WILLAS FM120-M+ THRU BAT54HT1 FM1200-M 200mA Surface Mount Schottky Barrier Rectifiers-30V 1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS -20V- 200V SOD-323 Package Pb Free Produ SOD-123+ PACKAGE Package outline Features • Batch process design, excellent power dissipation offers better reverse leakage current and thermal resistance. SOD-123H • Low profile surface mounted application in order to optimize board space. • Low power loss, high efficiency. These Schottky barrier diodes are designed for high speed switching • High current capability, low forward voltage drop. applications, circuit protection, and voltage clamping. Extremely low forward volt• High surge capability. age reduces conduction loss. Miniature surface mount package is excellent for for overvoltage protection. • Guardring hand held and portable applications where • Ultra high-speed switching. space is limited. • Extremely Switching Speed epitaxial planar chip, metal silicon junction. • SiliconFast • Low Forward Voltage — 0.35 Volts (Typ) @standards I F = 10 mAdc of • Lead-free parts meet environmental 0.146(3.7) 0.130(3.3) 0.012(0.3) Typ. 0.071(1.8) 0.056(1.4) MIL-STD-19500 • Device Marking: JV /228 product for packing code suffix • RoHS product for packing code suffix "G","G" •RoHS Halogen free product for packing code suffix "H" Halogen free product for packing code suffix "H" • Moisture Sensitivity Level 1 Mechanical data • Polarity: Color band denotes cathode end • Epoxy : UL94-V0 rated flame retardant SOD-323 0.040(1.0) 0.024(0.6) • Case : Molded plastic, SOD-123H , • Terminals :Plated terminals, solderable per MIL-STD-750 0.031(0.8) Typ. 0.031(0.8) Typ. MAXIMUM RATINGS (TJ =125°C Method 2026 unless otherwise noted ) Rating : Indicated by cathode band • Polarity Reverse Voltage Position : Any • Mounting Symbol VR Value 30 Unit V Dimensions in inches and (millimeters) 1 CATHODE • Weight : Approximated 0.011 gram THERMAL CHARACTERISTICS Characteristic Symbol Max Unit MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Total Device Dissipation FR-5 Board,* PD 200 mW Ratings at 25℃ ambient temperature unless otherwise specified. TA = 25°C Single phase half wave, 60Hz, resistive of inductive load. Derate above 25°C 1.57 mW/°C For capacitive load, derate current by 20% Thermal Resistance Junction to Ambient RθJA 635 °C/W SYMBOL FM120-MH RATINGS °CFM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-M -55FM130-MH to+125 FM140-MH Operating Temperature TJ Marking Code 12 13 14 16 18 10 115 120 StorageTemperature Tstg -55 to+150 °C 15 20 30 40 50 60 80 100 150 200 Maximum Recurrent Peak Reverse Voltage VRRM * FR-4 Minimum Pad Maximum RMS Voltage VRMS 14 21 28 35 42 56 70 105 140 Maximum DC Blocking Voltage VDC 20 30 40 50 60 80 100 150 200 Maximum Average Forward Rectified Current IFSM 1.0 30 Max — 40 10 120 Symbol Min Typ Unit 30 V(BR)R — Volts CJ CT — 7.6 pF 2.0 -55 to +125 Operating Temperature Range TJ Reverse Leakage (V R = 25 V) IR — 0.5 µAdc-55 to +150 - 65 to +175Vdc Storage Temperature Range TSTG Forward Voltage (I F = 0.1 mAdc) VF — 0.22 0.24 Forward Voltage (I F = 0.15 mAdc) VF — 0.24 0.26 Vdc FM130-MH FM150-MH FM160-MH FM180-MH CHARACTERISTICS Forward Voltage (I F = 0.15 mAdc, Tj =-25°C) SYMBOL FM120-MH VF —FM140-MH0.33 0.35 Vdc FM1100-MH FM1150-MH FM1200-M 0.9 Maximum Forward Voltage at 1.0A DC 0.92 V F 0.50 0.70 Forward Voltage (I F = 0.15 mAdc, Tj =85°C) VF — 0.16 0.18 Vdc0.85 0.5 Maximum Average Reverse Current at @T A=25℃ Forward Voltage (I F = 30 mAdc) VF — 0.41 0.5 Vdc IR @T A=125℃ Rated Forward DC Blocking Voltage Voltage (I F = 100 mAdc) VF — 0.52 1.0 10 Vdc Reverse Recovery Time NOTES: trr — — 5.0 ns (I F = I R = 10 mAdc, I R(REC) = 1.0 mAdc, Figure 1) 1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC. Forward Voltage (I F = 1.0 mAdc) VF — 0.29 0.32 Vdc 2- Thermal Resistance From Junction to Ambient Forward Voltage (I F = 10 mAdc) VF — 0.35 0.40 Vdc Forward Current (DC) IF — — 200 mAdc Repetitive Peak Forward Current IFRM — — 300 mAdc Non–Repetitive Peak Forward Current (t < 1.0 s) IFSM — — 600 mAdc Typical ThermalBreakdown Resistance (Note 2) (I R = 10 µA) Reverse Voltage Typical Junction Capacitance (Note Total Capacitance (V R = 1.01)V, f = 1.0 MHz) IO ELECTRICAL CHARACTERISTICS A = 25°C unless otherwise noted) (EACH DIODE) Peak Forward Surge Current 8.3 ms single half(T sine-wave superimposed on ratedCharacteristic load (JEDEC method) 2 ANODE 2012-11 2012-06 RΘJA WILLAS ELECTRONIC COR WILLAS ELECTRONIC CORP. WILLAS FM120-M+ THRU BAT54HT1 FM1200-M 200mA Surface Mount Schottky Barrier Rectifiers-30V 1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS -20V- 200V SOD-323 Package SOD-123+ PACKAGE Pb Free Produc Package outline Features • Batch process design, excellent power dissipation offers better reverse current and thermal resistance. 2.0leakage k Ω surface mounted application in order to +10 •VLow820 profile optimize board space. tp tr t 0.1µF • Low power loss, high efficiency. IF 100 µH • High current capability, low forward voltage drop. 10% • High surge capability. forµF overvoltage protection. • Guardring0.1 90% DUT high-speed switching. •50Ultra Ω OUTPUT 50 Ω INPUT epitaxial planar chip, metal silicon junction. • Silicon PULSE INPUT SIGNAL SAMPLING Lead-free parts meet environmentalOSCILLOSCOPE standards of V R • GENERATOR MIL-STD-19500 /228 • RoHS product for packing code suffix "G" Halogen free product for packing code suffix "H" SOD-123H IF 0.146(3.7) 0.130(3.3) rr t i IR R(REC) 0.012(0.3) Typ. 0.071(1.8) = 1.0 mA 0.056(1.4) OUTPUT PULSE (I F = I R = 10 mA; MEASURED at i R(REC) = 1.0 mA) MechanicalNotes: data 1. A 2.0 kΩ variable resistor adjusted for a Forward Current (I • • • t F ) of 10mA. 0.040(1.0) 0.024(0.6) Inputretardant pulse is adjusted so I R(peak) is equal to 10mA. Epoxy : UL94-V0Notes: rated 2. flame Notes: 3. t p » t rr Case : Molded plastic, SOD-123H 0.031(0.8) Typ. , Terminals :Plated terminals, solderable MIL-STD-750 Figure 1. per Recovery Time Equivalent Test Circuit 0.031(0.8) Typ. Method 2026 • Polarity : Indicated by cathode band • Mounting Position : Any • Weight : Approximated 0.011 gram Dimensions in inches and (millimeters) TYPICAL CHARACTERISTICS 1000 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS 100 Ratings at 25℃ ambient temperature unless otherwise specified. – 40°C Single phase 60Hz, resistive of inductive load. 10 half wave, 150°C For capacitive load, derate current by 20% Marking Code RATINGS 125°C 1.0 85°C 25°C 12 20 VRRM 14 VRMS –55°C VDC –25°C Maximum DC Blocking Voltage 20 IO 0.5 Peak Forward Surge Current ms single half sine-wave(VOLTS) V F ,8.3 FORWARD VOLTAGE IFSM Maximum Average Forward Rectified Current 0.1 0.0 0.1 10 1.0 FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH SYMBOL FM120-MH FM130-MH Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage I R , REVERSE CURRENT (µA) I F , FORWARD CURRENT (mA) 100 0.2 0.3 13 30 21 30 0.01 0.001 0.4 0.6 14 40 0.1 15 50 Figure 2. Forward Voltage Operating Temperature Range C T , TOATAL CAPACITANCE (pF) Storage Temperature Range 42 56 70 105 140 60 80 100 150 200 0 5 CHARACTERISTICS Maximum Forward Voltage at 1.0A DC Rated DC Blocking Voltage NOTES: 30 Figure 3. Leakage Current 40 120 -55 to +150 - 65 to +175 SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH 10 VF 8 Maximum Average Reverse Current at @T A=25℃ 1.0 20 25 15 V R , REVERSE30 VOLTAGE (VOLTS) 10 TSTG 12 120 200 35 -55 to +125 TJ 14 115 150 50 CJ Typical Junction Capacitance (Note 1) 10 100 28 RΘJA 18 80 40 superimposed on rated load (JEDEC method) Typical Thermal Resistance (Note 2) 16 60 0.50 0.70 0.9 0.92 0.5 IR @T A=125℃ 6 0.85 10 4 1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC. 2- Thermal Resistance From Junction to Ambient 2 0 0 5 10 15 20 25 30 V R , REVERSE VOLTAGE (VOLTS) Figure 4. Total Capacitance 2012-06 2012-11 WILLAS ELECTRONIC COR WILLAS ELECTRONIC CORP. WILLAS FM120-M+ THRU BAT54HT1 FM1200-M+ 200mA Surface Mount Schottky Barrier Rectifiers-30V 1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS -20V- 200V SOD-323 PackagePACKAGE SOD-123+ Pb Free Produc Package outline Features • Batch process design, excellent power dissipation offers better reverse leakage current and thermal resistance. SOD-123H • Low profile surface mounted application in order to optimize board space. .075(1.90) Mechanical data .059(1.50) Halogen free product for packing code suffix "H" 0.146(3.7) 0.130(3.3) 0.012(0.3) Typ. 0.071(1.8) 0.056(1.4) .045(1.15) .010(0.25) .016(0.40) MIL-STD-19500 /228 • RoHS product for packing code suffix "G" .057(1.45) • Low power loss, high efficiency. • High current capability, low forward voltage drop.SOD-323 • High surge capability. • Guardring for overvoltage protection. .106(2.70) • Ultra high-speed switching. • Silicon epitaxial planar chip, metal silicon junction. .091(2.30) standards of • Lead-free parts meet environmental .043(1.10) .031(0.80) • Epoxy : UL94-V0 rated flame retardant • Case : Molded plastic, SOD-123H , • Terminals :Plated terminals, solderable per MIL-STD-750 0.040(1.0) 0.024(0.6) 0.031(0.8) Typ. 0.031(0.8) Typ. Method 2026 • Polarity : Indicated by cathode band • Mounting Position : Any • Weight : Approximated 0.011 gram Dimensions in inches and (millimeters) .004(0.10)MAX. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive of inductive load. For capacitive load, derate current by 20% RATINGS SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH Marking Code Maximum Recurrent Peak Reverse Voltage VRRM 12 20 Maximum RMS Voltage VRMS 14 Maximum DC Blocking Voltage VDC 20 Maximum Average Forward Rectified Current IO IFSM Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) RΘJA Typical Thermal Resistance (Note 2) Typical Junction Capacitance (Note 1) CJ Operating Temperature Range TJ Storage Temperature Range 13 14 .008(0.20) 30 40 .004(0.10) 21 28 30 40 15 50 16 60 18 80 10 100 115 150 120 200 35 42 50 60 56 70 105 140 80 100 150 200 1.0 30 .016(0.40) .010(0.25) 40 120 -55 to +125 -55 to +150 .010(0.25)MIN. TSTG - 65 to +175 CHARACTERISTICS SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH VF Maximum Forward Voltage at 1.0A DC 0.50 0.70 0.85 Maximum Average Reverse Current at @T A=25℃ 0.5 Rated DC Blocking Voltage 10 IRin inches and (millimeters) Dimensions @T A=125℃ 0.9 0.92 NOTES: 1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC. 2- Thermal Resistance From Junction to Ambient 2012-06 2012-11 WILLAS ELECTRONIC CORP WILLAS ELECTRONIC CORP. WILLAS FM120-M+ THRU BAT54HT1 FM1200-M+ 200mA Surface Mount Schottky Barrier Rectifiers-30V 1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS -20V- 200V SOD-323 PackagePACKAGE SOD-123+ Pb Free Produc Package outline Features • Batch process design, excellent power dissipation offers better reverse leakage current and thermal resistance. SOD-123H • Low profile surface mounted application in order to optimize board space. 0.146(3.7) high efficiency. • Low power loss, Device PN Packing 0.130(3.3) • High current capability, (1) low (2) forward voltage drop. G ‐WS Tape&Reel: 3 Kpcs/Reel surge capability. • HighBAT54HT1 ‐T for overvoltage protection. • Guardring Note: (1) Packing code, Tape & Reel Packing • Ultra high-speed switching. (2) RoHS product for packing code suffix ”G”；Halogen free product for packing code suffix “H” epitaxial planar chip, metal silicon junction. • Silicon Lead-free parts meet environmental standards of • MIL-STD-19500 /228 • RoHS product for packing code suffix "G" Halogen free product for packing code suffix "H" Ordering Information: 0.012(0.3) Typ. 0.071(1.8) 0.056(1.4) Mechanical data • Epoxy : UL94-V0 rated flame retardant • Case : Molded plastic, SOD-123H , • Terminals :Plated terminals, solderable per MIL-STD-750 0.040(1.0) 0.024(0.6) 0.031(0.8) Typ. 0.031(0.8) Typ. Method 2026 • Polarity : Indicated by cathode band • Mounting Position : Any • Weight : Approximated 0.011 gram Dimensions in inches and (millimeters) ***Disclaimer*** WILLAS reserves the right to make changes without notice to any product MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS specification herein, to make corrections, modifications, enhancements or other Ratings at 25℃ ambient temperature unless otherwise specified. changes. WILLAS or anyone on its behalf assumes no responsibility or liability Single phase half wave, 60Hz, resistive of inductive load. load, derate current by 20% for any errors or inaccuracies. Data sheet specifications and its information For capacitive SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH RATINGS contained are intended to provide a product description only. "Typical" parameters Marking Code 12 13 14 15 16 18 10 115 120 which may be included on WILLAS data sheets and/ or specifications can 20 30 40 50 60 80 100 150 200 Maximum Recurrent Peak Reverse Voltage VRRM 14 21 28 35 42 56 70 105 140 Maximum RMS Voltage VRMS and do vary in different applications and actual performance may vary over time. Maximum DC Blocking Voltage 20 30 40 50 60 80 100 150 200 VDC WILLAS does not assume any liability arising out of the application or Maximum Average Forward Rectified Current IO 1.0 use of any product or circuit. Peak Forward Surge Current 8.3 ms single half sine-wave 30 IFSM superimposed on rated load (JEDEC method) 40 TypicalWILLAS products are not designed, intended or authorized for use in medical, Thermal Resistance (Note 2) RΘJA 120 Typical Junction Capacitance (Note 1) CJ life‐saving implant or other applications intended for life‐sustaining or other related -55 to +125 -55 to +150 Operating Temperature Range TJ - 65 to +175 Storageapplications where a failure or malfunction of component or circuitry may directly Temperature Range TSTG or indirectly cause injury or threaten a life without expressed written approval CHARACTERISTICS SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH 0.9 Maximum Forward Voltage at 1.0A DC 0.92 VF 0.50 0.70 0.85 of WILLAS. Customers using or selling WILLAS components for use in 0.5 Maximum Average Reverse Current at @T A=25℃ IR such applications do so at their own risk and shall agree to fully indemnify WILLAS 10 @T A=125℃ Rated DC Blocking Voltage Inc and its subsidiaries harmless against all claims, damages and expenditures. NOTES: 1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC. 2- Thermal Resistance From Junction to Ambient 2012-06 2012-11 WILLAS ELECTRONIC CORP WILLAS ELECTRONIC CORP.