MPS4124 Amplifier Transistor NPN Silicon Features • Pb−Free Packages are Available* http://onsemi.com COLLECTOR 3 MAXIMUM RATINGS Rating Symbol Value Unit Collector −Emitter Voltage VCE 25 Vdc Collector −Base Voltage VCB 30 Vdc Emitter −Base Voltage VEB 5.0 Vdc Collector Current − Continuous IC 200 mAdc Total Device Dissipation @ TA = 25°C Derate above 25°C PD 625 5.0 W mW/°C Total Device Dissipation @ TC = 25°C Derate above 25°C PD 1.5 12 W mW/°C TJ, Tstg −55 to +150 °C Operating and Storage Junction Temperature Range 2 BASE 1 EMITTER 1 THERMAL CHARACTERISTICS Characteristic Symbol Thermal Resistance, Junction−to−Ambient Thermal Resistance, Junction−to−Case Max Unit RqJA 200 °C/W RqJC 83.3 °C/W TO−92 CASE 29 STYLE 1 2 3 BENT LEAD TAPE & REEL AMMO PACK Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. MARKING DIAGRAM MPS 4124 AYWW G G A = Assembly Location Y = Year WW = Work Week G = Pb−Free Package (Note: Microdot may be in either location) ORDERING INFORMATION Device Package Shipping† MPS4124RLRA TO−92 2000/Tape & Reel TO−92 (Pb−Free) 2000/Tape & Reel MPS4124RLRAG *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. © Semiconductor Components Industries, LLC, 2007 April, 2007 − Rev. 4 1 †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. Publication Order Number: MPS4124/D MPS4124 ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristic Symbol Min Max 25 − 30 − 5.0 − − 50 − 50 120 60 360 − − 0.3 − 0.95 170 − − 4.0 − 13.5 120 480 − 5.0 Unit OFF CHARACTERISTICS Collector −Emitter Breakdown Voltage (IC = 1.0 mA, IB = 0) V(BR)CEO Collector −Base Breakdown Voltage (IC = 10 mA, IE = 0) V(BR)CBO Emitter −Base Breakdown Voltage (IC = 0, IE = 10 mA) V(BR)EBO Collector Cutoff Current (VCB = 20 V, IE = 0) ICBO Emitter Cutoff Current (VEB = 3.0 V, IC = 0) IEBO Vdc Vdc Vdc nAdc nAdc ON CHARACTERISTICS DC Current Gain (IC = 2.0 mA, VCE = 1.0 V) (IC = 50 mA, VCE = 1.0 V) hFE Collector −Emitter Saturation Voltage (IC = 50 mA, IB = 5.0 mA) VCE(sat) Base −Emitter Saturation Voltage (IC = 50 mA, IB = 5.0 mA) VBE(sat) − Vdc Vdc SMALL−SIGNAL CHARACTERISTICS Current −Gain − Bandwidth Product (IC = 10 mA, VCE = 20 V, f = 100 MHz) fT Output Capacitance (VCB = 5.0 V, IE = 0, f = 1.0 MHz) Cob Input Capacitance (VEB = 0.5 V, IC = 0, f = 1.0 MHz) Cib Small−Signal Current Gain (IC = 2.0 mA, VCE = 1.0 V, f = 1.0 kHz) hfe Noise Figure (IC = 100 mA, VCE = 5.0 V, RS = 1.0 kW, f = 1.0 kHz) NF http://onsemi.com 2 MHz pF pF − dB MPS4124 PACKAGE DIMENSIONS TO−92 (TO−226) CASE 29−11 ISSUE AM A B STRAIGHT LEAD BULK PACK R P L SEATING PLANE K D X X G J H V C SECTION X−X 1 N NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. DIM A B C D G H J K L N P R V INCHES MIN MAX 0.175 0.205 0.170 0.210 0.125 0.165 0.016 0.021 0.045 0.055 0.095 0.105 0.015 0.020 0.500 −−− 0.250 −−− 0.080 0.105 −−− 0.100 0.115 −−− 0.135 −−− MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.407 0.533 1.15 1.39 2.42 2.66 0.39 0.50 12.70 −−− 6.35 −−− 2.04 2.66 −−− 2.54 2.93 −−− 3.43 −−− N A R BENT LEAD TAPE & REEL AMMO PACK B P NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. T SEATING PLANE K D X X G J V 1 C SECTION X−X DIM A B C D G J K N P R V MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.40 0.54 2.40 2.80 0.39 0.50 12.70 −−− 2.04 2.66 1.50 4.00 2.93 −−− 3.43 −−− N STYLE 1: PIN 1. EMITTER 2. BASE 3. COLLECTOR ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5773−3850 http://onsemi.com 3 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MPS4124/D