Planar Ultrafast Rectifier 5A, 600V, TO-220F-2FS

Ordering number : ENA1390A
RD0506LS-SB
Planar Ultrafast Rectifier
http://onsemi.com
5A, 600V, TO-220F-2FS
Features
•
•
•
High breakdown voltage (VRRM=600V)
Easy to be mounted, good heat dissipation
Low noise at the time of reverse recovery
High reliability
Reverse recovery time is fast
Halogen free compliance
•
•
•
Specifications
Absolute Maximum Ratings at Ta=25°C
Parameter
Symbol
Repetitive Peak Reverse Voltage
VRRM
Average Output Current
Surge Forward Current
IO
IOP
IFSM
Junction Temperature
Tj
Storage Temperature
Tstg
Peak Output Current
Conditions
Ratings
Unit
PW≤100μs, duty cycle≤50%
Sine wave, 10ms 1pulse
600
V
5
A
20
A
120
A
150
°C
--55 to +150
°C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating
Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
Electrical Characteristics at Ta=25°C
Parameter
Symbol
Reverse Voltage
Forward Voltage
Reverse Current
Reverse Recovery Time
Thermal Resistance
VR
VF
IR
IR=1mA
IF=5A
trr
Rth(j-c)
IF=5A, di / dt=100A/μs
min
600
V
1.3
1.6
V
50
μA
50
6.25
ns
°C / W
Ordering & Package Information
4.7
10.16
3.18
2.54
Device
Package
Shipping
memo
RD0506LS-SB-1H
TO-220F-2FS,
SC-67
TO-220Full pack,
2-Lead
50pcs./
tube
Pb-Free
and
Halogen Free
RD0506LS-SB-1H
6.68
Marking
Electrical Connection
2
15.87
15.8
Unit
max
Between the junction part and the case smoothing current
unit : mm (typ)
7532-001
3.23
typ
VR=600V
Package Dimensions
3.3
Ratings
Conditions
1.28
2.76
0.8 MAX
*
LOT No.
12.98
1.47 MAX
0.8
RD0506
1
1
2
0.5
part is not a metal
* : This
but a resin
5.08
1 : Cathode
2 : Anode
TO-220F-2FS
Semiconductor Components Industries, LLC, 2013
May, 2013
52913 TKIM TC00002911/10709SA MSIM TC-00001788 No. A1390-1/5
RD0506LS-SB
IF -- VF
Junction Capacitance, Cj -- pF
1.0
7
5
3
2
--40
°C
0°C
70°
C
25°
C
0.1
7
5
3
2
0.01
7
5
3
2
0
0.2
0.4
0.6
0.8
1.0
1.2
Forward Voltage, VF -- V
100
7
5
3
2
1.4
Current waveform 50Hz sine wave
120
IS
20ms
t
110
100
90
80
70
60
0.01
2
3
5
7 0.1
2
3
Time, t -- s
5
7
0.1
1.6
2
7 1.0
2
3
IT14316
3
2
5 7 1.0
3
5 7 10
2
3
5 7 100
IT14315
2 3
5 7 10
IT17037
Reverse Voltage, VR -- V
IT14314
IFSM -- t
130
Surge Forward Current, IFSM(Peak) -- A
f=100kHz
10
Transient Thermal Resistance, Rth(j-c) -- °C / W
0.001
Cj -- VR
3
2
Ta=
12
Forward Current, IF -- A
10
7
5
3
2
Rth(j-c) -- t
7
5
3
2
1.0
7
0.1
0.001 2 3
5 70.01
2 3
5 7 0.1
2 3
Time, t -- s
5 7 1.0
No. A1390-2/5
RD0506LS-SB
Magazine Specification
RD0506LS-SB-1H
No. A1390-3/5
RD0506LS-SB
Outline Drawing
RD0506LS-SB-1H
Mass (g) Unit
1.8
mm
* For reference
No. A1390-4/5
RD0506LS-SB
ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at
www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no
warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the
application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental
damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual
performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical
experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use
as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in
which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for
any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors
harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or
death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the
part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PS No. A1390-5/5