RSX201L-30 Diodes Shottky barrier diode RSX201L-30 zExternal dimensions (Unit : mm) zApplication High efficient shottky barrier diode. Rectifier for power supply units. Battery protection against reversal current CATHODE MARK 1 2 2.6±0.2 0.1±0.02 0.1 5.0±0.3 5 4 zFeatures 1) Small mold type power diode (PMDS (4526) ) 2) High reliability (ESD resistance typ=22kV (machine model) ) 3) Low VF / Low IR (VF=0.39V at 2A / IR=50µA at 30V) 4.5±0.2 1.2±0.3 1.5±0.2 2.0±0.2 ROHM : PMDS EIAJ : − 1 2 Manufacturing date EX2003.9 JEDEC : 3.9 zStructure Silicon Epitaxial Planer zAbsolute maximum ratings (Ta=25°C) Parameter Reverse voltage (repetitive peak) Reverse voltage (DC) Average rectified forward current Forward peak surge current (60Hz / 1cyc.) Junction temperature Storage temperature Symbol VRM VR IO IFSM Tj Tstg Limits 30 30 2 60 150 −40 to 150 Unit V V A A °C °C zElectrical characteristics (Ta=25°C) Parameter Forward voltage Reverse current Capacitance between terminals Electro static discharge resistance Symbol VF IR CT ESD Min. − − − − Typ. 0.39 50 120 22 Max. 0.44 150 − − Unit V µA pF kV Conditions IF=2A VR=30V VR=10V, f=1MHz C=200pF, R=0Ω 1pulse 1/2 RSX201L-30 Diodes zElectrical characteristic curves (Ta=25°C) 100000 10 1 0 100 200 300 400 1000 Ta=75°C 100 Ta=25°C 10 Ta= −25°C 1 0.1 500 0 10 20 1000 100 10 30 f=1MHz Ta=25°C 0 10 20 30 REVERSE VOLTAGE : VR (V) REVERSE VOLTAGE : VR (V) Fig.1 Forward Temperature Characteristics Fig.2 Reverse Temperature Characteristics Fig.3 Capacitance Between Terminals Characteristics PMDS Rth (j-a) =94°C / W When mounted on a glass epoxy board. θ (j-a) (°C / W) Ta=125°C FORWARD VOLTAGE : VF (mV) 1000 100 10 1 0.1 10000 TERMINAL CAPACITANCE : CT (pF) 100 10000 Ta=150°C 1 10 100 1000 It (s) Fig.4 Thermal resistance 4.0 0A 3.5 IO 0V DC VR t 3.0 T 2.5 D=t / T VR=15V Tj=150°C D=1 / 2 2.0 Sin (θ=180) 1.5 1.0 0.5 0.0 200 0 25 50 75 100 125 150 AMBIENT TEMPERATURE : Ta (°C) Fig.5 Derating curve (IO-Ta) AVERAGE RECTIFIED FOWARD CURRENT : IO (A) 1000 REVERSE CURRENT : IR (µA) Ta=150°C Ta=125°C Ta=75°C Ta=25°C Ta= −25°C AVERAGE RECTIFIED FOWARD CURRENT : IO (A) FORWARD CURRENT : IF (mA) 10000 4.0 3.5 DC 3.0 2.5 D=1 / 2 2.0 Sin (θ=180) 1.5 1.0 IO 0V VR t 0.5 0.0 0A T 0 25 D=t / T VR=15V Tj=150°C 50 75 100 125 150 CASE TEMPERATURE : Tc (°C) Fig.6 Derating curve (IO-Tc) 30 Ta=25°C 30kV Over 25 150 8.3ms 8.3ms 20 ESD (kV) IFSM (A) 1cyc. 100 15 Ta=25°C 1pulse 10 50 5 0 0 10 100 200pF 0Ω 100pF 1.5kΩ Machine Model Humanbody Model 0 N (Cyc) Fig.7 Forward peak surge current (Acctual data) Fig.8 ESD resistance 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document use silicon as a basic material. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.0