Product Overview

Product Overview
MC100EP16VT: Differential Driver / Receiver with Variable Output Swing and
Internal Input Termination
For complete documentation, see the data sheet
Product Description
The MC100EP16VT is a differential receiver functionally equivalent to the 100EP16 with input pins controlling the amplitude of the
outputs (pin 1) and providing an internal termination network (pin 4).
The VCTRL input pin controls the output amplitude of the EP16VT and is referenced to VCC. The operational range of the VCTRL input is
from ? VBB (a supply at VCC -1.42 V, maximum output amplitude) to VCC (minimum output amplitude). VBB is an externally supplied
voltage equal to VCC -1.42 V. A variable resistor between VCC and VBB, with the wiper driving VCTRL, can control the output amplitude.
Typical application circuits and a VCTRL Voltage vs. Output Amplitude graph are described in this data sheet. When left open, the
VCTRL pin will be internally pulled down to VEE and operate as a standard EP16, with 100% output amplitude.
The VTT input pin offers an internal termination network for a 50 line impedance environment. For further reference, see Application
Note AND8020, Termination of ECL Logic Devices. Input considerations are required for D and Dbar under no signal conditions to
prevent instability.
Special considerations are required for differential inputs under No Signal conditions to prevent instability.
Features
•
•
•
•
•
•
•
•
220 ps Propagation Delay
Maximum Frequency > 4 GHz Typical
The 100 Series Contains Temperature Compensation
PECL Mode Operating Range:
VCC= 3.0 V to 5.5 V with VEE= 0 V
NECL Mode Operating Range:
VCC= 0 V with VEE= -3.0 V to -5.5 V
Open Input Default State
50Ω Internal Termination Resistor
Pb-Free Packages are Available
Applications
• Free Running Crystal Oscillators
Part Electrical Specifications
Product
Compliance
Status
Type
Chann
els
Input / Input
Output Level
Ratio
Output VCC
Level
Typ
(V)
tJitterR
MS
Typ
(ps)
tskew(oo) Max
(ps)
tpd Typ
(ns)
tR & tF
Max
(ps)
fmaxClo fmaxDat Packa
ck Typ a Typ ge
(MHz) (Mbps) Type
MC100EP16VTDG
Pb-free
Active
Signal
Driver
1
1:1
ECL
ECL
0.2
20
0.3
170
4000
SOIC8
Active
Signal
Driver
1
1:1
ECL
ECL
0.2
20
0.3
170
4000
SOIC8
Active
Signal
Driver
1
1:1
ECL
ECL
0.2
20
0.3
170
4000
TSSO
P-8
Active
Signal
Driver
1
1:1
ECL
ECL
0.2
20
0.3
170
4000
TSSO
P-8
Active
Signal
Driver
1
1:1
ECL
ECL
0.2
20
0.3
170
4000
DFN-8
Halide free
MC100EP16VTDR2G
Pb-free
Halide free
MC100EP16VTDTG
Pb-free
Halide free
MC100EP16VTDTR2
G
MC100EP16VTMNR4
G
Pb-free
Halide free
Pb-free
Halide free
5
3.3
3.3
5
3.3
5
3.3
5
5
3.3
For more information please contact your local sales support at www.onsemi.com
Created on: 6/30/2016