SOT287-1

SO
32
SOT287-1
plastic small outline package; 32 leads; body width 7.5 mm
8 February 2016
Package information
1. Package summary
Terminal position code
D (double)
Package type descriptive code
SO32
Package type industry code
SO32
Package style descriptive code
SO (small outline)
Package style suffix code
NA (not applicable)
Package body material type
P (plastic)
JEDEC package outline code
MO-119
Mounting method type
S (surface mount)
Issue date
19-2-2003
Table 1. Package summary
Symbol
Parameter
Min
Typ
Nom
Max
Unit
D
package length
20.3
-
20.5
20.7
mm
E
package width
7.4
-
7.5
7.6
mm
A
seated height
[tbd]
-
2.65
2.65
mm
A2
package height
2.25
-
2.35
2.45
mm
n2
actual quantity of termination
-
-
32
-
SOT287-1
NXP Semiconductors
plastic small outline package; 32 leads; body
width 7.5 mm
2. Package outline
SO32: plastic small outline package; 32 leads; body width 7.5 mm
SOT287-1
D
E
A
X
c
y
HE
v M A
Z
17
32
Q
A2
pin 1 index
A
(A 3 )
A1
θ
Lp
L
16
1
0
detail X
w M
bp
e
5
10 mm
scale
DIMENSIONS (inch dimensions are derived from the original mm dimensions)
UNIT
A
max.
A1
A2
A3
bp
c
D (1)
E (1)
e
HE
L
Lp
Q
v
w
y
Z (1)
mm
2.65
0.3
0.1
2.45
2.25
0.25
0.49
0.36
0.27
0.18
20.7
20.3
7.6
7.4
1.27
10.65
10.00
1.4
1.1
0.4
1.2
1.0
0.25
0.25
0.1
0.95
0.55
0.01
0.02
0.01
0.011
0.007
0.81
0.80
0.30
0.29
0.05
0.419
0.394
inches
0.1
0.012 0.096
0.004 0.089
0.043
0.055
0.016
0.047
0.039
0.01
0.01
0.037
0.004
0.022
θ
o
8
o
0
Note
1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included.
OUTLINE
VERSION
SOT287-1
REFERENCES
IEC
JEDEC
JEITA
EUROPEAN
PROJECTION
ISSUE DATE
00-08-17
03-02-19
MO-119
Fig. 1. Package outline SO32 (SOT287-1)
SOT287-1
Package information
All information provided in this document is subject to legal disclaimers.
8 February 2016
©
NXP Semiconductors N.V. 2016. All rights reserved
2/6
SOT287-1
NXP Semiconductors
plastic small outline package; 32 leads; body
width 7.5 mm
3. Soldering
Footprint information for reflow soldering of SO32 package
SOT287-1
Hx
Gx
P2
(0.125)
Hy
(0.125)
Gy
By
Ay
C
D2 (4x)
D1
P1
Generic footprint pattern
Refer to the package outline drawing for actual layout
solder land
occupied area
DIMENSIONS in mm
P1
1.270
P2
Ay
1.320 11.200
By
C
D1
D2
6.400
2.400
0.700
Gx
0.800 20.200
Gy
Hx
Hy
8.600 22.100 11.450
sot287-1_fr
Fig. 2. Reflow soldering footprint for SO32 (SOT287-1)
SOT287-1
Package information
All information provided in this document is subject to legal disclaimers.
8 February 2016
©
NXP Semiconductors N.V. 2016. All rights reserved
3/6
SOT287-1
NXP Semiconductors
plastic small outline package; 32 leads; body
width 7.5 mm
enlarged solder land
solder lands
C
0.3 1.20
B
solder resist
A
F
occupied area
board direction
0.60
G
1.27((N- 2)x)
MLC745
Fig. 3. Wave soldering footprint for SO32 (SOT287-1)
SOT287-1
Package information
All information provided in this document is subject to legal disclaimers.
8 February 2016
©
NXP Semiconductors N.V. 2016. All rights reserved
4/6
SOT287-1
NXP Semiconductors
plastic small outline package; 32 leads; body
width 7.5 mm
4. Legal information
Disclaimers
Limited warranty and liability — Information in this document is believed
to be accurate and reliable. However, NXP Semiconductors does not give
any representations or warranties, expressed or implied, as to the accuracy
or completeness of such information and shall have no liability for the
consequences of use of such information. NXP Semiconductors takes no
responsibility for the content in this document if provided by an information
source outside of NXP Semiconductors.
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation lost profits, lost savings, business interruption, costs related to the removal
or replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of NXP Semiconductors.
Right to make changes — NXP Semiconductors reserves the right to
make changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
SOT287-1
Package information
All information provided in this document is subject to legal disclaimers.
8 February 2016
©
NXP Semiconductors N.V. 2016. All rights reserved
5/6
SOT287-1
NXP Semiconductors
plastic small outline package; 32 leads; body
width 7.5 mm
5. Contents
1. Package summary........................................................ 1
2. Package outline............................................................ 2
3. Soldering....................................................................... 3
4. Legal information......................................................... 5
©
NXP Semiconductors N.V. 2016. All rights reserved
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
Date of release: 8 February 2016
SOT287-1
Package information
All information provided in this document is subject to legal disclaimers.
8 February 2016
©
NXP Semiconductors N.V. 2016. All rights reserved
6/6