RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN AUSSCHNITT #7 TERMINALS REMOVED 14.72 [.580] 0.38±0.10 [.015±.004] 16.66 [.656] PCB EDGE LP ANSCHLUSS ABGESCHNITTEN 8 13.63 [.537] 1 21.59 [.850] MAX 3.20±0.20 [.126±.008] 15.88 [.625] 10.89 [.429] 11.43±0.13 [.450±.005] RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENER FUER LEITERPLATTE (BESTUECKUNGSSEITE) TOL ±0.05 [.002] UNLESS NOTED 1.27 [.050] 0.64 [.025] 2.54 [.100] PCB 8 ˚0.89±0.07 [ P1 ˚.035±.003] X7 P2 J2 P3 J3 ˚.128±.003] X2 11.43 [.450] 8.89 [.350] 2.54 [.100] ˚.063±.003] X2 3.05 [.120] ˚3.25±0.07 [ J1 CT P4 1 ˚1.60±0.07 [ ELECTRICAL SCHEMATICS 10 BASE T - M2A01 ELEKTRISCHES DIAGRAMM CABLE CT P5 P6 J6 MAGNETICS SPECIFICATIONS AT 25˚ C 15.49 [.610] TURNS RATIO (P1-P2:J1-J2) 1CT: 1±3% (P3-P6:J3-J6) 1CT: 1±3% OCL (100 KHz, 0.1 100 µH TYP Vrms) 0.9 W MAX (P1-P2, P3-P6) -20 dB TYP DCR (P1-P2, P3-P6) -40 dB MIN RETURN LOSS -40 dB MIN 5-10 MHz 1500 Vrms CROSSTALK (0.1-10 MHz) CMR (0.1-10 MHz) ISOLATION NOTE 1: PANEL GROUND FLANGES BOTH SIDES AND TOP (GF5) MATERIALS AND FINISH NOTE 2: SIDE GROUND TABS REAR OF PEG 3.05mm (R) HOUSING: GLASS FILLED POLYESTER UL 94 V-0 BLACK Information: SHIELDING: Cu ALLOY, PLATED WITH Ni TERMINAL FINISH: Sn MECHANICAL CHARACTERISTICS DURABILITY: 1000 MATING CYCLES ELECTRICAL CHARACTERISTICS CONTACT RESISTANCE: 30 MILLIOHMS MAX OPERATING TEMPERATURE: 0˚C TO 70˚C All rights reserved. Only for information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. 2:1 - All Dimensions MJFS-R-88-GF5-M2A01 Consider protection memo from DIN 34 CONTACTS: PHOSPHOR BRONZE CONTACT FINISH: Au, 0.8 µm [30 µin], OVER Ni Scale Tolerances MAXCONN P.N.: - in mm [in] Subject to modification without Designation MOD JACK - MJIM prior notice. Drawing will not be updated. 8C7T, 1X1, INTEGRATED MAGNETICS ERNI Components c 29JAN03 Rev. Date 203150 CHESTER, VA U.S.A. Group/Type MAXMJ I