BFR193L3 NPN Silicon RF Transistor* • For low noise, high-gain amplifiers up to 2 GHz • For linear broadband amplifiers 3 1 • fT = 8 GHz, F = 1 dB at 900 MHz 2 * Short term description ESD (Electrostatic discharge) sensitive device, observe handling precaution! Type BFR193L3 Marking RC Pin Configuration 1=B 2=E 3=C Package TSLP-3-1 Maximum Ratings Parameter Symbol Value Unit Collector-emitter voltage VCEO 12 Collector-emitter voltage VCES 20 Collector-base voltage VCBO 20 Emitter-base voltage VEBO 2 Collector current IC 80 Base current IB 10 Total power dissipation1) Ptot 580 mW Junction temperature Tj 150 °C Ambient temperature TA -55 ... 150 Storage temperature T stg -55 ... 150 V mA TS ≤ 95°C Thermal Resistance Parameter Symbol Junction - soldering point 2) RthJS Value Unit tbd K/W 1T is measured on the collector lead at the soldering point to the pcb S 2For calculation of R thJA please refer to Application Note Thermal Resistance 1 2005-09-23 BFR193L3 Electrical Characteristics at TA = 25°C, unless otherwise specified Symbol Parameter Values Unit min. typ. max. 12 - - V ICES - - 100 µA ICBO - - 100 nA IEBO - - 1 µA hFE 70 100 140 DC Characteristics Collector-emitter breakdown voltage V(BR)CEO IC = 1 mA, I B = 0 Collector-emitter cutoff current VCE = 20 V, VBE = 0 Collector-base cutoff current VCB = 10 V, I E = 0 Emitter-base cutoff current VEB = 1 V, IC = 0 DC current gain- - IC = 30 mA, VCE = 8 V, pulse measured 2 2005-09-23 BFR193L3 Electrical Characteristics at TA = 25°C, unless otherwise specified Symbol Values Parameter min. typ. max. AC Characteristics (verified by random sampling) Transition frequency fT 6 8 - Ccb - 0.63 0.9 Cce - 0.22 - Ceb - 2.25 - Unit GHz IC = 50 mA, VCE = 8 V, f = 500 MHz Collector-base capacitance pF VCB = 10 V, f = 1 MHz, VBE = 0 , emitter grounded Collector emitter capacitance VCE = 10 V, f = 1 MHz, VBE = 0 , base grounded Emitter-base capacitance VEB = 0.5 V, f = 1 MHz, VCB = 0 , collector grounded Noise figure dB F IC = 10 mA, VCE = 8 V, Z S = ZSopt , f = 900 MHz - 1 - - 1.6 - - 19 - - 12.5 - IC = 10 mA, VCE = 8 V, Z S = ZSopt , f = 1.8 GHz Power gain, maximum available1) G ma IC = 30 mA, VCE = 8 V, Z S = ZSopt , ZL = ZLopt , f = 900 MHz IC = 30 mA, VCE = 8 V, Z S = ZSopt , ZL = ZLopt , f = 1.8 GHz |S 21e|2 Transducer gain dB IC = 30 mA, VCE = 8 V, Z S = ZL = 50Ω , f = 900 MHz - 14.5 - - 9 - IC = 30 mA, VCE = 8 V, Z S = ZL = 50Ω , f = 1.8 GHz 1G 1/2) ma = |S21 / S12| (k-(k²-1) 3 2005-09-23 BFR193L3 SPICE Parameter (Gummel-Poon Model, Berkley-SPICE 2G.6 Syntax): Transitor Chip Data: IS = VAF = NE = VAR = NC = RBM = CJE = TF = ITF = VJC = TR = MJS = XTI = 0.2738 24 1.935 3.8742 0.94371 1 1.1824 18.828 0.96893 1.1828 1.0037 0 3 fA V BF = IKF = BR = IKR = RB = RE = VJE = XTF = PTF = MJC = CJS = NK = FC = V Ω fF ps mA V ns - 125 0.26949 14.267 0.037925 1.8368 0.76534 0.70276 0.69477 0 0.30002 0 0 0.72063 A A Ω V deg fF - NF = ISE = NR = ISC = IRB = RC = MJE = VTF = CJC = XCJC = VJS = EG = TNOM 0.95341 10.627 1.4289 0.037409 0.91763 0.11938 0.48654 0.8 935.03 0.053563 0.75 1.11 300 fA fA mA Ω V fF V eV K All parameters are ready to use, no scalling is necessary. Extracted on behalf of Infineon Technologies AG by: Institut für Mobil- und Satellitentechnik (IMST) Package Equivalent Circuit: C4 C7 C1 L2 B Transistor Chip B' C' R1 L3 C E' C6 C2 L1 C5 C3 L1 = L2 = L3 = C1 = C2 = C3 = C4 = C5 = C6 = C7 = R1 = 0.575 0.575 0.275 33 28 131 8 8 24 300 204 nH nH nH fF fF fF fF fF fF fF Ω Valid up to 6GHz E EHA07536 For examples and ready to use parameters please contact your local Infineon Technologies distributor or sales office to obtain a Infineon Technologies CD-ROM or see Internet: http//www.infineon.com/silicondiscretes 4 2005-09-23 Package TSLP-3-1 BFR193L3 Package Outline Bottom view 0.4 +0.1 0.6 ±0.05 0.5 ±0.035 2 1 ±0.05 3 0.65 ±0.05 3 1) 2 1 1) 0.05 MAX. 0.35 ±0.05 Pin 1 marking 2 x 0.15 ±0.035 2 x 0.25 ±0.035 1 0.25 ±0.035 1) Top view 1) 1) Dimension applies to plated terminal Foot Print R0.1 0.2 0.225 0.2 0.225 0.315 0.35 1 0.3 0.945 0.35 0.45 0.275 0.6 0.355 For board assembly information please refer to Infineon website "Packages" 0.17 0.15 Copper Solder mask Stencil apertures Marking Layout Type code BFR193L3 Laser marking Pin 1 marking Example Standard Packing Reel ø180 mm = 15.000 Pieces/Reel 0.5 1.16 Pin 1 marking 8 4 0.76 5 2005-09-23 BFR193L3 Published by Infineon Technologies AG, St.-Martin-Strasse 53, 81669 München © Infineon Technologies AG 2005. All Rights Reserved. Attention please! The information herein is given to describe certain components and shall not be considered as a guarantee of characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.Infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. 6 2005-09-23