2SC4881 TOSHIBA Transistor Silicon NPN Epitaxial Type 2SC4881 High-Current Switching Applications • Low saturation voltage: VCE (sat) = 0.4 V (max) • High-speed switching: tstg = 0.8 µs (typ.) Unit: mm Maximum Ratings (Tc = 25°C) Characteristics Symbol Rating Unit Collector-base voltage VCBO 60 V Collector-emitter voltage VCEO 50 V Emitter-base voltage VEBO 5 V IC 5 ICP 8 IB 1 DC Collector current Pulse Base current Ta = 25°C Collector power dissipation Tc = 25°C Junction temperature Storage temperature range A A 2.0 PC W 20 Tj 150 °C Tstg −55 to 150 °C JEDEC ― JEITA ― TOSHIBA Weight: 1.7 g (typ.) Electrical Characteristics (Tc = 25°C) Characteristics 2-10R1A Symbol Test Condition Min Typ. Max Unit Collector cut-off current ICBO VCB = 50 V, IE = 0 ― ― 1 µA Emitter cut-off current IEBO VEB = 6 V, IC = 0 ― ― 1 µA V (BR) CEO IC = 10 mA, IB = 0 50 ― ― V hFE (1) VCE = 1 V, IC = 1 A 100 ― 320 Collector-emitter breakdown voltage DC current gain hFE (2) VCE = 1 V, IC = 2.5 A 60 ― ― Collector-emitter saturation voltage VCE (sat) IC = 2.5 A, IB = 125 mA ― 0.25 0.4 V Base-emitter saturation voltage VBE (sat) IC = 2.5 A, IB = 125 mA ― 1.0 1.3 V VCB = 4 V, IC = 1 A ― 100 ― MHz VCB = 10 V, IE = 0, f = 1 MHz ― 45 ― pF ― 0.1 ― ― 0.8 ― ― 0.1 ― Switching time Storage time ton tstg 20 µs Input IB1 IB2 Output 12 Ω Turn-on time fT Cob IB2 Collector output capacitance IB1 Transition frequency µs VCC = 30 V Fall time tf IB1 = −IB2 = 125 mA, duty cycle ≤ 1% 1 2004-07-26 2SC4881 Marking C4881 Part No. (or abbreviation code) Lot No. A line indicates lead (Pb)-free package or lead (Pb)-free finish. 2 2004-07-26 2SC4881 IC – VCE IC – VBE 10 8 80 90 Common emitter 100 70 VCE = 1 V IC (A) 8 50 40 6 30 6 Collector current Collector current IC (A) 60 20 4 IB = 10 mA 2 4 Tc = 100°C 2 25 Common emitter −25 Tc = 25°C 0 0 2 4 6 Collector-emitter voltage 8 VCE 0 0 10 0.4 (V) 0.8 Base-emitter voltage hEF – IC VBE 2.0 (V) 3 Collector-emitter saturation voltage VCE (sat) (V) hFE DC current gain 1.6 VCE (sat) – IC 1000 500 1.2 Tc = 100°C 25 300 −25 100 50 30 Common emitter 10 0.03 0.05 IC/IB = 20 0.5 0.3 0.1 Tc = 100°C 0.05 25 0.03 −25 ) VCE = 1 V Common emitter 1 0.1 0.3 0.5 1 3 5 0.01 0.01 10 Collector current IC (A) 0.03 0.1 0.3 1 3 10 Collector current IC (A) Safe Operating Area VBE (sat) – IC 10 10 IC max (pulsed)* IC (A) IC/IB = 20 3 1 0.5 Collector current Base-emitter saturation voltage VBE (sat) (V) Common emitter 5 −25 Tc = 100°C 25 0.3 0.1 0.03 0.05 0.1 0.3 0.5 1 3 5 5 1 ms* 3 Collector current IC (A) 10 ms* DC operation Tc = 25°C 1 0.5 0.3 *: Single nonrepetitive pulse Tc = 25°C Curves must be derated 0.1 linearly with increase in temperature. 0.05 0.1 0.3 0.5 1 10 100 µs* IC max (continuous) VCEO max 3 5 Collector-emitter voltage 3 10 VCE 30 50 100 (V) 2004-07-26 2SC4881 RESTRICTIONS ON PRODUCT USE 030619EAA • The information contained herein is subject to change without notice. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others. • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. • TOSHIBA products should not be embedded to the downstream products which are prohibited to be produced and sold, under any law and regulations. 4 2004-07-26