VBUS053AZ-HAF Vishay Semiconductors USB-OTG BUS-Port ESD-Protection for VBUS = 12 V FEATURES • Ultra compact LLP75-7L package 6 5 • Low package height < 0.6 mm 4 • 3-line USB ESD-protection with max. working range = 5.5 V • VBUS - protection with 12 V working range 7 1 2 3 • Low leakage current 21102 • Low load capacitance CD = 0.7 pF 20517 • ESD-protection to IEC 61000-4-2 ± 15 kV contact discharge ± 15 kV air discharge 1 MARKING (example only) XX YY • Surge current acc. IEC 61000-4-5 IPP > 3 A • e4 - precious metal (e.g. Ag, Au, NiPd, NiPdAu) (no Sn) • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC 21001 Dot = Pin 1 marking XX = Date code YY = Type code (see table below) ORDERING INFORMATION DEVICE NAME VBUS053AZ-HAF ORDERING CODE TAPED UNITS PER REEL (8 mm TAPE ON 7" REEL) MINIMUM ORDER QUANTITY VBUS053AZ-HAF-GS08 15 000 15 000 PACKAGE DATA DEVICE NAME VBUS053AZ-HAF PACKAGE NAME TYPE CODE WEIGHT MOLDING COMPOUND FLAMMABILITY RATING MOISTURE SENSITIVITY LEVEL SOLDERING CONDITIONS LLP75-7L U9 4.2 mg UL 94 V-0 MSL level 1 (according J-STD-020) 260 °C/10 s at terminals ABSOLUTE MAXIMUM RATINGS PARAMETER TEST CONDITIONS SYMBOL VALUE UNIT Data line D+, D-, ID: Pin 1, 2 and 3 to ground (pin 7) Peak pulse current acc. IEC 61000-4-5; tp = 8/20 µs; single shot IPPM 3 A Peak pulse power acc. IEC 61000-4-5; tp = 8/20 µs; single shot PPP 36 W Contact discharge acc. IEC 61000-4-2; 10 pulses VESD ± 15 kV Air discharge acc. IEC 61000-4-2; 10 pulses VESD ± 15 kV Peak pulse current acc. IEC 61000-4-5; tp = 8/20 µs/single shot IPPM 8 A Peak pulse power acc. IEC 61000-4-5; tp = 8/20 µs/single shot PPP 240 W Contact discharge acc. IEC 61000-4-2; 10 pulses VESD ± 30 kV Air discharge acc. IEC 61000-4-2; 10 pulses VESD ± 30 kV Junction temperature TJ - 40 to + 125 °C TSTG - 55 to + 150 °C ESD immunity VBUS: Pin 6 to ground (pin 7) ESD immunity Operating temperature Storage temperature ** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902 Document Number: 81845 Rev. 1.4, 16-Dec-10 For technical questions, contact: [email protected] www.vishay.com 1 VBUS053AZ-HAF Vishay Semiconductors USB-OTG BUS-Port ESD-Protection for VBUS = 12 V ELECTRICAL CHARACTERISTICS All inputs (pin 1, 2, and 3) to ground (pin 7) PARAMETER Protection paths Reverse working voltage Reverse current TEST CONDITIONS/REMARKS SYMBOL MIN. TYP. MAX. UNIT Number of lines which can be protected Nchannel - - 3 lines at IR = 0.1 µA VRWM 5.5 - - V at VR = VRWM = 3.3 V; T = 65 °C IR - - 0.085 µA at VR = VRWM = 5.5 V IR - - 1 µA Forward voltage at IF = 15 mA VF 0.7 - 1.2 V Reverse breakdown voltage at IR = 1 mA VBR 6.5 - 10 V at IPP = 1 A; acc. IEC 61000-4-5; T = 25 °C VC - 10 12 V at IPP = 3 A; acc. IEC 61000-4-5; T = 25 °C VC - 15 18 V at IF = 3 A; acc. IEC 61000-4-5 VF - 3.4 4.1 V Test pin at VR = 0 V; any other I/O pin at VR = 3.3 V, f = 1 MHz CD - 0.7 1 pF Difference of the line capacitance dCD - - 0.1 pF Among pins 1, 2 and 3 at VR = 0 V; f = 1 MHz CDD - 0.35 0.5 pF Reverse clamping voltage Forward clamping voltage Line capacitance Line symmetry Line to line capacitance Note • Tamb = - 40 °C to 85 °C, unless otherwise specified ELECTRICAL CHARACTERISTICS VBUS (pin 6) to ground (pin 7) PARAMETER TEST CONDITIONS/REMARKS SYMBOL MIN. TYP. MAX. UNIT Number of line which can be protected Nchannel - - 1 line at IR = 100 nA VRWM 12 - - V Reverse current at VR = VRWM = 12 V IR - - 100 nA Forward voltage at IF = 10 mA VF 0.6 0.75 0.9 V Reverse breakdown voltage at IR = 1 mA VBR 15 - 18 V at IPP = 1 A; acc. IEC 61000-4-5; T = 25 °C VC - 17.5 20 V at IPP = 8 A; acc. IEC 61000-4-5; T = 25 °C VC - 25 30 V at IF = 8 A; acc. IEC 61000-4-5 VF - - 2.2 V at VR = 0 V, f = 1 MHz CD - 70 85 pF Protection paths Reverse working voltage Reverse clamping voltage Forward clamping voltage Line capacitance Note • Tamb = - 40 °C to 85 °C, unless otherwise specified www.vishay.com 2 For technical questions, contact: [email protected] Document Number: 81845 Rev. 1.4, 16-Dec-10 VBUS053AZ-HAF USB-OTG BUS-Port ESD-Protection Vishay Semiconductors for VBUS = 12 V APPLICATION NOTE The VBUS053AZ-HAF is intended as an ESD-protection and transient voltage suppressor for one USB-OTG port. The LLP75-7L package contains two separate dies which are mounted on a common ground plane (pin 7). The high-speed data lines D-, D+ and ID, are connected to any of the pins no. 1 to 3. As long as the signal voltage on the data lines is between the ground- and the 5 V working range, the low capacitance PN-diodes offer a very high isolation to ground and to the other data lines. But as soon as any transient signal like an ESD-signal, exceeds this working range of 5 V in either the positive or negative direction, one of the PN-diodes gets into the forward mode and clamps the transient either to ground or to the avalanche break through level. An extra avalanche diode (separate die) clamps the supply line voltage (VBUS at pin 6) above the 12 V working range to ground (pin 7). Due to the “two die construction” the VBUS line has a very high isolation to the data lines. In case of a destructive transient signal, i.e. coming from a charger, the data lines will not be influenced. (pinning top view) VBUS 6 5 4 nc. nc. 6 5 4 2 3 7 GND 7 1 D- 2 D+ 3 ID 1 21103 Remark: The input pins no. 1, 2 and 3 are symmetrical. Each of the data signals D-, D+ and ID can be connected to pin 1, 2 or 3. TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 120 % 80 f = 1 MHz Rise time = 0.7 ns to 1 ns 100 % Discharge Current IESD Pin 6 to pin 7 70 60 CD (pF) 80 % 60 % 53 % 50 40 30 40 % 20 27 % 20 % 10 0% - 10 0 10 20 30 40 50 60 70 80 90 100 0 5 21468 Time (ns) 20557 0 Fig. 1 - ESD Discharge Current Wave Form acc. IEC 61000-4-2 (330 Ω/150 pF) 10 15 VR (V) Fig. 3 - Typical Capacitance CD vs. Reverse Voltage VR 0.8 f = 1 MHz, one I/O pin at 3.3 V 8 µs to 100 % 100 % 0.7 0.6 CD (pF) IPPM 80 % 60 % 20 µs to 50 % 40 % 0.5 0.4 0.3 Pin 1, 2 or 3 to pin 7 0.2 20 % 0.1 0% 0 0 20548 10 20 30 Time (µs) Fig. 2 - 8/20 µs Peak Pulse Current Wave Formacc. IEC 61000-4-5 Document Number: 81845 Rev. 1.4, 16-Dec-10 0 40 0.5 21469 1 1.5 2 2.5 3 3.5 VR (V) Fig. 4 - Typical Capacitance CD vs. Reverse Voltage VR For technical questions, contact: [email protected] www.vishay.com 3 VBUS053AZ-HAF Vishay Semiconductors USB-OTG BUS-Port ESD-Protection for VBUS = 12 V 100 30 Measured acc. IEC 61000-4-5 (8/20 µs - wave form) 25 10 P in 6 to p in 7 Pin 6 to pin 7 20 VC (V) IF (mA) 1 Pin 1, 2 or 3 to pin 7 0.1 VC 15 10 0.01 5 P in 7 to p in 6 0.001 0.5 0 0.6 0.7 0.8 0.9 1 VF (V) 21470 0 1.1 1 2 21473 Fig. 5 - Typical Forward Current IF vs. Forward Voltage VF 3 4 5 6 7 8 9 10 11 IPP (A) Fig. 8 - Typical Peak Clamping Voltage VC vs. Peak Pulse Current IPP 20 18 Pin 6 to pin 7 16 VR (V) 14 12 10 8 Pin 1, 2 or 3 to pin 7 6 4 2 0 0.01 0.1 1 10 100 1000 10 000 IR (µA) 21471 Fig. 6 - Typical Reverse Voltage VR vs. Reverse Current IR 18 Measured acc. IEC 61000-4-5 (8/20 µs - wave form) 16 14 P in 1 , 2 o r 3 to p in 7 VC (V) 12 10 VF 8 6 4 P in 7 to p in 1 , 2 o r 3 2 0 0 21472 1 2 3 4 IPP (A) Fig. 7 - Typical Peak Clamping Voltage VC vs. Peak Pulse Current IPP www.vishay.com 4 For technical questions, contact: [email protected] Document Number: 81845 Rev. 1.4, 16-Dec-10 VBUS053AZ-HAF USB-OTG BUS-Port ESD-Protection Vishay Semiconductors for VBUS = 12 V 0.45 (0.018) 0.55 (0.022) 0.2 (0.008) 0.3 (0.012) 0.2 (0.008) 0.3 (0.012) 1 (0.039) 0.2 (0.008) 0.3 (0.012) Heat sink 0.95 (0.037) 1.05 (0.041) PACKAGE DIMENSIONS in millimeters (inches): LLP75-7L 0.5 (0.020) 0.6 (0.024) 0.6 (0.024) 0.54 (0.021) 1.65 (0.065) 1.55 (0.061) 0.05 (0.002) 0 (0.000) 0.15 (0.006) 0.25 (0.010) 1.65 (0.065) Pin 1 marking 1.55 (0.061) Foot print recommendation: 0.5 (0.020) 0.5 (0.020) 0.3 (0.012) 0.3 (0.012) Document no.:S8-V-3906.02-014 (4) Created - Date: 04. April 2006 0.15 (0.006) 1 (0.039) 0.5 (0.020) 1 (0.039) 0.25 (0.010) 0.15 (0.006) Solder resist mask Solder pad 0.5 (0.020) 20500 Document Number: 81845 Rev. 1.4, 16-Dec-10 For technical questions, contact: [email protected] www.vishay.com 5 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1