21.59 [.850] MAX 31.12 [1.225] 8 1 8 13.80 [.543] 1 3.20±0.30 [.126±.012] 13.97 [.550] 10.89 [.429] 25.40±0.13 [1.000±.005] RECOMMENDED PCB LAYOUT - COMPONENT SIDE VIEW EMPFOHLENER FUER LEITERPLATTE - BESTUCKUNGSSEITE ALL TOLERANCES ±0.05 UNLESS NOTED 24.13 [.950] 12.70 [.500] 2.54 [.100] 2.54 [.100] 10.16 [.400] 1.27 [.050] ˚.035±.003] X16 8 1 ˚.063±.003] X3 25.40 [1.000] 2.73 [.107] 2.73 [.107] 10.16 [.400] ˚1.60±0.07 [ 1 ˚.128±.003] X2 3.68 [.145] ˚3.25±0.07 [ 8 8.89 [.350] ˚0.89±.07 [ NOTE 1: ONE REAR SHIELD TAB CENTERED MECHANICAL CHARACTERISTICS DURABILITY: 1000 MATING CYCLES ELECTRICAL CHARACTERISTICS CONTACT RESISTANCE: 30 MILLIOHMS MAX OPERATING TEMPERATURE: 0˚C TO 70˚C NOTE 2: PANEL GROUND FLANGES BOTH SIDES, BOTTOM AND TOP (GF5) Information: Tolerances ISO 2768 Consider protection memo from DIN 34 MATERIALS AND FINISH HOUSING: GLASS FILLED POLYESTER UL 94 V-0 BLACK SHIELDING: Cu ALLOY, PLATED WITH Ni CONTACTS: PHOSPHOR BRONZE CONTACT FINISH: Au, 0.8 µm (30 µin) OVER Ni TERMINAL FINISH: SnPb m Designation MOD JACK - MJIM prior notice. Drawing will not be updated. 8P8T, 1X2, INTEGRATED MAGNETICS 203156 www.ERNI.com b Rev. 19FEB04 Change No. Date - All Dimensions in mm Subject to modification without All rights reserved. Only for information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. 2:1 Scale MAT'L SK H Nam e Plot At - Group/Type MAXM J ELECTRICAL SCHEMATIC M3D01 ELEKTRISCHES DIAGRAMM PC B CABL E J1 P1 CT P4 P2 J2 P3 J3 CT P5 P6 J6 N/C P7 J4,5 GND P8 J7,8 1000pF/2KV 4X 75 W RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN AUSSCHNITT 14.89 [.586] 0.38±0.10 [.015±.004] 32.22±0.20 [1.269±.008] TOP OF PCB LP MAGNETICS SPECIFICATIONS @ 25˚C AUTO MDIX COMPATIBLE TURNS RATIO: (P1-P2 : J1-J2) 1CT : 1 ±3% (P3-P6 : J3-J6) 1CT : 1 ±3% OCL(100 KHz, 0.1 Vrms, 8 mA) (P1-P2 : P3-P6) 350µH MIN INSERTION LOSS: 0.1-100 MHz RETURN LOSS: 0.5 - 30 MHz: 40 MHz: 50 MHz 60 - 80 MHz CROSSTALK: 1-100 MHz 0.9 OHMS MAX -1.1 dB MAX -18 dB MIN -15.5 dB MIN -13.6 dB MIN -12 dB MIN INFORMATION: Tolerances 2:1 Scale - MAT'L All Dimensions - in mm [in] -40 dB TYP CMR: 0.1 - 30 MHz 30 - 60 MHz 60 - 100 MHz -50 dB TYP -40 dB TYP -35 dB TYP ISOLATION 1500 Vrms Consider protection memo from DIN 34 DCR (P1-P2, P3-P6) All rights reserved. Only for information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Subject to modification without Designation MOD JACK - MJIM prior notice. Drawing will not be updated. 8P8T, 1X2, INTEGRATED MAGNETICS 203156 www.ERNI.com www.ERNI.com b 19FEB04 Index Date Group/Type MAXM J I