4V Drive Pch MOSFET RRF015P03 Structure Silicon P-channel MOSFET Dimensions (Unit : mm) 0.2Max. TUMT3 Features 1) Low On-resistance. 2) High power package. 3) 4V drive. Abbreviated symbol : UJ Application Switching Packaging specifications Inner circuit Package Type Code Basic ordering unit (pieces) RRF015P03 Taping TL 3000 (3) ∗2 (1) ∗1 Absolute maximum ratings (Ta = 25C) Parameter Symbol Limits Unit Drain-source voltage VDSS 30 V Gate-source voltage VGSS 20 V Drain current Source current (Body Diode) 1.5 A 6 0.6 A A Continuous ID Pulsed Continuous IDP IS *1 Pulsed ISP *1 6 A PD *2 0.8 W Tch Tstg 150 55 to +150 C C Symbol Limits Unit 156 C / W Power dissipation Channel temperature Range of storage temperature (1) Gate (2) Source (3) Drain (2) ∗1 ESD PROTECTION DIODE ∗2 BODY DIODE *1 Pw10s, Duty cycle1% *2 Mounted on a ceramic board. Thermal resistance Parameter Channel to Ambient Rth (ch-a)* * Mounted on a ceramic board. www.rohm.com ©2010 ROHM Co., Ltd. All rights reserved. 1/5 2010.08 - Rev.A RRF015P03 Data Sheet Electrical characteristics (Ta = 25C) Parameter Symbol Min. Typ. Max. Unit IGSS - - 10 A Gate-source leakage VGS=20V, VDS=0V 30 - - V ID=1mA, V GS=0V IDSS - - 1 A VDS=30V, VGS=0V VGS (th) 1.0 - 2.5 V - 115 160 ID=1.5A, VGS=10V m ID=0.7A, VGS=4.5V Drain-source breakdown voltage V(BR)DSS Zero gate voltage drain current Gate threshold voltage Conditions VDS=10V, ID=1mA Static drain-source on-state resistance RDS (on)* - 170 240 - 190 270 Forward transfer admittance l Yfs l* 1.2 - - S ID=1.5A, VDS=10V Input capacitance Ciss - 230 - pF VDS=10V Output capacitance Coss - Reverse transfer capacitance Crss Turn-on delay time td(on) * - ID=0.7A, VGS=4V 40 - pF VGS=0V 33 - pF f=1MHz 12 - ns ID=0.7A, VDD 15V tr * - 8 - ns VGS=10V td(off) * - 40 - ns RL 21.4 tf * - 13 - ns RG=10 Total gate charge Qg * - 3.2 - nC ID=1.5A, VDD 15V Gate-source charge Qgs * Gate-drain charge Qgd * - 1.2 0.7 - nC nC VGS=5V RL 10 RG=10 Rise time Turn-off delay time Fall time *Pulsed Body diode characteristics (Source-Drain) (Ta = 25C) Parameter Forward Voltage Symbol VSD * Min. Typ. Max. Unit - - 1.2 V Conditions Is=1.5A, VGS=0V *Pulsed www.rohm.com ©2010 ROHM Co., Ltd. All rights reserved. 2/5 2010.08 - Rev.A Data Sheet RRF015P03 Electrical characteristic curves VGS= 10V VGS= 4.5V VGS= 4.0V VGS= 3.0V 2 1 VGS= 2.5V 10 2 VGS= 3.0V VGS= 10V VGS= 4.5V VGS= 4.0V 1 0.6 0.8 1 0 DRAIN-SOURCE VOLTAGE : VDS[V] 1000 STATIC DRAIN-SOURCE ON-STATE RESISTANCE : RDS(on)[mΩ] STATIC DRAIN-SOURCE ON-STATE RESISTANCE : RDS(on)[mΩ] Fig.1 Typical Output Characteristics( Ⅰ) Ta=25°C Pulsed VGS= 4.0V VGS= 4.5V VGS= 10V 100 10 0.1 1 2 0.1 0.01 0 10 100 10 10 DRAIN-CURRENT : ID[A] Fig.7 Static Drain-Source On-State Resistance vs. Drain Current( Ⅳ) 2 3 4 Fig.2 Typical Output Characteristics( Ⅱ) Fig.3 Typical Transfer Characteristics VGS= 10V Pulsed Ta= 125°C Ta= 75°C Ta= 25°C Ta= 25°C 1 1000 VGS= 4.5V Pulsed 10 10 0.1 1 10 DRAIN-CURRENT : ID[A] VDS= 10V Pulsed 1 Ta= 25°C Ta=25°C Ta=75°C Ta=125°C 0.1 0.01 Ta= 125°C Ta= 75°C Ta= 25°C Ta= 25°C 100 DRAIN-CURRENT : ID[A] 10 1 GATE-SOURCE VOLTAGE : VGS[V] 0.1 FORWARD TRANSFER ADMITTANCE : |Yfs| [S] STATIC DRAIN-SOURCE ON-STATE RESISTANCE : RDS(on)[mΩ] 8 Fig.5 Static Drain-Source On-State Resistance vs. Drain Current( Ⅱ) Ta= 125°C Ta= 75°C Ta= 25°C Ta= 25°C www.rohm.com ©2010 ROHM Co., Ltd. All rights reserved. 6 10 10 1 Ta= 125°C Ta= 75°C Ta= 25°C Ta= 25°C DRAIN-SOURCE VOLTAGE : VDS[V] DRAIN-CURRENT :ID[A] 0.1 4 100 Fig.4 Static Drain-Source On-State Resistance vs. Drain Current( Ⅰ) VGS= 4.0V Pulsed 1 STATIC DRAIN-SOURCE ON-STATE RESISTANCE : RDS(on)[mΩ] 0.4 Fig.6 Static Drain-Source On-State Resistance vs. Drain Current( Ⅲ) SOURCE CURRENT : Is [A] 0.2 VDS= 10V Pulsed 0.001 0 0 1000 Ta=25°C Pulsed VGS= 2.5V 0 1000 DRAIN CURRENT : ID[A] 3 Ta=25°C Pulsed DRAIN CURRENT : ID[A] DRAIN CURRENT : ID[A] 3 10 VGS=0V Pulsed 1 Ta= 125°C Ta= 75°C Ta= 25°C Ta= 25°C 0.1 0.01 0.1 1 10 DRAIN-CURRENT : ID[A] Fig.8 Forward Transfer Admittance vs. Drain Current 3/5 0 0.5 1 1.5 SOURCE-DRAIN VOLTAGE :VSD [V] Fig.9 Reverse Drain Current vs. Sourse-Drain Voltage 2010.08 - Rev.A Data Sheet Ta=25°C Pulsed 400 ID= 1.5A 300 ID=0.7A 200 100 tf 100 10 td(on) tr 0 1 0 5 10 15 GATE-SOURCE VOLTAGE : VGS[V] Fig.10 Static Drain-Source On-State Resistance vs. Gate Source Voltage 1000 CAPACITANCE : C [pF] td(off) 10 Ta=25°C VDD=15V VGS=10V RG=10Ω Pulsed Ciss 0.01 0.1 1 10 DRAIN-CURRENT : ID[A] Fig.11 Switching Characteristics GATE-SOURCE VOLTAGE : VGS [V] 1000 500 SWITCHING TIME : t [ns] STATIC DRAIN-SOURCE ON-STATE RESISTANCE : RDS(ON)[mΩ] RRF015P03 8 6 Ta=25°C VDD= 15V ID= 1.5A RG=10Ω Pulsed 4 2 0 0 1 2 3 4 5 6 7 TOTAL GATE CHARGE : Qg [nC] Fig.12 Dynamic Input Characteristics Ta=25°C f=1MHz VGS=0V 100 Crss Coss 10 0.01 0.1 1 10 100 DRAIN-SOURCE VOLTAGE : VDS[V] Fig.13 Typical Capacitance vs. Drain-Source Voltage www.rohm.com ©2010 ROHM Co., Ltd. All rights reserved. 4/5 2010.08 - Rev.A RRF015P03 Data Sheet Measurement circuits Pulse Width ID VDS VGS VGS 10% 50% RL D.U.T. 10% VDD RG 50% 90% VDS 10% 90% td(on) tr ton Fig.1-1 Switching time measurement circuit 90% td(off) tf toff Fig.1-2 Switching Waveforms VG ID VDS VGS RL D.U.T. IG(Const.) RG Qg VGS Qgs Qgd VDD Charge Fig.2-1 Gate charge measurement circuit Fig.2-2 Gate Charge Waveform Notice This product might cause chip aging and breakdown under the large electrified environment. Please consider to design ESD protection circuit. www.rohm.com ©2010 ROHM Co., Ltd. All rights reserved. 5/5 2010.08 - Rev.A Notice Data Sheet Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com www.rohm.com © 2010 ROHM Co., Ltd. rights reserved. ©2010 ROHM Co., Ltd. AllAll rights reserved. R1010A Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2010 ROHM Co., Ltd. All rights reserved. R1010A