5-1-2 Bicolor lamps ■3.3 × 6 Bow Shaped Bicolor LEDs SML70023 Series (available as Direct Mount) Part Number Emitting Color A: Red B: Green A: Red SML72923C B: Orange A: Amber SML78423C B: Green A: Orange SML79423C B: Green A: Ultrahigh luminosity orange SMLS79723C B: Yellow A: Ultrahigh luminosity red SMLU76423C-S B: Green A: Red SMLU72423C-S Ultrahigh B: Green luminosity A: Orange SMLU79423C-S B: Green SML72423C Lens Color Water clear Water clear Water clear Water clear Water clear Water clear Water clear Water clear Forward Voltage Luminous Intensity Peak Wavelength Dominant Wavelength Spectrum Half Bandwidth Iv λP λd ∆λ Conditions Conditions Conditions Conditions Conditions VF (nm) (nm) (nm) (mcd) IF (mA) IF (mA) IF (mA) IF (mA) IF (mA) (V) TYP MAX TYP TYP TYP TYP 1.9 2.5 10 25 20 630 10 620 10 35 10 2.0 2.5 10 35 20 560 10 567 10 20 10 1.9 2.5 10 25 20 630 10 620 10 35 10 1.9 2.5 10 25 20 587 10 590 10 33 10 1.9 2.5 10 25 20 610 10 605 10 35 10 2.0 2.5 10 35 20 560 10 567 10 20 10 1.9 2.5 10 25 20 587 10 590 10 33 10 2.0 2.5 10 35 20 560 10 567 10 20 10 2.0 2.5 10 150 20 590 10 590 10 15 10 2.0 2.5 10 40 20 570 10 571 10 30 10 2.0 2.5 20 26 3 650 20 639 20 20 20 2.0 2.5 20 3.8 3 560 20 567 20 20 20 2.0 2.5 20 120 20 635 20 625 20 15 20 2.2 2.5 20 30 20 560 20 567 20 15 20 2.0 2.5 10 150 20 590 20 590 10 15 20 2.2 2.5 10 30 20 560 20 567 10 15 20 Chip Material GaAsP GaP GaAsP GaAsP GaAsP GaP GaAsP GaP AlGaInP GaP AlGaInP GaP AlGaInP AlGaInP AlGaInP AlGaInP Remark Cathode common Cathode common Cathode common Cathode common Cathode common Cathode common Cathode common Cathode common *Mass production in preparation External Dimensions Directional Characteristics (representative example) (Unit: mm) A 0° 30° 60° 90° 100% 30° 60° 50 0 50 90° 100% 30° 60° 90° 100% 60° 50 0 50 90° 100% 3.1±0.2 0.65max 0.5±0.1 0.5±0.1 (2.54) (2.54) 3.6 0° 20.0min B 1.0min 1.5min 30° 5.8±0.5 3.9 6.0±0.2 3.6±0.2 Resin burr 0.3max Resin heap 1.5max Dimensional Tolerance: ±0.3 6.2 Internal Circuit Drawing Product Mass: Approx. 0.26 g LEDs 247 5-1 Visible Light LEDs Absolute Maximum Ratings ●Visible Light Unicolor Lamp Parameter Unit PD IF ∆IF IFP VR Top Tstg mW mA mA/°C mA V °C °C Ratings GaP GaAsP GaAlAs AlGaInP InGaN 75 Conditions GaN 120 30 −0.45 25°C or higher f=1kHz, tw≤100 µ s 70 100 3 5 −30 to +80 −30 to +85 −30 to +100 ●Visible Light Bicolor Lamp Parameter Unit PD IF ∆IF IFP VR Top Tstg mW mA mA/°C mA V °C °C GaP Ratings GaAlAs GaAsP 75 AlGaInP Conditions InGaN 120 Same conditions for simultaneous lighting 30 −0.45 100 25°C or higher f=1kHz, tw≤100 µ s 4 5 −30 to +85 −30 to +100 ●Visible Light Unicolor Surface Mount LEDs Parameter Unit IF ∆IF IFP VR Top Tstg mA mA/°C mA V °C °C Ratings GaP GaAsP GaAlAs AlGaInP InGaN Conditions GaN 20 −0.27 70*2 30 −0.45 100*1 25°C or higher f=1kHz, tw≤100 µs 5 3 −30 to +85 −30 to +100 −30 to +80 *1: 70mA for SEC1005/1007 Series *2: 50mA for SEC1005/1007 Series ●Visible Light Bicolor Surface Mount LEDs Ratings Parameter Unit PD mW IF ∆IF IFP VR Top Tstg mA mA/°C mA V °C °C Conditions SEC2002/2004 75 (Same conditions for simultaneous lighting) 30 −0.45 70 4 −30 to +85 −30 to +100 25°C or higher f=1kHz, tw≤100 µs ●Visible Light Three Element Surface Mount LEDs Parameter 218 PD mW IF ∆IF IFP VR Top Tstg mA mA/°C mA V °C °C LEDs Ratings SECT3M02C-S Unit Conditions Red Green/Blue 75 120 30 −0.45 50 70 5 −30 to +80 −30 to +100 When one chip lights up (same as green/blue for simultaneous lighting) 25°C or higher f=1kHz, tw≤100 µs