PD - 95566 IRG4PC60FPbF Fast Speed IGBT INSULATED GATE BIPOLAR TRANSISTOR Features C Fast: Optimized for medium operating frequencies ( 1-5 kHz in hard switching, >20 kHz in resonant mode). Generation 4 IGBT design provides tighter parameter distribution and higher efficiency. Industry standard TO-247AC package. Lead-Free VCES = 600V VCE(on) typ. = 1.50V G @VGE = 15V, IC = 60A E n-channel Benefits Generation 4 IGBT's offer highest efficiency available IGBT's optimized for specified application conditions Designed for best performance when used with IR Hexfred & IR Fred companion diodes. TO-247AC Absolute Maximum Ratings VCES IC @ TC = 25°C IC @ TC = 100°C ICM ILM VGE EARV PD @ TC = 25°C PD @ TC = 100°C TJ TSTG Parameter Max. Units Collector-to-Emitter Breakdown Voltage Continuous Collector Current Continuous Collector Current Pulsed Collector Current Clamped Inductive Load Current Gate-to-Emitter Voltage Reverse Voltage Avalanche Energy Maximum Power Dissipation Maximum Power Dissipation Operating Junction and Storage Temperature Range Soldering Temperature, for 10 seconds Mounting torque, 6-32 or M3 screw. 600 90 60 120 120 ± 20 200 520 210 -55 to + 150 V A V mJ W 300 (0.063 in. (1.6mm from case ) 10 lbfin (1.1Nm) °C Thermal Resistance Parameter RθJC RθCS RθJA Wt www.irf.com Junction-to-Case Case-to-Sink, Flat, Greased Surface Junction-to-Ambient, typical socket mount Weight Typ. Max. 0.24 6 (0.21) 0.24 40 Units °C/W g (oz) 1 07/15/04 IRG4PC60FPbF Electrical Characteristics @ TJ = 25°C (unless otherwise specified) Parameter Min. Typ. Collector-to-Emitter Breakdown Voltage 600 Emitter-to-Collector Breakdown Voltage 16 ∆V(BR)CES/∆TJ Temperature Coeff. of Breakdown Voltage 0.13 1.5 VCE(ON) Collector-to-Emitter Saturation Voltage 1.7 1.5 VGE(th) Gate Threshold Voltage 3.0 ∆V GE(th)/∆TJ Temperature Coeff. of Threshold Voltage -11 gfe Forward Transconductance 36 69 ICES Zero Gate Voltage Collector Current IGES Gate-to-Emitter Leakage Current V(BR)CES V(BR)ECS Max. Units Conditions V VGE = 0V, IC = 250µA V VGE = 0V, IC = 1.0A V/°C VGE = 0V, IC = 1.0mA VGE = 15V 1.8 IC = 60A IC = 90A See Fig.2, 5 V IC = 60A , TJ = 150°C 6.0 VCE = VGE, IC = 250µA mV/°C VCE = VGE, IC = 250µA S VCE = 100V, IC = 60A 250 VGE = 0V, VCE = 600V µA 2.0 VGE = 0V, VCE = 10V, TJ = 25°C 1000 VGE = 0V, VCE = 600V, TJ = 150°C ±100 n A VGE = ±20V Switching Characteristics @ TJ = 25°C (unless otherwise specified) Qg Qge Qgc td(on) tr td(off) tf Eon Eoff Ets td(on) tr td(off) tf Ets LE Cies Coes Cres Parameter Total Gate Charge (turn-on) Gate - Emitter Charge (turn-on) Gate - Collector Charge (turn-on) Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Turn-On Switching Loss Turn-Off Switching Loss Total Switching Loss Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Total Switching Loss Internal Emitter Inductance Input Capacitance Output Capacitance Reverse Transfer Capacitance Min. Typ. 290 40 100 42 66 310 170 0.30 4.6 4.9 39 66 470 300 8.8 13 6050 360 66 Max. Units Conditions 340 IC = 40A 47 nC VCC = 400V See Fig. 8 130 VGE = 15V TJ = 25°C ns 360 IC = 60A, VCC = 480V 220 VGE = 15V, RG = 5.0Ω Energy losses include "tail" mJ See Fig. 10, 11, 13, 14 6.3 TJ = 150°C, IC = 60A, VCC = 480V ns VGE = 15V, RG = 5.0Ω Energy losses include "tail" mJ See Fig. 13, 14 nH Measured 5mm from package VGE = 0V pF VCC = 30V See Fig. 7 = 1.0MHz Notes: Repetitive rating; VGE = 20V, pulse width limited by max. junction temperature. ( See fig. 13b ) VCC = 80%(VCES), VGE = 20V, L = TBD µH, Pulse width ≤ 80µs; duty factor ≤ 0.1%. Pulse width 5.0µs, single shot. RG = 5.0Ω. (See fig. 13a) Repetitive rating; pulse width limited by maximum junction temperature. 2 www.irf.com IRG4PC60FPbF 160 Triangular wave: Square wave: 60% of rated voltage Load Current ( A ) 120 Clamp voltage: 80% of rated Ideal diodes 80 For both: Duty cycle : 50% Tj = 125°C Tsink = 90°C Gate drive as specified Power Dissipation = 73W 40 0 0.1 1 10 100 f , Frequency ( kHz ) Fig. 1 - Typical Load Current vs. Frequency (For square wave, I=IRMS of fundamental; for triangular wave, I=IPK) 1000 T J = 150°C 100 10 1 T J = 25°C 0.1 VGE = 15V 20µs PULSE WIDTH IC, Collector-to-Emitter Current (A) IC, Collector t-to-Emitter Current (A) 1000 100 T J = 150°C 10 1 TJ = 25°C 0.1 VCC = 10V 5µs PULSE WIDTH 0.01 0.01 0.0 1.0 2.0 3.0 4.0 5.0 VCE , Collector-to-Emitter Voltage (V) Fig. 2 - Typical Output Characteristics www.irf.com 4 5 6 7 8 9 10 11 VGE, Gate-to-Emitter Voltage (V) Fig. 3 - Typical Transfer Characteristics 3 IRG4PC60FPbF 3.0 100 Maximum DC Collector Current (A) 90 VCE , Collector-to Emitter Voltage (V) V GE = 15V 80 70 60 50 40 30 20 10 VGE = 15V 80µs PULSE WIDTH IC = 120A 2.0 IC = 60A IC = 30A 1.0 0 25 50 75 100 125 150 -60 -40 -20 0 20 40 60 80 100 120 140 160 TJ , Junction Temperature (°C) T C, Case Temperature (°C) Fig. 4 - Maximum Collector Current vs. Case Temperature Fig. 5 - Typical Collector-to-Emitter Voltage vs. Junction Temperature Thermal Response (Z ) thJC 1 D = 0.50 0.1 0.20 0.10 0.05 0.01 0.02 0.01 P DM SINGLE PULSE (THERMAL RESPONSE) t1 t2 Notes: 0.001 0.00001 0.0001 0.001 0.01 1. Duty factor D = t1 / t 2 2. Peak T J = P DM x Z thJC +TC 0.1 1 t1, Rectangular Pulse Duration (sec) Fig. 6 - Maximum Effective Transient Thermal Impedance, Junction-to-Case 4 www.irf.com IRG4PC60FPbF 100000 V CC = 400V IC Coes = Cce + Cgc 10000 = 40A 15 Cies VGE , Gate-to-Emitter Voltage (V) Capacitance (pF) 20 VGE = 0V, f = 1 MHZ Cies = Cge + Cgc, Cce SHORTED Cres = Cce 1000 Coes 100 Cres 10 5 10 0 100 200 300 400 0 500 0 Fig. 7 - Typical Capacitance vs. Collector-to-Emitter Voltage 100 150 200 250 300 Fig. 8 - Typical Gate Charge vs. Gate-to-Emitter Voltage 100 8.00 RG = 5.0 Ω VGE = 15V VCC = 480V VGE = 15V TJ = 25°C Total Switching Losses (mJ) Total Switching Losses (mJ) 50 QG, Total Gate Charge (nC) VCE (V) I C = 60A 7.00 6.00 5.00 VCC = 480V IC = 120A 10 IC = 60A IC = 30A 1 4.00 0 10 20 30 40 R G, Gate Resistance (Ω) Fig. 9 - Typical Switching Losses vs. Gate Resistance www.irf.com 50 -60 -40 -20 0 20 40 60 80 100 120 140 160 T J, Junction Temperature (°C) Fig. 10 - Typical Switching Losses vs. Junction Temperature 5 IRG4PC60FPbF 1000 RG = 5.0Ω TJ = 150°C VGE = 15V IC, Collector-to-Emitter Current (A) Total Switching Losses (mJ) 30.0 VCC = 480V 20.0 10.0 0.0 100 SAFE OPERATING AREA 10 1 30 50 70 90 110 IC, Collector Current (A) Fig. 11 - Typical Switching Losses vs. Collector-to-Emitter Current 6 VGE = 20V T J = 125° 130 0.1 1 10 100 1000 VDS, Drain-to-Source Voltage (V) Fig. 12 - Turn-Off SOA www.irf.com IRG4PC60FPbF L D.U.T. RL = VC * 50V 0 - 480V 1000V 480V 4 X IC@ 25°C 480µF 960V c d * Driver same type as D.U.T.; Vc = 80% of Vce(max) * Note: Due to the 50V power supply, pulse width and inductor will increase to obtain rated Id. Fig. 13b - Pulsed Collector Fig. 13a - Clamped Inductive Current Test Circuit Load Test Circuit IC L Driver* D.U.T. Fig. 14a - Switching Loss Test Circuit VC 50V 1000V c d e * Driver same type as D.U.T., VC = 480V c d 90% e VC 10% 90% Fig. 14b - Switching Loss t d(off) 10% I C 5% Waveforms tf tr t d(on) t=5µs E on E off E ts = (Eon +Eoff ) www.irf.com 7 IRG4PC60FPbF TO-247AC Package Outline Dimensions are shown in millimeters (inches) TO-247AC Part Marking Information EXAMPLE: T HIS IS AN IRF PE30 WIT H AS S EMBLY LOT CODE 5657 AS S EMBLED ON WW 35, 2000 IN T HE AS S EMBLY LINE "H" Note: "P" in assembly line position indicates "Lead-Free" PART NUMBER INT ERNAT IONAL RECT IF IE R LOGO IRFPE 30 56 AS S EMB LY LOT CODE 035H 57 DAT E CODE YE AR 0 = 2000 WEEK 35 LINE H Data and specifications subject to change without notice. This product has been designed and qualified for the Industrial market. Qualification Standards can be found on IR’s Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information.07/04 8 www.irf.com Note: For the most current drawings please refer to the IR website at: http://www.irf.com/package/