PESDxS1UB series ESD protection diodes in SOD 523 package Rev. 01 — 14 June 2004 Product data sheet 1. Product profile 1.1 General description Unidirectional ESD protection diode in a SOD523 plastic package designed to protect one transmission or data line from the damage caused by ESD (Electro Static Discharge) and other transients. 1.2 Features ■ ■ ■ ■ ■ ■ ■ Unidirectional ESD protection of one line Max. peak pulse power: PPP = 330 W at tp = 8/20 µs Low clamping voltage: VCL = 20 V at IPP = 18 A Ultra low leakage current: IRM < 700 nA ESD protection > 23 kV IEC 61000-4-2, level 4 (ESD) IEC 61000-4-5 (surge); IPP = 18 A at tp = 8/20 µs. 1.3 Applications ■ ■ ■ ■ ■ Computers and peripherals Communication systems Audio and video equipment Data lines CAN bus protection. 1.4 Quick reference data Table 1: Quick reference data Symbol Parameter VRWM reverse standoff voltage Conditions Value Unit PESD3V3S1UB 3.3 V PESD5V0S1UB 5 V PESD12VS1UB 12 V PESD15VS1UB 15 V PESD24VS1UB 24 V PESDxS1UB series Philips Semiconductors ESD protection diodes in SOD 523 package Table 1: Quick reference data …continued Symbol Parameter Conditions Cd diode capacitance VR = 0 V; f = 1 MHz Value Unit PESD3V3S1UB 207 pF PESD5V0S1UB 152 pF PESD12VS1UB 38 pF PESD15VS1UB 32 pF PESD24VS1UB 23 pF number of protected lines 1 2. Pinning information Table 2: Discrete pinning Pin Description 1 cathode 2 anode Simplified outline Symbol [1] 1 2 1 2 sym035 Top view [1] The marking bar indicates the cathode. 3. Ordering information Table 3: Ordering information Type number PESDxS1UB Package Name Description Version SC -79 plastic surface mounted package; 2 leads SOD523 4. Marking Table 4: Marking Type number Marking code PESD3V3S1UB N1 PESD5V0S1UB N2 PESD12VS1UB N3 PESD15VS1UB N4 PESD24VS1UB N5 9397 750 13313 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 01 — 14 June 2004 2 of 15 PESDxS1UB series Philips Semiconductors ESD protection diodes in SOD 523 package 5. Limiting values Table 5: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Min Max Unit PESD3V3S1UB - 330 W PESD5V0S1UB - 260 W PESD12VS1UB - 180 W PESD15VS1UB - 160 W - 160 W PESD3V3S1UB - 18 A PESD5V0S1UB - 15 A PESD12VS1UB - 5 A PESD15VS1UB - 5 A PESD24VS1UB - 3 A Tj junction temperature - 150 °C Tamb operating ambient temperature −65 +150 °C Tstg storage temperature −65 +150 °C Min Max Unit - 30 kV PPP Parameter Conditions peak pulse power 8/20 µs [1] PESD24VS1UB peak pulse current IPP [1] 8/20 µs Non-repetitive current pulse 8/20 µs exponentially decay waveform; see Figure 1. Table 6: ESD maximum ratings Symbol Parameter Conditions ESD electrostatic discharge capability IEC 61000-4-2 (contact discharge) PESD3V3S1UB - 30 kV PESD12VS1UB - 30 kV PESD15VS1UB - 30 kV PESD24VS1UB - 23 kV - 10 kV HBM MIL-STD883 Device stressed with ten non-repetitive Electro Static Discharge (ESD) pulses; see Figure 2. Table 7: ESD standards compliance ESD Standard Conditions IEC 61000-4-2, level 4 (ESD) > 15 kV (air); > 8 kV (contact) HBM MIL-STD883, class 3 > 4 kV 9397 750 13313 Product data sheet [1] PESD5V0S1UB PESDxS1UB series [1] [1] © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 01 — 14 June 2004 3 of 15 PESDxS1UB series Philips Semiconductors ESD protection diodes in SOD 523 package 001aaa631 001aaa630 120 Ipp 100 % 90 % 100 % Ipp; 8 µs Ipp (%) 80 e−t 50 % Ipp; 20 µs 40 10 % tr = 0.7 to 1 ns 0 0 10 20 30 t (µs) Fig 1. 8/20 µs pulse waveform according to IEC 61000-4-5. 60 ns Fig 2. Electro Static Discharge (ESD) pulse waveform according to IEC 61000-4-2. 9397 750 13313 Product data sheet t 30 ns 40 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 01 — 14 June 2004 4 of 15 PESDxS1UB series Philips Semiconductors ESD protection diodes in SOD 523 package 6. Characteristics Table 8: Characteristics Tamb = 25 °C unless otherwise specified. Symbol Parameter VRWM reverse standoff voltage Conditions Min Typ Max PESD3V3S1UB - - 3.3 V PESD5V0S1UB - - 5 V PESD12VS1UB - - 12 V PESD15VS1UB - - 15 V - - 24 V PESD24VS1UB IRM VBR reverse leakage current see Figure 7 PESD3V3S1UB VRWM = 3.3 V - 0.7 2 µA PESD5V0S1UB VRWM = 5 V - 0.1 1 µA PESD12VS1UB VRWM = 12 V - <1 50 nA PESD15VS1UB VRWM = 15 V - <1 50 nA PESD24VS1UB VRWM = 24 V - <1 50 nA breakdown voltage IR = 5 mA PESD3V3S1UB 5.2 5.6 6.0 V PESD5V0S1UB 6.4 6.8 7.2 V PESD12VS1UB 14.7 15.0 15.3 V PESD15VS1UB 17.6 18.0 18.4 V 26.5 27.0 27.5 V PESD3V3S1UB - 207 300 pF PESD5V0S1UB - 152 200 pF PESD12VS1UB - 38 75 pF PESD15VS1UB - 32 70 pF - 23 50 pF IPP = 1 A - - 7 V IPP = 18 A - - 20 V IPP = 1 A - - 9 V IPP = 15 A - - 20 V IPP = 1 A - - 19 V IPP = 5A - - 35 V IPP = 1 A - - 23 V IPP = 5 A - - 40 V IPP = 1 A - - 36 V IPP = 3 A - - 70 V PESD24VS1UB Cd diode capacitance VR = 0 V; f = 1 MHz; see Figure 5 and 6 PESD24VS1UB V(CL)R Unit [1] clamping voltage PESD3V3S1UB PESD5V0S1UB PESD12VS1UB PESD15VS1UB PESD24VS1UB 9397 750 13313 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 01 — 14 June 2004 5 of 15 PESDxS1UB series Philips Semiconductors ESD protection diodes in SOD 523 package Table 8: Characteristics …continued Tamb = 25 °C unless otherwise specified. Symbol Parameter Rdiff differential resistance [1] Conditions Min Typ Max Unit PESD3V3S1UB IR = 1 mA - - 400 Ω PESD5V0S1UB IR = 1 mA - - 80 Ω PESD12VS1UB IR = 1 mA - - 200 Ω PESD15VS1UB IR = 1 mA - - 225 Ω PESD24VS1UB IR = 0.5 mA - - 300 Ω Non-repetitive current pulse 8/20 µs exponentially decay waveform; see Figure 1. 9397 750 13313 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 01 — 14 June 2004 6 of 15 PESDxS1UB series Philips Semiconductors ESD protection diodes in SOD 523 package 001aaa147 104 001aaa193 1.2 Ppp Ppp (W) Ppp(25˚C) 103 0.8 (1) 102 0.4 (2) 10 1 102 10 103 0 104 0 50 100 150 tp (µs) 200 Tj (°C) Tamb = 25 °C tp = 8/20 µs exponentially decay waveform, see Figure 1. (1) PESD3V3S1UB and PESD5V0S1UB. (2) PESD12VS1UB, PESD15VS1UB; PESD24VS1UB. Fig 3. Peak pulse power dissipation as a function of pulse time; typical values. 001aaa148 240 Cd (pF) Fig 4. Relative variation of peak pulse power as a function of junction temperature; typical values. 001aaa149 50 Cd (pF) 200 40 160 30 (1) 120 20 (2) (1) (2) 80 (3) 10 40 0 0 1 2 3 4 5 0 5 10 VR (V) 15 20 25 VR (V) f = 1 MHz; Tamb = 25 °C f = 1 MHz; Tamb = 25 °C (1) PESD3V3S1UB. (1) PESD12VS1UB. (2) PESD5V0S1UB. (2) PESD15VS1UB. (3) PESD24VS1UB. Fig 5. Diode capacitance as a function of reverse voltage; typical values. Fig 6. Diode capacitance as a function of reverse voltage; typical values. 9397 750 13313 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 01 — 14 June 2004 7 of 15 PESDxS1UB series Philips Semiconductors ESD protection diodes in SOD 523 package 001aaa270 10 IR IR(25˚C) (1) 1 10−1 −100 −50 0 50 100 150 Tj (°C) (1) PESD3V3S1UB; VRWM = 3.3 V. PESD5V0S1UB; VRWM = 5 V. IR is less than 10 nA at 150 °C for: PESD12VS1UB; VRWM = 12 V. PESD15VS1UB; VRWM = 15 V. PESD24VS1UB; VRWM = 24 V. Fig 7. Relative variation of reverse leakage current as a function of junction temperature; typical values. 9397 750 13313 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 01 — 14 June 2004 8 of 15 PESDxS1UB series Philips Semiconductors ESD protection diodes in SOD 523 package ESD TESTER RZ 450 Ω RG 223/U 50 Ω coax 4 GHz DIGITAL OSCILLOSCOPE 10× ATTENUATOR 50 Ω CZ 1 D.U.T.: PESDxS1UB IEC 61000-4-2 network CZ = 150 pF; RZ = 330 Ω 2 vertical scale = 20 V/div horizontal scale = 50 ns/div vertical scale = 200 V/div horizontal scale = 50 ns/div PESD24VS1UB GND PESD15VS1UB GND PESD12VS1UB GND PESD5V0S1UB GND PESD3V3S1UB GND GND unclamped +1 kV ESD voltage waveform (IEC61000-4-2 network) clamped +1 kV ESD voltage waveform (IEC61000-4-2 network) GND GND vertical scale = 200 V/div horizontal scale = 50 ns/div unclamped −1 kV ESD voltage waveform (IEC61000-4-2 network) vertical scale = 10 V/div horizontal scale = 50 ns/div clamped −1 kV ESD voltage waveform (IEC61000-4-2 network) 006aaa001 Fig 8. ESD clamping test set-up and waveforms. 9397 750 13313 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 01 — 14 June 2004 9 of 15 PESDxS1UB series Philips Semiconductors ESD protection diodes in SOD 523 package 7. Application information The PESDxS1UB series is designed for unidirectional protection of one single data line from the damage caused by ESD (Electro Static Discharge) and Surge Pulses. The PESDxS1UB series may be used on lines where the signal polarity is above or below ground. The PESDxS1UB series provides a surge capability of up to 330 Watts per line for a 8/20 µs waveform. line to be protected (positive signal polarity) line to be protected (negative signal polarity) PESDxS1UB PESDxS1UB ground ground uni-directional protection of one line 006aaa002 Fig 9. Unidirectional protection of one line. Circuit board layout and protection device placement: Circuit board layout is critical for the suppression of ESD, EFT and Surge transients. The following guidelines are recommended: 1. Place the protection device as close to the input terminal or connector as possible. 2. The path length between the protection device and the protected line should be minimized. 3. Keep parallel signal paths to a minimum. 4. Avoid running protection conductors in parallel with unprotected conductor. 5. Minimize all printed-circuit board conductive loops including power and ground loops. 6. Minimize the length of the transient return path to ground. 7. Avoid using shared transient return paths to a common ground point. 8. Ground planes should be used whenever possible. For multilayer printed-circuit boards, use ground vias. 9397 750 13313 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 01 — 14 June 2004 10 of 15 PESDxS1UB series Philips Semiconductors ESD protection diodes in SOD 523 package 8. Package outline Plastic surface mounted package; 2 leads SOD523 A c v M A HE A D 1 E 0 0.5 1 mm scale 2 DIMENSIONS (mm are the original dimensions) bp (1) UNIT A bp c D E HE v mm 0.65 0.58 0.34 0.26 0.17 0.11 1.25 1.15 0.85 0.75 1.65 1.55 0.1 Note 1. The marking bar indicates the cathode. OUTLINE VERSION SOD523 REFERENCES IEC JEDEC JEITA SC-79 EUROPEAN PROJECTION ISSUE DATE 98-11-25 02-12-13 Fig 10. Package outline. 9397 750 13313 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 01 — 14 June 2004 11 of 15 PESDxS1UB series Philips Semiconductors ESD protection diodes in SOD 523 package 9. Packing information Table 9: Possible packing methods The indicated -xxx are the last three digits of the 12 NC ordering code. [1] Type number Package Description Packing quantity 3000 10000 PESD3V3S1UB SOD523 4 mm pitch, 8 mm tape and reel −115 −135 PESD5V0S1UB SOD523 4 mm pitch, 8 mm tape and reel −115 −135 PESD12VS1UB SOD523 4 mm pitch, 8 mm tape and reel −115 −135 PESD15VS1UB SOD523 4 mm pitch, 8 mm tape and reel −115 −135 PESD24VS1UB SOD523 4 mm pitch, 8 mm tape and reel −115 −135 [1] For further information see Section 14. 9397 750 13313 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 01 — 14 June 2004 12 of 15 PESDxS1UB series Philips Semiconductors ESD protection diodes in SOD 523 package 10. Revision history Table 10: Revision history Document ID Release date Data sheet status Change notice Order number Supersedes PESDxS1UB_series_1 20040614 Product data - 9397 750 13313 - 9397 750 13313 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 01 — 14 June 2004 13 of 15 PESDxS1UB series Philips Semiconductors ESD protection diodes in SOD 523 package 11. Data sheet status Level Data sheet status [1] Product status [2] [3] Definition I Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. III Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). [1] Please consult the most recently issued data sheet before initiating or completing a design. [2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. [3] For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. 12. Definitions 13. Disclaimers Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Life support — These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Right to make changes — Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status ‘Production’), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. 14. Contact information For additional information, please visit: http://www.semiconductors.philips.com For sales office addresses, send an email to: [email protected] 9397 750 13313 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 01 — 14 June 2004 14 of 15 Philips Semiconductors PESDxS1UB series ESD protection diodes in SOD 523 package 15. Contents 1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 9 10 11 12 13 14 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1 General description. . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Quick reference data. . . . . . . . . . . . . . . . . . . . . 1 Pinning information . . . . . . . . . . . . . . . . . . . . . . 2 Ordering information . . . . . . . . . . . . . . . . . . . . . 2 Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3 Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Application information. . . . . . . . . . . . . . . . . . 10 Package outline . . . . . . . . . . . . . . . . . . . . . . . . 11 Packing information. . . . . . . . . . . . . . . . . . . . . 12 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 13 Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 14 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Contact information . . . . . . . . . . . . . . . . . . . . 14 © Koninklijke Philips Electronics N.V. 2004 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 14 June 2004 Document order number: 9397 750 13313 Published in The Netherlands