RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN AUSSCHNITT 14.72 [.580] 0.38±0.10 [.015±.004] 16.66 [.656] PCB EDGE LP #7 TERMINALS REMOVED ANSCHLUSS ABGESCHNITTEN 8 13.63 [.537] 1 21.59 [.850] MAX 3.20±0.20 [.126±.008] 15.88 [.625] 10.89 [.429] 11.43±0.13 [.450±.005] ELECTRICAL SCHEMATICS 10/100 BASE TX - M3B01 RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENER FUER LEITERPLATTE (BESTUECKUNGSSEITE) TOL ±0.05 [.002] UNLESS NOTED ELEKTRISCHES DIAGRAMM 1.27 [.050] 0.64 [.025] P1 2.54 [.100] 8 J1 CT P4 P2 J2 P3 J3 CT P5 P6 J6 1 J4,5 3.05 [.120] ±0,00 X 2 0,13 5 ±0,07 3 ,2 11.43 [.450] 8.89 [.350] GND P8 2.54 [.100] 0,04 ±0,00 7 X 7 0,89 ±0,0 0,06 ±0,00 7 X 2 1,60 ±0,0 CABLE PCB J7,8 2X 75 W 1000pF/2KV - (REQUIRED, NOT INCLUDED IN MAGNETICS) MAGNETICS SPECIFICATIONS @ 25°C AUTO MDIX COMPATIBLE MATERIALS AND FINISH HOUSING: GLASS FILLED POLYESTER UL 94 V-0 BLACK SHIELDING: Cu ALLOY, PLATED WITH Ni CONTACTS: PHOSPHOR BRONZE CONTACT FINISH: Au, 0.8 µm [30 µin] TERMINAL FINISH: SnPb MECHANICAL CHARACTERISTICS DURABILITY: 1000 MATING CYCLES OPERATING TEMPERATURE: 0°C TO 70°C Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. 15.49 [.610] Information: Tolerances TURNS RATIO: (P1-P2 : J1-J2) 1CT : 1 ±3% (P3-P6 : J3-J6) 1CT : 1 ±3% OCL(100 KHz, 0.1 Vrms, 8 mA) (P1-P2 : P3-P6) 350µH MIN DCR (P1-P2, P3-P6) 0.9 OHMS MAX INSERTION LOSS: 0.1-100 MHz -1.1 dB MAX RETURN LOSS: 0.5 - 30 MHz: 40 MHz: 50 MHz 60 - 80 MHz -18 dB MIN -15.5 dB MIN -13.6 dB MIN -12 dB MIN CROSSTALK: 1-100 MHz -40 dB TYP CMR: 0.1 - 30 MHz 30 - 60 MHz 60 - 100 MHz -50 dB TYP -40 dB TYP -35 dB TYP ISOLATION 1500 Vrms Scale - All Dimensions in mm All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. 2:1 MOD JACK - MJIM 8C7T, 1X1, INTEGRATED MAGNETICS 203151 www.ERNI.com Class MAXMJ I (1/1) A3