TOSHIBA TCR6DA1531U

TCR6DA series
TOSHIBA CMOS Linear Integrated Circuit Silicon Monolithic
TCR6DA series
200 mA Dual Outputs CMOS Low-Dropout Regulator
SM6
The TCR6DA series are CMOS general-purpose dual-outputs
voltage regulators with independent on/off control inputs, featuring
low dropout voltage and low quiescent bias current. The TCR6DA
series can be enabled and disabled via the CONTROL pin for each
LDOs.
These voltage regulators are available in fixed output voltages
between 1.5 V and 3.3 V in 0.1-V steps and capable of driving up to
200 mA. They feature overcurrent protection.
The TCR6DA series are offered in the compact SM6 (SOT-26)
(SC-74) and small package UF6 and allow the use of small ceramic
input and output capacitors. Thus, these devices are ideal for
portable applications that require high-density board assembly such
as cellular phones.
UF6
Features
•
Low quiescent bias current
( IB(ON) = 60 μA (typ.)at IOUT (A) and IOUT (B) = 0 mA )
•
Low stand-by current ( IB(OFF) = 0.1 μA (typ.) at stand-by mode )
•
Low dropout voltage
•
High output current ( IOUT = 200 mA (max) )
Weight
SM6(SOT-26)(SC-74): 15 mg (typ.)
UF6
: 7 mg (typ.)
( VIN - VOUT = 200 mV (max.) for 3.3V output, IOUT = 50 mA )
•
High ripple rejection ( R.R. = 75 dB (typ.) at IOUT = 10 mA, f =1kHz )
•
Control voltage can be allowed from -0.3 to 6V regardless of VIN voltage
•
Overcurrent protection
•
Ceramic capacitors can be used ( CIN = 1.0μF, COUT =1.0 μF )
•
SM6(SOT-26) (SC-74) and small package UF6 (2.0 mm x 2.1 mm x 0.7 mm)
Pin Assignment (top view)
SM6(SOT-26) (SC-74)
VOUT(A)
6
1
CONTROL(A)
UF6
GND
5
2
VIN
VOUT(B)
4
3
CONTROL(B)
1
VOUT(A)
6
GND
5
1
CONTROL(A)
2
VIN
VOUT(B)
4
3
CONTROL(B)
2011-02-03
TCR6DA series
List of Products Number and Marking
Products No.
Package
VOUT(A)
VOUT(B)
Marking
*TCR6DA1525
SM6
1.5V
2.5V
AGS
TCR6DA1528
SM6
1.5V
2.8V
AGW
*TCR6DA1529
SM6
1.5V
2.9V
AGX
*TCR6DA1530
SM6
1.5V
3.0V
AGY
*TCR6DA1531
SM6
1.5V
3.1V
AG1
*TCR6DA1533
SM6
1.5V
3.3V
AG3
*TCR6DA1825
SM6
1.8V
2.5V
AKS
TCR6DA1828
SM6
1.8V
2.8V
AKW
*TCR6DA1829
SM6
1.8V
2.9V
AKX
TCR6DA1830
SM6
1.8V
3.0V
AKY
*TCR6DA1831
SM6
1.8V
3.1V
AK1
*TCR6DA1833
SM6
1.8V
3.3V
AK3
*TCR6DA1525U
UF6
2.5V
1.5V
ASG
TCR6DA1528U
UF6
2.8V
1.5V
AWG
*TCR6DA1529U
UF6
2.9V
1.5V
AXG
*TCR6DA1530U
UF6
3.0V
1.5V
AYG
*TCR6DA1531U
UF6
3.1V
1.5V
A1G
*TCR6DA1533U
UF6
3.3V
1.5V
A3G
*TCR6DA1825U
UF6
2.5V
1.8V
ASK
TCR6DA1828U
UF6
2.8V
1.8V
AWK
*TCR6DA1829U
UF6
2.9V
1.8V
AXK
*TCR6DA1830U
UF6
3.0V
1.8V
AYK
*TCR6DA1831U
UF6
3.1V
1.8V
A1K
*TCR6DA1833U
UF6
3.3V
1.8V
A3K
TCR6DA2530U
UF6
3.0V
2.5V
AYS
*If you need another voltage ranks, please contact to our sales
Marking
Example:TCR6DA1828 (1.8V, 2.8V output)
Example:TCR6DA1828U (2.8V, 1.8V output)
AKW
AWK
2
2011-02-03
TCR6DA series
Absolute Maximum Ratings(Ta = 25°C)
Characteristics
Symbol
Rating
Unit
Input voltage
VIN
6
V
Control voltage
VCT
-0.3 to 6
V
Output voltage
VOUT
-0.3 to VIN + 0.3
V
Output current
IOUT
200
mA
SM6
480
(Note1)
mW
UF6
500
(Note1)
mW
Power dissipation
PD
Operation temperature range
Topr
−40 to 85
°C
Tj
150
°C
Tstg
−55 to 150
°C
Junction temperature
Storage temperature range
Note:
Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly
even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute
maximum ratings and the operating ranges.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 1 : Rating at mounting on a board
(25.4mm x 25.4mm x 1.6mm, copper pad:645mm2)
3
2011-02-03
TCR6DA series
Electrical Characteristics
(Unless otherwise specified,
VIN = VOUT + 1 V, IOUT = 50 mA, CIN = 1.0 μF, COUT = 1.0 μF, Tj = 25°C)
For 1.5 and 1.8V output
Characteristics
Symbol
Output voltage
VOUT
Line regulation
Reg･line
Load regulation
Quiescent current
Dropout voltage
Temperature coefficient
Test Condition
Min.
Typ.
Max.
Unit
15
mV
Please refer to the Output Voltage Accuracy table
VOUT + 0.5 V ≤ VIN ≤ 6 V,
IOUT = 1 mA
⎯
1
Reg･load 1 mA ≤ IOUT ≤ 100 mA
⎯
15
30
mV
IOUT = 0 mA
⎯
30
75
μA
ppm/°C
IB
VIN-VOUT
TCVO
Input voltage
VIN
Ripple rejection ratio
R.R.
Please refer to the Dropout voltage table
−40°C ≤ Topr ≤ 85°C
⎯
⎯
100
⎯
VOUT = 1.5V
2.0
⎯
6.0
VOUT = 1.8V
2.15
⎯
6.0
⎯
75
⎯
dB
Min.
Typ.
Max.
Unit
15
mV
VIN = VOUT + 1 V, IOUT = 10 mA,
f = 1 kHz, VRipple = 500 mVp-p,
Ta = 25°C
V
For 2.5 to 3.3V output
Characteristics
Symbol
Output voltage
VOUT
Line regulation
Reg･line
Load regulation
Quiescent current
Dropout voltage
Temperature coefficient
Test Condition
Please refer to the Output Voltage Accuracy table
VOUT + 0.5 V ≤ VIN ≤ 6 V,
IOUT = 1 mA
⎯
1
Reg･load 1 mA ≤ IOUT ≤ 100 mA
⎯
15
30
mV
IOUT = 0 mA
⎯
30
75
μA
IB
VIN-VOUT
TCVO
Input voltage
VIN
Ripple rejection ratio
R.R.
Please refer to the Dropout voltage table
−40°C ≤ Topr ≤ 85°C
⎯
VIN = VOUT + 1 V, IOUT = 10 mA,
f = 1 kHz, VRipple = 500 mVp-p,
Ta = 25°C
⎯
100
⎯
ppm/°C
VOUT(A)
+0.2V
⎯
6.0
V
⎯
75
⎯
dB
Min.
Typ.
Max.
Unit
Common Characteristics
Characteristics
Symbol
Test Condition
Quiescent current
IB(ON)
IOUT (A)= 0 mA, IOUT (B)= 0 mA
⎯
60
150
μA
Quiescent current
IB(OFF)
IOUT = 0 mA
⎯
0.1
1
μA
Control voltage (ON)
VCT (ON)
⎯
1.1
⎯
6.0
V
Control voltage (OFF)
VCT (OFF)
⎯
0
⎯
0.3
V
⎯
⎯
0.1
μA
⎯
⎯
0.1
μA
VCT = 6.0 V
Control current (ON)
ICT (ON)
Control current (OFF)
ICT (OFF) VCT = 0 V
4
2011-02-03
TCR6DA series
Output Voltage Accuracy
(VIN = VOUT + 1 V, IOUT = 50 mA, CIN = 1.0 μF, COUT = 1.0 μF, Tj = 25°C)
Symbol
VOUT
Min.
Typ.
Max.
1.47
1.5
1.53
1.76
1.8
1.84
2.45
2.5
2.55
2.74
2.8
2.86
2.84
2.9
2.96
2.94
3.0
3.06
3.03
3.1
3.17
3.23
3.3
3.37
Unit
V
・Dropout Voltage
(IOUT
= 50 mA, CIN = 1.0 μF, COUT = 1.0 μF, Tj = 25°C)
Symbol
VIN-VOUT
Output Voltage
Min.
Typ.
Max.
1.5 V
⎯
300
500
1.8 V
⎯
200
350
2.5 to 3.3 V
⎯
90
200
5
Unit
mV
2011-02-03
TCR6DA series
Application Note
1. Recommended Application Circuit
VOUT(B)
GND
6
4
5
2
3
CONTROL Voltage
Output Voltage
CONTROL(A)
CONTROL(B)
VOUT(A)
VOUT(B)
High
High
ON
ON
High
Low
ON
OFF
Low
High
OFF
ON
Low
Low
OFF
OFF
1.0 μF
1
1.0 μF
1.0 μF
VOUT(A)
CONTROL(A)
VIN
CONTROL(B)
The figure above shows the recommended configuration for using a Low-Dropout regulator. Insert a capacitor
to VOUT and VIN for stable input/output operation. (ceramic capacitors can be used)
If the control function is not used, Toshiba recommend that the control pin is connected to the VIN pin.
2. Power Dissipation
Power dissipation is measured on the board condition shown below.
[The Board Condition]
Board material : Glass epoxy
Board dimension : 25.4mm x 25.4mm, t = 1.6mm
2
Pad dimension : 645mm
PD - Ta (SM6)
Power Dissipation PD (mW)
600
400
200
0
-40
0
40
80
120
Ambient Temperature Ta (℃)
PD - Ta (UF6)
Power Dissipation PD (mW)
600
400
200
0
-40
0
40
80
Ambient Temperature Ta (℃)
6
120
2011-02-03
TCR6DA series
Attention in Use
●
Output Capacitors
Ceramic capacitors can be used for these devices. However, because of the type of the capacitors, there might be
unexpected thermal features. Please consider application condition for selecting capacitors. And Toshiba
recommend the ESR of ceramic capacitor is under 10 Ω.
●
Mounting
The long distance between IC and output capacitor might affect phase assurance by impedance in wire and inductor.
For stable power supply, output capacitor need to mount near IC as much as possible. Also GND pattern need to
be large and make the wire impedance small as possible.
●
Permissible Loss
Please have enough board design patterns for expected maximum permissible loss. And under consideration of
surrounding temperature, input voltage, and output current etc, please apply proper dissipation ratings for maximum
permissible loss.
●
Overcurrent Protection Circuit
Overcurrent protection circuit is designed in these products, but this does not assure for the suppression of uprising
device operation. If output pins and GND pins are shorted out, these products might be break down.
In use of these products, please read through and understand dissipation idea for absolute maximum ratings from
the above mention or our ‘Semiconductor Reliability Handbook’. Then use these products under absolute
maximum ratings in any condition. Furthermore, Toshiba recommend inserting failsafe system into the design.
7
2011-02-03
TCR6DA series
Representative Typical Characteristics
1) Output Voltage vs. Input Voltage
Vout=1.8V
Vout=1.5V
(V)
CIN = 1 μF, COUT = 1 μF
IOUT = 1 mA
VOUT
1.5
3
1.0
Output voltage
Output voltage
VOUT
(V)
2.0
50 mA
0.5
0
0
1
2
3
Input voltage
4
VIN
5
CIN = 1 μF, COUT = 1 μF
2.5
2
IOUT = 1 mA
1.5
1
50 mA
0.5
0
0
6
1
2
3
Input voltage
(V)
4
VIN
5
6
(V)
Vout=2.5V
Output voltage
VOUT
(V)
6
CIN = 1 μF, COUT = 1 μF
5
4
3
2
IOUT = 1 mA
50 mA
1
0
0
1
2
3
Input voltage
4
VIN
5
6
(V)
2) Output Voltage vs. Output Current
Vout=1.8V
Vout=1.5V
1.9
VIN = 2.8V,
CIN = 1 μF, COUT = 1 μF
CIN = 1 μF, COUT = 1 μF
(V)
VIN = 2.5 V,
1.5
1.4
0
Output voltage
Output voltage
VOUT
VOUT
(V)
1.6
20
40
60
80
1.7
0
100 120 140 160 180 200
Output current
IOUT
1.8
20
40
60
80
100 120 140 160 180 200
Output current
(mA)
8
IOUT
(mA)
2011-02-03
TCR6DA series
Vout=2.5V
2.6
VIN = 3.5 V,
Output voltage
VOUT
(V)
CIN = 1 μF, COUT = 1 μF
2.5
2.4
0
20
40
60
80
100 120 140 160 180 200
Output current
IOUT
(mA)
3) Output Voltage vs. Ambient temperature
Vout=1.5V
Vout=1.8V
1.52
1.82
(V)
VIN = 2.8 V,
CIN = 1 μF, COUT = 1 μF
VOUT
1.51
Output voltage
Output voltage VOUT
(V)
VIN = 2.5 V,
1.5
IOUT = 50 mA
1.49
1.48
−50
−25
0
25
50
Ambient temperature
Ta
75
1.8
(°C)
IOUT = 50 mA
1.79
1.78
−50
100
CIN = 1 μF, COUT = 1 μF
1.81
−25
0
25
Ambient temperature
50
Ta
75
100
(°C)
Vout=2.5V
2.52
Output voltage
VOUT
(V)
VIN = 3.5V,
CIN = 1 μF, COUT = 1 μF
2.51
2.5
IOUT = 50 mA
2.49
2.48
−50
−25
0
25
Ambient temperature
50
Ta
75
100
(°C)
9
2011-02-03
TCR6DA series
4) Dropout Voltage vs. Output Current
Vout=2.5V
Dropout voltage
VIN - VOUT (mV)
500
CIN = 1 μF, COUT = 1 μF,
400
25°C
300
200
100
0
0
20
40
60
80
100 120 140 160 180
Output current
IOUT
200
(mA)
5) Quiescent Current vs. Input Voltage
Vout=1.5V
Vout=2.5V
60
60
(μA)
CIN = 1 μF, COUT = 1 μF
Quiescent current IB
Quiescent current
IB
(μA)
CIN = 1 μF, COUT = 1 μF
50
40
IOUT = 0 mA
30
20
10
0
0
50
40
IOUT = 0 mA
30
20
10
1
2
3
Input voltage
5
4
VIN
0
6
(V)
0
1
2
3
Input voltage
10
4
VIN
5
6
(V)
2011-02-03
TCR6DA series
6) Quiescent current vs. Ambient temperature
Vout=1.5V
Vout=1.8V
100
100
COUT = 1μF,
COUT = 1μF,
Quiescent current
IB
IB
Quiescent current
VIN = 2.8 V, CIN = 1 μF,
(μA)
(μA)
VIN = 2.5 V, CIN = 1 μF,
IOUT = 150 mA
50
50 mA
0 mA
0
−50
−25
0
25
50
75
IOUT = 150 mA
50
50 mA
0 mA
0
−50
100
Ambient temperature Ta (°C)
−25
0
25
50
75
100
Ambient temperature Ta (°C)
Vout=2.5V
100
(μA)
VIN = 3.5 V, CIN = 1 μF,
Quiescent current
IB
COUT = 1μF,
IOUT = 150 mA
50
50 mA
0 mA
0
−50
−25
0
25
50
75
100
Ambient temperature Ta (°C)
7) Overcurrent Protection Characteristics
Vout=1.5V
Vout=1.8V
2.5
2.5
(V)
Pulse width = 50 ms
VOUT
2.0
VIN = 6.0 V
1.5
Output voltage
Output voltage
VOUT
(V)
Pulse width = 50 ms
VIN = 2.5 V
1.0
0.5
0
0
100
200
300
Output current
400
IOUT
500
1.5
(mA)
VIN = 2.8 V
1.0
0.5
0
0
600
VIN = 6.0 V
2.0
100
200
300
Output current
11
500
400
IOUT
600
(mA)
2011-02-03
TCR6DA series
Vout=2.5V
5.0
Output voltage
VOUT
(V)
Pulse width = 50 ms
4.0
3.0
2.0
VIN = 6.0 V
1.0
VIN = 3.5 V
0
0
100
200
300
Output current
IOUT
500
600
(mA)
Ripple rejection Raito vs. Frequency
Vout=2.5V
90
(dB)
80
Ripple Rejection Raito
8)
400
70
60
50
40
30
20
VIN = 4.0 V ,Vripple = 500 mVp−p
10
CIN = none, COUT = 1μF
IOUT = 10 mA, Ta = 25°C
0
10
100
1k
Frequency f
10 k
100 k 300 k
(Hz)
12
2011-02-03
TCR6DA series
9) Control Transient Response
Vout=2.5V (Turn off wave form)
VIN = 4.0 V,
CIN = 1 μF, COUT = 1 μF
IOUT = 50 mA
Output voltage
Δ VOUT (1V/div)
Output voltage
Δ VOUT (1V/div)
Control voltage
VCT (ON) (1V/div)
Control voltage
VCT (OFF) (1V/div)
Vout=2.5V (Turn on wave form)
VIN = 4.0 V,
CIN = 1 μF, COUT = 1 μF
IOUT = 50 mA
Time t ( 100 μs/div )
Time t ( 100 μs/div )
10) Load Transient Response
Vout=1.5V
(IOUT = 30m to 1mA)
Output voltage
Δ VOUT (50mV/div)
VIN = 3.8 V,
CIN = 1 μF, COUT = 1 μF
CIN = 1 μF, COUT = 1 μF
Time t ( 20 μs/div )
Vout=1.5V
(IOUT = 50m to 100mA)
Vout=1.5V
(IOUT = 100m to 50mA)
Output current
IOUT (50mA/div)
Output voltage
Δ VOUT (50mV/div)
Output voltage
Δ VOUT (50mV/div)
VIN = 3.8 V,
Time t ( 10 μs/div )
Output current
IOUT (50mA/div)
Output voltage
Δ VOUT (50mV/div)
Output current
IOUT (20mA/div)
Output current
IOUT (20mA/div)
Vout=1.5V
(IOUT = 1m to 30mA)
VIN = 3.8 V,
CIN = 1 μF, COUT = 1 μF
Time t ( 10 μs/div )
VIN = 3.8 V,
CIN = 1 μF, COUT = 1 μF
Time t ( 20 μs/div )
13
2011-02-03
TCR6DA series
Vout=2.5V
(IOUT = 1m to 30mA)
Output voltage
Δ VOUT (50mV/div)
Output voltage
Δ VOUT (50mV/div)
Output current
IOUT (20mA/div)
Output current
IOUT (20mA/div)
Vout=2.5V
(IOUT =30m to 1mA)
VIN = 3.5 V,
CIN = 1 μF, COUT = 1 μF
Time t ( 10 μs/div )
CIN = 1 μF, COUT = 1 μF
Time t ( 20 μs/div )
Vout=2.5V
(IOUT = 50m to 100mA)
Vout=2.5V
(IOUT = 100m to 50mA)
Output voltage
Δ VOUT (50mV/div)
Output current
IOUT (50mA/div)
Output current
IOUT (50mA/div)
Output voltage
Δ VOUT (50mV/div)
VIN = 3.5 V,
VIN = 3.5 V,
CIN = 1 μF, COUT = 1 μF
Time t ( 10 μs/div )
VIN = 4 V,
CIN = 1 μF, COUT = 1 μF
Time t ( 20 μs/div )
14
2011-02-03
TCR6DA series
Package Dimensions
UF6
Unit : mm
Weight: 7 mg (typ.)
15
2011-02-03
TCR6DA series
Package Dimensions
SM6(SOT-26)(SC-74)
Unit : mm
Weight: 15 mg (typ.)
16
2011-02-03
TCR6DA series
RESTRICTIONS ON PRODUCT USE
• Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively “Product”) without notice.
• This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.
• Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the
Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of
all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes
for Product and the precautions and conditions set forth in the “TOSHIBA Semiconductor Reliability Handbook” and (b) the
instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their
own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such
design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,
diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating
parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR
APPLICATIONS.
• Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious
public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used
in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this
document.
• Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
• Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
• The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
• ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
• Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product
or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
• Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.
17
2011-02-03