GRM1 Power entry modules without line filter www.schurter.com/pg05 OU T IEC Appliance Inlet C14 with Fuseholder 2-pole, Line Switch 2-pole and Voltage Selector C14 70° C Description -Panel Mount: Snap-in version from rear-side -4 Functions: Appliance Inlet Protection class I, Line Switch 2-pole, Fuseholder for fuse-links 5 x 20 mm on the rear-side, Voltage Selectors (Jumper) -VDE Certificate Number: 40024784 -UL File Number: E93617 -Short Mounting Depth Time saving “Lock and Shield” snap-in design for rear-panel mounting -All single elements are already wired except voltage selector -Fuseholder on the inside of the equipment prevents accidental use of incorrect fuse-links by the user -Voltage selector for two voltage ranges -Insulation cover on the rear-side -Especially suitable for use in switching power supplies -Qualified for use in equipment according IEC/EN 60950 E- Approvals Characteristics Other versions on request -Panel thickness 1.0 / 2 / 2.5 mm (max.) -Fuseholder 1‑pole -Line switch 1-pole -Line switch with other rocker marking -Without housing and cover on the rear-side -For protection class II (only without housing and cover on the rear-side) -Voltage selector with other marking AS References This type is Phase-out without alternate type Last order date: 31.12.2012 Weblinks pdf-datasheet, html-datasheet, General Product Information, Approvals, RoHS, CHINA-RoHS, Mating Connectors, e-Shop, SCHURTER-StockCheck, Distributor-Stock-Check, CAD-Drawings, Accessories, Detailed request for product Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Technical Data 10 A / 250 VAC; 50/60 Hz 10 A / 250 VAC; 50/60 Hz > 2.3 kVAC between L-N > 2.8 kVAC between L/N-PE (1 min/50 Hz) -25 °C to 70 °C from front side IP 40 acc. to IEC 60529 Suitable for appliances with protection class I acc. to IEC 61140 Quick connect terminals 4.8 x 0.8 mm Solder terminal on request Solder terminals on voltage selector Snap-in: 1.5 mm (other on request) Thermoplastic, black, UL 94V-0 PH Ratings IEC Ratings UL/CSA Dielectric Strength Allowable Operation Temp. Degree of Protection Protection Class Terminal Panel Thickness s Material: Housing Appliance Inlet Fuseholder Rated Power Acceptance @ Ta 23 °C Power Acceptance @ Ta > 23°C Line Switch Voltage Selectors Connectors C14 acc. to IEC 60320, UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class I 1 or 2 pole, Shocksafe category PC2 acc. to IEC 60127-6, for fuse-links 5 x 20 mm 5 x 20: 2 W (1 pole)/ 1.6 W (2-pole) per pole Admissible power acceptance at higher ambient temperature see derating curves Rocker switch 2-pole, non-illuminated, acc. to IEC 61058-1 Technical Details optional jumper, 2 pos. GRM1 Power entry modules without line filter www.schurter.com/pg05 Dimensions 26.05 23.3 T 13.35 40.9 3.9 38.4 45.4 8.4 42.4 +0.1 0 19.1 R 1.7 33.9 21.8 31.7 E 8.6 OU 1 S ±0.05 min. 8 *) 34.2 ±0.05 E = 31.7 mm for GRM1 with fuseholder E = 26.25 mm for GRM1 without fuseholder *) min. space to remove the fuseholder cover Mounting instructions Step 1 E- PH Step 3 Push the socket forward into the panel cut-out. Push the socket upwards. AS Place the socket in top edge of the panel cut-out. Step 2 Step 4 Release the socket. The component is self adjusting. Connectors GRM1 Power entry modules without line filter www.schurter.com/pg05 Diagrams Version: line switch and fuseholder 2-pole OU T Voltage selector 1) Line 2) Load Derating Curves 1-pole 2-pole 1.5 I = 0.7 In 1.0 I = < < In 0.5 0.0 0 20 40 Variants 1.2 I = 1.0 In 1.0 0.8 I = 0.7 In 0.6 I = << In 60 80 100 0.4 0.2 0.0 0 20 40 60 80 100 Ambient air temperature Ta °C AS Ambient air temperature Ta °C 1.4 E- I = 1.0 In 1.6 Admissible power acceptance in Watt per pole Admissible power acceptance in Watt 2.0 Basic version: - Marking of the voltage selector 115/230 - with housing and cover on the rear-side Fuseholder 2-pole 2-pole Order Number GRM1.1160.013 l GRM1.1161.023 GRM1.1180.013 l GRM1.1181.023 20 Pcs PH Packaging unit Voltage Selectors Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder Terminal 4787 IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal 4788 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal 5092 Appliance Outlet further types to GRM1 Connectors GRM1 Power entry modules without line filter www.schurter.com/pg05 Connector Overview complete 0101 IEC Connector C15A, Rewireable, Straight 0102 IEC Connector C15A, Rewireable, Straight 0102-G IEC Connector C15A, Rewireable, Angled 0112 T IEC Connector C15, Rewireable, Straight IEC Connector C13, Rewireable, Angled 4012 Connector further types to GRM1 ... Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13 3011 3012 3013 3020 ... 05.03.2013 PH AS E- Power Cord further types to GRM1 0311 OU Power Cord Overview complete The specifications, descriptions and illustrations indicated in this document are based on Connectors current information. All content is subject to modifications and amendments.