Data Sheet

Freescale Semiconductor
Technical Data
Document Number: MRF6S27015N
Rev. 2, 12/2008
RF Power Field Effect Transistors
MRF6S27015NR1
MRF6S27015GNR1
N - Channel Enhancement - Mode Lateral MOSFETs
Designed for CDMA base station applications with frequencies from 2000 to
2700 MHz. Suitable for WiMAX, WiBro, BWA, and OFDM multicarrier Class
AB and Class C amplifier applications.
• Typical Single - Carrier W - CDMA Performance: VDD = 28 Volts, IDQ =
160 mA, Pout = 3 Watts Avg., f = 2600 MHz, Channel Bandwidth =
3.84 MHz, PAR = 8.5 dB @ 0.01% Probability on CCDF.
Power Gain — 14 dB
Drain Efficiency — 22%
ACPR @ 5 MHz Offset — - 45 dBc in 3.84 MHz Channel Bandwidth
• Capable of Handling 5:1 VSWR, @ 28 Vdc, 2600 MHz, 15 Watts CW
Output Power
Features
• Characterized with Series Equivalent Large - Signal Impedance Parameters
• Internally Matched for Ease of Use
• Qualified Up to a Maximum of 32 VDD Operation
• Integrated ESD Protection
• 225°C Capable Plastic Package
• RoHS Compliant
• In Tape and Reel. R1 Suffix = 500 Units per 24 mm, 13 inch Reel.
2300 - 2700 MHz, 3 W AVG., 28 V
SINGLE W - CDMA
LATERAL N - CHANNEL
RF POWER MOSFETs
CASE 1265 - 09, STYLE 1
TO - 270 - 2
PLASTIC
MRF6S27015NR1
CASE 1265A - 03, STYLE 1
TO - 270 - 2 GULL
PLASTIC
MRF6S27015GNR1
Table 1. Maximum Ratings
Symbol
Value
Unit
Drain - Source Voltage
Rating
VDSS
- 0.5, +68
Vdc
Gate - Source Voltage
VGS
- 0.5, +12
Vdc
Storage Temperature Range
Tstg
- 65 to +150
°C
TC
150
°C
TJ
225
°C
Symbol
Value (2,3)
Unit
Case Operating Temperature
Operating Junction Temperature
(1,2)
Table 2. Thermal Characteristics
Characteristic
Thermal Resistance, Junction to Case
Case Temperature 80°C, 7.5 W Avg., Two - Tone
Case Temperature 79°C, 3 W CW
RθJC
2.0
2.2
°C/W
1. Continuous use at maximum temperature will affect MTTF.
2. MTTF calculator available at http://www.freescale.com/rf. Select Software & Tools/Development Tools/Calculators to access
MTTF calculators by product.
3. Refer to AN1955, Thermal Measurement Methodology of RF Power Amplifiers. Go to http://www.freescale.com/rf.
Select Documentation/Application Notes - AN1955.
© Freescale Semiconductor, Inc., 2006-2008. All rights reserved.
RF Device Data
Freescale Semiconductor
MRF6S27015NR1 MRF6S27015GNR1
1
Table 3. ESD Protection Characteristics
Test Methodology
Class
Human Body Model (per JESD22 - A114)
1A (Minimum)
Machine Model (per EIA/JESD22 - A115)
A (Minimum)
Charge Device Model (per JESD22 - C101)
IV (Minimum)
Table 4. Moisture Sensitivity Level
Test Methodology
Per JESD 22 - A113, IPC/JEDEC J - STD - 020
Rating
Package Peak Temperature
Unit
3
260
°C
Table 5. Electrical Characteristics (TC = 25°C unless otherwise noted)
Characteristic
Symbol
Min
Typ
Max
Unit
Zero Gate Voltage Drain Leakage Current
(VDS = 68 Vdc, VGS = 0 Vdc)
IDSS
—
—
10
μAdc
Zero Gate Voltage Drain Leakage Current
(VDS = 28 Vdc, VGS = 0 Vdc)
IDSS
—
—
1
μAdc
Gate - Source Leakage Current
(VGS = 5 Vdc, VDS = 0 Vdc)
IGSS
—
—
500
nAdc
Gate Threshold Voltage
(VDS = 10 Vdc, ID = 40 μAdc)
VGS(th)
1.5
2.2
3.5
Vdc
Gate Quiescent Voltage
(VDS = 28 Vdc, ID = 160 mAdc)
VGS(Q)
—
2.8
—
Vdc
Fixture Gate Quiescent Voltage (1)
(VDD = 28 Vdc, ID = 160 mAdc, Measured in Functional Test)
VGG(Q)
2.2
3.1
4.4
Vdc
Drain - Source On - Voltage
(VGS = 10 Vdc, ID = 0.4 Adc)
VDS(on)
—
0.27
0.4
Vdc
Reverse Transfer Capacitance
(VDS = 28 Vdc ± 30 mV(rms)ac @ 1 MHz, VGS = 0 Vdc)
Crss
—
11.6
—
pF
Output Capacitance
(VDS = 28 Vdc ± 30 mV(rms)ac @ 1 MHz, VGS = 0 Vdc)
Coss
—
22.9
—
pF
Off Characteristics
On Characteristics
Dynamic Characteristics (2)
Functional Tests (3) (In Freescale Test Fixture, 50 ohm system) VDD = 28 Vdc, IDQ = 160 mA, Pout = 3 W Avg., f = 2600 MHz, Single - Carrier
W - CDMA, 3.84 MHz Channel Bandwidth Carriers. ACPR measured in 3.84 MHz Channel Bandwidth @ ±5 MHz Offset. PAR = 8.5 dB @
0.01% Probability on CCDF.
Power Gain
Gps
12.5
14
16
dB
Drain Efficiency
ηD
19
22
—
%
ACPR
—
- 45
- 42
dBc
IRL
—
- 18
-9
dB
Adjacent Channel Power Ratio
Input Return Loss
1. VGG = 11/10 x VGS(Q). Parameter measured on Freescale Test Fixture, due to resistive divider network on the board. Refer to Test Circuit
schematic.
2. Part internally input matched.
3. Measurement made with device in straight lead configuration before any lead forming operation is applied.
MRF6S27015NR1 MRF6S27015GNR1
2
RF Device Data
Freescale Semiconductor
R1
VBIAS
VSUPPLY
+
R2
C11
C1
C2
C4
Z7
C7
C8
Z18
RF
INPUT
R3
Z1
Z2
Z3
Z4
Z5
Z8
Z9
Z10
Z11
Z12
Z14
Z13
Z15
Z16
Z6
C3
Z17
RF
OUTPUT
C6
Z19
DUT
VSUPPLY
C5
Z1
Z2
Z3
Z4
Z5
Z6
Z7
Z8
Z9
Z10
0.503″
0.905″
0.371″
0.041″
0.245″
0.248″
0.973″
0.085″
0.091″
0.138″
x 0.066″
x 0.066″
x 0.300″
x 0.016″
x 0.851″
x 0.851″
x 0.050″
x 0.485″
x 0.667″
x 0.816″
Microstrip
Microstrip
x 0.049″ Taper
Microstrip
Microstrip
Microstrip
Microstrip
Microstrip
Microstrip
Microstrip
Z11
Z12
Z13
Z14
Z15
Z16
Z17
Z18
Z19
PCB
C9
C10
0.143″ x 0.816″ Microstrip
0.101″ x 0.667″ Microstrip
0.073″ x 0.485″ Microstrip
0.120″ x 0.021″ Microstrip
0.407″ x 0.170″ Microstrip
0.714″ x 0.066″ Microstrip
0.496″ x 0.066″ Microstrip
0.475″ x 0.050″ Microstrip
0.480″ x 0.050″ Microstrip
Taconic RF - 35, 0.030″, εr = 3.5
Figure 1. MRF6S27015NR1(GNR1) Test Circuit Schematic
Table 6. MRF6S27015NR1(GNR1) Test Circuit Component Designations and Values
Part
Description
Part Number
Manufacturer
C1
100 nF Chip Capacitor
CDR33BX104AKYS
Kemet
C2
4.7 pF Chip Capacitor
ATC100B4R7BT500XT
ATC
C3
9.1 pF Chip Capacitor
ATC100B9R1BT500XT
ATC
C4, C5, C6
8.2 pF Chip Capacitors
ATC100B8R2BT500XT
ATC
C7, C8, C9, C10
10 μF, 50 V Chip Capacitors
GRM55DR61H106KA88L
Murata
C11
10 μF, 35 V Tantalum Chip Capacitor
T491D106K035AT
Kemet
R1
1 KΩ, 1/4 W Chip Resistor
CRCW12061001FKEA
Vishay
R2
10 KΩ,1/4 W Chip Resistor
CRCW12061002FKEA
Vishay
R3
10 Ω, 1/4 W Chip Resistor
CRCW120610R0FKEA
Vishay
MRF6S27015NR1 MRF6S27015GNR1
RF Device Data
Freescale Semiconductor
3
C11
R2
C1
C4
C2
R1
C7
C8
R3
C6
CUT OUT AREA
C3
C9
C10
C5
MRF6S27015N Rev. 3
Figure 2. MRF6S27015NR1(GNR1) Test Circuit Component Layout
MRF6S27015NR1 MRF6S27015GNR1
4
RF Device Data
Freescale Semiconductor
15
23
Gps, POWER GAIN (dB)
14
13
12
Gps
22
ηD
IRL
11
10
21
VDD = 28 Vdc, Pout = 3 W (Avg.)
IDQ = 160 mA, Single−Carrier W−CDMA
20
3.84 MHz Channel Bandwidth, PAR = 8.5 dB
@ 0.01% Probability (CCDF)
−30
−40
ACPR
9
−50
ALT1
8
−60
2500 2520 2540 2560 2580 2600 2620 2640 2660 2680 2700
−5
−10
−15
−20
−25
IRL, INPUT RETURN LOSS (dB)
24
ACPR (dBc), ALT1 (dBc)
16
ηD, DRAIN
EFFICIENCY (%)
TYPICAL CHARACTERISTICS
f, FREQUENCY (MHz)
Figure 3. Single - Carrier W - CDMA Broadband Performance
@ Pout = 3 Watts Avg.
Gps, POWER GAIN (dB)
30
ηD
11
IRL
10
VDD = 28 Vdc, Pout = 6 W (Avg.)
IDQ = 160 mA, Single−Carrier W−CDMA
3.84 MHz Channel Bandwidth
PAR = 8.5 dB @ 0.01% Probability (CCDF)
29
28
−30
9
ACPR
−40
8
ALT1
−50
7
−60
2500 2520 2540 2560 2580 2600 2620 2640 2660 2680 2700
−5
−10
−15
−20
−25
IRL, INPUT RETURN LOSS (dB)
31
Gps
13
12
ηD, DRAIN
EFFICIENCY (%)
14
32
ACPR (dBc), ALT1 (dBc)
15
f, FREQUENCY (MHz)
Figure 4. Single - Carrier W - CDMA Broadband Performance
@ Pout = 6 Watts Avg.
−10
IDQ = 240 mA
Gps, POWER GAIN (dB)
190 mA
15
160 mA
14
130 mA
13
80 mA
VDD = 28 Vdc
f1 = 2592 MHz, f2 = 2605 MHz
Two−Tone Measurements
12
1
10
IMD, THIRD ORDER
INTERMODULATION DISTORTION (dBc)
16
VDD = 28 Vdc
f1 = 2595 MHz, f2 = 2605 MHz
Two−Tone Measurements
−15
−20
−25
IDQ = 80 mA
−30
240 mA
−35
−40
−45
190 mA
−50
130 mA
−55
160 mA
−60
1
10
Pout, OUTPUT POWER (WATTS) PEP
Pout, OUTPUT POWER (WATTS) PEP
Figure 5. Two - Tone Power Gain versus
Output Power
Figure 6. Third Order Intermodulation Distortion
versus Output Power
MRF6S27015NR1 MRF6S27015GNR1
RF Device Data
Freescale Semiconductor
5
−15
IMD, INTERMODULATION DISTORTION (dBc)
IMD, INTERMODULATION DISTORTION (dBc)
TYPICAL CHARACTERISTICS
VDD = 28 Vdc, IDQ = 160 mA
f1 = 2595 MHz, f2 = 2605 MHz
Two−Tone Measurements, 10 MHz Tone Spacing
−20
−25
−30
−35
3rd Order
−40
−45
−50
5th Order
−55
−60
7th Order
−65
1
−25
VDD = 28 Vdc, Pout = 15 W (PEP)
IDQ = 160 mA
−30
−35
IM3−U
IM3−L
Two−Tone Measurements
(f1 + f2)/2 = Center Frequency of 2600 MHz
−40
IM5−U
−45
IM5−L
IM7−U
−50
IM7−L
−55
−60
1
10
100
10
Pout, OUTPUT POWER (WATTS) PEP
TWO−TONE SPACING (MHz)
Figure 7. Intermodulation Distortion Products
versus Output Power
Figure 8. Intermodulation Distortion Products
versus Tone Spacing
50
Pout, OUTPUT POWER (dBm)
Ideal
P6dB = 44.3 dBm (27 W)
49
48
P3dB = 43.7 dBm (23 W)
47
46
45
P1dB = 43 dBm (20 W)
44
Actual
43
42
VDD = 28 Vdc, IDQ = 160 mA
Pulsed CW, 12 μsec(on), 1% Duty Cycle
f = 2600 MHz
41
40
26
27
28
29
30
31
32
33
34
35
36
Pin, INPUT POWER (dBm)
50
45
40
−20
VDD = 28 Vdc, IDQ = 160 mA, f = 2600 MHz
Single−Carrier W−CDMA, 3.84 MHz Channel
Bandwidth, PAR = 8.5 dB @ 0.01%
Probability (CCDF)
−25
−30
−35
35
−40
30
ALT1
25
ACPR
−45
ηD
−50
20
15
Gps
−55
ACPR (dBc), ALT1 (dBc)
ηD, DRAIN EFFICIENCY (%), Gps, POWER GAIN (dBc)
Figure 9. Pulsed CW Output Power versus
Input Power
−60
10
5
−65
1
10
Pout, OUTPUT POWER (WATTS) AVG.
Figure 10. Single - Carrier W - CDMA ACPR, ALT1, Power
Gain and Drain Efficiency versus Output Power
MRF6S27015NR1 MRF6S27015GNR1
6
RF Device Data
Freescale Semiconductor
TYPICAL CHARACTERISTICS
TC = −30_C
25_C
85_C
16
25_C
48
40
15
85_C
14
32
24
13
ηD
12
16
VDD = 28 Vdc
IDQ = 160 mA
f = 2600 MHz
11
14
12
28 V
VDD = 24 V
11
0
1
13
32 V
8
10
10
5
10
10
15
20
25
30
Pout, OUTPUT POWER (WATTS) CW
Pout, OUTPUT POWER (WATTS) CW
Figure 11. Power Gain and Drain Efficiency
versus CW Output Power
Figure 12. Power Gain versus Output Power
25
109
3
VDD = 28 Vdc, IDQ = 160 mA
WiMAX, 802.16, 64 QAM 3/4, 4 Bursts
7 MHz Channel Bandwidth, f = 2600 MHz
2.5
15
2
10
1.5
ηD
5
EVM
1
0.5
0
21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36
Pout, OUTPUT POWER (dBm)
Figure 13. Drain Efficiency and Error Vector
Magnitude versus Output Power
MTTF (HOURS)
ηD, DRAIN EFFICIENCY (%)
IDQ = 160 mA
f = 2600 MHz
56
Gps, POWER GAIN (dB)
Gps
−30_C
EVM, ERROR VECTOR MAGNITUDE (%)
Gps, POWER GAIN (dB)
17
20
15
64
ηD, DRAIN EFFICIENCY (%)
18
108
107
106
90
110
130
150
170
190
210
230
250
TJ, JUNCTION TEMPERATURE (°C)
This above graph displays calculated MTTF in hours when the device
is operated at VDD = 28 Vdc, Pout = 3 W Avg., and ηD = 22%.
MTTF calculator available at http://www.freescale.com/rf. Select
Software & Tools/Development Tools/Calculators to access MTTF
calculators by product.
Figure 14. MTTF versus Junction Temperature
MRF6S27015NR1 MRF6S27015GNR1
RF Device Data
Freescale Semiconductor
7
W - CDMA TEST SIGNAL
100
−10
3.84 MHz
Channel BW
−20
10
1
−40
−50
0.1
(dB)
PROBABILITY (%)
−30
W−CDMA. ACPR Measured in 3.84 MHz Channel
Bandwidth @ ±5 MHz Offset. PAR = 8.5 dB @
0.01% Probability on CCDF
0.01
−60
−70
0.001
−80
−ACPR in 3.84 MHz
Integrated BW
−90
0.0001
0
2
4
6
8
10
PEAK−TO−AVERAGE (dB)
Figure 15. CCDF W - CDMA 3GPP, Test Model 1,
64 DPCH, 67% Clipping, Single - Carrier Test Signal
−ACPR in 3.84 MHz
Integrated BW
−100
−110
−9
−7.2 −5.4 −3.6 −1.8
0
1.8
3.6
5.4
7.2
9
f, FREQUENCY (MHz)
Figure 16. Single - Carrier W - CDMA Spectrum
MRF6S27015NR1 MRF6S27015GNR1
8
RF Device Data
Freescale Semiconductor
Zo = 5 Ω
f = 2700 MHz
Zload
f = 2500 MHz
f = 2700 MHz
f = 2500 MHz
Zsource
VDD = 28 Vdc, IDQ = 160 mA, Pout = 3 W Avg.
f
MHz
Zsource
W
Zload
W
2500
4.059 - j2.284
3.380 - j0.543
2525
3.679 - j2.593
3.265 - j0.546
2550
3.006 - j2.574
3.077 - j0.449
2575
2.355 - j2.190
2.892 - j0.336
2600
2.075 - j1.657
2.727 - j0.182
2625
1.930 - j1.179
2.564 - j0.034
2650
1.973 - j0.771
2.435 + j0.140
2675
2.017 - j0.557
2.286 + j0.340
2700
2.024 - j0.379
2.227 + j0.538
Zsource = Test circuit impedance as measured from
gate to ground.
Zload
= Test circuit impedance as measured
from drain to ground.
Output
Matching
Network
Device
Under
Test
Input
Matching
Network
Z
source
Z
load
Figure 17. Series Equivalent Source and Load Impedance
MRF6S27015NR1 MRF6S27015GNR1
RF Device Data
Freescale Semiconductor
9
Table 7. Common Source Scattering Parameters (VDD = 28 V, IDQ = 160 mA, TC = 25°C, 50 ohm system)
f
MHz
MH
S11
S21
S12
S22
|S11|
∠φ
|S21|
∠φ
|S12|
∠φ
|S22|
∠φ
500
0.984
- 178.2
1.453
39.2
0.001
- 109.8
0.870
- 122.3
550
0.984
- 179.0
1.180
36.5
0.000
- 121.0
0.888
- 127.6
600
0.986
180.0
0.958
34.4
0.000
159.6
0.901
- 132.0
650
0.987
179.0
0.776
33.0
0.001
118.4
0.911
- 135.8
700
0.987
178.1
0.627
32.3
0.001
106.5
0.921
- 139.1
750
0.986
177.3
0.502
32.5
0.001
104.2
0.931
- 142.1
800
0.985
176.5
0.397
34.1
0.002
96.0
0.940
- 144.8
850
0.985
175.8
0.308
37.7
0.002
95.6
0.944
- 147.3
900
0.984
175.1
0.235
44.5
0.003
94.0
0.951
- 149.5
950
0.983
174.5
0.180
56.5
0.003
91.2
0.956
- 151.5
1000
0.982
173.8
0.146
75.6
0.003
91.2
0.962
- 153.4
1050
0.981
173.2
0.142
98.9
0.004
89.9
0.965
- 155.2
1100
0.980
172.5
0.163
118.0
0.004
89.2
0.969
- 156.8
1150
0.978
171.9
0.199
129.9
0.005
88.9
0.973
- 158.3
1200
0.976
171.2
0.243
136.6
0.005
87.4
0.976
- 159.8
1250
0.974
170.5
0.291
140.2
0.006
86.5
0.980
- 161.1
1300
0.970
169.8
0.342
141.8
0.006
86.3
0.983
- 162.4
1350
0.966
169.0
0.395
142.1
0.006
84.6
0.986
- 163.7
1400
0.960
168.3
0.452
141.5
0.006
84.8
0.988
- 164.9
1450
0.953
167.5
0.514
140.2
0.007
86.9
0.990
- 166.1
1500
0.945
166.6
0.580
138.4
0.007
92.5
0.993
- 167.3
1550
0.933
165.8
0.655
135.9
0.009
100.3
0.992
- 168.4
1600
0.918
164.9
0.738
132.5
0.011
93.7
0.994
- 169.4
1650
0.901
164.1
0.828
128.4
0.013
83.6
0.996
- 170.4
1700
0.879
163.2
0.925
123.5
0.014
75.4
0.997
- 171.6
1750
0.850
162.5
1.030
117.6
0.014
69.1
0.998
- 172.8
1800
0.815
162.2
1.139
110.8
0.015
62.8
0.995
- 173.9
1850
0.775
162.5
1.246
102.7
0.016
55.8
0.991
- 175.0
1900
0.734
164.0
1.337
93.6
0.016
48.2
0.984
- 176.0
1950
0.700
167.0
1.399
83.5
0.015
40.3
0.976
- 176.9
2000
0.683
171.0
1.420
73.1
0.015
33.2
0.966
- 177.6
2050
0.687
175.1
1.396
62.9
0.014
26.5
0.957
- 178.0
2100
0.710
178.5
1.338
53.4
0.012
22.1
0.951
- 178.3
2150
0.741
- 179.3
1.259
45.0
0.011
19.8
0.948
- 178.6
2200
0.774
- 178.2
1.169
37.6
0.010
19.7
0.947
- 178.9
2250
0.805
- 177.8
1.079
31.1
0.009
19.7
0.947
- 179.2
2300
0.832
- 177.9
0.993
25.8
0.008
19.6
0.948
- 179.5
2350
0.855
- 178.2
0.917
21.2
0.007
22.6
0.950
- 179.9
(continued)
MRF6S27015NR1 MRF6S27015GNR1
10
RF Device Data
Freescale Semiconductor
Table 7. Common Source Scattering Parameters (VDD = 28 V, IDQ = 160 mA, TC = 25°C, 50 ohm system) (continued)
f
MHz
MH
S11
S21
S12
S22
|S11|
∠φ
|S21|
∠φ
|S12|
∠φ
|S22|
∠φ
2400
0.873
- 178.8
0.848
17.2
0.006
31.2
0.953
179.7
2450
0.887
- 179.4
0.786
13.7
0.006
42.2
0.955
179.2
2500
0.897
- 179.9
0.731
10.6
0.007
45.6
0.956
178.7
2550
0.907
179.6
0.682
7.9
0.007
46.5
0.957
178.2
2600
0.914
179.1
0.639
5.5
0.007
48.0
0.958
177.8
2650
0.919
178.8
0.600
3.3
0.007
47.0
0.960
177.2
2700
0.926
178.3
0.566
1.3
0.007
45.8
0.962
176.8
2750
0.931
177.9
0.534
- 0.6
0.006
52.1
0.964
176.2
2800
0.936
177.4
0.505
- 2.2
0.006
62.3
0.965
175.7
2850
0.940
177.0
0.480
- 3.8
0.006
69.8
0.966
175.2
2900
0.942
176.6
0.457
- 5.2
0.007
73.2
0.967
174.7
2950
0.945
176.3
0.436
- 6.5
0.007
78.7
0.968
174.2
3000
0.947
175.8
0.416
- 7.6
0.008
85.1
0.969
173.8
3050
0.949
175.6
0.399
- 8.7
0.009
87.9
0.969
173.2
3100
0.950
175.1
0.382
- 9.6
0.011
88.2
0.970
172.9
3150
0.953
174.8
0.368
- 10.5
0.012
86.9
0.972
172.6
3200
0.955
174.5
0.355
- 11.5
0.014
85.1
0.974
172.1
MRF6S27015NR1 MRF6S27015GNR1
RF Device Data
Freescale Semiconductor
11
PACKAGE DIMENSIONS
MRF6S27015NR1 MRF6S27015GNR1
12
RF Device Data
Freescale Semiconductor
MRF6S27015NR1 MRF6S27015GNR1
RF Device Data
Freescale Semiconductor
13
MRF6S27015NR1 MRF6S27015GNR1
14
RF Device Data
Freescale Semiconductor
MRF6S27015NR1 MRF6S27015GNR1
RF Device Data
Freescale Semiconductor
15
MRF6S27015NR1 MRF6S27015GNR1
16
RF Device Data
Freescale Semiconductor
MRF6S27015NR1 MRF6S27015GNR1
RF Device Data
Freescale Semiconductor
17
PRODUCT DOCUMENTATION
Refer to the following documents to aid your design process.
Application Notes
• AN1907: Solder Reflow Attach Method for High Power RF Devices in Plastic Packages
• AN1955: Thermal Measurement Methodology of RF Power Amplifiers
Engineering Bulletins
• EB212: Using Data Sheet Impedances for RF LDMOS Devices
REVISION HISTORY
The following table summarizes revisions to this document.
Revision
Date
Description
0
Aug. 2006
• Initial Release of Data Sheet
1
June 2007
• Added Case Operating Temperature limit to the Maximum Ratings table and set limit to 150_C, p. 1
• Operating Junction Temperature increased from 200_C to 225_C in Maximum Ratings table, related
“Continuous use at maximum temperature will affect MTTF” footnote added and changed 200_C to
225_C in Capable Plastic Package bullet, p, 1
• Removed footnote and “Measured in Functional Test” from the RF test condition voltage callout for VGS(Q),
and added Fixture Gate Quiescent Voltage, VGG(Q) to On Characteristics table, p. 2
• VDS(on) Typ and Min values corrected in On Characteristics table, p. 2
• Output Capacitance Typ value corrected in Dynamic Characteristics table, p. 2
• Updated Part Numbers in Table 6, Component Designations and Values, to RoHS compliant part
numbers, p. 3
• Replaced Fig. 14, MTTF versus Junction Temperature with updated graph. Removed Amps2 and listed
operating characteristics and location of MTTF calculator for device, p. 7
• Fig. 15, CCDF W - CDMA 3GPP, Test Model 1, 64 DPCH, 50% Clipping, Single - Carrier Test Signal,
updated to remove IM3 measurement copy from callout in graph, p. 8
• Updated Fig. 16, Single - Carrier W - CDMA Spectrum, to correctly reflect integrated bandwidth offsets, p. 8
2
Dec. 2008
• Changed Typical Performance Full Frequency Band to f = 2600 MHz to match Functional Test specification,
p. 1
• Changed Storage Temperature Range in Max Ratings table from - 65 to +175 to - 65 to +150 for
standardization across products, p. 1
• Replaced Case Outline 1265 - 08 with 1265 - 09, Issue K, p. 1, 12 - 14. Corrected cross hatch pattern in
bottom view and changed its dimensions (D2 and E3) to minimum value on source contact (D2 changed
from Min - Max .290 - .320 to .290 Min; E3 changed from Min - Max .150 - .180 to .150 Min). Added JEDEC
Standard Package Number.
• Replaced Case Outline 1265A - 02 with 1265A - 03, Issue C, p. 1, 15 - 17. Corrected cross hatch pattern and
its dimensions (D2 and E2) on source contact (D2 changed from Min - Max .290 - .320 to .290 Min; E3
changed from Min - Max .150 - .180 to .150 Min). Added pin numbers. Corrected mm dimension L for
gull - wing foot from 4.90 - 5.06 Min - Max to 0.46 - 0.61 Min - Max. Added JEDEC Standard Package Number.
• Added footnote, Measurement made with device in straight lead configuration before any lead forming
operation is applied, to Functional Tests table, p. 2.
• Updated Part Numbers in Table 6, Component Designations and Values, to latest RoHS compliant part
numbers, p. 3
MRF6S27015NR1 MRF6S27015GNR1
18
RF Device Data
Freescale Semiconductor
How to Reach Us:
Home Page:
www.freescale.com
Web Support:
http://www.freescale.com/support
USA/Europe or Locations Not Listed:
Freescale Semiconductor, Inc.
Technical Information Center, EL516
2100 East Elliot Road
Tempe, Arizona 85284
1 - 800 - 521 - 6274 or +1 - 480 - 768 - 2130
www.freescale.com/support
Europe, Middle East, and Africa:
Freescale Halbleiter Deutschland GmbH
Technical Information Center
Schatzbogen 7
81829 Muenchen, Germany
+44 1296 380 456 (English)
+46 8 52200080 (English)
+49 89 92103 559 (German)
+33 1 69 35 48 48 (French)
www.freescale.com/support
Japan:
Freescale Semiconductor Japan Ltd.
Headquarters
ARCO Tower 15F
1 - 8 - 1, Shimo - Meguro, Meguro - ku,
Tokyo 153 - 0064
Japan
0120 191014 or +81 3 5437 9125
[email protected]
Asia/Pacific:
Freescale Semiconductor China Ltd.
Exchange Building 23F
No. 118 Jianguo Road
Chaoyang District
Beijing 100022
China
+86 10 5879 8000
[email protected]
For Literature Requests Only:
Freescale Semiconductor Literature Distribution Center
P.O. Box 5405
Denver, Colorado 80217
1 - 800 - 441 - 2447 or +1 - 303 - 675 - 2140
Fax: +1 - 303 - 675 - 2150
[email protected]
Information in this document is provided solely to enable system and software
implementers to use Freescale Semiconductor products. There are no express or
implied copyright licenses granted hereunder to design or fabricate any integrated
circuits or integrated circuits based on the information in this document.
Freescale Semiconductor reserves the right to make changes without further notice to
any products herein. Freescale Semiconductor makes no warranty, representation or
guarantee regarding the suitability of its products for any particular purpose, nor does
Freescale Semiconductor assume any liability arising out of the application or use of
any product or circuit, and specifically disclaims any and all liability, including without
limitation consequential or incidental damages. “Typical” parameters that may be
provided in Freescale Semiconductor data sheets and/or specifications can and do
vary in different applications and actual performance may vary over time. All operating
parameters, including “Typicals”, must be validated for each customer application by
customer’s technical experts. Freescale Semiconductor does not convey any license
under its patent rights nor the rights of others. Freescale Semiconductor products are
not designed, intended, or authorized for use as components in systems intended for
surgical implant into the body, or other applications intended to support or sustain life,
or for any other application in which the failure of the Freescale Semiconductor product
could create a situation where personal injury or death may occur. Should Buyer
purchase or use Freescale Semiconductor products for any such unintended or
unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor
and its officers, employees, subsidiaries, affiliates, and distributors harmless against all
claims, costs, damages, and expenses, and reasonable attorney fees arising out of,
directly or indirectly, any claim of personal injury or death associated with such
unintended or unauthorized use, even if such claim alleges that Freescale
Semiconductor was negligent regarding the design or manufacture of the part.
Freescalet and the Freescale logo are trademarks of Freescale Semiconductor, Inc.
All other product or service names are the property of their respective owners.
© Freescale Semiconductor, Inc. 2006-2008. All rights reserved.
MRF6S27015NR1 MRF6S27015GNR1
Document
Number:
RF
Device
Data MRF6S27015N
Rev. 2, 12/2008
Freescale
Semiconductor
19