currents up to 100 A with a conductor cross-section of max. 2/0 AWG on the feeder terminal block. The infeed system can be mounted on a standard mounting rail or flat surfaces. 2 1 3 4 5 9 11 8 NSB0_01878 6 6 12 7 10 1 Feeder terminal 7 PE tap-off 2 Three-socket expansion module 8 Connecting plates 3 Two-socket expansion module 9 End cover 4 Expansion plug 10 45 mm adapter for SIRIUS motor starter protector size S0 5 PE infeed 11 3RA61 direct-on-line starter 6 PE expansion plug 12 3RA62 reversing starter Infeed system for 3RA6 compact starters 4/16 6/52 SIRIUS Innovations Supplement 2012 Siemens Industry, Inc. Industrial Controls Catalog SIRIUS ForCompact OperationCombination in the ControlStarters Cabinet SIRIUS3RA6 3RA6Compact CompactStarters Starters SIRIUS Infeed systems for 3RA6 upfor to3RA6 100 A Infeed systems Infeed 45 mm adapters for SIRIUS 3RV1 motor starter protectors 10 The 3-phase infeed is available as an infeed with screw connection (4-2 AWG up to 63 A or 0-2/0 AWG up to 100 A) and a an infeed with spring-type connection (4-2 AWG up to 63 A). SIRIUS 3RV1 motor starter protectors size S0 with screw connection can be fitted to the adapter, enabling them to be plugged into the infeed system. The infeed with spring-type terminal can be attached to the left side, as well as the right side, of an expansion module. Terminal blocks The screw terminal infeeds are permanently fitted to the left side of a 3-socket expansion module. Using the terminal block, three phase power can be fed out of the infeed system; this means that single-phase, two-phase and three-phase components can also be integrated in the system. The infeeds with screw connection enable connection of the main conductors (L1, L2, L3) either from above or from below. If the end cover is removed, the terminal block can be inserted into an expansion module. The infeeds with screw connection come packaged with 1 end cover, while the infeed with spring-type connection comes packaged with 2 end covers. Expansion plug for SIRIUS 3RV19 infeed systems 2 Three-socket expansion modules The expansion module with 3 sockets for compact starters is available with screw connection and with spring-type connection. Expansion modules enable the infeed system to be expanded and can be connected to each other in any number up to a maximum length of 1.2 meters. Two expansion modules are held together with the help of 2 connecting plates and 1 expansion plug. These assembly parts are included in the scope of supply of the respective expansion module. When the infeed system for 3RA6 compact starters is used, the compact starters (plug-in modules) are easily mounted and removed even when live. Optional possibilities: • PE connection on motor starter side • Outfeed for external auxiliary devices • Connection to 3RV19 or 3RV29 infeed system • Integration of SIRIUS 3RV1 motor starter protectors size S0 (using 3RA68 90-0BA adapter) 3 Two-socket expansion modules If only 2 instead of 3 additional sockets are required, then the 2-socket expansion module is the right choice. It has the same functionality as the 3-socket expansion module. 4 Expansion plug Two expansion modules can be connected together using the expansion plug. Flexible expansion of the infeed system is thus possible. 5 PE infeeds This module enables a PE cable to be connected. The PE infeed can be ordered with screw connection and spring-type connection (2 AWG) and can be fitted on the right or left to the expansion block. 6 PE expansion plug The PE expansion plug is inserted from below and enables two PE bars to be connected. 7 PE tap-off The PE tap-off is available with screw connection and springtype connection (10-8 AWG). It is snapped into the infeed system from below. 8 Connecting plates Two connecting plates are used to hold together 2 adjacent expansion modules. 9 End covers If the end cover is removed, the expansion plug for the SIRIUS 3RV19 infeed system can be inserted into an expansion module. It connects the infeed system for 3RA6 compact starters with the SIRIUS 3RV19 infeed system. Maximum rated operational current The following maximum rated operational currents apply for the components of the infeed system for 3RA6: Component Maximum rated operational current A Infeed with screw connection 0-2/0 AWG 100 Infeed with screw connection 4-2 AWG 63 Infeed with spring-type connection 4-2 AWG 63 Expansion plugs 63 When several expansion modules are mounted side by side, the maximum rated operational current from the 2nd expansion module to the end of the row is 63 A. Proposal for upstream short-circuit protection devices The following short-circuit data apply for the components of the infeed system for 3RA6 compact starters: Conductor Inscriptions crosssection Proposal for upstream short-circuit protection device AWG Short-circuit protection for infeed block (4-2 AWG) with screw connection 14-2 Id, max = 19 kA, I²t = 440 kA²s 3RV10 41-4JA10 Short-circuit protection for infeed block (0-2/0 AWG) with screw connection 14-2/0 Id, max = approx. 22 kA 3RV10 41-4MA10 Short-circuit protection for infeed block with spring-type connection 12 Id, max = 9.5 kA, I²t = 85 kA²s 3RV10 21-4DA10 10 Id, max = 12.5 kA, I²t = 140 kA²s 3RV10 31-4EA10 8 Id, max = 15 kA, I²t = 180 kA²s 3RV10 31-4HA10 6-4 Id, max = 19 kA, I²t = 440 kA²s 3RV10 41-4JA10 Short-circuit protection for terminal block 16 Id, max = 7.5 kA 5SY... 14 Id, max = 9.5 kA 1) 12 Id, max = 9.5 kA 10 Id, max = 12.5 kA 1) To prevent the possibility of short-circuits, the cables on the terminal block must be installed so that they are short-circuit proof according to EN 60439-1 Section 7.5.5.1.2. On the last expansion module of a row, the slot provided for the expansion plug can be covered by inserting the end cover. Siemens Industry, Inc. Industrial Controls Catalog SIRIUS Innovations Supplement 2012 4/17 6/53 6 1 Compact Combination Starters For Operation in the Control Cabinet SIRIUS SIRIUS3RA6 3RA6Compact CompactStarters Starters Infeed systems for 3RA6 up to 100 A Infeed systems for 3RA6 SIRIUS Selection and ordering data Version Order No. kg Three-phase infeeds and expansion modules Infeeds with screw connection 4-2 AWG left Infeed with screw connection with permanently fitted 3-socket expansion module with screw or spring-type terminals on the outgoing side and integrated PE bar 3RA68 12-8AB 3RA68 12-8AC 6 3RA68 13-8AB 3RA68 13-8AC Weight approx. Screw terminals Expansion module with 3 sockets for 3 direct-on-line starters or 1 direct-on-line starter and 1 reversing starter • Screw terminals on outgoing side 3RA68 12-8AB 0.957 • Spring-type terminals on outgoing side 3RA68 12-8AC 0.990 Infeeds with screw connection 0-2/0 AWG left Infeed with screw connection with permanently fitted 3-socket expansion module with screw or spring-type terminals on the outgoing side and integrated PE bar Expansion module with 3 sockets for 3 direct-on-line starters or 1 direct-on-line starter and 1 reversing starter, suitable for UL duty according to UL 508 Type E Screw terminals • Screw terminals on outgoing side 3RA68 13-8AB 1.146 • Spring-type terminals on outgoing side 3RA68 13-8AC 1.179 Infeeds with spring-type connection 4-2 AWG left or right Up to 63 A Spring-type terminals 3RA68 30-5AC 0.283 3RA68 30-5AC 4/18 6/54 Product Category: IEC SIRIUS Innovations Supplement 2012 Siemens Industry, Inc. Industrial Controls Catalog Illustrations are approximate ForCompact OperationCombination in the ControlStarters Cabinet SIRIUS SIRIUS3RA6 3RA6Compact CompactStarters Starters SIRIUS Infeed systems for for3RA6 3RA6 Infeed systems Version Expansion modules Order No. Weight approx. kg Two-socket expansion modules With screw or spring-type terminals and integrated PE bar with 2 sockets for 2 direct-on-line starters or 1 reversing starter Expansion plug and 2 connecting plates are included in the scope of supply. Screw terminals 3RA68 22-0AB 3RA68 22-0AB • Screw terminals 0.505 Spring-type terminals 3RA68 22-0AC • Spring-type terminals 3RA68 22-0AC 0.527 Three-socket expansion modules With screw or spring-type terminals and integrated PE bar with 3 sockets for 3 direct-on-line starters or 1 direct-on-line starter and 1 reversing starter Expansion plug and 2 connecting plates are included in the scope of supply. Screw terminals 3RA68 23-0AB • Screw terminals 3RA68 23-0AB 0.717 3RA68 23-0AC 0.750 Spring-type terminals 6 • Spring-type terminals 3RA68 23-0AC Siemens Industry, Inc. Industrial Controls Catalog Illustrations are approximate 4/19 Product Category: IEC SIRIUS Innovations Supplement 2012 6/55 Compact Combination Starters For Operation in the Control Cabinet SIRIUS SIRIUS3RA6 3RA6Compact CompactStarters Starters SIRIUS Infeed 3RA6 Infeed systems systems for for 3RA6 Accessories Version Order No. Weight approx. kg Accessories for 3RA6 infeed systems PE infeeds 4-2 AWG Screw terminals 3RA68 60-6AB • Screw terminals 0.060 3RA68 60-6AB Spring-type terminals 3RA68 60-5AC • Spring-type terminals 3RA68 60-5AC PE tap-offs 10-8 AWG 0.070 Screw terminals 3RA68 70-4AB • Screw terminals 0.019 3RA68 70-4AB Spring-type terminals 3RA68 70-3AC 0.017 PE expansion plugs 3RA68 90-0EA 0.008 Expansion plugs between 2 expansion modules Is included in the scope of supply of the expansion modules. 3RA68 90-1AB 0.029 Expansion plugs for SIRIUS 3RV19/29 infeed system Connects infeed system for 3RA6 to 3RV19 and 3RV29 infeed systems 3RA68 90-1AA 0.079 6 • Spring-type terminals 3RA68 70-3AC Expansion plugs 3RA68 90-0EA 3RA68 90-1AB 3RA68 90-1AA 4/20 6/56 Product Category: IEC SIRIUS Innovations Supplement 2012 Siemens Industry, Inc. Industrial Controls Catalog Illustrations are approximate ForCompact OperationCombination in the ControlStarters Cabinet SIRIUS SIRIUS3RA6 3RA6Compact CompactStarters Starters SIRIUS Infeed systems for for 3RA6 3RA6 Infeed systems Version Order No. kg Accessories for 3RA6 infeed systems (Continued) Adapters 45 mm 3RA68 90-0BA Weight approx. For SIRIUS 3RV1 motor starter protectors size S0 Screw terminals • Screw terminals 3RA68 90-0BA Terminal blocks For integration of single-phase, two-phase and three-phase external components • Spring-type terminals 0.152 Spring-type terminals 3RV19 17-5D 0.050 3RV19 17-5D Tools for opening spring-type terminals by hand Screwdrivers Spring-type terminals Length approx. 200 mm, 3.0 mm x 0.5 mm, titanium gray/black, partially insulated 3RA29 08-1A 0.045 6 3RA29 08-1A For all SIRIUS devices with spring-type terminals Siemens Industry, Inc. Industrial Controls Catalog Illustrations are approximate 4/21 Product Category: IEC SIRIUS Innovations Supplement 2012 6/57 Compact Combination Starters For Operation in the Control Cabinet SIRIUS 3RA6 Compact Starters SIRIUS SIRIUS 3RA6 Compact Starters General data General data More information Type Size Number of poles 3RA61 S0 3 General technical specifications mm mm 45 x 170 x 165 90 x 170 x 165 45 x 170 x 165 90 x 170 x 165 45 x 191 x 165 90 x 191 x 165 45 x 191 x 165 90 x 191 x 165 kg 1.4 Permissible mounting positions 2.3 -2.4 1.3 2.3 No restrictions, preferably vertical or horizontal installation A A A A A 0.4 1.25 4 12 32 Permissible ambient temperature • During operation Acc. to IEC/EN 60721-3-3 • For installation in SIRIUS infeed system for 3RA6 • During storage IEC/EN 60732-3-1 • During transport IEC/EN 60721-3-2 °C °C °C °C -20 ... +60, with derating up to +70 -20 ... +40 -55 ... +80 -55 ... +80 Permissible rated current of the compact starter, when several compact starters are mounted sideby-side on a vertical standard mounting rail or in the 3RA6 infeed system • For a control cabinet inside temperature of +40 °C • For a control cabinet inside temperature of +60 °C % % 100 80 Relative air humidity % 10 ... 90 m Up to 2 000 above sea level without restriction Hz 50/60 V 690 kV 6 Rated frequency Rated insulation voltage Ui (pollution degree 3) Rated impulse withstand voltage Uimp Trip class (CLASS) Acc. to IEC 60947-4-1, EN 60947-4-1 Rated short-circuit current Iq at AC 50/60 Hz 480 V Acc. to IEC 60947-4-1, EN 60947-4-1 10/20 kA 30 (up to 12 A units) 15 (8 ... 32 A unit) Types of coordination Acc. to IEC 60947-6-2, EN 60947-6-2 Power loss Pv max of all main current paths Dependent on the rated current Ie (upper setting range) 0.4 A 1.25 A 4A 12 A 32 A mW mW W W W 10 100 1 1.8 5.4 Max. switching frequency AC-41 AC-43 AC-44 1/h 1/h 1/h 750 250 15 W W 2.7 2.95 W W 3.4 3.8 At 24 V • 0.1 ... 12 A • 8 ... 32 A At 110 ... 240 V • 0.1 ... 12 A • 8 ... 32 A 6 0.1 ... 0.4 A 0.32 ... 1.25 A 1 ... 4 A 3 ... 12 A 8 ... 32 A Installation altitude Drive losses Active power 3RA65 D H W Weight Max. rated current Ie in the respective setting range 3RA64 IEC/EN 60947-6-2 Device standard Mounting dimensions (WxHxD) • Screw terminals • Spring-type terminals 3RA62 Continuous Overload function Ratio of lower to upper current mark 1:4 Shock resistance (sine-wave pulse) a = 60 m/s² = 6 g with 10 ms; for every 3 shocks in all axes f = 4 ... 5.8 Hz; d =15 mm; f = 5.8 ... 500 Hz; a = 20 m/s2;10 cycles Vibratory load Degree of protection Touch protection Isolating features of the compact starter Main and EMERGENCY-STOP switch characteristics of the compact starter and accessories 4/22 Acc. to IEC 60947-1 IP20 Acc. to IEC/EN 61140 Finger-safe Acc. to IEC/EN 60947-3 Yes Acc. to IEC/EN 60204 Yes Product Category: IEC SIRIUS Innovations Supplement 2012 Siemens Industry, Inc. Industrial Controls Catalog 6/35 Compact Combination Starters For Operation in the Control Cabinet SIRIUS SIRIUS 3RA6 Compact Starters SIRIUS 3RA6 Compact Starters General data General data Type Size Number of poles 3RA61 S0 3 General technical specifications (continued) Protective separation V V Up to 400 Up to 250 Auxiliary circuit to auxiliary circuit • Horizontal standard mounting rail • Other mounting position V V Up to 400 Up to 250 V Up to 400 Main circuit to auxiliary circuit • Any mounting position Conductor-related interference • In the main circuit • In the auxiliary circuit Conductor-related interference • In the main circuit - Conductor - Ground - Conductor - Conductor • In the auxiliary circuit - Conductor - Ground - Conductor - Conductor 3RA64 3RA65 Acc. to IEC 60947-2 Control circuit to auxiliary circuit • Horizontal standard mounting rail • Other mounting position EMC interference immunity 3RA62 Acc. to IEC/EN 60947-1 BURST acc. to IEC/EN 61000-4-4 Corresponds to degree of severity 3 kV kV 4 3 4 2 kV kV 4 2 2 1 kV kV 2 1 0.51) 0.51) SURGE acc. to IEC/EN 61000-4-5 Auxiliary switches • Integrated - Position of the main contacts - Overload/short-circuit signal • Expandable - Position of the main contacts 1 NO + 1 NC 1 CO/1 NO Surge suppressors Integrated (Varistor) 2 NO 1 NO + 1 NC 2 NO 2 NO, 2 NC, 1 NO + 1 NC Pollution degree 3 Depth from standard mounting rail mm 160 Control voltage V V 24 AC/DC 110 ... 240 AC/DC Hz 50/60 ( 5 %) 6 Electromagnetic operating mechanism Frequency At AC Primary operating range No-load switching frequency Make-time Break-time 1) 0.7 ... 1.25 Us 24 DC -0.85 ... 1.2 Us 1/h 3 600 ms max. 70 Max. 70 + IO-Link communication ms max. 120 Max. 120 + IO-Link communication To maintain maximum interference immunity in a harsh electromagnetic environment, additional overvoltage protection should be provided in the control supply current circuit. A suitable choice is for example the Dehn Blitzductor BVT AD 24 V, Art. No. 918 402 or an equivalent protective element. Manufacturer: DEHN+SÖHNE GmbH+Co. KG, Hans-Dehn-Straße. 1, Postfach 1640, D-92306 Neumarkt Siemens Industry, Inc. Industrial Controls Catalog 6/36 4/23 SIRIUS Innovations Supplement 2012 Compact Combination Starters For Operation in the Control Cabinet SIRIUS 3RA6 Compact Starters SIRIUS SIRIUS 3RA6 Compact Starters General data General data Type Rated control supply voltage Inrush peak current Hold current Closed Operating times, typical • On • Off Inrush peak current Hold current Closed Operating times, typical • On • Off V Inrush peak current Hold current Closed Rated operational current 32 A 12 A 24 DC 24 AC 24 DC A 0.59 0.47 0.59 0.47 A 0.13 0.12 0.17 0.14 W 2.8 2.9 3.5 3.1 ms ms <160 <35 <140 <35 <160 <30 <140 <30 3RA61 20-.@E3., 3RA62 50-.@E3. @ = A, B, C or D V Rated operational current 12 A 3RA61 20-.EE3., 3RA62 50-.EE3. Rated operational current 32 A 110 AC 240 AC 110 DC 240 DC 110 AC 240 AC 110 DC 240 DC A 0.24 0.40 0.17 0.29 0.24 0.40 0.17 0.29 A 0.06 0.08 0.03 0.02 0.06 0.07 0.04 0.03 W 3.8 6 3.1 5.1 3.7 5.2 3.4 5.8 ms ms <160 <50 <140 <80 <150 <50 <140 <70 <160 <40 <140 <60 <150 <40 <140 <60 3RA64 00-.@B4., 3RA65 00-.@B4. 3RA64 00-.EB4., 3RA65 00-.EB4. Rated operational current Rated operational current 32 A @ = A, B, C or D V 24 DC 12A 24 DC A 0.39 0.53 A 0.13 0.15 W 2.9 3.4 ms ms <140 <35 <140 <30 6 Operating times, typical1) • On • Off Rated operational current 24 AC Type Rated control supply voltage 3RA61 20-.EB3., 3RA62 50-.EB3. @ = A, B, C or D Type Rated control supply voltage 3RA61 20-.@B3., 3RA62 50-.@B3. 4/24 Product Category: IEC SIRIUS Innovations Supplement 2012 Siemens Industry, Inc. Industrial Controls Catalog 6/37 Compact Combination Starters For Operation in the Control Cabinet SIRIUS 3RA6 Compact Starters SIRIUS 3RA6 Compact Starters General data General data Type Size Number of poles 3RA61 S0 3 Electromagnetic operating mechanism (continued) Switching capacity at 480 V kA 30 (up to 12 A) 15 (8 ... 32 A) Switching capacity at 600 V kA 10 (up to 12 A) 5 (8 ... 32 A) Line protection At 10 kA At 50 kA Shock resistance • Breaker mechanism OFF • Breaker mechanism ON g g Normal switching duty 3RA65 25 15 12 x In 10 x In Breaking capacity Endurance in operating cycles • Electrical endurance 3RA64 AWG 14 AWG 12 Making capacity Switching capacity dependent on rated current 3RA62 Up to 12 A Up to 32 A HP HP At Ie = 0.9 x In and 400 V 7 1/2 20 3 ... 10 000 000 2 x 3 000 000 3 ... 10 000 000 2 x 1 500 000 Control circuit Rated operational voltage • External auxiliary switch block • Internal auxiliary switch • Short-circuit signaling switch • Overload signaling switch Switching capacity • External auxiliary switch block 6 • Internal auxiliary switch • Signaling switch Siemens Industry, Inc. Industrial Controls Catalog 6/38 AC-15 • At Ue = 230 V • At Ue = 400 V • At Ue = 289/500 V • At Ue = 400/690 V DC-13 • At Ue = 24 V • At Ue = 60 V • At Ue = 125 V • At Ue = 250 V AC-15 • At Ue = 230 V • At Ue = 400 V • At Ue = 289/500 V • At Ue = 400/690 V DC-13 • At Ue = 24 V • At Ue = 60 V • At Ue = 125 V • At Ue = 250 V • At Ue = 480 V AC-15 • At Ue = 230 V • At Ue = 400 V DC-13 • At Ue = 24 V • At Ue = 250 V V V V V 400/690 400/690 400 400 A A A A 6 3 2 1 A A A A 6 0.9 0.55 0.27 A A A A 6 3 2 1 A A A A A 10 2 1 0.27 0.1 A A 3 1 A A 2 0.11 4/25 SIRIUS Innovations Supplement 2012 Compact Combination Starters For Operation in the Control Cabinet SIRIUS 3RA6 Compact Starters SIRIUS SIRIUS 3RA6 Compact Starters General data General data Type Size Number of poles 3RA61 S0 3 External auxiliary switch block, internal auxiliary switch Endurance in operating cycles • Mechanical endurance • Electrical endurance 10 000 000 AC-15, 230 V • At 6 A • At 3 A • At 1 A • At 0.3 A DC-13, 24 V • At 6 A • At 3 A • At 0.5 A • At 0.2 A DC-13, 110 V • At 1 A • At 0.55 A • At 0.3 A • At 0.1 A • At 0.04 A DC-13, 220 V • At 0.3 A • At 0.1 A • At 0.05 A • At 0.018 A Contact stability Short-circuit protection • Short-circuit current IK 1.1 kA • Short-circuit current IK < 400 A 3RA62 3RA64 3RA65 3 000 000 200 000 500 000 2 000 000 10 000 000 30 0 00 100 000 2 000 000 10 000 000 40 000 100 000 300 000 2 000 000 10 000 000 110 000 650 000 2 000 000 10 000 000 At 17 V and 5 mA Oper- 1 incorrect switching operation per 100 000 000 ating cycles Fuse links operational class gG - NEOZED Type 5SE - DIAZED Type 5SB - LV HRC Type 3NA Miniature circuit breaker up to 230 V with C characteristic A 10 A 10 Signaling switches Endurance in operating cycles • Mechanical endurance • Electrical endurance AC-15 At 230 V and 3 A Contact stability At 17 V and 5 mA Oper- 1 incorrect switching operation per 100 000 000 ating cycles Fuse links operational class gG - NEOZED Type 5SE - DIAZED Type 5SB - LV HRC Type 3NA Miniature circuit breaker up to 230 V with C characteristic A 6 A 6 Fuse links operational class gG - NEOZED Type 5SE - DIAZED Type 5SB - LV HRC Type 3NA A 4 Short-circuit protection • Short-circuit current IK 1.1 kA • Short-circuit current IK < 400 A Overload (short-circuit current IK 4/26 1.1 kA) Product Category: IEC SIRIUS Innovations Supplement 2012 6 20 000 6 050 Siemens Industry, Inc. Industrial Controls Catalog 6/39 Compact Combination Starters SIRIUS 3RA6 Compact Starters SIRIUS 3RA6 up to 32 A Technical data Connection type Screw connection 12 A Max. rated current Imax 32 A Spring-type connection 12 A 32 A Conductor cross-sections of main circuit terminals Posidrive size 2 (3.5 x 0.5) mm, 8WA2 803 NM 2 ... 2.5 -- mm2 mm2 2 mm 2 x (1.5 ... 2.5) 2 x (2.5 ... 6) Max. 1 x 10 2 x (2.5 ... 6) Max. 1 x 10 2 x (1.5 ... 6) Max. 1 x 10 2 x (2.5 ... 6) Max. 1 x 10 • Finely stranded without ferrule mm2 -- -- 2 x (1.5 ... 6) 2 x (2.5 ... 6) • Finely stranded with ferrule mm2 2 mm 2 x (1.5 ... 2.5) 2 x (2.5 ... 6) 2 x (2.5 ... 6) 2 x (1.5 ... 6) 2 x (2.5 ... 6) AWG AWG AWG 2 x (16 ...14) 2 x (14 ...10) 1x8 2 x (14 ...10) 1x8 2 x (16 ...10) 1x8 2 x (14 ...10) 1x8 Tools Prescribed tightening torque Minimum/maximum conductor cross-sections • Solid • AWG cables Connection type Screw connection Spring-type connection Conductor cross-sections of control circuit terminals Posidrive size 2 (3.0 x 0.5) mm, DIN ISO 2380-1A NM 0.8 ... 1.2 -- mm² mm² 1 x (0.5 ... 4) 2 x (0.5 ... 2.5) 2 x (0.25 ... 1.5) • Finely stranded without ferrule mm² -- 2 x (0.25 ... 1.5) • Finely stranded with ferrule mm² mm² 1 x (0.5 ... 2.5) 2 x (0.5 ... 1.5) 2 x (0.25 ... 1.5) • AWG cables AWG 2 x (20 ... 14) 2 x (24 ... 16) Order No. 3RA69 1.-1A 3RA69 1.-2A Tools Posidrive size 2 (2.5 x 0.4) mm, 8WA2 807 NM 0.8 ... 1.2 -- mm² mm² mm² 2 x (0.5 ...1.5) 2 x (0.75 ... 2.5) 2 x (1 ... 4) 2 x (0.25 ... 2.5) • Finely stranded without ferrule mm² -- 2 x (0.25 ... 2.5) • Finely stranded with ferrule mm² mm² 2 x (0.5 ... 1.5) 2 x (0.75 ... 2.5) 2 x (0.25 ... 1.5) • AWG cables AWG AWG AWG 2 x (20 ... 16) 2 x (18 ... 14) 1 x 12 2 x (24 ... 14) Tools Prescribed tightening torque Minimum/maximum conductor cross-sections • S olid Conductor cross-sections of the auxiliary switch for compact starters Prescribed tightening torque Conductor cross-sections • S olid Siemens Industry, Inc. Industrial Controls Catalog 4/27 Compact Combination Starters SIRIUS SIRIUS 3RA6 Compact Starters 3RA6 up to 32A Technical data Order No. 3RA6970-3A, 3RA6970-3B, 3RA6970-3C, 3RA6970-3D, 3RA6970-3E General data of the AS-i add-on module Permissible ambient temperature • Storage • Transport Acc. to IEC/EN 60721-3-1 Acc. to IEC/EN 60721-3-2 °C °C -25 ... +70 -25 ... +70 Degree of protection Acc. to IEC/EN 60947-1 EMC interference immunity Acc. to EN 50295 IP20 Conductor-related interference BURST acc. to IEC/EN 61000-4-4 kV 1/2 Electrostatic discharge Acc. to IEC/EN 61000-4-2 kV 6/8 Field-related interference Acc. to IEC/EN 61000-4-3 V/m 10 (80 MHz ... 2.7 GHz) Maximum pick-up current mA 400 Maximum hold current mA 200 Power consumption, max. mA 30 IO code 7 ID code A ID2 code E Order No. 3RA6970-3B, 3RA6970-3C, 3RA6970-3D, 3RA6970-3E Connection type Screw connection Conductor cross-sections of the AS-i add-on module Posidrive size 1 Tools Prescribed tightening torque Conductor cross-sections • Solid • Finely stranded with ferrule • AWG cables 4/28 NM 0.5 ... 0.6 mm² mm² mm² mm² AWG 1 x (0.5 ... 2.5) 2 x (0.5 ... 1.0) 1 x (0.5 ... 2.5) 2 x (0.5 ... 1.0) 1 x (20 ... 12) Siemens Industry, Inc. Industrial Controls Catalog Compact Combination Starters SIRIUS 3RA6 Compact Starters SIRIUS Infeed systems for 3RA6 up to 100 A Technical data Type 3RA6. General data Max. rated operational current • Infeed with screw connection 0-2/0 AWG • Infeed with screw connection 4-2 AWG • Infeed with spring-type connection 10-3 AWG • Expansion plug A A A A 100 63 63 63 Permissible ambient temperature • During operation - Permissible rated current at control cabinet inside temperature: +40 °C +60 °C • During storage/transport °C % % °C -20 ... +60 (over +40 current reduction is required) 100 80 -55 ... +80 Relative air humidity % 10 ... 90 Installation altitude m Up to 2000 above sea level without restriction Rated operational voltage Ue V 690 AC Rated frequency Hz 50/60 Shock resistance a = 60 m/s² = 6g with 10 ms; for every 3 shocks in all axes Vibratory load f =1 ... 6 Hz; d =15 mm 10 cycles f =150 Hz; a = 2 g Degree of protection Acc. to IEC 60947-1 IP20 (IP 00 terminal compartment) Touch protection Acc. to EN 50274 Finger-safe 3 Degree of pollution Recommendation for upstream short-circuit protection device 3RV1041-4JA10 3RV1041-4MA10 Short-circuit protection for infeed with screw connection 4-2 AWG and infeed with screw connection 0-2/0 AWG Short-circuit protection for infeed with springtype connection • Conductor cross-section 12 AWG • Conductor cross-section 10 AWG • Conductor cross-section 8 AWG • Conductor cross-section 6-4 AWG Id,max I²t Id,max I²t Id,max I²t Id,max I²t Id,max I²t kA kA²s kA kA²s kA kA²s kA kA²s kA kA²s < 21 530 LV HRC gL/gG 3NA3, 315 A < 9.5 85 < 12.5 140 < 15 180 < 19 440 1) Conductor cross-section 16 AWG Conductor cross-section 14 AWG Conductor cross-section 12 AWG Conductor cross-section 10 AWG Id,max Id,max Id,max Id,max kA kA kA kA 3RV1031-4EA10 3RV1031-4HA10 3RV1041-4JA10 Recommendation for upstream short-circuit protection device 5SY... Short-circuit protection for terminal block • • • • Recommendation for upstream short-circuit protection device 3RV2021-4DA10 7.5 9.5 9.5 12.5 1) To prevent the possibility of short-circuits, the cables on the terminal block must be installed so that they are short-circuit resistant according to EN 60439-1 Section 7.5.5.1.2. Type 3RV29. Spring-type connection Connection type Conductor cross-sections of terminal block Order No. Conductor cross-sections • Solid • Finely stranded with ferrule • Finely stranded without ferrule • AWG cables, solid or stranded Siemens Industry, Inc. Industrial Controls Catalog 3RV29 17-5D mm2 mm2 mm2 AWG 1.5 ... 6 1.5 ... 4 1.5 ... 6 15 ... 10 4/29 Compact Combination Starters SIRIUS SIRIUS 3RA6 Compact Starters Infeed systems for 3RA6 up to 100 A Technical data Type 3RA6. Connection type Screw connection Conductor cross-sections of infeed with screw connection 16-2 AWG (L1, L2, L3)1) and PE infeed 2 AWG2) Order No. 3RA68 12-8AB, 3RA68 12-8AC, 3RA68 60-6AB Posidrive size 2 Tools Specified tightening torque NM 3 ... 4.5 Conductor cross-sections • Solid • Stranded • Finely stranded with ferrule • Finely stranded without ferrule • AWG cables mm2 mm2 mm2 mm2 AWG 2.6 ... 16 2.5 ... 35 2.5 ... 25 2.5 ... 25 12 ... 2 Connection type 2.6 ... 16 2.5 ... 35 2.5 ... 25 2.5 ... 25 12 ... 2 max. 2 x 16 max. 2 x 25 max. 2 x 16 max. 2 x 16 max. 2 x (16 ... 2) Screw connection Conductor cross-sections of infeed with screw connection 10-2/0 AWG (L1, L2, L3)1) Order No. 3RA68 13-8AB, 3RA68 13-8AC Tools SW 4 Specified tightening torque NM 6 ... 8 Conductor cross-sections • Solid • Stranded • Finely stranded with ferrule • Finely stranded without ferrule • AWG cables mm2 mm2 mm2 mm2 AWG 2.5 ... 16 4 ... 70 2.5 ... 35 4 ... 50 10 ... 2/0 Order No. Conductor cross-sections • Solid • Stranded • Finely stranded with ferrule • Finely stranded without ferrule • AWG cables max. 2 x 16 max. 2 x 50 max. 2 x 35 max. 2 x 35 max. 2 x (10 ... 1/0) Spring-type connection Connection type Conductor cross-sections of infeed with spring-type connection 10-3 AWG (L1, L2, L3)1) and PE infeed 3 AWG Tools 2.5 ... 16 10 ... 70 2.5 ... 50 10 ... 50 10 ... 2/0 3RA68 30-5AC, 3RA68 60-5AC 8WA2 806 mm mm2 mm2 mm2 mm2 AWG 5.5 x 0.8 4 ... 16 4 ... 35 4 ... 25 6 ... 25 10 ... 3 Connection type Screw connection Spring-type connection (T1, T2, T3)2), Conductor cross-sections of infeed with screw connection 4-2 AWG infeed with screw connection 0-2/0 AWG (T1, T2, T3)2) 2-socket and 3-socket expansion modules (T1, T2, T3)2) and PE tap-off 10-8 AWG Order No. Tools 3RA68 12-8AB, 3RA68 13-8AB, 3RA68 22-0AB, 3RA68 23-0AB, 3RA68 70-4AB 3RA68 12-8AC, 3RA68 13-8AC, 3RA68 22-0AC, 3RA68 23-0AC, 3RA68 70-3AC Posidrive size 2 (3.5 x 0.5) mm, 8WA2 803 Specified tightening torque NM 2 ... 2.5 Maximum rated current A 12 32 12 32 mm2 mm2 mm2 2 x (1 ... 2.5) 2 x (2.5 ... 6) max. 1 x 10 2 x (2.5 ... 6) 2 x (1.5 ... 6) 2 x (2.5 ... 6) max. 1 x 10 max. 1 x 10 max. 1 x 10 Conductor cross-sections • Solid 2 -- • Finely stranded with ferrule mm -- -- 2 x (1.5 ... 6) 2 x (2.5 ... 6) • Finely stranded without ferrule mm2 mm2 2 x (1 ... 2.5) 2 x (2.5 ... 6) 2 x (2.5 ... 6) 2 x (1.5 ... 6) 2 x (2.5 ... 6) • AWG cables AWG AWG AWG 2 x (16 ... 14) 2 x (14 ... 10) 1x8 2 x (14 ... 10) 2 x (16 ... 10) 2 x (14 ... 10) 1x8 1x8 1x8 1) L1, L2, L3 main conductors on input side. 4/30 2) T1, T2, T3 main conductors on output side. Siemens Industry, Inc. Industrial Controls Catalog Compact Combination Starters SIRIUS 3RA6 Compact Starters SIRIUS 3RA6 up to 32 A Dimensional drawings Direct-on-line starters and reversing starters 45 25 10 25 90 165 1701) 1912) 185 24 5 NSB0_01884 30 1) Screw connection 2) Spring-loaded connection Schematics 3RA61 direct-on-line starters 3RA6911-.A 33 43 1L1 3L2 5L3 9896 95 34 44 3RA6912-.A RLT 13 21 31 41 14 22 32 42 Q1 >> >> >> 77 3RA6913-.A 31 43 78 A1 A2 32 44 NSB0_01924 2T1 4T2 6T3 Schematic for 3RA61 direct-on-line starters (main circuit) Siemens Industry, Inc. Industrial Controls Catalog 4/31 Compact Combination Starters SIRIUS SIRIUS 3RA6 Compact Starters 3RA6 up to 32 A Dimensional drawings 3RA62 reversing starters 1L1 3L2 5L3 9896 95 3RA6911-.A 3RA6911-.A 23 33 53 63 24 34 54 64 RLT RLT 3RA6912-.A 21 31 3RA6912-.A 13 Q1 22 32 43 51 61 44 52 62 Q2 14 3RA6913-.A 3RA6913-.A 21 33 51 63 77 >> >> >> 22 34 52 64 78 A2 B1 A1 B2 NSB0_01925 2T1 4T2 6T3 Schematic for 3RA62 reversing starters (main circuit) 4/32 Siemens Industry, Inc. Industrial Controls Catalog Compact Combination Starters SIRIUS 3RA6 Compact Starters SIRIUS Infeed systems for 3RA6 up to 100 A ■ Dimensional drawings 135 155 Ø4 79 28 57 225 197 148 ,5 NSB0_01926 111 140 58 70 61 45 102 5 31 65 176 135 144 76 79 38 5 28 45 61 57 225 197 148 111 140 58 45 NSB0_01927 Infeed with screw connection 0-2/0 AWG on left with fixed 3-socket expansion module with outgoing screw terminals 31 65 Infeed with screw connection 4-2 AWG on left with fixed 3-socket expansion module with outgoing screw terminals Siemens Industry, Inc. Industrial Controls Catalog 4/33 Compact Combination Starters SIRIUS SIRIUS 3RA6 Compact Starters Infeed systems for 3RA6 up to 100 A 155 111 Ø4 79 19 45 60 57 227 208 148 140 ,5 NSB0_01928 135 58 70 102 5 67 135 176 144 79 Ø4 19 57 45 76 60 38 208 148 ,5 227 111 140 58 45 NSB0_01929 Infeed with screw connection 0-2/0 AWG on left with fixed 3-socket expansion module with outgoing spring-type terminals 5 67 Infeed with screw connection 4-2 AWG on left with fixed 3-socket expansion module with outgoing spring-type terminals NSB0_01930 154 79 97 27 5 86 Infeed with spring-type terminals 4/34 Siemens Industry, Inc. Industrial Controls Catalog Compact Combination Starters SIRIUS 3RA6 Compact Starters SIRIUS Infeed systems for 3RA6 up to 100 A 90 79 58 NSB0_01931 97 58 135 Ø4 197 197 148 ,5 148 ,5 197 Ø4 45 5 65 3-socket expansion module and 2-socket expansion module with outgoing screw te rminals 90 197 208 208 ,5 148 Ø4 148 ,5 79 58 Ø4 NSB0_01932 97 58 135 67 10 5 45 > 10 > 30 NSB0_01933 > 30 3-socket expansion module and 2-socket expansion module with outgoing spring-type te rminals > 10 Minimum clearances to adjacent components when usi ng infeed system for 3RA6 Siemens Industry, Inc. Industrial Controls Catalog 4/35 Combination Starters &Starters Starters&for Group Combination Starters forInstallation Group Installation SIRIUS SIRIUS 3RA2 Motor Starters 3RA1 / 3RA2 Starters Non-Reversing, AC Coil up to 22 A 3RA21 direct-on-line starters 50/60 Hz 110/120 V AC Selection and ordering data Direct-on-line starting Size 3RA21 20 3RA21 10 Combination Starter, UL508 Type F All size S00 and S0 devices can be applied as Combination Starters with the addition of either of these line side connectors: 3RV29 28-1H, 3RV29 25-5EB or 3RV29 28-1K. 3RA21 20 UL Data 2) Single-phase Three-phase HP ratings HP ratings 115 V 230 V 200 V 230 V 460 V 575 V FLA setting range inverseSCCR time delayed overload at 480 V release kA S0 -------------1/10 1/8 1/6 1/4 1/3 1/2 1/2 1 1/6 1/4 1/3 1/2 1/2 1 1 1/2 1 1/2 2 2 ----------1/10 1/8 1/6 1/4 1/3 1/2 1/2 1 1 1/2 2 2 1/2 1/2 1 1 1/2 2 2 3 3 3 5 ------------1/2 1/2 3/4 1 1 2 2 3 3 1 1 2 2 3 3 5 5 5 7 1/2 ------------1/2 3/4 3/4 1 1 1/2 2 3 3 5 1 1 1/2 2 3 3 5 5 7 1/2 7 1/2 10 ---------1/2 3/4 3/4 1 1 1/2 2 3 3 5 5 7 1/2 10 3 3 5 5 7 1/2 10 10 15 15 20 --------1/2 1/2 3/4 1 1 1/2 2 3 3 5 5 7 1/2 10 -3 5 5 7 1/2 10 ------ 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 50 50 50 Motor starter protector + Contactor + Link module + Busbar adapter3) Assembled starter Weight approx. Screw terminals Order No. A kg Selection depends on motor full load amps S00 Consisting of the following single devices 0.11…0.16 0.14…0.2 0.18…0.25 0.22…0.32 0.28…0.4 0.35…0.5 0.45…0.63 0.55…0.8 0.7… 1 0.9… 1.25 1.1… 1.6 1.4… 2 1.8… 2.5 2.2… 3.2 2.8… 4 3.5… 5 4.5… 6.3 5.5… 8 7… 10 9… 12 11… 16 3.5… 5 4.5… 6.3 5.5… 8 7… 10 9… 12.5 11… 16 14… 20 17… 22 20… 25 27… 32 3RV20 11-0BA10 11-0BA10 11-0CA10 11-0DA10 11-0EA10 11-0FA10 11-0GA10 11-0HA10 11-0JA10 11-0KA10 11-1AA10 11-1BA10 11-1CA10 11-1DA10 11-1EA10 11-1FA10 11-1GA10 11-1HA10 11-1JA10 11-1KA10 11-4AA10 11-1FA10 11-1GA10 11-1HA10 11-1JA10 11-1KA10 21-4AA10 21-4BA10 21-4CA10 21-4DA10 21-4EA10 3RT20 15-1AK61 3RA 1921-1DA00 + 8US12515DS10 16-1AK61 17-1AK61 18-1AK61 24-1AK60 2921-1AA00 + 8US12515NT10 26-1AK60 27-1AK60 3RA21 10-0A@15-1AK6 3RA21 10-0B@15-1AK6 3RA21 10-0C@15-1AK6 3RA21 10-0D@15-1AK6 3RA21 10-0E@15-1AK6 3RA21 10-0F@15-1AK6 3RA21 10-0G@15-1AK6 3RA21 10-0H@15-1AK6 3RA21 10-0J@15-1AK6 3RA21 10-0K@15-1AK6 3RA21 10-1A@15-1AK6 3RA21 10-1B@15-1AK6 3RA21 10-1C@15-1AK6 3RA21 10-1D@15-1AK6 3RA21 10-1E@15-1AK6 3RA21 10-1F@15-1AK6 3RA21 10-1G@15-1AK6 3RA21 10-1H@16-1AK6 3RA21 10-1J@16-1AK6 3RA21 10-1K@17-1AK6 3RA21 10-4A@18-1AK6 3RA21 20-1F@24-0AK6 3RA21 20-1G@24-0AK6 3RA21 20-1H@24-0AK6 3RA21 20-1J@24-0AK6 3RA21 20-1K@24-0AK6 3RA21 20-4A@26-0AK6 3RA21 20-4B@26-0AK6 3RA21 20-4C@27-0AK6 3RA21 20-4D@27-0AK6 3RA21 20-4E@27-0AK6 Order No. supplement for mounting onto standard mounting rail or screw fixing Screw fixing with 1 push-in lug each per motor starter is possible (see "Accessories for Direct-On-Line and Reversing Starters"). Order No. supplement for mounting onto Fastbus 60mm busbar system With busbar adapter A for size S00 for size S0 1 2 D D 0.575 0.575 0.575 0.575 0.575 0.575 0.575 0.575 0.575 0.575 0.575 0.575 0.575 0.575 0.575 0.575 0.575 0.575 0.575 0.575 0.575 0.761 0.761 0.761 0.761 0.761 0.761 0.761 0.761 0.761 0.761 6 3RA21 10 Rated control supply voltage 50/60 Hz 110/120 V AC With screw connections • The motor starter protector and contactor are mechanically and electrically connected by means of the link module. • Auxiliary switches1) on the motor starter protector and the contactor can be easily fitted due to the modular system. • Integrated auxiliary switches: - Contactor size S00: 1 NO; - Contactor size S0: 1 NO + 1 NC Add. weight 0.263 0.295 1) For auxiliary switches see Accessories page 4/44. 2) Selection depends on the motor full load amps. HP ratings for reference only. 3) Used only for mounting starter on 8US Fast Bus busbar systems. 4/36 Illustrations are approximate Product Category: IEC SIRIUS Innovations Supplement 2012 Siemens Industry, Inc. Industrial Controls Catalog 6/13 SIRIUS Combination Starters & Starters for Group Installation 3RA1 / 3RA2 Non-Reversing, AC Coil up to 100 A Selection and ordering data 3RA11 30 Direct-on-line starting For 35 mm standard mounting rail or screw mounting All starters are suitable for use in Group Installation applications per NEC 430-53 (c) Motor starter protector and contactor are linked electrically and mechanically by means of a link module and adapter plate Auxiliary switches 1) can be added easily to the MSP and the contactor Combination Starter, UL508 Type F Size S2 devices can be applied as Combination Starters Size S3 devices can be applied as Combination Starters with the addition of a 3RT1946-4GA07 line side terminal kit SCCR: 65kA at 480 V FLA setting Starter range Inverse-time Order No. delayed overload release Size Consisting of the following individual devices Motor starter protector + Contactor + Single-Phase HP Three-Phase2) HP ratings Ratings 115V 230V 200V 230V 460V 575V A Link module + Adapter for standard mounting rail3) 110VAC 50Hz / 120VAC 60 Hz 1 1 1/2 2 2 3 3 3 3 5 5 7 1/2 10 10 3 5 5 3 5 7 1/2 5 7 1/2 10 5 10 10 7 1/2 10 15 7 1/2 15 15 10 15 15 7 1/2 15 15 10 15 20 15 20 25 15 25 25 20 30 30 20 30 30 10 15 20 25 30 30 40 30 40 50 60 75 75 15 20 25 30 40 40 50 40 50 60 75 – 3 5 5 3 5 7 1/2 5 7 1/2 10 5 10 10 7 1/2 10 15 7 1/2 15 15 10 15 15 7 1/2 15 15 10 15 20 15 20 25 15 25 25 20 30 30 20 30 30 10 15 20 25 30 30 40 30 40 50 60 75 75 15 20 25 30 40 40 50 40 50 60 75 – 11… 16 14… 20 18… 25 22… 32 28… 40 36… 45 40… 50 28 ... 40 36 ... 50 45 ... 63 57... 75 70 ... 90 80 ...100 3RA11 3@-4AB33-@AK6 3RA11 3@-4BB33-@AK6 3RA11 3@-4DB33-@AK6 3RA11 3@-4EB34-@AK6 3RA11 3@-4FB35-@AK6 3RA11 3@-4GB36-@AK6 3RA11 3@-4HB36-@AK6 3RA11 4@-4FB44-@AK6 3RA11 4@-4HB44-@AK6 3RA11 4@-4JB44-@AK6 3RA11 4@-4KB45-@AK6 3RA11 4@-4LB46-@AK6 3RA11 4@-4MB46-@AK6 11… 16 14… 20 18… 25 22… 32 28… 40 36… 45 40… 50 28 ... 40 36 ... 50 45 ... 63 57... 75 70 ... 90 80 ...100 3RA11 3 -4AB33-@BB4 3RA11 3@-4BB33-@BB4 3RA11 3@-4DB33-@BB4 3RA11 3@-4EB34-@BB4 3RA11 3@-4FB35-@BB4 3RA11 3@-4GB36-@BB4 3RA11 3@-4HB36-@BB4 3RA11 4@-4FB44-@BB4 3RA11 4@-4HB44-@BB4 3RA11 4@-4JB44-@BB4 3RA11 4@-4KB45-@BB4 3RA11 4@-4LB46-@BB4 3RA11 4@-4MB46-@BB4 S2 S3 3RV10 31-4AA10 3RV10 31-4BA10 3RV10 31-4DA10 3RV10 31-4EA10 3RV10 31-4FA10 3RV10 31-4GA10 3RV10 31-4HA10 3RV10 41-4FA10 3RV10 41-4HA10 3RV10 41-4JA10 3RV10 41-4KA10 3RV10 41-4LA10 3RV10 41-4MA10 3RT1033-1AK60 3RT1034-1AK60 3RT1035-1AK60 3RT1036-1AK60 3RT1036-1AK60 3RA1931-1AA00 + 3RA1932-1AA00 3RT1044-1AK60 3RA1941-1AA00 3RT1045-1AK60 3RT1046-1AK60 3RT1046-1AK60 3RA1942-1AA00 + 24 VDC 1 1 1/2 2 2 3 3 3 3 5 5 7 1/2 10 10 – Order No. suffix Standard unit without auxiliary contacts. . . . . . . . . . . 0 0 1 SPDT NO/NC MSP auxiliary and 1 NO front mount contactor auxiliary. . . . . . . . . . . . . . . . . . 5 1 S2 S3 3RV10 31-4AA10 3RV10 31-4BA10 3RV10 31-4DA10 3RV10 31-4EA10 3RV10 31-4FA10 3RV10 31-4GA10 3RV10 31-4HA10 3RV10 41-4FA10 3RV10 41-4HA10 3RV10 41-4JA10 3RV10 41-4KA10 3RV10 41-4LA10 3RV10 41-4MA10 3RT1033-1BB40 3RT1034-1BB40 3RT1035-1BB40 3RT1036-1BB40 3RT1036-1BB40 3RA1931-1BA00 + 3RA1932-1AA00 3RT1044-1BB40 3RT1045-1BB40 3RT1046-1BB40 3RT1046-1BB40 3RA1941-1BA00 + 3RA1942-1AA00 1) For auxilary switches, see accessories page 4/50. 2) Selection depends on motor full load amps. Horsepower ratings for reference only. 3) Adapters for standard mounting rail are also suitable 1) For auxilary switches, see accessories page 2) Selection depends on motor full load amps. Horse4/50. power ratings for reference only. 3) Adapters for standard mounting rail are also suitable for screw mounting. Siemens Industry, Inc. Industrial Controls Catalog Product Category: IEC 4/37 Combination Starters &Starters Starters& for Group Installation Combination Starters for Group Installation 3RA1 / 3RA2 SIRIUS SIRIUS 3RA2 Motor Starters Non-Reversing, DC Coil up to 22 A 3RA21 direct-on-line starters 24 V DC Direct-on-line starting Size 3RA21 20 3RA21 10 Combination Starter, UL508 Type F All size S00 and S0 devices can be applied as Combination Starters with the addition of either of these line side connectors: 3RV29 28-1H, 3RV29 25-5EB or 3RV29 28-1K. 3RA21 20 UL Data Single-phase Three-phase2) HP ratings HP ratings 115 V 230 V 200 V 230 V 460 V 575 V FLA setting range inverseSCCR time delayed overload at 480 V release kA S0 Motor starter protector + Contactor + Link module + Busbar adapter3) Assembled starter Weight approx. Screw terminals Order No. A kg Selection depends on motor full load amps S00 Consisting of the following single devices 3RV20 3RT20 3RA ------- ------- ------- ------- ------- ------- 65 65 65 65 65 65 0.11…0.16 0.14…0.2 0.18…0.25 0.22…0.32 0.28…0.4 0.35…0.5 11-0AA10 11-0BA10 11-0CA10 11-0DA10 11-0EA10 11-0FA10 15-1BB41 1921-1DA00 + 8US12515DS10 -------1/10 1/8 1/6 ----1/10 1/8 1/6 1/4 1/3 1/2 ------1/2 1/2 3/4 1 ------1/2 3/4 3/4 1 ---1/2 3/4 3/4 1 1 1/2 2 3 --1/2 1/2 3/4 1 1 1/2 2 3 3 65 65 65 65 65 65 65 65 65 65 0.45…0.63 0.55…0.8 0.7… 1 0.9… 1.25 1.1… 1.6 1.4… 2 1.8… 2.5 2.2… 3.2 2.8… 4 3.5… 5 11-0GA10 11-0HA10 11-0JA10 11-0KA10 11-1AA10 11-1BA10 11-1CA10 11-1DA10 11-1EA10 11-1FA10 1/4 1/3 1/2 1/2 1 1/2 1 1 1/2 2 2 1 2 2 3 3 1 1/2 2 3 3 5 3 5 5 7 1/2 10 5 5 7 1/2 10 -- 65 65 65 65 65 4.5… 6.3 5.5… 8 7… 10 9… 12 11…16 11-1GA10 11-1HA10 11-1JA10 11-1KA10 11-4AA10 1/6 1/4 1/3 1/2 1/2 1/2 1/2 1 1 1/2 2 1 1 2 2 3 1 1 1/2 2 3 3 3 3 5 5 7 1/2 3 5 5 7 1/2 10 65 65 65 65 65 3.5… 5 4.5… 6.3 5.5… 8 7… 10 9… 12.5 11-1FA10 11-1GA10 11-1HA10 11-1JA10 11-1KA10 24-1BB40 1 1 1/2 1 1/2 2 2 2 3 3 3 5 3 5 5 5 7 1/2 5 5 7 1/2 7 1/2 10 10 10 15 15 20 ------ 65 65 50 50 50 11… 14… 17… 20… 27… 21-4AA10 21-4BA10 21-4CA10 21-4DA10 21-4EA10 26-1BB40 16 20 22 25 32 3RA21 10-0A@15-1BB4 3RA21 10-0B@15-1BB4 3RA21 10-0C@15-1BB4 3RA21 10-0D@15-1BB4 3RA21 10-0E@15-1BB4 3RA21 10-0F@15-1BB4 3RA21 10-0G@15-1BB4 3RA21 10-0H@15-1BB4 3RA21 10-0J@15-1BB4 3RA21 10-0K@15-1BB4 3RA21 10-1A@15-1BB4 3RA21 10-1B@15-1BB4 3RA21 10-1C@15-1BB4 3RA21 10-1D@15-1BB4 3RA21 10-1E@15-1BB4 3RA21 10-1F@15-1BB4 3RA21 10-1G@15-1BB4 3RA21 10-1H@16-1BB4 3RA21 10-1J@16-1BB4 3RA21 10-1K@17-1BB4 3RA21 10-4A@18-1BB4 16-1BB41 17-1BB41 18-1BB41 2921-1BA00 + 8US12515NT10 3RA21 20-1F@24-0BB4 3RA21 20-1G@24-0BB4 3RA21 20-1H@24-0BB4 3RA21 20-1J@24-0BB4 3RA21 20-1K@24-0BB4 3RA21 20-4A@26-0BB4 3RA21 20-4B@26-0BB4 3RA21 20-4C@27-0BB4 3RA21 20-4D@27-0BB4 3RA21 20-4E@27-0BB4 27-1BB40 Order No. supplement for mounting onto standard mounting rail or screw fixing Screw fixing with 1 push-in lug each per motor starter is possible (see "Accessories for Direct-On-Line and Reversing Starters"). Order No. supplement for mounting onto Fastbus 60mm busbar system With busbar adapter A for size S00 for size S0 1 2 D D 0.630 0.630 0.630 0.630 0.630 0.630 0.630 0.630 0.630 0.630 0.630 0.630 0.630 0.630 0.630 0.630 0.630 0.630 0.630 0.630 0.630 6 3RA21 10 Rated control supply voltage 24 V DC With screw connections • The motor starter protector and contactor are mechanically and electrically connected by means of the link module. • Auxiliary switches1) on the motor starter protector and the contactor can be easily fitted due to the modular system. • Integrated auxiliary switches: - Contactor size S00: 1 NO; - Contactor size S0: 1 NO + 1 NC 0.948 0.948 0.948 0.948 0.948 0.948 0.948 0.948 0.948 0.948 Add. weight 0.263 0.301 . 1) For auxiliary switches, see Accessories page 4/44. 2) Selection depends on the concrete motor full load amps. HP ratings for reference only. 3) Use only for mounting starter on 8US Fast Bus busbar systems. 4/38 Illustrations are approximate Siemens Industry, Inc. Industrial Controls Catalog Product Category: IEC SIRIUS Innovations Supplement 2012 6/15 Combination Starters & Starters for Group Installation 3RA1 / 3RA2 Starters SIRIUS Non-Reversing Fast Bus® AC Coil Selection and ordering data 3RA11 30 Direct-on-line starting For 60mm Fast Bus busbar systems All starters are suitable for use in Group Installation applications per NEC 430-53 (c) Motor starter protector and contactor are linked electrically by means of a link module and mounted on a Fastbus shoe Auxiliary switches 1) can be added easily to the MSP and the contactor Size S3 is kit form only - assembly required Combination Starter, UL508 Type F Size S2 devices can be applied as Combination Starters Size S3 devices can be applied as Combination Starters with the addition of a 3RT1946-4GA07 line side terminal kit SCCR: 65kA at 480V FLA setting Starter range Order No. Inverse-time delayed overload release Single-Phase Three-Phase2) HP Ratings HP ratings 115V 230V 200V 230V 460V Size Consisting of the following individual devices Motor starter protector + Contactor + Link module + Adapter shoe for Fastbus 575V A 110VAC 50Hz / 120 VAC 60Hz 1 1 1/2 2 2 3 3 3 3 5 5 7 1/2 10 10 3 3 5 5 7 1/2 7 1/2 10 7 1/2 10 15 15 20 20 5 5 7 1/2 10 10 15 15 15 15 20 25 30 30 5 7 1/2 10 10 15 15 15 15 20 25 25 30 30 10 15 20 25 30 30 40 30 40 50 60 75 75 15 20 25 30 40 40 50 40 50 60 75 – – 11 ... 16 14 ... 20 18 ... 25 22 ... 32 28 ... 40 36 ... 45 40 ... 50 28 ... 40 36 ... 50 45 ... 63 57 ... 75 70 ... 90 80 ... 100 3RA11 3@-4AD33-@AK6 3RA11 3@-4BD33-@AK6 3RA11 3@-4DD33-@AK6 3RA11 3@-4ED34-@AK6 3RA11 3@-4FD35-@AK6 3RA11 3@-4GD36-@AK6 3RA11 3@-4HD36-@AK6 3RA11 4@-4FD44-@AK6 3RA11 4@-4HD44-@AK6 3RA11 4@-4JD44-@AK6 3RA11 4@-4KD45-@AK6 3RA11 4@-4LD46-@AK6 3RA11 4@-4MD46-@AK6 5 5 7 1/2 10 10 15 15 15 15 20 25 30 30 5 7 1/2 10 10 15 15 15 15 20 25 25 30 30 10 15 20 25 30 30 40 30 40 50 60 75 75 15 20 25 30 40 40 50 40 50 60 75 – – 11 ... 16 14 ... 20 18 ... 25 22 ... 32 28 ... 40 36 ... 45 40 ... 50 28 ... 40 36 ... 50 45 ... 63 57 ... 75 70 ... 90 80 ... 100 3RA11 3@-4AD33-@BB4 3RA11 3@-4BD33-@BB4 3RA11 3@-4DD33-@BB4 3RA11 3@-4ED34-@BB4 3RA11 3@-4FD35-@BB4 3RA11 3@-4GD36-@BB4 3RA11 3@-4HD36-@BB4 3RA11 4@-4FD44-@BB4 3RA11 4@-4HD44-@BB4 3RA11 4@-4JD44-@BB4 3RA11 4@-4KD45-@BB4 3RA11 4@-4LD46-@BB4 3RA11 4@-4MD46-@BB4 S2 S3 3RV10 31-4AA10 3RV10 31-4BA10 3RV10 31-4DA10 3RV10 31-4EA10 3RV10 31-4FA10 3RV10 31-4GA10 3RV10 31-4HA10 3RV10 41-4FA10 3RV10 41-4HA10 3RV10 41-4JA10 3RV10 41-4KA10 3RV10 41-4LA10 3RV10 41-4MA10 3RT1033-1AK60 3RT1034-1AK60 3RT1035-1AK60 3RT1036-1AK60 3RT1036-1AK60 3RT1044-1AK60 3RT1045-1AK60 3RT1046-1AK60 3RT1046-1AK60 3RA1931-1AA00 + 8US1261-5FP08 3RA1941-1AA00 + 8US1211-4TR00 24VDC 1 1 1/2 2 2 3 3 3 3 5 5 7 1/2 10 10 3 3 5 5 7 1/2 7 1/2 10 7 1/2 10 15 15 20 20 Order No. suffix Standard unit without auxiliary contacts. . . . . . . . . . . 0 0 1 SPDT NO/NC MSP auxiliary and 1 NO front mount contactor auxiliary. . . . . . . . . . . . . . . . . . 5 1 S2 S3 3RV10 31-4AA10 3RV10 31-4BA10 3RV10 31-4DA10 3RV10 31-4EA10 3RV10 31-4FA10 3RV10 31-4GA10 3RV10 31-4HA10 3RV10 41-4FA10 3RV10 41-4HA10 3RV10 41-4JA10 3RV10 41-4KA10 3RV10 41-4LA10 3RV10 41-4MA10 3RT1033-1BB40 3RT1034-1BB40 3RT1035-1BB40 3RT1036-1BB40 3RT1036-1BB40 3RA1931-1BA00 + 8US1261-5FP08 3RT1044-1BB40 3RT1045-1BB40 3RT1046-1BB40 3RT1046-1BB40 3RA1941-1BA00 + 8US1211-4TR00 1) For auxiliary switches, see Accessories page 4/44. 2) Selection depends on motor full load amps. Horsepower ratings for reference only. 1) For auxiliary switches, see accessories page 4/50. 2) Selection depends on motor full load amps. Horsepower ratings for reference only. Siemens Industry, Inc. Industrial Controls Catalog Product Category: IEC 4/39 Combination Starters &Starters Starters for Group Combination & Starters for Installation Group Installation 3RA1 / 3RA2 Starters SIRIUS SIRIUS 3RA2 Motor Starters Reversing, AC Coil up to 22 A 3RA22 reversing starters 50/60 Hz 110/120 V AC Selection and ordering data Rated control supply voltage 50/60 Hz 110/120 V AC With screw connections • The motor starter protector and contactor are mechanically and electrically connected by means of the link module. • Auxiliary switches1) on the motor starter protector and the contactor can be easily fitted due to the modular system. • With the contactor S0, an integrated NO contact is available for free use. Reversing duty 3RA22 20 3RA22 10 Size UL Data Single-phase Three-phase2) HP ratings HP ratings 115 V 230 V 200 V 230 V 460 V 575 V Combination Starter, UL508 Type F All size S00 and S0 devices can be applied as Combination Starters with the addition of either of these line side connectors: 3RV29 28-1H, 3RV29 25-5EB or 3RV29 28-1K. 3RA22 20 FLA setting Consisting of the following single devices range inverseSCCR time delayed Motor starter + 2 contac- + Link module overload at protector tors + Assembly kit 480 V release RH/RS3) kA S0 Weight approx. Screw terminals Order No. A kg Selection depends on motor full load amps 3RV20 3RT20 3RA ------- ------- ------- ------- ------- 65 65 65 65 65 65 0.11…0.16 0.14…0.2 0.18…0.25 0.22…0.32 0.28…0.4 0.35…0.5 11-0AA10 11-0BA10 11-0CA10 11-0DA10 11-0EA10 11-0FA10 15-1AK62 1921-1DA00 + 2913-2AA14) + 2913-1DB1 (RS) -------1/10 1/8 1/6 ----1/10 1/8 1/6 1/4 1/3 1/2 ------1/2 1/2 3/4 1 ------1/2 3/4 3/4 1 ---1/2 3/4 3/4 1 1 1/2 2 3 --1/2 1/2 3/4 1 1 1/2 2 3 3 65 65 65 65 65 65 65 65 65 65 0.45…0.63 0.55…0.8 0.7… 1 0.9… 1.25 1.1… 1.6 1.4… 2 1.8… 2.5 2.2… 3.2 2.8… 4 3.5… 5 11-0GA10 11-0HA10 11-0JA10 11-0KA10 11-1AA10 11-1BA10 11-1CA10 11-1DA10 11-1EA10 11-1FA10 1/4 1/3 1/2 1/2 1 1/2 1 1 1/2 2 2 1 2 2 3 3 1 1/2 2 3 3 5 3 5 5 7 1/2 10 5 5 7 1/2 10 -- 65 65 65 65 65 4.5… 6.3 5.5… 8 7… 10 9… 12 11…16 11-1GA10 11-1HA10 11-1JA10 11-1KA10 11-4AA10 1/6 1/4 1/3 1/2 1/2 1/2 1/2 1 1 1/2 2 1 1 2 2 3 1 1 1/2 2 3 3 3 3 5 5 7 1/2 3 5 5 7 1/2 10 65 65 65 65 65 3.5… 5 4.5… 6.3 5.5… 8 7… 10 9… 12.5 11-1FA10 11-1GA10 11-1HA10 11-1JA10 11-1KA10 1 1 1/2 1 1/2 2 2 2 3 3 3 5 3 5 5 5 7 1/2 5 5 7 1/2 7 1/2 10 10 10 15 15 20 ------ 65 65 50 50 50 11… 14… 17… 20… 27… 21-4AA10 21-4BA10 21-4CA10 21-4DA10 21-4EA10 S00 ------- Assembled starter 16 20 22 25 32 3RA22 10-0A@15-2AK6 3RA22 10-0B@15-2AK6 3RA22 10-0C@15-2AK6 3RA22 10-0D@15-2AK6 3RA22 10-0E@15-2AK6 3RA22 10-0F@15-2AK6 3RA22 10-0G@15-2AK6 3RA22 10-0H@15-2AK6 3RA22 10-0J@15-2AK6 3RA22 10-0K@15-2AK6 3RA22 10-1A@15-2AK6 3RA22 10-1B@15-2AK6 3RA22 10-1C@15-2AK6 3RA22 10-1D@15-2AK6 3RA22 10-1E@15-2AK6 3RA22 10-1F@15-2AK6 3RA22 10-1G@15-2AK6 3RA22 10-1H@16-2AK6 3RA22 10-1J@16-2AK6 3RA22 10-1K@17-2AK6 3RA22 10-4A@18-2AK6 16-1AK62 17-1AK62 18-1AK62 24-1AK60 2921-1AA00 + 2923-1BB1 (RH) + 2923-1DB1 (RS) 3RA22 20-4A@26-0AK6 3RA22 20-4B@26-0AK6 3RA22 20-4C@27-0AK6 3RA22 20-4D@27-0AK6 3RA22 20-4E@27-0AK6 26-1AK60 27-1AK60 0.824 0.824 0.824 0.824 0.824 0.824 0.824 0.824 0.824 0.824 0.824 0.824 0.824 0.824 0.824 1.434 1.434 1.434 1.434 1.434 1.434 1.434 1.434 1.434 1.434 Add. weight Order No. supplement for mounting onto standard mounting rail or screw fixing • Without standard mounting rail adapter for size S004) • With 2 standard mounting rail adapters for size S0 Screw fixing with 2 push-in lugs each per motor starter is possible Order No. supplement for mounting onto Fastbus 60mm busbar system With 8US Fast Bus busbar adapter 3RA22 20-1F@24-0AK6 3RA22 20-1G@24-0AK6 3RA22 20-1H@24-0AK6 3RA22 20-1J@24-0AK6 3RA22 20-1K@24-0AK6 0.824 0.824 0.824 0.824 0.824 0.824 6 3RA22 10 for size S00 for size S0 1 2 A B 1 2 D D 0.486 0.293 1) For push-in lugs and auxiliary switches, see Accessories on pages 4/44 and 4/52. 2) Selection depends on the motor full load amps. HP ratings for reference only. 3) According to ordering option: RH = assembly kit for reversing duty with standard rail mounting adapter in size S0. RS = assembly kit for reversing duty with 8US Fast Bus busbar mounting. 4) With standard rail mounting or screw fixing, the 3RA29 13-2AA1 wiring kit is required for size S00. 4/40 Illustrations are approximate Product Category: IEC SIRIUS Innovations Supplement 2012 Siemens Industry, Inc. Industrial Controls Catalog 6/17 Combination Starters & Starters for Group Installation SIRIUS 3RA1 / 3RA2 Reversing, AC Coil up to 100 A Selection and ordering data 3RA12 20 For 35 mm standard mounting rail or screw mounting All starters are suitable for use in Group Installation applications per NEC 430-53 (c) Motor starter protector and contactor are linked electrically and mechanically by means of a link module and adapter plate Starter includes both electrical and mechanical interlocks Auxiliary switches 1) can be added easily to the MSP and the contactor Combination Starter, UL508 Type F Size S2 devices can be applied as Combination Starters Size S3 devices can be applied as Combination Starters with the addition of a 3RT1946-4GA07 line side terminal kit SCCR: 65kA at 480V Reversing duty FLA set- Starter ting range Order No. Inversetime delayed overload Single-Phase Three-Phase2) HP Ratings HP ratings 115V 230V 200V 230V 460V Size Consisting of the following individual devices Motor starter protector + 2 Contactors + Link module + assembly kit RH3) 575V A 110VAC 50Hz / 120VAC 60Hz 1 1 1/2 2 2 3 3 3 3 5 5 7 1/2 10 10 3 3 5 5 7 1/2 7 1/2 10 7 1/2 10 15 15 20 20 5 5 7 1/2 10 10 15 15 15 15 20 25 30 30 5 7 1/2 10 10 15 15 15 15 20 25 25 30 30 10 15 20 25 30 30 40 30 40 50 60 75 75 15 20 25 30 40 40 50 40 50 60 75 – – 11 ... 16 14 ... 20 18 ... 25 22 ... 32 28 ... 40 36 ... 45 40 ... 50 28 ... 40 36 ... 50 45 ... 63 57 ... 75 70 ... 90 80 ... 100 3RA12 3@-4AB33-@AK6 3RA12 3@-4BB33-@AK6 3RA12 3@-4DB33-@AK6 3RA12 3@-4EB34-@AK6 3RA12 3@-4FB35-@AK6 3RA12 3@-4GB36-@AK6 3RA12 3@-4HB36-@AK6 3RA12 4@-4FB44-@AK6 3RA12 4@-4HB44-@AK6 3RA12 4@-4JB44-@AK6 3RA12 4@-4KB45-@AK6 3RA12 4@-4LB46-@AK6 3RA12 4@-4MB46-@AK6 3 3 5 5 7 1/2 7 1/2 10 7 1/2 10 15 15 20 20 5 5 7 1/2 10 10 15 15 15 15 20 25 30 30 5 7 1/2 10 10 15 15 15 15 20 25 25 30 30 10 15 20 25 30 30 40 30 40 50 60 75 75 15 20 25 30 40 40 50 40 50 60 75 – – 11 ... 16 14 ... 20 18 ... 25 22 ... 32 28 ... 40 36 ... 45 40 ... 50 28 ... 40 36 ... 50 45 ... 63 57 ... 75 70 ... 90 80 ... 100 3RA12 3@-4AB33-@BB4 3RA12 3@-4BB33-@BB4 3RA12 3@-4DB33-@BB4 3RA12 3@-4EB34-@BB4 3RA12 3@-4FB35-@BB4 3RA12 3@-4GB36-@BB4 3RA12 3@-4HB36-@BB4 3RA12 4@-4FB44-@BB4 3RA12 4@-4HB44-@BB4 3RA12 4@-4JB44-@BB4 3RA12 4@-4KB45-@BB4 3RA12 4@-4LB46-@BB4 3RA12 4@-4MB46-@BB4 S2 S3 3RV10 31-4AA10 3RV10 31-4BA10 3RV10 31-4DA10 3RV10 31-4EA10 3RV10 31-4FA10 3RV10 31-4GA10 3RV10 31-4HA10 3RV10 41-4FA10 3RV10 41-4HA10 3RV10 41-4JA10 3RV10 41-4KA10 3RV10 41-4LA10 3RV10 41-4MA10 3RT1033-1AK60 3RT1034-1AK60 3RT1035-1AK60 3RT1036-1AK60 3RT1036-1AK60 3RT1044-1AK60 3RT1045-1AK60 3RT1046-1AK60 3RT1046-1AK60 3RA1931-1AA00 + 3RA1933-1B4) 3RA1941-1AA00 + 3RA1943-1B4) 24VDC 1 1 1/2 2 2 3 3 3 3 5 5 7 1/2 10 10 Order No. suffix Standard unit without auxiliary contacts. . . . . . . . . . . 0 0 1 SPDT NO/NC MSP auxiliary and 1 NO front mount contactor auxiliary. . . . . . . . . . . . . . . . . . 5 1 S2 S3 3RV10 31-4AA10 3RV10 31-4BA10 3RV10 31-4DA10 3RV10 31-4EA10 3RV10 31-4FA10 3RV10 31-4GA10 3RV10 31-4HA10 3RV10 41-4FA10 3RV10 41-4HA10 3RV10 41-4JA10 3RV10 41-4KA10 3RV10 41-4LA10 3RV10 41-4MA10 3RT1033-1BB40 3RT1034-1BB40 3RT1035-1BB40 3RT1036-1BB40 3RT1036-1BB40 3RT1044-1BB40 3RT1045-1BB40 3RT1046-1BB40 3RT1046-1BB40 3RA1931-1BA00 + 3RA1933-1B4) 3RA1941-1BA00 + 3RA1943-1B4) RH = Reversing duty for rail mounting. 1) For auxiliary switches, see Accessories page 4/44. 2) Selection depends on motor full load amps. Horse power ratings for reference only. RH = Reversing duty for rail mounting. 3) forswitches, standardsee mounting rail are also suitable for screw mounting. 1) Adapters For auxiliary accessories page 4/44. 3) Adapters for standard mounting rail are also suitable for screw mounting. page 4/50 2) Mechanical Selection depends on motor amps.separately; Horse 4) interlock mustfull beload ordered see Accessories power ratings for reference only. Siemens Industry, Inc. Industrial Controls Catalog 4) Mechanical interlock must be ordered separately; see accessories page 4/50. Product Category: IEC 4/41 Combination Starters &Starters Starters for Group Combination & Starters for Installation Group Installation SIRIUS SIRIUS 3RA2 Motor Starters 3RA1 / 3RA2 Reversing, DC Coil up to 22 A 3RA22 reversing starters 24 V DC Rated control supply voltage 24 V DC With screw connections • The motor starter protector and contactor are mechanically and electrically connected by means of the link module. • Auxiliary switches1) on the motor starter protector and the contactor can be easily fitted due to the modular system. • With the contactor S0, an integrated NO contact is available for free use. Reversing duty 3RA22 20 3RA22 10 Size UL Data 2) Single-phase Three-phase HP ratings HP ratings 115 V 230 V 200 V 230 V 460 V 575 V Combination Starter, UL508 Type F All size S00 and S0 devices can be applied as Combination Starters with the addition of either of these line side connectors: 3RV29 28-1H, 3RV29 25-5EB or 3RV29 28-1K. 3RA22 20 FLA setting Consisting of the following single devices range inversetime delayed SCCR Motor starter + 2 contac- + Link module overload at protector tors + Assembly kit release 480 V RH/RS3) kA S0 Weight approx. Screw terminals Order No. A kg Selection depends on motor full load amps 3RV20 3RT20 3RA ------- ------- ------- ------- ------- 65 65 65 65 65 65 0.11…0.16 0.14…0.2 0.18…0.25 0.22…0.32 0.28…0.4 0.35…0.5 11-0AA10 11-0BA10 11-0CA10 11-0DA10 11-0EA10 11-0FA10 15-1BB42 1921-1DA00 '+ 2913-2AA14) '+ 2913-1DB1 (RS) -------1/10 1/8 1/6 ----1/10 1/8 1/6 1/4 1/3 1/2 ------1/2 1/2 3/4 1 ------1/2 3/4 3/4 1 ---1/2 3/4 3/4 1 1 1/2 2 3 --1/2 1/2 3/4 1 1 1/2 2 3 3 65 65 65 65 65 65 65 65 65 65 0.45…0.63 0.55…0.8 0.7… 1 0.9… 1.25 1.1… 1.6 1.4… 2 1.8… 2.5 2.2… 3.2 2.8… 4 3.5… 5 11-0GA10 11-0HA10 11-0JA10 11-0KA10 11-1AA10 11-1BA10 11-1CA10 11-1DA10 11-1EA10 11-1FA10 1/4 1/3 1/2 1/2 1 1/2 1 1 1/2 2 2 1 2 2 3 3 1 1/2 2 3 3 5 3 5 5 7 1/2 10 5 5 7 1/2 10 -- 65 65 65 65 65 4.5… 6.3 5.5… 8 7… 10 9… 12 11…16 11-1GA10 11-1HA10 11-1JA10 11-1KA10 11-4AA10 1/6 1/4 1/3 1/2 1/2 1/2 1/2 1 1 1/2 2 1 1 2 2 3 1 1 1/2 2 3 3 3 3 5 5 7 1/2 3 5 5 7 1/2 10 65 65 65 65 65 3.5… 5 4.5… 6.3 5.5… 8 7… 10 9… 12.5 11-1FA10 11-1GA10 11-1HA10 11-1JA10 11-1KA10 24-1BB40 1 1 1/2 1 1/2 2 2 2 3 3 3 5 3 5 5 5 7 1/2 5 5 7 1/2 7 1/2 10 10 10 15 15 20 ------ 65 65 50 50 50 11… 14… 17… 20… 27… 21-4AA10 21-4BA10 21-4CA10 21-4DA10 21-4EA10 26-1BB40 S00 ------- Assembled starter 16 20 22 25 32 3RA22 10-0A@15-2BB4 3RA22 10-0B@15-2BB4 3RA22 10-0C@15-2BB4 3RA22 10-0D@15-1BB4 3RA22 10-0E@15-2BB4 3RA22 10-0F@15-1BB4 3RA22 10-0G@15-2BB4 3RA22 10-0H@15-2BB4 3RA22 10-0J@15-2BB4 3RA22 10-0K@15-2BB4 3RA22 10-1A@15-2BB4 3RA22 10-1B@15-2BB4 3RA22 10-1C@15-2BB4 3RA22 10-1D@15-2BB4 3RA22 10-1E@15-2BB4 3RA22 10-1F@15-2BB4 3RA22 10-1G@15-2BB4 3RA22 10-1H@16-2BB4 3RA22 10-1J@16-2BB4 3RA22 10-1K@17-2BB4 3RA22 10-4A@18-2BB4 16-1BB42 17-1BB42 18-1BB42 2921-1BA00 '+ 2923-1BB1 (RH) '+ 2923-1DB1 (RS) 3RA22 20-4A@26-0BB4 3RA22 20-4B@26-0BB4 3RA22 20-4C@27-0BB4 3RA22 20-4D@27-0BB4 3RA22 20-4E@27-0BB4 27-1BB40 0.934 0.934 0.934 0.934 0.934 0.934 0.934 0.934 0.934 0.934 0.934 0.934 0.934 0.934 0.934 1.811 1.811 1.811 1.811 1.811 1.811 1.811 1.811 1.811 1.811 Add. weight Order No. supplement for mounting onto standard mounting rail or screw fixing • Without standard mounting rail adapter for size S004) • With 2 standard mounting rail adapters for size S0 Screw fixing with 2 push-in lugs each per motor starter is possible Order No. supplement for mounting onto Fastbus 60mm busbar system With 8US Fast Bus busbar adapter 3RA22 20-1F@24-0BB4 3RA22 20-1G@24-0BB4 3RA22 20-1H@24-0BB4 3RA22 20-1J@24-0BB4 3RA22 20-1K@24-0BB4 0.934 0.934 0.934 0.934 0.934 0.934 6 3RA22 10 for size S00 for size S0 1 2 A B 1 2 D D 0.486 0.306 1) For push-in lugs and auxiliary switches, see Accessories on pages 4/44 and 4/52. 2) Selection depends on the motor full load amps. HP ratings for reference only. 3) Code for abbreviations: RH = assembly kit for reversing duty with standard rail mounting adapter in size S0. RS = assembly kit for reversing duty with 8US Fast Bus busbar mounting. 4) With standard rail mounting or screw fixing, the 3RA29 13-2AA1 wiring kit and link module are required for size S00. 4/42 Illustrations are approximate Product Category: IEC SIRIUS Innovations Supplement 2012 Siemens Industry, Inc. Industrial Controls Catalog 6/19 Combination Starters & Starters for Group Installation 3RA1 / 3RA2 SIRIUS Reversing Fast Bus®, AC Coil up to 100 A Selection and ordering data For 60 mm Fast Bus busbar systems All starters are suitable for use in Group Installation applications per NEC 430-53 (c) Motor starter protector and contactor are linked electrically and mechanically by means of a link module and mounted on a Fastbus Shoe Starter includes both electrical and mechanical interlocks Auxiliary switches 1) can be added easily to the MSP and the contactor Size S3 is kit form only - assembly required Combination Starter, UL508 Type F Size S2 devices can be applied as Combination Starters Size S3 devices can be applied as Combination Starters with the addition of a 3RT1946-4GA07 line side terminal kit SCCR: 65kA at 480V Reversing duty 3RA12 20 FLA setting range Inverse-time delayed overload release Single-Phase Three-Phase2) HP ratings HP Ratings 115V 230V 200V 230V 460V 575V Size Starter Order No. Consisting of the following individual devices Motor starter protector + Contactor + Link module + Adapter shoe for Fastbus A 110VAC 50Hz / 120VAC 60Hz 1 1 1/2 2 2 3 3 3 3 5 5 7 1/2 10 10 3 3 5 5 7 1/2 7 1/2 10 7 1/2 10 15 15 20 20 5 5 7 1/2 10 10 15 15 15 15 20 25 30 30 5 7 1/2 10 10 15 15 15 15 20 25 25 30 30 10 15 20 25 30 30 40 30 40 50 60 75 75 15 20 25 30 40 40 50 40 50 60 75 – – 11 ... 16 14 ... 20 18 ... 25 22 ... 32 28 ... 40 36 ... 45 40 ... 50 28 ... 40 36 ... 50 45 ... 63 57 ... 75 70 ... 90 80 ... 100 3RA12 3@-4AD33-@AK6 3RA12 3@-4BD33-@AK6 3RA12 3@-4DD33-@AK6 3RA12 3@-4ED34-@AK6 3RA12 3@-4FD35-@AK6 3RA12 3@-4GD36-@AK6 3RA12 3@-4HD36-@AK6 3RA12 4@-4FD44-@AK6 3RA12 4@-4HD44-@AK6 3RA12 4@-4JD44-@AK6 3RA12 4@-4KD45-@AK6 3RA12 4@-4LD46-@AK6 3RA12 4@-4MD46-@AK6 S2 3 3 5 5 7 1/2 7 1/2 10 7 1/2 10 15 15 20 20 5 5 7 1/2 10 10 15 15 15 15 20 25 30 30 5 7 1/2 10 10 15 15 15 15 20 25 25 30 30 10 15 20 25 30 30 40 30 40 50 60 75 75 15 20 25 30 40 40 50 40 50 60 75 – – 11 ... 16 14 ... 20 18 ... 25 22 ... 32 28 ... 40 36 ... 45 40 ... 50 28 ... 40 36 ... 50 45 ... 63 57 ... 75 70 ... 90 80 ... 100 3RA12 3@-4AD33-@BB4 3RA12 3@-4BD33-@BB4 3RA12 3@-4DD33-@BB4 3RA12 3@-4ED34-@BB4 3RA12 3@-4FD35-@BB4 3RA12 3@-4GD36-@BB4 3RA12 3@-4HD36-@BB4 3RA12 4@-4FD44-@BB4 3RA12 4@-4HD44-@BB4 3RA12 4@-4JD44-@BB4 3RA12 4@-4KD45-@BB4 3RA12 4@-4LD46-@BB4 3RA12 4@-4MD46-@BB4 S2 S3 3RV10 31-4AA10 3RV10 31-4BA10 3RV10 31-4DA10 3RV10 31-4EA10 3RV10 31-4FA10 3RV10 31-4GA10 3RV10 31-4HA10 3RV10 41-4FA10 3RV10 41-4HA10 3RV10 41-4JA10 3RV10 41-4KA10 3RV10 41-4LA10 3RV10 41-4MA10 3RT1033-1AK60 3RT1034-1AK60 3RT1035-1AK60 3RT1036-1AK60 3RT1036-1AK60 3RA1931-1AA00 + 3RA1933-1D3) 3RT1044-1AK60 3RT1045-1AK60 3RT1046-1AK60 3RT1046-1AK60 3RA1941-1AA00 + 3RA1943-2A3) 24VDC 1 1 1/2 2 2 3 3 3 3 5 5 7 1/2 10 10 Order No. suffix Standard unit without auxiliary contacts. . . . . . . . 0 0 1 SPDT NO/NC MSP auxiliary and 1 NO front mount contactor auxiliary. . . . . . . . . . . . . . . 5 1 S3 3RV10 31-4AA10 3RV10 31-4BA10 3RV10 31-4DA10 3RV10 31-4EA10 3RV10 31-4FA10 3RV10 31-4GA10 3RV10 31-4HA10 3RV10 41-4FA10 3RV10 41-4HA10 3RV10 41-4JA10 3RV10 41-4KA10 3RV10 41-4LA10 3RV10 41-4MA10 3RT1033-1BB40 3RT1034-1BB40 3RT1035-1BB40 3RT1036-1BB40 3RT1036-1BB40 3RA1931-1BA00 + 3RA1933-1D3) 3RT1044-1BB40 3RT1045-1BB40 3RT1046-1BB40 3RT1046-1BB40 3RA1941-1BA00 + 3RA 1943-2A3) RH = Reversing duty for rail mounting. 1) For auxiliary switches, see Accessories page 4/44. 2) Selection depends on motor full load amps. Horsepower ratings for reference only. RH = Reversing duty for rail mounting. 3)1)Mechanical be orderedpage separately; see Accessories pagemust 4/50. For auxiliaryinterlock switches,must see accessories 4/44. 3) Mechanical interlock be ordered separately; see 2) Selection depends on motor full load amps. Horsepower ratings for reference only. Siemens Industry, Inc. Industrial Controls Catalog accessories page 4/50. Product Category: IEC 4/43 Combination Starters & Starters for Group Installation SIRIUS 3RA1 / 3RA2 Accessories Auxiliary switches Overview The accessories listed here are parts and add-ons for the 3RA1/3RA2 direct-on-line and reversing starters as well as components for the customer assembly of motor starters Selection and ordering data 3RV29 01-1E 3RV29 01-2E 3RV29 01-1A 3RV29 01-2A 3RV29 02-1A 3RV29 02-2D For MSPs Screw Terminals Weight Spring-type approx. Terminals Weight approx. Size kg Order No. kg S00, S0 3RV29 01-1D 0.014 -- 3RV19 01-1D 0.020 -- S00, S0 3RV29 01-1E 0.016 3RV29 01-2E 3RV19 01-1E 0.020 -- S00, S0 3RV29 01-1A 0.036 3RV29 01-2A 3RV19 01-1A 0.030 -- Order No. Auxillary switches for motor starter protectors 1 Transverse auxillary switches For front mounting 1 CO S2,S3 1 NO + 1 NC S2,S3 0.016 Lateral auxillary switches Mountable on the left 1 NO + 1 NC S2, S3 0.035 1 One transverse auxilary switch and one lateral auxilary switch can be attached per motor starter protector. The lateral auxilary switch with 2 NO + 2 NC is used without a transverse auxillary switch. Rated control supply voltage Us AC 50 Hz AC 60 Hz AC 50/60 Hz 100% ON period 1 AC/DC 50/60 Hz, DC 5s ON period 2 V V V V For MSPs Screw Terminals Weight Spring-type approx. Terminals Weight approx. Size Order No. kg kg Order No. Auxillary releases for motor starter protectors 3 Undervoltage releases 415 480 — — S00, S0 3RV29 02-1AV1 0.117 — 415 480 — — S2, S3 3RV19 02-1AV1 0.129 — S00, S0 3RV29 02-1DB0 0.119 3RV29 02-2DB0 0.115 3RV29 02-1DF0 0.119 3RV29 02-2DF0 0.115 Shunt releases — — 20…24 20...70 — — 90…110 70...190 — — 24 — — — 120 — S2, S3 3RV19 02-1DB0 0.113 — 3RV19 02-1DF0 0.135 — 1 The voltage range is valid for 100% (infinite) ON period. The response voltage lies at 0.9 of the lower limit of the voltage range. 2 The voltage range is valid for 5s ON period at AC 50 Hz/60 Hz and DC. The response voltage lies at 0.85 of the lower limit of the voltage range. 3 One auxiliary release can be mounted on the right per motor starter protector (does not apply to 3RV21 motor starter protectors with overload relay function). 4/44 Product Category: IEC Siemens Industry, Inc. Industrial Controls Catalog SIRIUS Combination Starters & Starters for Group Installation 3RA1 / 3RA2 Accessories Auxiliary switches, terminals Selection and ordering data For Conductors Version Size Screw Terminals Weight Spring-type approx. Terminals Weight approx. Order No. kg Order No. kg Auxillary switch blocks for snapping on the front for contactors Cable entry from below 3RH29 11-1BA10 S00, S0 1-pole 1 NC 3RH29 11-1BA10 0.020 — S00, S0 1-pole 1 NO 3RH29 11-1BA01 0.020 — S00, S0 2-pole 1 NO + 1 NC 3RH29 11-1MA11 0.050 — S00, S0 2-pole 2 NO 3RH29 11-1MA20 0.050 — S2, S3 2-pole 1 NO + 1 NC 3RH19 11-1MA11 0.075 — S2, S3 2-pole 2 NO 3RH19 11-1MA20 0.075 — S2, S3 2-pole 2 NC 3RH19 11-1MA02 0.075 — S00, S0 4-pole 2 NO + 2 NC 3RH29 11-1FA22 0.060 3RH29 11-2FA22 S2, S3 4-pole 2 NO + 2 NC 3RH19 21-1FA22 0.075 — S2, S3 1-pole 1 NO 3RH19 21-1CA10 0.020 — S2, S3 1-pole 1 NC 3RH19 21-1CA01 0.020 — S00 2-pole 1 NO + 1 NC 3RH29 11-1DA11 0.039 3RH29 11-2DA11 0.050 S00 2-pole 2 NC 3RH29 11-1DA02 0.039 3RH29 11-2DA02 0.050 S0 2-pole 1 NO + 1 NC 3RH29 21-1DA11 0.039 3RH29 21-2DA11 0.050 S0 2-pole 2 NC 3RH29 21-1DA02 0.041 3RH29 21-2DA02 0.050 S0 2-pole 2 NO 3RH29 21-1DA20 0.041 3RH29 21-2DA20 0.050 2 NC 3RH29 11-1DA02 0.020 3RH29 11-2DA02 0.050 3RH29 11-1MA20 Cable entry from two sides 3RH29 11-1FA22 0.049 Laterally mountable auxiliary switch blocks for contactors S00 3RH29 11-1DA11 S00 1 NO + 1 NC 3RH29 11-1DA11 0.040 3RH29 11-2DA11 0.050 S00 1 NO 3RH29 11-1DA20 0.040 3RH29 11-2DA20 0.050 S0 2 NC 3RH29 21-1DA02 0.050 3RH29 21-2DA02 0.050 S0 1 NO + 1 NC 3RH29 21-1DA11 0.050 3RH29 21-2DA11 0.050 S0 1 NO 3RH29 21-1DA20 0.050 3RH29 21-2DA20 0.050 3RT19 16-4RD01 0.020 — 3RT19 26-4RD01 0.020 — 3RT19 00-4RE01 0.025 — Connection modules for contactors with screw terminals Adaptors for contactors 3RT19 26-4RD01 Ambient temperature Tu max = 60 °C Rated operational current Ie at AC-3/400 V: 20A S0 Rated operational current Ie at AC-3/400 V: 25A Plugs for contactors S00, S0 S00 3RT19 00-4RE01 Siemens Industry, Inc. Industrial Controls Catalog Product Category: IEC 4/45 Combination Starters & Starters for Group Installation 3RA1 / 3RA2 Accessories SIRIUS Terminals Selection and ordering data For Conductors Version Size Screw Terminals Weight approx. Order No. kg Auxillary switch blocks for snapping on the front for contactors 3RV29 28-1H Note: As of July 2001, UL 508 demands for “Combination Motor Controller Type E” 1” air gaps and 2” creepage distances at lineside. The following terminal blocks must be used in S0 and S3 MSP’s 3RV10. The S2 MSP 3RV10 conforms with stipulated air gaps and creepage distances without terminal block. Terminal blocks are not required for use according to CSA. With size S0 these terminal blocks cannot be used in combination with 3-phase busbars 3RV19.5. This also applies to size S3 in combination with transverse auxiliary switches. Terminal block type E for extended air/creepage distance (1” and 2”) S00, S0 3RV29 28-1H 0.120 S00, S0 3RV29 28-1K 0.120 S2, S3 3RT19 46-4GA07 0.120 3RV29 28-1K 3RT19 46-4GA07 4/46 Product Category: IEC Siemens Industry, Inc. Industrial Controls Catalog SIRIUS Combination Starters & Starters for Group Installation 3RA1 / 3RA2 Accessories Surge suppressors Selection and ordering data For Version Conductors Rated control Surge supply voltage Us1 Suppressors Weight approx. Size V Order No. kg 3RT29 16-1BB00 0.010 3RT29 16-1BC00 0.010 3RT29 16-1CB00 0.010 3RT29 16-1CC00 0.010 Auxillary switch blocks for snapping on the front for contactors Size S00 — For plugging onto the front side of the contactors with and without auxiliary switch blocks 3RT2. Varistors 24 … 48 AC 24 … 70 DC 48 … 127 AC 70 … 150 DC 3RT29 16-1EH00 3RT2. RC elements 24 … 48 AC 24 … 70 DC 48 … 127 AC 70 … 150 DC 3RT2. Noise suppression 12 … 250 DC 3RT29 16-1DG00 0.010 3RT2. Diode assemblies 12 … 250 DC 3RT29 16-1EH00 0.010 (diode and Zener diode) for DC operation and short break times Size S0 — For plugging onto the front side of the contacctors (prior to mounting of the auxiliary switch block) 3RT20.2 Varistors 3RT29 26-1BB00 0.010 3RT29 26-1BC00 0.010 24 … 48 AC 24 … 70 DC 3RT29 26-1CB00 0.010 48 … 127 AC 3RT29 26-1CC00 0.010 24 … 48 AC 24 … 70 DC 48 … 127 AC 70 … 150 DC 3RT29 26-1BB00 3RT20.2 RC elements 70 … 150 DC 3RT20.2 Diode assemblies 24 DC 3RT29 26-1ER00 0.010 for DC operation and short break times 30 … 250 DC 3RT29 26-1ES00 0.010 Varistors 24 … 48 AC 3RT19 36-1BB00 0.025 3RT19 36-1BC00 0.025 3RT19 36-1CB00 0.040 3RT19 36-1CC00 0.040 Sizes S2 and S3 3RT10 3. 3RT10 4. 24 … 70 DC 48 … 127 AC 70 … 150 DC 3RT19 36-1CC00 3RT10 3. RC elements 3RT10 4. 24 … 48 AC 24 … 70 DC 48 … 127 AC 70 … 150 DC Siemens Industry, Inc. Industrial Controls Catalog 3RT10 3. Diode assemblies 24 DC 3RT19 36-1TR00 0.025 3RT10 4. for DC operation and short break times, can be plugged in at bottom 30 … 250 DC 3RT19 36-1TS00 0.025 Product Category: IEC 4/47 Combination Starters & Starters for Group Installation 3RA1 / 3RA2 Accessories SIRIUS • Revised • 09/30/14 Surge suppressors, link modules Selection and ordering data For MSP For contactors Actuating voltage of contactor Size Screw Terminals Pack Qty. Weight approx. Order No. kg Auxillary switch blocks for snapping on the front for contactors Electrical and mechanical link between motor starter protector and contactor Single-unit packaging 3RA29 11-2AA00 Multi-unit packaging S00, S0 S00 AC and DC 3RA19 21-1DA00 S00, S0 S0 AC 3RA29 21-1AA00 1 unit 0.028 S00, S0 S0 DC 3RA29 21-1BA00 1 unit 0.001 S2 S2 AC 3RA19 31-1AA00 1 unit 0.001 S3 S3 AC 3RA19 41-1AA00 1 unit 0.05 S2 S2 DC 3RA19 31-1BA00 1 unit 0.08 S3 S3 DC 3RA19 41-1BA00 1 unit 0.05 S00, S0 S00 AC and DC 3RA19 21-1D 10 unit 0.021 S00, S0 S00, S0 S0 S0 AC DC 3RA29 21-1A 3RA29 21-1B 10 unit 10 unit 0.001 0.001 0.040 Spring-type Terminals 3RA29 11-2AA00 Electrical and mechanical link between motor starter protector and contactor Order No. Single-unit packaging S00 S00 AC and DC 3RA29 11-2AA00 S0 S0 AC 1) and DC 3RA29 21-2AA00 1 unit Multi-unit packaging S00 S00 AC and DC 3RA29 11-2A 10 unit 0.400 AC 1) and DC 3RA29 21-2A 10 unit 0.770 S0 S0 Hybrid link modules from motor starter protector to contactor 3RA29 11-2FA00 For mechanical and electrical connection between motor starter protector with screw terminals and contactor with spring-type terminals 3RA29 11-2FA00 Single-unit S00 S00 AC and DC 1 unit 0.029 packaging 3RA29 21-2FA00 1 unit 0.056 S0 S0 AC 1) and DC Multi-unit packaging S00 S00 AC and DC 3RA29 11-2F 10 unit 0.290 S0 S0 AC 1) and DC 3RA29 21-2F 10 unit 0.560 For MSPs For soft starters Screw Terminals Pack Qty. Weight approx. Size Size Order No. kg Link modules from motor starter protector to soft starters Electrical and mechanical link between motor starter protector and soft starter Single-unit packaging S00/S0 S00/S0 3RA29 21-1BA00 1 unit 0.001 Multi-unit packaging S00/S0 S00/S0 3RA29 21-1B 10 unit 0.001 Spring-type Terminals Electrical and mechanical link between motor starter protector and soft starter Order No. 3RA29 11-2GA00 1) Single-unit packaging S00 S00 3RA29 11-2GA00 1 unit 0.038 S0 S0 3RA29 21-2GA00 1 unit 0.072 Multi-unit packaging S00 S00 3RA29 11-2G 10 unit 0.380 S0 S0 3RA29 21-2G 10 unit 0.720 A spacer for height compensation on AC contactors with spring-type terminals, size S0 is optionally available, see page 4/52. 4/48 Product Category: IEC Siemens Industry, Inc. Industrial Controls Catalog SIRIUS Combination Starters & Starters for Group Installation 3RA1 / 3RA2 Accessories • Revised • 09/30/14 Mounting kits for Fast Bus Accessories For Version Conductors Screw Terminals Size Order No. Pack Qty. Weight approx. kg Wiring kits for contactors Reversing S00 3RA29 13-2AA1 1 unit 0.001 3RA29 23-2AA1 1 unit 0.001 3RA19 33-2A 1 unit 0.120 3RA19 43-2A 1 unit 0.300 Wye-delta starting S00 Electrical and mechanical link for three contactors of same size S0 3RA29 13-2BB1 1 unit 0.001 3RA29 23-2BB1 1 unit 0.001 S2 3RA19 33-2B 1 unit 0.070 3RA19 43-2B 1 unit 0.160 3RA29 13-2AA2 1 unit 0.001 3RA29 23-2AA2 1 unit 0.001 3RA29 13-2BB2 1 unit 0.001 3RA29 23-2BB2 1 unit 0.001 3RA29 16-1A 1 unit 0.001 3RA29 26-1A 1 unit 0.001 S0 3RA29 23-2AA1 3RA29 23-2BB1 S2 S3 S3 Electrical and mechanical connection for reversing contactors, optionally with integrated electrical and mechanical interlock Mechanically locking device must be ordered seperately Electrical and mechanical link for three contactors of same size Spring-type Terminals Reversing S00 S0 3RA29 23-2AA2 Electrical and mechanical connection for reversing contactors, optionally with integrated electrical and mechanical interlock Wye-delta starting S00 Electrical and mechanical link for three contactors of same size S0 Screw Terminals Wiring kits for contactors Reversing S00 Switches 2 contactors in series S0 3RA29 16-1A Siemens Industry, Inc. Industrial Controls Catalog Product Category: IEC 4/49 Combination Starters & Starters for Group Installation 3RA1 / 3RA2 Accessories SIRIUS Mounting kits for Fast Bus Accessories For Conductors For MSPs Size Size Version Screw Terminals Pack Qty. Weight approx. Order No. kg Mechanical interlocks S2, S3 -- For reversing contactors, laterally fittable with 1 auxiliary contact (1 NC) each per contactor. 3RA19 24-2B 0.040 -- For A1 and A2 of reversing contactors (includes 2 x A1 and 1 x A2) 3RA19 23-3B 0.020 3RA19 24-2B Terminals for contactor coil S2, S3 3RA19 23-3B Standard mounting rail adapters For mechanical fixing of motor start protector and contactor; for snapping onto standard mounting rail or for screw fixing. 3RA29 22-1AA00 S00, S0 S00, S0 S2 S2 S3 S3 S00, S0 S00, S0 Single-unit packaging Multi-unit packaging Side modules for standard mountin rail adaptors S00 ...S3 S00 ...S3 For standard mountin rail adaptors 10 mm wide, 96 mm long, for widening standard mounting rail adaptors when using lateral auxiliary switches, For size S00 to S2: 2 units required. For size S3: 3 units required 3RA29 22-1AA00 1 unit 0.001 3RA19 31-1AA00 1 unit 0.020 3RA19 41-1AA00 1 unit 0.250 3RA29 22-1A 5 units 0.001 3RA19 02-1B 10 units 0.009 3RA29 23-1BB1 1 unit 0.001 3RA19 33-1B 1 unit 0.560 3RA19 43-1B 1 unit 0.810 1 unit 0.001 3RA19 02-1B RH assembly kits for reversing duty and standard rail mounting RH assembly kits for screw terminals 3RA29 23-1BB1 4/50 S0 S0 S2 S2 S3 S3 Comprising: • Wiring kits • 2 standard mounting rail adaptors • 2 connecting wedges Link modules may be ordered seperately. RH assembly kits for spring-type terminals Spring-type Terminals S0 3RA29 23-1BB2 S0 Comprising: • Wiring kits • 2 standard mounting rail adaptors • 2 connecting wedges • Spacers Link modules may be ordered seperately. Siemens Industry, Inc. Industrial Controls Catalog Combination Starters & Starters forfor Group Combination Starters & Starters GroupInstallation Installation 3RA13RA2 / 3RA2 Accessories SIRIUS Motor Starters SIRIUS Busbar adapters Accessories For For Version motor contactors starter protector Size Order No. Std. pack qty. Weight approx. kg Size Busbar adapters for 60 mm systems For flat copper profiles according to DIN 46433 Width: 12 mm and 30 mm Thickness: 5 mm and 10 mm also for T and double-T special profiles For motor starter protectors and contactors with screw terminals 8US12 515DT11 S00 S00 Rated current 16 A, 45 mm wide, 200 mm long 8US12 51-5DS10 1 unit 0.183 S0 S0 Rated current 32 A, 45 mm wide, 260 mm long 8US12 51-5NT10 1 unit 0.183 For motor starter protectors and contactors with spring-type terminals S00 S00 Rated current 16 A, 45 mm wide, 260 mm long 8US12 51-5DT11 1 unit 0.183 S0 S0 Rated current 32 A, 45 mm wide, 260 mm long 8US12 51-5NT11 1 unit 0.183 Device holders for lateral mounting onto busbar adapters for 60 mm system 8US12 505AS10 Spring-type terminals S00, S0 S00, S0 Up to 25 A, 45 mm wide, 200 mm long 8US12 50-5AS10 1 unit 0.183 S0 S0 Up to 40 A, 45 mm wide, 260 mm long 8US12 50-5AT10 1 unit 0.183 8US19 98-2BJ10 1 unit 0.023 8US19 98-1BA10 1 pack 0.183 8US19 98-1CA10 1 unit 0.183 1 unit 1 unit 1 unit 0.001 0.001 0.001 1 unit 1 unit 0.001 0.001 8US12 505AT10 Side modules for widening busbar adapters -- -- Including connecting wedges, for widening busbar adapters or device holders, 9 mm wide, 200 mm long Spacers for fixing the motor starter onto the busbar adapter -- S00, S0 (1 pack = 100 units) Vibration and shock kits for high vibration and shock loads -- S00, S0 RS assembly kits for reversing duty for 60 mm busbar systems RS assembly kits for screw terminals S00, S0 S0 S00 S00 S0 S0 Comprising: • Wiring kits • Busbar adapters • Device holders • 2 connecting wedges • Side modules Link modules must be ordered separately. 6 8US12 515DS10 Screw terminals Screw terminals 3RA29 13-1DB1 3RA29 23-1DB1 3RA29 23-1EB1 3RA29 23-1DB1 only Busbar adapter pictured RS assembly kits for spring-type terminals S00 S0 3RA29 23-1DB2 only Busbar adapter pictured S00 S0 Comprising: • Wiring kits • Busbar adapters • Device holders • 2 connecting wedges • Spacers • Side modules Link modules must be ordered separately. Siemens Industry, Inc. * YouCatalog can order this quantity or a multiple thereof. Industrial Controls Illustrations are approximate Spring-type terminals 3RA29 13-1DB2 3RA29 23-1DB2 4/51 SIRIUS Innovations Supplement 2012 6/27 Combination Starters& & Starters Group Installation Combination Starters Starters for for Group Installation 3RA1 / 3RA2 SIRIUS 3RA2Accessories Motor Starters SIRIUS Connecting Accessorieswedges, spaces, and tools For For Version motor contactors starter protector Size Std. pack qty. Weight approx. kg Size Connecting wedges 8US19 98-1AA00 Order No. For mechanical linking of busbar adapters and device holders or of standard mounting rail adapters (2 units per combination required) 8US19 98-1AA00 For height compensation on AC contactors size S0 with spring-type terminals Spring-type terminals Spacers S0 S0 S0 S0 Single-unit packaging Multi-unit packaging 100 units 0.100 3RA29 11-1CA00 3RA29 11-1C 1 unit 0.001 5 units 0.001 Std. pack qty. Weight approx. 3RA29 11-1CA00 Version Order No. kg Tools for opening spring-type terminals by hand 3RA29 08-1A Spring-type terminals Length approx. 200 mm, 3.0 mm x 0.5 mm, titanium gray/black, partially insulated 3RA29 08-1A Unit labeling plates1) for SIRIUS devices 20 mm x 7 mm, pastel turquoise 3RT19 00-1SB20 1 unit 0.045 340 units 0.200 NSB0_01429b 6 Blank labels Screwdrivers for all SIRIUS devices with spring-type terminals 3RT19 00-1SB20 1) PC labeling system for individual inscription of unit labeling plates available from: murrplastik Systems, Inc. www.murrplastik.com . Selection and ordering data For MSPs For Conductors Size Size Version Order No. Std. Pack Qty. Weight approx. kg Push-in lugs for screw fixing S00 -- 3RV29 28-0B For screwing the motor starter protector onto mounting plates; for each motor starter protector, 2 units are required. 10 units 0.100 3RV29 28-0B 4/52 6/28 SIRIUS Innovations Supplement 2012 Siemens Industry, Inc. * You can order this quantity or a multiple thereof. Industrial Controls Catalog Illustrations are approximate SIRIUS Combination Starters & Starters for Group Installation Components for IEC types of coordination 1 and 2 at AC 500 V ■ Technical data Three-phase standard motor1) 4-pole at AC 500 V Standard output P Motor current (guide value) I kW A Setting range Inverse-time delayed overload release Motor starter protector Contactor2) Type Type Size A IEC Type of coordination 1 at Iq = 50 kA/AC 400 V Normal starting Class 10 1.5 2.2 3 3.6 4.9 6.5 3.5 ... 5 4.5 ... 6.3 5.5 ... 8 3RV20 11-1FA10 3RV20 11-1GA10 3RV20 11-1HA10 3RT20 15-1AP00 4 5.5 7.5 8.5 11.5 15.5 7 ... 10 9 ... 12.5 11 ... 16 3RV20 11-1JA10 3RV20 11-1KA10 3RV20 11-4AA10 3RT20 16-1AP01 3RT20 17-1AP01 3RT20 18-1AP01 S00 IEC Type of coordination 2 at Iq = 50 kA/AC 400 V Normal starting Class 10 0.06 0.06 0.09 0.09 0.12 0.18 0.18 0.25 0.37 0.55 0.75 0.75 1.1 1.5 0.2 0.2 0.3 0.3 0.4 0.6 0.6 0.85 1.1 1.5 1.9 1.9 2.7 3.6 0.14 ... 0.2 0.18 ... 0.25 0.22 ... 0.32 0.28 ... 0.4 0.35 ... 0.5 0.45 ... 0.63 0.55 ... 0.8 0.7 ... 1 0.9 ... 1.25 1.1 ... 1.6 1.4 ... 2 1.8 ... 2.5 2.2 ... 3.2 2.8 ... 4 3RV20 11-0BA10 3RV20 11-0CA10 3RV20 11-0DA10 3RV20 11-0EA10 3RV20 11-0FA10 3RV20 11-0GA10 3RV20 11-0HA10 3RV20 11-0JA10 3RV20 11-0KA10 3RV20 11-0AA10 3RV20 11-1BA10 3RV20 11-1CA10 3RV20 11-1DA10 3RV20 11-1EA10 3RT20 15-1AP01 S00 1.5 2.2 3 4 5.5 3.6 4.9 6.5 8.5 11.5 3.5 ... 5 4.5 ... 6.3 5.5 ... 8 7 ... 10 9 ... 12.5 3RV20 11-1FA10 3RV20 11-1GA10 3RV20 11-1HA10 3RV20 11-1JA10 3RV20 11-1KA10 3RT20 24-1AP01 S0 7.5 7.5 15.5 15.5 11 ... 16 14 ... 20 3RV20 21-4AA10 3RV20 21-4BA10 3RT20 26-1AP01 11 11 15 22 22 29 17 ... 22 20 ... 35 27 ... 32 3RV20 21-4CA10 3RV20 21-4DA10 3RV20 21-4EA10 3RT20 27-1AP01 1) Selection depends on the actual startup and rated data of the protected motor. Siemens Industry, Inc. Industrial Controls Catalog 2) Rated control supply voltage 120 V AC. Other voltages are possible. 4/53 Combination Starters & Starters for Group Installation SIRIUS Components for IEC types of coordination 1 and 2 at AC 500 V ■ Technical data Three-phase standard motor1) 4-pole at AC 500 V Standard output P Motor current (guide value) I kW A Setting range Inverse-time delayed overload release Motor starter protector Contactor2) Type Type Size A IEC Type of coordination 1 at Iq = 50 kA/AC 500 V Normal starting Class 10 15 18.5 22 30 30 23 28 33 44 44 18 ... 25 22 ... 32 28 ... 40 36 ... 45 40 ... 50 3RV1031-4DA10 3RV1031-4EA10 3RV1031-4FA10 3RV1031-4GA10 3RV1031-4HA10 3RT10 34-1AK60 3RT10 34-1AK60 3RT10 35-1AK60 3RT10 36-1AK60 3RT10 36-1AK60 S2 37 45 55 53 64 78 45 ... 63 57 ... 75 70 ... 90 3RV1041-4JA10 3RV1041-4KA10 3RV1041...4LA10 3RT10 44-1AK60 3RT10 44-1AK60 3RT10 45-1AK60 S3 IEC Type of coordination 2 at Iq = 50 kA/AC 500 V Normal starting Class 10 7.5 11 15 18.5 22 30 30 12.4 17.6 23 23 33 44 44 11 ... 16 14 ... 20 18 ... 25 22 ... 32 28 ... 40 36 ... 45 40 ... 50 3RV10 31-4AA10 3RV10 31-4BA10 3RV10 31-4DA10 3RV10 31-4EA10 3RV10 31-4FA10 3RV10 31-4GA10 3RV10 31-4HA10 3RT10 34-1AK60 3RT10 34-1AK60 3RT10 34-1AK60 3RT10 34-1AK60 3RT10 35-1AK60 3RT10 36-1AK60 3RT10 36-1AK60 S2 37 45 55 53 64 78 45 ... 63 57 ... 75 70 ... 90 3RV10 31-4JA10 3RV10 31-4KA10 3RV10 31-4LA10 3RT10 44-1AK60 3RT10 44-1AK60 3RT10 45-1AK60 S3 1) Selection depends on the actual startup and rated data of the protected motor. 4/54 2) Rated control supply voltage 120 V AC. Other voltages are possible. Siemens Industry, Inc. Industrial Controls Catalog Combination Starters & Starters for Group Installation SIRIUS Components for IEC types of coordination 1 and 2 at AC 690 V ■ Technical data Three-phase standard motor 4-pole at AC 690 V3) Standard output Motor current (guide value) P I kW A Setting range MSP Standard IEC circuit-breaker with limiting function Subsequent MSP Contactor1) Type Type Type Size A Short-circuit switching capacity Iq at 690 V kA IEC Types of coordination 1 and 2 at AC 690 V Normal starting Class 10 11 15 18.5 22 12.8 17 21 24 11 14 18 22 ... ... ... ... 16 20 25 32 30 37 45 32 39 47 28 36 40 ... 40 ... 45 ... 50 3RV13 31-4HC10 Size S2 In = 50 A 3RV10 31-4AA10 3RV10 31-4BA10 3RV10 31-4DA10 3RV10 31-4EA10 3RT10 34-1AK60 3RT10 34-1AK60 3RT10 35-1AK60 3RT10 35-1AK60 S2 50 3RV10 31-4FA10 3RV10 31-4GA10 3RV10 31-4HA10 3RT10 44-1AK602) 3RT10 44-1AK602) 3RT10 45-1AK602) S2/S3 50 Installation guidelines for AC 400/500 V The following distances from earthed components must be observed when installing combinations: Distances from earthed or live parts Z Z Y Motor starter protectors in combination with contactors MSP Z mm Rated operational voltage 3RV2. 1 with 3RT20 1 400/500 V 20 10 9 3RV2. 2 with 3RT20 1 3RT2 . 2 3RT1 . 3 400/500 V 400/500 V 400/500 V 30 30 30 10 10 10 9 9 9 3RV1. 3 with 3RT20 2 3RT1 . 3 3RT10 4 400/500 V 400/500 V 400/500 V 50 50 50 10 10 10 10 10 10 3RT10 4 3RT10 4 400 V 500 V 90 220 10 10 12 20 3RV1. 4 with Y mm X24) mm Contactor 1L1 3L2 5L3 3RV2... 3RV2... 2T1 4T2 6T3 1L1 3L2 5L3 3RT2... X2 3RT2... 2T1 4T2 6T3 No upstream circuit-breaker required; short-circuit proof up to 100 kA. Siemens Industry, Inc. Industrial Controls Catalog 1) Rated control supply voltage 120 V AC. Other 3) voltages are possible. 2) With these combinations, the distance between 4) the subsequent MSP and the contactor must be at least 10 cm. Selection depends on the specific startup and rated data of the protected motor. Minimum distance to contactor at front. For the MSP, no minimum distance at the front must be maintained. 4/55 Combination Starters & Starters for Group Installation SIRIUS 3RA1 / 3RA2 up to 100 A ■ Technical data Installation guidelines for AC 690 V Size Mounting method S0 Mounting on an insulated base plate. If screws are used for fixing, the screws must not be earthed. Alternatively, the standard rail adapter can be used for all units. S2/S3 Standard surface mounting for sizes S0 up to 5.5 kW, S2 and S3 Surface mounting for sizes S0 from 7.5 to 11 kW 3-phase busbar Size S0: 3RV29 15-1A Size S2: 3RV19 35-1A Mounting on an insulated base plate. Alternatively, the standard rail adapter can also be used without restriction. Connection module See accessories The following distances from earthed components must be observed when installing combinations: Two MSPs in combination with contactors Distances from earthed or live components MSP Contactor Rated operational voltage Y1 mm Y2 mm Y3 mm X1 mm X2 mm Z mm 3RV2. 2 with 3RT20 2 690 V 80 10 95 20 14 20 3RV1. 3 with 3RT10 3 3RT10 4 690 V 690 V 50 50 10 10 120 120 10 10 32 40 10 10 a 3-phase busbar: Size S0: 3RV29 15-1A Size S2: 3RV19 35-1A 4/56 b In combination with size S2 MSPs and size S3 contactors, a spacing of 100 mm must be maintained. Siemens Industry, Inc. Industrial Controls Catalog SIRIUS Combination Starters & Starters for Group Installation 3RA1 / 3RA2 up to 100 A ■ Technical data General data Specifications IEC 60 947-1, EN 60 947-1 (VDE 0660 Part 100) IEC 60 947-2, EN 60 947-2 (VDE 0660 Part 101) IEC 60 947-4-1, EN 60 947-4-1 (VDE 0660 Part 102) Type Size Number of poles 3RA2. 1 S00 3 3RA2. 2 S0 3 3RA1. 3 S2 3 3RA11 4 S3 3 40 50 100 Max. rated current I nmax (= max. rated operational current I e) A 16 Permissible ambient temperature °C °C –55 ... +80 for storage/transport –20 ... +70 for operation (restrictions apply at more than +60 °C) Rated operational voltage Ue Rated frequency Rated insulation voltage Ui Rated impulse withstand voltage Uimp V Hz V kV 690 50/60 690 6 Release class (CLASS) 10 acc. to IEC 60 947-4-1, EN 60 947-4-1 (VDE 0660 Part 102) Rated fused short-circuit current I q at 50/60 Hz AC 400 V acc. to IEC 60 947-4-1, DIN EN 60 947-4-1 (VDE 0660 Part 102) Types of coordination to IEC 60 947-4-1, EN 60 947-4-1 (VDE 0660 Part 102) kA Power losses Pv max of all main conducting paths depending on the rated current I n (upper current setting range) W W W W W W W W W W W W W 2 2.3 3.5 4.3 VA 27 0.8 4.2 0.25 4 65 0.82 8.5 0.25 5.9 0.8 - 1.1 x Us 0.8 x Us 0.85 x Us – – • • • • • • • Up to 1.25 A 1.6 - 6.3 A 8 - 12 A 16 A 56.3 A 8 - 12 A 16 - 32 A 25 - 32 A 40 A 45 - 50 A 63 A 75 - 90 A 100 A Power consumption of solenoid coils (with cold coil and Us, 50 Hz) AC operation closing p.f. closed p.f. DC operation closing = closed Coil voltage tolerance for contactors low limit 153 50 1) VA W at 55 °C at 60 °C 2.3 3.5 4.3 19 28 35 127 0.82 13.5 0.34 11.50 Endurance of MSP Mechanical endurance Electrical endurance Max. switching frequency per hour (motor starts) operating cycles operating cycles 1/h 100 000 100 000 15 Endurance of contactor Mechanical endurance Electrical endurance operating cycles operating cycles 30 million 10 million See endurance curves of contactors in Part 3. Shock resistance (sine-wave pulse) acc. to IEC 60 068 Part 2-27 Degree of protection acc. to IEC 60 947-1 g up to 6 29 45 60 270 0.68 22 0.27 15 50 000 50 000 15 up to 6 IP 20 up to 8 up to 6 IP 20 IP 00 terminal chamber Shock-hazard protection acc. to DIN VDE 0106 Part 100 Finger-safe Phase failure sensitivity of MSP acc. to IEC 60 947-4-1, EN 60 947-4-1 (VDE 0660 Part 102) yes Isolating characteristics of MSP Main and EMERGENCY-STOP switch characteristics of MSP and accessories acc. to IEC 60 947-2, EN 60 947-2 (VDE 0660 Part 101) acc. to IEC 60 204-1, EN 60 204-1 (VDE 0113 Part 1) yes yes, with undervoltage release up to category 1 in proper use. Safe isolation between main and acc. to DIN VDE 0160 Part 101 auxiliary circuits up to 400 V Positively driven operation at contactors yes yes, from main contact to auxiliary NC contact 1) See selection and ordering data on pages 4/36 to 4/43. Siemens Industry, Inc. Industrial Controls Catalog 4/57 Combination Starters & Starters for Group Installation 3RA1 / 3RA2 up to 100 A SIRIUS Technical data Conductor cross-sections of main circuit Specifications IEC 60 947-1, EN 60 947-1 (VDE 0660 Part 100) IEC 60 947-2, EN 60 947-2 (VDE 0660 Part 101) IEC 60 947-4-1, EN 60 947-4-1 (VDE 0660 Part 102) Type Size Number of poles 3RA2. 1 S00 3 3RA2. 2 S0 3 3RA1. 3 S2 3 3RA11 4 S3 3 Connection type Terminal screw Screw terminal M3 Posidrive size 2 Screw terminal M3 Posidrive size 2 Box terminals Posidrive size 2 Box terminals Allen screw mm2 mm2 0.75/25 0.75/16 2.5/501) 2.5/351) mm2 mm2 0.75/35 0.75/25 yes – 2 x (30 ... 2) – 2.5/701) 2.5/501) yes yes – 2 x (10 ... 1/0) Conductor cross-sections (min./max) 1 or 2 conductors can be connected • solid and stranded mm2 mm2 mm2 2 x (0.5 … 1.5) 2) only for contactors 2 x (0.75 … 2.5 ) 2) max. 2 x 4 • Finely stranded without end sleeve mm2 – • Finely stranded with end sleeves (DIN 46 228 T1) mm2 2 x (0.5 ... 1.5) 2) 2 x (0.75 ... 2.5) 2) • AWG cables, solid or stranded AWG AWG AWG 2 x (20 ... 16) 2) 2 x (18 ... 14) 2 x 12 Minimum/maximum conductor cross-sections flexible with ferrule - 1 conductor - 2 conductors solid or stranded - 1 conductor - 2 conductors Ribbon cable Bus connection solid or stranded stranded AWG AWG Connection type Spring Loaded connection mm2 AWG 2 x (0.5 ... 2.5) 2 x (20 ... 12) – Permissible mounting position Attention: acc. to DIN 43 602 Start command “I” right-hand or above 1) Cable-lug and busbar connection possible after removing the box terminals. 4/58 2) If two different conductor cross-sections are connected to one clamping point, both cross-sections must lie in the range specified. If identical cross-sections are used, this restriction does not apply. Siemens Industry, Inc. Industrial Controls Catalog Combination Starters & Starters for Group Installation SIRIUS 3RA1 / 3RA2 up to 100 A ■ Overview The 3RA combination starters consist of the 3RV MSP and the 3RT contactor. MSP and contactor are prewired and mechanically connected with preassembled kits (link modules, connection assembly kits and mounting rail or busbar adapters). As the 3RA combination starters are constructed from 3RV MSPs and 3RT contactors, the same accessories can be used for the combination starter as for these MSPs and contactors. Pre-assembled link modules are available as accessories for the power spectrum up to 75 HP. The desired combination starter can thus be assembled quickly and economically by the customer. A time saving is also achieved with the link modules as – unlike with conventional wiring systems – there is no need to rectify possible wiring errors. As a combination starter rated for tap conductor protection for group installation the 3RV MSP is responsible for overload and short-circuit protection in the motor circuit. Back-up protective devices, such as fuses or SIEMENS Sentron circuit breakers are required as per NEC 430-53 guidelines for group installations for multiple motor applications The 3RT contactor is ideal for extremely complex switching tasks requiring durable components. The permissible ambient temperature is 60 °C with buttmounting and without derating (70 °C possible subject to certain restrictions). 3RA combination starters are available for motors up to 75 Hp at 460 V AC and setting ranges from 0.14 A to 100 A. 3RA combination starters are supplied in four different sizes: Size S00 S0 S2 S3 Overall Max. width rated current In max mm A For threephase motors up to HP 45 45 55 70 8 22 50 100 5 15 40 75 Siemens Industry, Inc. Industrial Controls Catalog Operating conditions 3RA combination starters are climate-proof. They are intended for use in enclosed rooms in which no severe conditions (such as dust, caustic vapors, hazardous gases) prevail. Suitable enclosures must be provided for installation in dusty and damp locations. ■ Accessories The accessories for the special equipment, such as auxiliary contacts and undervoltage trips, can also be used for the 3RA combination starters. In addition, certain accessories have been optimized for the combination starters. They include the top-connected, transverse auxiliary contact on the MSP with one changeover contact or one NO contact + one NC contact. Special auxiliary contact blocks that can be snapped on from below are available for the contactor. These two accessories enable the combination starters to be wired easily without having to route cables via the equipment. The special accessories for 3RA combination starters take the form of link modules for 3RV MSPs and 3RT contactors. ■ Technical data For technical data, see pages 4/56-4/58. Additional details are contained in the respective tables for the 3RV MSPs and 3RT contactors. ■ Configuration Overload tripping times All the 3RA combination starters described here are designed for normal starting, in other words for overload tripping times of less than 10 s (CLASS 10). At rated-load operating temperature the tripping times are shorter, depending on the particular equipment and the setting range. The exact values can be derived from the tripping characteristics of the MSPs. Classification types DIN VDE 0660 Part 102 and IEC 60 947-4-1 make a distinction between two different types of coordination (types 1 and 2). Any short-circuits that occur are cleared safely by both types of coordination. The only differences concern the extent of the damage caused to the equipment by a short-circuit. IEC Type of coordination 1 The combination starter may be non-operational after a short-circuit has been cleared. Damage to the contactor or to the overload relay is permissible. In 3RA load feeders, the MSP itself always achieves type of coordination 2. IEC Type of coordination 2 There must be no damage to the overload trip or to any other components after a short-circuit has been cleared. The 3RA combination starter can resume operation without needing to be be renewed. At most, it is permissible to weld the contactor contacts if they can be disconnected easily without any significant deformation. ■ Mounting Complete equipment The 3RA combination starters can be ordered as complete equipment for direct starting or for reversing mode. Control supply voltages of 50 Hz AC 230 V or DC 24 V and assembly on a 35 mm standard mounting rail or in a 40 or 60 mm busbar system are possible. Special equipment for customer assembly can be ordered if other rated control supply voltages are required. The link modules simplify customer assembly of the load feeders. The corresponding distances from earthed or live parts, as detailed in the technical data, must be observed. Customer assembly The standard devices can be combined optimally in terms of both technical data and dimensions, thanks to the modular system of the SIRIUS series. The combination starters can thus be assembled easily by the customer. It is simply necessary to assemble the standard 3RV MSP and 3RT contactor and the appropriate link module together. For the order numbers for special equipment and link modules, see the selection and ordering data. For the link modules for direct starting or reversing mode and assembly on a standard mounting rail or busbar, see accessories. If a MSP with a rotary operating mechanism is required for the lower setting ranges up to 12 A, the S0 MSP can also be assembled with an S00 contactor. A special connecting module is available for this purpose. For the installation of feeders, it is imperative to use standard rail adapters, as from size S2 for direct starting and as from size S0 for reversing, to ensure the necessary mechanical strength. A standard rail adapter is not necessary if a busbar adapter is used. Assembly 3RA combination starters are available for assembly on standard mounting rails in accordance with EN 50 022-35 x 15 or on busbar adapters with a busbar centre-line spacing of 40 or 60 mm and a busbar thickness of 5 or 10 mm. The combination starters are also suitable for screw fixing. Size S00 S00 and and S0 S0 can can be be screwed on with with the the aid aid of plugin (see accessories accessorieson on in clips clips (see page 4/47). page 4/47). 4/59 Combination Starters & Starters for Group Installation SIRIUS 3RA1 / 3RA2 up to 100 A Mounting Direct-on-line starting • For standard rail mounting or screw fixing • Sizes S00 and S0 2 push-in lugs 3RV29 28-0B (only for screw mounting) 2 push-in lugs 3RV29 28-0B (only for screw mounting) 2 push-in lugs 3RV29 28-0B (only for screw mounting) Motor starter protector Size S00/S0 Screw terminals Motor starter protector Size S00/S0 Spring-type terminals Motor starter protector Size S00/S0 Screw terminals Link module 3RA19 21-1DA00 (for S00) 3RA29 21-1AA00 (for S0, AC contactor) 3RA29 21-1BA00 (for S0, DC contactor) Link module 3RA29 11-2AA00 for S00 3RA29 21-2AA00 for S0 Link module 3RA29 11-2FA00 for S00 3RA29 21-2FA00 for S0 Contactor Size S00/S0 Screw terminals Contactor Size S00/S0 Spring-type terminals Contactor Size S00/S0 Spring-type terminals NSB0_02089 Left: 3RA21 motor starter with screw connection Center: 3RA21 motor starter with spring-type connection Right: Motor starter protector combination with screw connection, with contactor with spring-type connection DOL starting · for standard rail mounting · size S2 and S3 MSP Size S2 3RA19 32-1AA00 mounting rail adapter MSP Size S3 Link module for AC: 3RA19 31-1AA00 for DC: 3RA19 31-1BA00 Link module for AC: 3RA19 41-1AA00 for DC: 3RA19 41-1BA00 Contactor Size S2 Contactor Size S3 3RA19 42-1AA00 mounting rail adapter These graphical overviews are shown without small mounting hardware (screws etc.). 4/60 Siemens Industry, Inc. Industrial Controls Catalog SIRIUS Combination Starters & Starters for Group Installation 3RA1 / 3RA2 up to 100 A ■ Mounting DOL starting · for 60 mm busbar systems · size S00 and S0 60 mm busbar adapter for spring-type terminals 8US12 51-5DT11 for S00 8US12 51-5NT11 for S0 60 mm busbar adapter for screw terminals 8US12 51-5DS10 for S00 8US12 51-5NT10 for S0 Motor starter protector Size S00/S0 Screw terminals Motor starter protector Size S00/S0 Spring-type terminals NSB0_02091a Link module 3RA19 21-1DA00 for S00 3RA29 21-1AA00 for S0, AC contactor 3RA29 21-1BA00 for S0, DC contactor Link module 3RA29 11-2AA00 for S00 3RA29 21-2AA00 for S0 Contactor Size S00/S0 Screw terminals Contactor Size S00/S0 Spring-type terminals 1) Additional 3RA29 11-1CA00 spacer for height compensation on AC contactors size S0 with spring-type terminals. DOL starting · for 40 mm and 60 mm busbar systems · size S2 Busbar adapter 60 mm: 8US12 61-5FP08 MSP Size S2 Link module for AC: 3RA19 31-1AA00 for DC: 3RA19 31-1BA00 Contactor Size S2 These graphical overviews are shown without small mounting hardware (screws etc.). Siemens Industry, Inc. Industrial Controls Catalog 4/61 Combination Starters & Starters for Group Installation 3RA1 / 3RA2 up to 100 A SIRIUS ■ Mounting Reversing duty • For standard rail mounting or screw fixing • Size S00 2 push-in lugs 3RV29 28-0B (only for screw mounting) 2 push-in lugs 3RV29 28-0B (only for screw mounting) Motor starter protector Size S00 Screw terminals Motor starter protector Size S00 Spring-type terminals Link module 3RA19 21-1DA00 for S00 Link module 3RA29 11-2AA00 for S00 1 1 3 2 contactors Size S00 Screw terminals 3 NSB0_02092a 4 4 2 Wiring kit 3RA29 13-2AA1 1 Upper wiring module 2 Lower wiring module 3 2 connecting clips 4 Mechanical interlock (can be removed if necessary) 2 contactors Size S00 Spring-type terminals 2 Wiring kit 3RA29 13-2AA2 1 Upper wiring module 2 Lower wiring module 3 2 connecting clips 4 Mechanical interlock (can be removed if necessary) Left: 3RA22 motor starter with screw connection, push-in lugs, 2 contactors for reversing duty and 3RA29 13-2AA1 wiring kit for connecting the contactors (incl. mechanical interlocking and connecting clips) Right: 3RA22 motor starter with spring-type connection, push-in lugs, 2 contactors for reversing duty and 3RA29 13-2AA2 wiring kit (incl. mechanical interlocking and connecting clips) 4/62 Siemens Industry, Inc. Industrial Controls Catalog SIRIUS Combination Starters & Starters for Group Installation 3RA1 / 3RA2 up to 100 A ■ Mounting Reversing duty • For standard rail mounting • Size S0 RH assembly kit for reversing duty and standard rail mounting in size S0 For screw terminals: 3RA29 23-1BB1 For spring-type terminals: 3RA29 23-1BB2 1) Comprising: 1 wiring kit 2 standard mounting rail adapters 2 connecting wedges 1) Also includes 3RA29 11-1CA00 spacer for height compensation on AC contactors size S0 with spring-type terminals. Motor starter protector Size S0 Screw terminals/ spring-type terminals 2 standard mounting rail adapters 3RA29 22-1AA00 with 2 connecting wedges 8US19 98-1AA00 Link module For screw terminals: 3RA29 21-1AA00 (AC) 3RA29 21-1BA00 (DC) For spring-type terminals: 3RA29 21-2AA00 2) 1 NSB0_02093b 3 2 contactors Size S0 Screw terminals/ spring-type terminals 4 2 2) Additional 3RA29 11-1CA00 spacer for height compensation on AC contactors size S0 with spring-type terminals 3RA22 motor starter for reversing duty and standard rail mounting in size S0 (the version with screw connection is shown in the picture) Siemens Industry, Inc. Industrial Controls Catalog Wiring kit For screw terminals: 3RA29 23-2AA1 For spring-type terminals: 3RA29 23-2AA2 1 Upper wiring module 2 Lower wiring module 3 2 connecting clips 4 Mechanical interlock (can be removed if necessary) 4/63 Combination Starters & Starters for Group Installation 3RA1 / 3RA2 up to 100 A SIRIUS ■ Mounting Reversing duty · for standard rail mounting · size S2 Assembly kit (RH) for reversing duty for rail mounting 3RA19 33-1B consisting of: 1 wiring kit 2 adapters for rail mounting 2 side modules 4 link wedges MSP size S2 2 contactors size S2 Mechanical interlock 3RA19 24-2B Link module for AC: 3RA19 31-1AA00 for DC: 3RA19 31-1BA00 Adapters for rail mounting 3RA19 32-1AA00 3RA19 02-1B side modules for adapter for rail mounting Link wedges 8US19 98-1AA00 Wiring kit 3RA19 33-2A upper wiring module lower wiring module Reversing duty · for standard rail mounting · size S3 Assembly kit (RH) for reversing duty for rail mounting 3RA19 43-1B consisting of: 1 wiring kit 2 adapters for rail mounting 3 side modules 6 link wedges MSP size S3 2 contactors size S3 Mechanical interlock 3RA19 24-2B Link module for AC: 3RA19 41-1AA00 for DC: 3RA19 41-1BA00 Adapters for rail mounting 3RA19 42-1AA00 3RA19 02-1B side modules for adapter for rail mounting Link wedges 8US19 98-1AA00 These graphical overviews are shown without small mounting hardware (screws etc.). 4/64 Wiring kit 3RA19 43-2A upper wiring module lower wiring module Siemens Industry, Inc. Industrial Controls Catalog SIRIUS Combination Starters & Starters for Group Installation 3RA1 / 3RA2 up to 100 A ■ Mounting Reversing duty • For 60 mm busbar systems • Sizes S00 and S0 RS assembly kit for reversing duty and busbar mounting Screw connection: 3RA29 13-1DB1 for S00 3RA29 23-1DB1 for S0 For spring-type connection: 3RA29 13-1DB2 for S00 1) 3RA29 23-1DB2 for S0 Comprising: 1 wiring kit 1 busbar adapter 1 device holder 2 connecting wedges 1) 60 mm busbar adapter For screw terminals: 8US12 51-5DS10 for S00 8US12 51-5NT10 for S0 For spring-type terminals: 8US12 51-5DT11 for S00 8US12 51-5NT11 for S0 Also includes 3RA29 11-1CA00 spacer for height compensation on AC contactors size S0 with spring-type terminals. 2 connecting wedges 8US19 98-1AA00 Motor starter protector Size S00/S0 Screw terminals/ spring-type terminals Link module For screw terminals: 3RA19 21-1DA00 for S00 3RA29 21-1AA00 for S0, AC contactor 3RA29 21-1BA00 for S0, DC contactor For spring-type terminals: 2) 3RA29 11-2AA00 for S00 1 3RA29 21-2AA00 for S0 60 mm device holder 8US12 51-5AS10 NSB0_02094b 3 2 contactors Size S00/S0 Screw terminals/ spring-type terminals 4 2 2) Additional 3RA29 11-1CA00 spacer for height compensation on AC contactors size S0 with spring-type terminals. 3RA22 motor starter for reversing duty and 60 mm standard mounting rail in size S00/S0 (the version with screw connection is shown in the picture) Siemens Industry, Inc. Industrial Controls Catalog Wiring kit Screw connection: 3RA29 13-2AA1 for S00 3RA29 23-2AA1 for S0 Spring-type connection: 3RA29 13-2AA2 for S00 3RA29 23-2AA2 for S0 1 Upper wiring module 2 Lower wiring module 3 2 connecting clips 4 Mechanical interlock (can be removed if necessary) 4/65 Combination Starters & Starters for Group Installation 3RA1 / 3RA2 up to 100 A SIRIUS ■ Mounting Reversing duty · for 60 mm busbar systems · size S2 Assembly kit (RS) for reversing duty for busbar mounting 40 mm: 3RA19 33-1C 60 mm: 3RA19 33-1D consisting of: 1 wiring kit 1 busbar adapter 1 controlgear support 1 side module 2 link wedges Link module for AC: 3RA19 31-1AA00 for DC: 3RA19 31-1BA00 Mechanical interlock 3RA19 24-2B Link wedges 8US19 98-1AA00 Controlgear support 60 mm: 8US12 60-5AP00 with side module 8US19 98-2BM00 for busbar adapter Busbar adapter 60 mm: 8US12 61-5FP08 MSP Size S2 2 contactors Size S2 Wiring kit 3RA19 33-2A upper wiring module lower wiring module These graphical overviews are shown without small mounting hardware (screws etc.). 4/66 Siemens Industry, Inc. Industrial Controls Catalog SIRIUS Combination Starters & Starters for Group Installation 3RA1 / 3RA2 up to 100 A Components for Fast Bus mounting Link module for AC: 3RA19 41-1A for DC: 3RA19 41-1B Mechanical interlock 3RA19 24-2B 3RV104 with Reversing 3RT104 Adapter shoe 8US1211-4TR00 MSP 3RV104 3RA1943-2A Wiring kit Upper wiring module Lower wiring module 2 Brackets FBS0070B 2 Contactors 3RT104 Circuit diagrams Direct-on-line starting Size S00: 3RA21.1 Sizes S0, S2 and S3: 3RA11/21 2, 3RA11/21 3 Reversing duty Size S00: 3RA22 Siemens Industry, Inc. Industrial Controls Catalog Size S0: 3RA22 4/67 Combination Starters & Starters for Group Installation SIRIUS 3RA1 / 3RA2 up to 100 A ■ Dimension drawings Size S00 · for standard rail mounting S0 direct-on-line starter, AC, screw-type connection system 3RA2120-..A S0/S0 and S00/S0 reversing starters, AC, screw-type connection system 3RA2220-..B..-0AP0 Size S00 · for 40 mm and 60 mm busbar systems S0/S0 and S00/S0 direct-on-line starters, AC, screw-type connection system 3RA2120-..D..-0AP0 S0/S0 and S00/S0 reversing starters, AC, screw-type connection system 3RA2220-..D..-0AP0 When mounting mountingthe thecombinations, combinations,observe observe the installation guidelines (page 4/60-4/61). When the installation guidelines (page 4/60-4/61). 4/68 Siemens Industry, Inc. Industrial Controls Catalog SIRIUS Combination Starters & Starters for Group Installation 3RA1 / 3RA2 up to 50 A ■ Dimension drawings Size S0 · for standard rail mounting S0 direct-on-line starter, AC, screw-type connection system 3RA2120-..A S0/S0 and S00/S0 reversing starters, AC, screw-type connection system 3RA2220-..B..-0AP0 Size S0 · for 40 mm and 60 mm busbar systems S0/S0 and S00/S0 direct-on-line starters, AC, screw-type connection system 3RA2120-..D..-0AP0 S0/S0 and S00/S0 reversing starters, AC, screw-type connection system 3RA2220-..D..-0AP0 When mounting the combinations, observe the installation guidelines (page 4/60-4/61). When mounting the combinations, observe the installation guidelines (page 4/60-4/61). Siemens Industry, Inc. Industrial Controls Catalog 4/69 Combination Starters & Starters for Group Installation 3RA1 / 3RA2 up to 50 A SIRIUS ■ Dimension drawings Size S2 · for standard rail mounting Direct-on-line starting Reversing duty 1) Alternative fixing methods a) 2 35 mm mounting rails acc. to DIN EN 50 022 Spacing: 125 mm Depth: 7.5 or 15 mm. b) 1 75 mm mounting rail acc. to DIN EN 50 023. Size S2 · for 40 mm and 60 mm busbar systems Direct-on-line starting Reversing duty 1) Busbar adapter suitable for rail thicknesses of 5 and 10 mm with chamfered edges. When thecombinations, combinations,observe observethe the installation guidelines (page 4/60-4/61). When mounting mounting the installation guidelines (page 4/58). 4/70 Siemens Industry, Inc. Industrial Controls Catalog SIRIUS Combination Starters & Starters for Group Installation 3RA1 / 3RA2 up to 100 A ■ Dimension drawings Size S3 · for standard rail mounting Direct-on-line starting Reversing duty 1) Alternative fixing methods a) 2 35 mm mounting rails acc. to DIN EN 50 022 Spacing: 125 mm Depth: 7.5 or 15 mm. b) 1 75 mm mounting rail acc. to DIN EN 50 023. When observe thethe installation guidelines (page 4/60guidelines and 4/64).4/60-4/64). When mounting mountingthe thecombinations, combinations, observe installation guidelines (page Siemens Industry, Inc. Industrial Controls Catalog 4/71 Combination Starters & Starters for Group Installation SIRIUS Notes 4/72 Siemens Industry, Inc. Industrial Controls Catalog