LDS-0215

2N7335
Qualified Levels:
JAN, JANTX, and
JANTXV
QUAD P-CHANNEL MOSFET
Available on
commercial
versions
Qualified per MIL-PRF-19500/599
DESCRIPTION
This 2N7335 device is military qualified up to a JANTXV level for high-reliability applications.
Microsemi also offers numerous other products to meet higher and lower power voltage
regulation applications.
Important: For the latest information, visit our website http://www.microsemi.com.
FEATURES
•
MO-036AB
Package
JEDEC registered 2N7335.
•
JAN, JANTX, and JANTXV qualifications are available per MIL-PRF-19500/599.
•
RoHS compliant version available (commercial grade only).
APPLICATIONS / BENEFITS
•
•
•
High Frequency Operation.
Lightweight.
ESD to class 1A.
MAXIMUM RATINGS @ TA = +25 ºC unless otherwise noted.
Parameters / Test Conditions
Symbol
Operating & Storage Temperature
Thermal Resistance, Junction to Ambient
Thermal Resistance, Junction to Case
Top , Tstg
1 die
4 die
1 die
R ӨJA
R ӨJC
Value
Unit
-55 to +150
°C
90
50
17
ºC/W
ºC/W
Gate – Source Voltage
V GS
± 20
V
Continuous Drain Current @ TC = +25 °C
I D1
-0.75
A
Continuous Drain Current @ TC = +100 °C
(1)
Max. Power Dissipation @ TC = +25ºC (free air)
(1, 2)
Maximum Drain to Source On State Resistance
@ TJ = +25 ºC
@ TJ = +150 ºC
Collector Efficiency
I D2
-0.50
A
P D1
1.4
W
MAX R ds(on)
Ω
IS
1.4
2.5
-0.75
Single Pulse Avalanche Energy Capability
E AS
75
mJ
Repetitive Avalanche Energy Capability
E AR
.14
mJ
Rated Avalanche Current (repetitive and nonrepetitive)
I AR
-.075
A
Off-State Current
I DM
-3.0
A (pk)
Notes: 1. Derated Linearly by 11 mW/°C for T C > +25 °C.
2. V GS = -10 V, I D = -0.5 A.
T4-LDS-0215, Rev. 1 (120481)
©2012 Microsemi Corporation
A
MSC – Lawrence
6 Lake Street,
Lawrence, MA 01841
Tel: 1-800-446-1158 or
(978) 620-2600
Fax: (978) 689-0803
MSC – Ireland
Gort Road Business Park,
Ennis, Co. Clare, Ireland
Tel: +353 (0) 65 6840044
Fax: +353 (0) 65 6822298
Website:
www.microsemi.com
Page 1 of 6
2N7335
MECHANICAL and PACKAGING
•
•
•
•
•
•
CASE: Ceramic, lid: alloy 42, Au over Ni plating.
TERMINALS: Alloy 42, Au over Ni plating, solder dipped.
MARKING: Manufacturer’s ID, part number, date code.
POLARITY: See package outline.
WEIGHT: Approx. 1.3 grams.
See Package Dimensions on last page.
PART NOMENCLATURE
JAN
2N7335
(e3)
Reliability Level
JAN=JAN level
JANTX=JANTX level
JANTXV=JANTXV level
Blank = Commercial
RoHS Compliance
e3 = RoHS compliant (available
on commercial grade only)
Blank = non-RoHS compliant
JEDEC type number
(See Electrical Characteristics
table)
SYMBOLS & DEFINITIONS
Definition
Symbol
ID
IF
TC
V DD
V DS
V GS
Drain current.
Forward current.
Case temperature.
Drain supply voltage.
Drain to source voltage.
Gate to source voltage.
T4-LDS-0215, Rev. 1 (120481)
©2012 Microsemi Corporation
Page 2 of 6
2N7335
ELECTRICAL CHARACTERISTICS @ T A = +25°C, unless otherwise noted
Parameters / Test Conditions
OFF CHARACTERTICS
Drain-Source Breakdown Voltage
V GS = 0 V, I D = -1m A
Gate-Source Voltage (Threshold)
V DS ≥ V GS , I D = -0.25mA
V DS ≥ V GS , I D = -0.25 mA, T j = +125 °C
V DS ≥ V GS , I D = -0.25 mA, T j = -55 °C
Gate Current
V GS = ±20 V, V DS = 0 V
V GS = ±20 V, V DS = 0 V, T j = +125 °C
Drain Current
V GS = 0 V, V DS = 80 % of rated V DS
V GS = 0 V, V DS = 80 % of rated V DS , T j = +125 °C
Static Drain-Source On-State Resistance
V GS = -10 V, cond. A pulsed per MIL-STD-750, sect. 4, I D = -0.50 A
T j = +125 °C
V GS = -10 V, pulsed per MIL-STD-750, section 4, I D = -0.50 A
Diode Forward Voltage
V GS = 0 V, I D = -0.75 A, pulsed per MIL-STD-750, section 4
DYNAMIC CHARACTERISTICS
Parameters / Test Conditions
Gate Charge:
Condition B
On-State Gate Charge
Gate to Source Charge
Gate to Drain Charge
SWITCHING CHARACTERISTICS
Parameters / Test Conditions
Switching time tests:
I D = -0.75 A, V GS = -10 V,
Turn-on delay time
Rinse time
Gate drive impedance = 7.5 Ω,
Turn-off delay time
V DD = -50 V
Fall time
Diode Reverse Recovery Time
T4-LDS-0215, Rev. 1 (120481)
di/dt ≤ -100 A/µs, V DD ≤ -30 V, I D = -.75
A
©2012 Microsemi Corporation
Symbol
Min.
V (BR)DSS
-100
V GS(th)1
V GS(th)2
V GS(th)3
-2.0
-1.0
Max.
Unit
V
-4.0
V
-5.0
I GSS1
I GSS2
±100
±200
nA
I DSS1
I DSS2
-25
-0.25
µA
mA
r DS(on)1
1.4
Ω
r DS(on)2
2.3
Ω
V SD
5.5
V
Max.
Unit
Symbol
Min.
Q g(on)
Q gs
Q gd
Symbol
15
7.0
8.0
Min.
Max.
t d(on)
tr
t d(off)
tf
30
60
70
80
t rr
200
nC
Unit
ns
ns
Page 3 of 6
2N7335
NEGATIVE ID DRAIN CURRENT (AMPERES)
GRAPHS
T C CASE TEMPERATURE (°C)
THERMAL RESPONSE (ZTHJA)
FIGURE 1 – Maximum Drain Current vs. Case Temperature Graph
T1 RECTANGULAR PULSE DURATION (SEC)
FIGURE 2 – Normalized Transient Thermal Impedance
T4-LDS-0215, Rev. 1 (120481)
©2012 Microsemi Corporation
Page 4 of 6
2N7335
NEGATIVE ID, DRAIN CURRENT (AMPERES)
GRAPHS (continued)
NEGATIVE V DS , DRAIN-TO-SOURCE VOLTAGE (VOLTS)
FIGURE 3 – Maximum Safe Operating Area
T4-LDS-0215, Rev. 1 (120481)
©2012 Microsemi Corporation
Page 5 of 6
2N7335
PACKAGE DIMENSIONS
Dimensions
Symbol
Inches
Dimensions
Millimeters
Notes
Symbol
Inches
Millimeters
Min
Max
Min
Max
BH
.105
.175
2.67
4.45
BL
.690
.770
17.53
19.56
BW
.290
.325
7.37
8.26
LL
.125
.175
3.18
4.45
BW 1
.280
.310
7.11
7.87
10
LL 1
.000
.030
0.00
0.76
LH
.025
.055
0.64
1.40
11
α
0°
15°
0°
15°
LT
.008
.012
0.203
0.305
R
.010
LW
.015
.021
0.381
0.533
S
.030
LW 1
.038
.060
0.97
1.52
N
Min
11
Max
Min
Notes
Max
LS
.300 TP
7.62 TP
5, 6
LS1
.100 TP
2.54 TP
5, 6
11
7
0.25
.095
14
0.76
2.41
14
8
NOTES:
1.
2.
3.
4.
5.
6.
7.
8.
9.
Dimensions are in inches.
Millimeters are given for general information only.
Refer to applicable symbol list.
Dimensioning and tolerancing in accordance with ASME Y14.5.
Leads within +/- .005 inch (0.13 mm) radius of True Position (TP) at gauge plane with maximum material condition and unit installed.
LS 1 and LS applies in zone LL 1 when unit installed.
α applies to spread leads prior to installation.
N is the number of terminal positions.
Outlines on which the seating plane is coincident with the base plane (A 1 = 0), terminals lead standoffs are not required, and LW1 may equal
LW along any part of the lead above the seating/base plane.
10. BW 1 does not include particles of package materials.
11. This dimension shall be measured with the device seated in the seating plane gauge JEDEC Outline No. GS-3.
T4-LDS-0215, Rev. 1 (120481)
©2012 Microsemi Corporation
Page 6 of 6