MOS FET Relays G3VM-353H Analog-switching MOS FET Relay with SPST-NC (Single-pole, Single-throw, Normally Closed) Contacts • New models in 350-V load voltage series with SPST-NC contacts and a 6-pin SOP package. • Continuous load current of 120 mA. • Dielectric strength of 1,500 Vrms between I/O. ■ Application Examples Note: The actual product is marked differently from the image shown here. • Broadband systems • Measurement devices • Data loggers • Amusement machines ■ List of Models Contact form SPST-NC Terminals Surface-mounting terminals Load voltage (peak value) 350 VAC Model Number per stick 75 --- G3VM-353H(TR) --- 2,500 ■ Dimensions Note: All units are in millimeters unless otherwise indicated. G3VM-353H 4.4±0.25 6.3±0.25 2.1 max. 0.15 Note: The actual product is marked differently from the image shown here. 2.54±0.25 0.6±0.3 0.1±0.1 0.4±0.1 7.0±0.4 Weight: 0.13 g ■ Terminal Arrangement/Internal Connections (Top View) G3VM-353H 6 5 4 1 2 3 ■ Actual Mounting Pad Dimensions (Recommended Value, Top View) G3VM-353H 6 to 6.3 1.2 0.8 2.54 80 2.54 Number per tape G3VM-353H G3VM-353H G3VM-353H ■ Absolute Maximum Ratings (Ta = 25°C) Item Input Output Symbol Rating Unit Measurement Conditions Note: LED forward current IF 50 mA Repetitive peak LED forward current IFP 1 A 100 ms pulses, 100 pps LED forward current reduction rate D IF/°C -0.5 mA/°C Ta ³ 25°C LED reverse voltage VR 5 V Connection temperature Tj 125 °C Output dielectric strength VOFF 350 V Continuous load current IO 120 mA Connection A Connection B Connection Diagram Connection A 1 6 2 5 3 4 1 6 2 5 3 4 1 6 2 5 3 4 Load AC or DC 120 Connection C ON current reduction rate 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. 240 D ION/°C Connection A -1.2 Ta ³ 25°C mA/°C Connection B -1.2 Connection B Load DC -2.4 Connection C Tj 125 °C Dielectric strength between input and output (See note 1.) VI-O 1,500 Vrms Operating temperature Ta Storage temperature Soldering temperature (10 s) Connection temperature AC for 1 min -40 to +85 °C With no icing or condensation Tstg -55 to +125 °C With no icing or condensation --- 260 °C 10 s Connection C Load DC ■ Electrical Characteristics (Ta = 25°C) Item Input Output Symbol Minimum Typical Maximum Unit Measurement conditions Note: LED forward voltage VF 1.0 1.15 1.3 V IF = 10 mA Reverse current IR --- --- 10 mA VR = 5 V Capacity between terminals CT --- 30 --- pF V = 0, f = 1 MHz Trigger LED forward current IFT --- 1.0 3.0 mA IOFF = 10 mA Maximum resistance with output ON RON --- 15 25 W IO = 120 mA Connection B --- 8 14 W IO = 120 mA Connection C --- 4 --- W IO = 240 mA ILEAK --- --- 1.0 mA VOFF = 350 V, IF = 5 mA CI-O --- 0.8 --- pF f = 1 MHz, Vs = 0 V Connection A Current leakage when the relay is open Capacity between I/O terminals 2. Turn-ON and Turn-OFF Times IF 1 6 2 4 RL VDD VOUT IF Insulation resistance RI-O 1,000 --- --- MW VI-O = 500 VDC, RoH £ 60% Turn-ON time tON --- --- 1.0 ms Turn-OFF time tOFF --- --- 3.0 ms IF = 5 mA, RL = 200 W, VDD = 20 V (See note 2.) VOUT 10% t ON 90% t OFF ■ Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Symbol Minimum Typical Output dielectric strength VDD --- --- Operating LED forward current IF 5 Continuous load current IO --- Operating temperature Ta - 20 --- Maximum Unit 280 V --- 25 mA --- 120 mA 65 °C ■ Engineering Data ■ Safety Precautions Load Current vs. Ambient Temperature Refer to page 6 for precautions common to all G3VM models. Load current (mA) G3VM-353H 300 250 Connection C 200 150 Connection A or connection B 100 50 0 −20 0 20 40 60 80 100 Ambient temperature (°C) 81