54F/74F64 4-2-3-2-Input AND-OR-Invert Gate General Description This device contains gates configured to perform a 4-2-3-2 input AND-OR-INVERT function. Commercial Package Number Military Package Description N14A 14-Lead (0.300× Wide) Molded Dual-In-Line 54F64DM (Note 2) J14A 14-Lead Ceramic Dual-In-Line M14A 14-Lead (0.150× Wide) Molded Small Outline, JEDEC 54F64FM (Note 2) W14B 14-Lead Cerpack 54F64LM (Note 2) E20A 20-Lead Ceramic Leadless Chip Carrier, Type C 74F64PC 74F64SC (Note 1) Note 1: Devices also available in 13× reel. Use suffix e SCX. Note 2: Military grade device with environmental and burn-in processing. Use suffix e DMQB, FMQB and LMQB. Logic Symbol Connection Diagrams Pin Assignment for DIP, SOIC and Flatpak IEEE/IEC Pin Assignment for LCC TL/F/9467 – 2 TL/F/9467 – 1 TL/F/9467–3 Unit Loading/Fan Out 54F/74F Pin Names An, Bn, Cn, Dn O Description Inputs Output U.L. HIGH/LOW Input IIH/IIL Output IOH/IOL 1.0/1.0 50/33.3 20 mA/b0.6 mA b 1 mA/20 mA TRI-STATEÉ is a registered trademark of National Semiconductor Corporation. C1995 National Semiconductor Corporation TL/F/9467 RRD-B30M105/Printed in U. S. A. 54F/74F64 4-2-3-2-Input AND-OR-Invert Gate November 1994 Absolute Maximum Ratings (Note 1) Recommended Operating Conditions If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/Distributors for availability and specifications. Storage Temperature b 65§ C to a 150§ C Ambient Temperature under Bias Junction Temperature under Bias Plastic b 55§ C to a 125§ C Free Air Ambient Temperature Military Commercial b 55§ C to a 125§ C 0§ C to a 70§ C Supply Voltage Military Commercial b 55§ C to a 175§ C b 55§ C to a 150§ C a 4.5V to a 5.5V a 4.5V to a 5.5V VCC Pin Potential to Ground Pin b 0.5V to a 7.0V b 0.5V to a 7.0V Input Voltage (Note 2) b 30 mA to a 5.0 mA Input Current (Note 2) Voltage Applied to Output in HIGH State (with VCC e 0V) b 0.5V to VCC Standard Output b 0.5V to a 5.5V TRI-STATEÉ Output Current Applied to Output in LOW State (Max) twice the rated IOL (mA) Note 1: Absolute maximum ratings are values beyond which the device may be damaged or have its useful life impaired. Functional operation under these conditions is not implied. Note 2: Either voltage limit or current limit is sufficient to protect inputs. DC Electrical Characteristics Symbol 54F/74F Parameter Min VIH Input HIGH Voltage VIL Input LOW Voltage Typ Units VCC Conditions Max 2.0 V Recognized as a HIGH Signal 0.8 V Recognized as a LOW Signal b 1.2 V Min IIN e b18 mA V Min IOH e b1 mA IOH e b1 mA IOH e b1 mA IOL e 20 mA IOL e 20 mA VCD Input Clamp Diode Voltage VOH Output HIGH Voltage 54F 10% VCC 74F 10% VCC 74F 5% VCC VOL Output LOW Voltage 54F 10% VCC 74F 10% VCC 0.5 0.5 V Min IIH Input HIGH Current 54F 74F 20.0 5.0 mA Max VIN e 2.7V IBVI Input HIGH Current Breakdown Test 54F 74F 100 7.0 mA Max VIN e 7.0V ICEX Output High Leakage Current 54F 74F 250 50 mA Max VOUT e VCC VID Input Leakage Test 74F V 0.0 IID e 1.9 mA All Other Pins Grounded IOD Output Leakage Circuit Current 74F 3.75 mA 0.0 VIOD e 150 mV All Other Pins Grounded IIL Input LOW Current 2.5 2.5 2.7 4.75 b 60 b 0.6 mA Max VIN e 0.5V b 150 mA Max VOUT e 0V IOS Output Short-Circuit Current ICCH Power Supply Current 1.9 2.8 mA Max VO e HIGH ICCL Power Supply Current 3.1 4.7 mA Max VO e LOW 2 AC Electrical Characteristics Symbol tPLH tPHL Parameter Propagation Delay An, Bn, Cn, Dn to O 74F 54F 74F TA e a 25§ C VCC e a 5.0V CL e 50 pF TA, VCC e Mil CL e 50 pF TA, VCC e Com CL e 50 pF Min Typ Max Min Max Min Max 2.5 1.5 4.6 3.2 6.5 4.5 2.5 1.5 8.5 6.5 2.5 1.5 7.5 5.5 Units ns Ordering Information The device number is used to form part of a simplified purchasing code where the package type and temperature range are defined as follows: 74F 64 S Temperature Range Family 74F e Commercial 54F e Military C X Special Variations QB e Military grade device with environmental and burn-in processing X e Devices shipped in 13× reel Device Type Package Code P e Plastic DIP D e Ceramic DIP F e Flatpak L e Leadless Chip Carrier (LCC) S e Small Outline SOIC Temperature Range C e Commercial (0§ C to a 70§ C) M e Military (b55§ C to a 125§ C) 3 Physical Dimensions inches (millimeters) 20-Lead Ceramic Leadless Chip Carrier (L) NS Package Number E20A 14-Lead Ceramic Dual-In-Line Package (D) NS Package Number J14A 4 Physical Dimensions inches (millimeters) (Continued) 14-Lead (0.150× Wide) Molded Small Outline, JEDEC (S) NS Package Number M14A 14-Lead (0.300× Wide) Molded Dual-In-Line Package (P) NS Package Number N14A 5 54F/74F64 4-2-3-2-Input AND-OR-Invert Gate Physical Dimensions inches (millimeters) (Continued) 14-Lead Ceramic Flatpak (F) NS Package Number W14B LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. National Semiconductor Corporation 1111 West Bardin Road Arlington, TX 76017 Tel: 1(800) 272-9959 Fax: 1(800) 737-7018 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. National Semiconductor Europe Fax: (a49) 0-180-530 85 86 Email: cnjwge @ tevm2.nsc.com Deutsch Tel: (a49) 0-180-530 85 85 English Tel: (a49) 0-180-532 78 32 Fran3ais Tel: (a49) 0-180-532 93 58 Italiano Tel: (a49) 0-180-534 16 80 National Semiconductor Hong Kong Ltd. 13th Floor, Straight Block, Ocean Centre, 5 Canton Rd. Tsimshatsui, Kowloon Hong Kong Tel: (852) 2737-1600 Fax: (852) 2736-9960 National Semiconductor Japan Ltd. Tel: 81-043-299-2309 Fax: 81-043-299-2408 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.