PDF Data Sheet

Analog Devices Welcomes
Hittite Microwave Corporation
NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
www.analog.com
www.hittite.com
THIS PAGE INTENTIONALLY LEFT BLANK
HMC499LC4
v05.0514
Amplifiers - Linear & Power - SMT
SMT PHEMT MEDIUM POWER AMPLIFIER
21 - 32 GHz
Typical Applications
Features
The HMC499LC4 is ideal for:
Output IP3: +34 dBm
• Point-to-Point Radios
Saturated Power: +24 dBm @ 16% PAE
• Point-to-Multi-Point Radios & VSAT
Gain: 17 dB
• Test Equipment & Sensors
Supply: +5V @ 200mA
• Military End-Use
50 Ohm Matched Input/Output
RoHS Compliant 4x4 mm SMT Package
General Description
Functional Diagram
The HMC499LC4 is a high dynamic range GaAs
PHEMT MMIC Medium Power Amplifier housed in a
leadless “Pb free” RoHS Compliant SMT package.
Operating from 21 to 32 GHz, the amplifier provides
16 dB of gain, +24 dBm of saturated power and 16%
PAE from a +5V supply voltage. The RF I/Os are
DC blocked and matched to 50 Ohms for ease of
use. The HMC499LC4 eliminates the need for wire
bonding, allowing use of surface mount manufacturing
techniques.
Electrical Specifications, TA = +25° C, Vdd1, 2, 3 = 5V, Idd = 200 mA*
Parameter
Min.
Frequency Range
Gain
14
Gain Variation Over Temperature
Min.
13
0.03
23
Max.
Min.
9
0.03
8
12
23
Max.
20
Units
GHz
13
0.02
8
20
Typ.
28 - 32
16
0.02
11
20
Typ.
24 - 28
10
Output Return Loss
Saturated Output Power (Psat)
Max.
17
0.02
Input Return Loss
Output Power for 1 dB Compression (P1dB)
Typ.
21 - 24
dB
0.03
dB/ °C
dB
8
dB
23
dBm
23.5
23.5
24
dBm
Output Third Order Intercept (IP3)
31
34
33.5
dBm
Noise Figure
6
5
5
dB
200
200
200
mA
Supply Current
(Idd)(Vdd = +5V, Vgg = -0.8V Typ.)
* Adjust Vgg between -2 to 0V to achieve Idd = 200 mA typical.
1
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC499LC4
v05.0514
SMT PHEMT MEDIUM POWER AMPLIFIER
21 - 32 GHz
Broadband Gain & Return Loss
Gain vs. Temperature
20
20
18
16
5
S21
0
S11
S22
GAIN (dB)
RESPONSE (dB)
10
-5
14
12
10
8
+25 C
+85 C
-40 C
6
-10
4
-15
2
-20
0
18
20
22
24
26
28
30
32
34
36
20
21 22 23
FREQUENCY (GHz)
28 29 30
31 32
33
Output Return Loss vs. Temperature
0
0
+25 C
+85 C
-40 C
-3
RETURN LOSS (dB)
-4
RETURN LOSS (dB)
27
FREQUENCY (GHz)
Input Return Loss vs. Temperature
-8
-12
-16
+25 C
+85 C
-40 C
-6
-9
-12
-20
-15
20
21 22 23
24 25 26
27
28 29 30
31 32
33
20
21 22 23
FREQUENCY (GHz)
24 25 26
27
28 29 30
31 32
33
31 32
33
FREQUENCY (GHz)
P1dB vs. Temperature
Psat vs. Temperature
30
30
26
26
Psat (dBm)
P1dB (dBm)
24 25 26
Amplifiers - Linear & Power - SMT
22
15
22
+25 C
+85 C
-40 C
18
14
22
+25 C
+85 C
-40 C
18
14
10
10
20
21 22 23
24 25 26
27
28 29 30
FREQUENCY (GHz)
31 32
33
20
21 22 23
24 25 26
27
28 29 30
FREQUENCY (GHz)
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
2
HMC499LC4
v05.0514
SMT PHEMT MEDIUM POWER AMPLIFIER
21 - 32 GHz
Output IP3 vs. Temperature
Noise Figure vs. Temperature
12
10
NOISE FIGURE (dB)
IP3 (dBm)
36
32
+25 C
+85 C
-40 C
28
24
6
4
0
20
21 22 23
24 25 26
27
28 29 30
31 32
33
20
21 22 23
24 25 26
FREQUENCY (GHz)
Gain, Power & Output IP3
vs. Supply Voltage @ 22 GHz
31 32
33
0
30
-10
28
ISOLATION (dB)
26
24
22
20
18
16
Gain
P1dB
Psat
IP3
14
12
-20
+25 C
+85 C
-40 C
-30
-40
-50
-60
-70
10
4.5
5
20
5.5
21 22 23
24 25 26
27
28 29 30
31 32
33
12
16
FREQUENCY (GHz)
Vdd Supply Voltage (Vdc)
Power Compression @ 30 GHz
28
24
Pout (dBm), GAIN (dB), PAE (%)
28
Pout (dBm), GAIN (dB), PAE (%)
28 29 30
Reverse Isolation vs. Temperature
32
Pout
Gain
PAE
20
16
12
8
4
0
-12
27
FREQUENCY (GHz)
Power Compression @ 22 GHz
-8
-4
0
4
INPUT POWER (dBm)
3
+25 C
+85 C
-40 C
8
2
20
Gain (dB), P1dB (dBm), Psat (dBm), IP3 (dBm)
Amplifiers - Linear & Power - SMT
40
8
12
24
Pout
Gain
PAE
20
16
12
8
4
0
-12
-8
-4
0
4
8
INPUT POWER (dBm)
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC499LC4
v05.0514
SMT PHEMT MEDIUM POWER AMPLIFIER
21 - 32 GHz
Drain Bias Voltage (Vdd1, Vdd2, Vdd3)
+5.5 Vdc
Gate Bias Voltage (Vgg)
-4 to 0 Vdc
RF Input Power (RFIN)(Vdd = +5 Vdc)
+20 dBm
Channel Temperature
175 °C
Continuous Pdiss (T= 85 °C)
(derate 25 mW/°C above 85 °C)
2.25 W
Thermal Resistance
(channel to ground paddle)
40 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
Typical Supply Current vs. Vdd
Vdd (Vdc)
Idd (mA)
+4.5
193
+5.0
200
+5.5
207
Note: Amplifier will operate over full voltage ranges shown
above. Vgg adjusted to achieve Idd= 200 mA at +5V.
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
Amplifiers - Linear & Power - SMT
Absolute Maximum Ratings
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA.
2. LEAD AND GROUND PADDLE PLATING: GOLD FLASH OVER NICKEL.
3. DIMENSIONS ARE IN INCHES (MILLIMETERS).
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
5. PACKAGE WARP SHALL NOT EXCEED 0.05MM DATUM – C –
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED
TO PCB RF GROUND.
Package Information
Part Number
Package Body Material
Lead Finish
HMC499LC4
Alumina, White
Gold over Nickel
MSL Rating
MSL3
[1]
Package Marking [2]
H499
XXXX
[1] Max peak reflow temperature of 260 °C
[2] 4-Digit lot number XXXX
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
4
HMC499LC4
v05.0514
SMT PHEMT MEDIUM POWER AMPLIFIER
21 - 32 GHz
Pin Descriptions
Amplifiers - Linear & Power - SMT
Pin Number
5
Function
Description
1, 5 - 8, 10 - 14,
18, 20, 22, 24
N/C
No connection required. These pins may be connected to RF/
DC ground without affecting performance.
2, 4, 15, 17
GND
Package bottom has an exposed metal paddle that must also
be connected to RF/DC ground.
3
RFIN
This pin is AC coupled
and matched to 50 Ohms.
9
Vgg
Gate control for amplifier. Adjust to achieve Id of 200 mA.
Please follow “MMIC Amplifier Biasing Procedure”
Application Note. External bypass capacitors of 100 pF,
1000 pF and 2.2 µF are required.
16
RFOUT
This pad is AC coupled
and matched to 50 Ohms.
23, 21, 19
Vdd1, Vdd2, Vdd3
Power Supply Voltage for the amplifier. External bypass
capacitors of 100 pF, 1000pF, and 2.2 µF are required.
Interface Schematic
Application Circuit
Component
Value
C1
100 pF
C2
1,000 pF
C3
2.2 µF
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC499LC4
v05.0514
SMT PHEMT MEDIUM POWER AMPLIFIER
21 - 32 GHz
Amplifiers - Linear & Power - SMT
Evaluation PCB
List of Material for Evaluation PCB 108537
Item
Description
J1, J2
2.92 mm PC mount K-connector
J3 - J8
DC Pin
C1 - C4
100 pF capacitor, 0402 pkg.
C5 - C8
1,000 pF Capacitor, 0603 pkg.
C9 - C12
2.2µF Capacitor, Tantalum
U1
HMC498LC4 Amplifier
PCB [2]
108535 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350.
[1]
The circuit board used in this application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown
is available from Hittite upon request.
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
6