B40C1000G THRU B380C1000G GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER Reverse Voltage - 65 to 600 Volts Forward Current -1.0 Ampere FEATURES Case Style WOG 0.388 (9.86) 0.348 (8.84) ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ Glass passivated chip junctions ♦ High case dielectric strength ♦ Typical IR less than 0.1 µ A ♦ High overload surge current ♦ Ideal for printed circuit boards ♦ High temperature soldering guaranteed: 260°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension 0.220 (5.6) 0.160 (4.1) 1.0 (25.4) MIN. 0.032 (0.81) 0.060 (1.52) 0.028 (0.71) 0.020 (0.51) 0.220 (5.6) 0.348 (8.84) MECHANICAL DATA 0.180 (4.6) 0.308 (7.82) Case: Molded plastic body over passivated junctions Terminals: Plated leads solderable per MIL-STD-750, Method 2026 Mounting Position: Any Weight: 0.04 ounce, 1.1 grams 0.220 (5.6) 0.180 (4.6) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS B40 C1000G B80 C1000G B125 C1000G B250 C1000G B380 C1000G UNITS Maximum repetitive peak reverse voltage VRRM 65 125 200 400 600 Volts Maximum RMS input voltage R + C-load VRMS 40 80 125 250 380 Volts Maximum DC blocking voltage VDC 65 125 200 400 600 Volts Maximum peak working voltage VRWM 90 180 300 600 900 Volts Maximum non-repetitive peak voltage VRSM 100 200 350 600 1000 Volts Maximum repetitive peak forward surge current IFRM 10.0 Amps Maximum average forward output current for free air operation at TA=45°C R + L-Load C-Load I(AV) 1.2 1.0 Amps Peak forward surge current single sine wave on rated load (JEDEC Method) IFSM 45.0 Amps I2t 10.0 A2sec Rating for fusing at TJ=125°C (t<8.3ms) Minimum series resistor C-load at VRMS = ±10% RT 1.0 2.0 4.0 8.0 12.0 Ohms Maximum load capacitance +50% -10% CL 5000 2500 1000 500 200 µF Maximum instantaneous forward voltage drop per leg at 1.0A VF 1.0 Volts Maximum reverse current at rated repetitive peak voltage per leg IR 10.0 µA RΘJA RΘJL 36.0 11.0 °C/W TJ -40 to +125 °C TSTG -40 to +150 °C Typical thermal resistance (NOTE 1) Operating junction temperature range Storage temperature range TA=25°C NOTE: (1) Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B. at 0.375" (9.5mm) lead lengths with 0.2 x 0.2" (5.5 x 5.5mm) copper pads 4/98 RATINGS AND CHARACTERISTICS CURVES B40C1000G THRU B380C1000G BRIDGE OUTPUT FULL WAVE RECTIFIED CURRENT AVERAGE, AMPERES 1.2 AVERAGE FORWARD OUTPUT CURRENT, AMPERES FIG.1 - DERATING CURVE OUTPUT RECTIFIED CURRENT B40C1000G...B125C1000G 50 to 60Hz RESISTIVE OR INDUCTIVE LOAD 1.0 CAPACITIVE 0.8 LOAD 0-10µF 10-100µF >100µF 0.6 0.4 P.C.B. 0.375” (9.5mm) 0.2 0 20 COPPER PADS 0.22 x 0.22” (5.5 x 5.5mm) 40 60 80 100 120 140 AMBIENT TEMPERATURE, °C 40 30 20 10 4 6 10 20 0.8 CAPACITIVE 0-10µF 10-100µF >100µF LOAD 0.6 0.4 0.375” P.C.B. (9.5mm) 0.2 0 20 COPPER PADS 0.22 x 0.22” (5.5 x 5.5mm) 40 60 80 100 120 140 40 60 100 NUMBERS OF CYCLES AT 50 HZ 20 INSTANTANEOUS FORWARD CURRENT, AMPERES INSTANTANEOUS REVERSE CURRENT, MICROAMPERES TJ=125°C 10mS SINGLE SINE-WAVE 2 50 to 60Hz RESISTIVE OR INDUCTIVE LOAD 1.0 FIG. 4 - TYPICAL FORWARD CHARACTERISTICS PER LEG 50 1 1.2 AMBIENT TEMPERATURE, °C FIG. 3 - MAXIMUM NON-REPETITIVE PEAK FORWARD CURRENT PER LEG 0 FIG. 2 - DERATING CURVES FOR OUTPUT RECTIFIED CURRENT B250C1000G...B380C1000G 10 TJ=25°C PULSE WIDTH=300µs 1% DUTY CYCLE 1 0.1 0.01 0.4 0.6 0.8 1.0 1.2 1.4 INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG. 5 - TYPICAL REVERSE CHARACTERISTICS PER LEG FIG. 6 - TYPICAL JUNCTION CAPACITANCE PER LEG 100 JUNCTION CAPACITANCE, pF INSTANTANEOUS REVERSE CURRENT, MICROAMPERES 10 TJ=100°C 1 0.1 TJ=25°C 0.01 0 20 40 60 80 PERCENT OF RATED PEAK REVERSE VOLTAGE, % 100 TJ=25°C f=1.0 MHz Vsig=50MVp-p 10 1 0.1 1 10 REVERSE VOLTAGE, VOLTS 100