21.59 [.850] MAX #7 TERMINAL REMOVED ANSCHLUSS ABGESCHNITTEN 8 13.63 [.537] 1 3.20±0.20 [.126±.008] 15.88 [.625] 10.89 [.429] 11.43±0.13 [.450±.005] RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN AUSSCHNITT RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENER FUER LEITERPLATTE (BESTUECKUNGSSEITE) TOL ±0.05 [.002] UNLESS NOTED 0.38±0.10 [.015±.004] 2.54 [.100] 8 0.89±0.07 [ .035±.003] X7 14.72 [.580] 16.66 [.656] 1.27 [.050] 0.64 [.025] PCB EDGE LP 1 MAGNETICS SPECIFICATIONS @ 25°C TURNS RATIO: (P1-P2 : J1-J2) 1CT : 1 ±3% (P3-P6 : J3-J6) 1CT : 1 ±3% OCL(100 KHz, 0.1 Vrms, 8 mA) (P1-P2 : P3-P6) 350µH MIN DCR (P1-P2, P3-P6) 0.9 OHMS MAX INSERTION LOSS: 0.1-100 MHz 11.43 [.450] 15.49 [.610] -18 dB MIN -15.5 dB MIN -13.6 dB MIN -12 dB MIN CROSSTALK: 1-100 MHz -40 dB TYP CMR: 0.1 - 30 MHz 30 - 60 MHz 60 - 100 MHz -50 dB TYP -40 dB TYP -35 dB TYP ISOLATION 1500 Vrms ELECTRICAL SCHEMATIC - 10/100 BASE TX - L3D01 ELEKTRISCHES DIAGRAMM PCB -1.1 dB MAX RETURN LOSS: 0.5 - 30 MHz: 40 MHz: 50 MHz 60 - 80 MHz 8.89 [.350] 3.05 [.120] 3.25±0.07 [ .128±.003] X2 2.54 [.100] 1.60±0.07 [ .063±.003] X2 CABLE TD+ P1 J1 TX+ CT P4 TD- P2 J2 TX- RD+ P3 J3 RX+ CT P5 RD- P6 J6 RX- GND P8 J4,5 J7,8 1000pF/2KV 4X 75 W COMPLIANT WITH GR1089-CORE INTRA-BUILDING LIGHTENING SURGE TEST REQUIREMENTS NOTE 1: SIDE SHIELD TABS IN REAR 3.05mm (R) HOUSING: GLASS FILLED POLYESTER UL 94 V-0 BLACK SHIELDING: Cu ALLOY, PLATED WITH Ni CONTACTS: PHOSPHOR BRONZE CONTACT FINISH: Au, 0.8µm [30µin], OVER Ni TERMINAL FINISH: SnPb MECHANICAL CHARACTERISTICS DURABILITY: 1000 MATING CYCLES OPERATING TEMPERATURE: 0°C TO 70°C NOTE 2: PANEL GROUND FLANGES BOTH SIDES AND TOP (GF5) Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. MATERIALS AND FINISH Scale Tolerances Information: - All Dimensions in mm All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. a 02JUL04 Designation Subject to modification without prior notice. Drawing will not be updated. 2:1 MOD JACK - MJIM 8C7T, 1X1, INTEGRATED MAGNETICS 203273 www.ERNI.com Class MAXMJ I(1/1) A3