1N4150W-V Vishay Semiconductors Small Signal Switching Diode Features • Silicon Epitaxial Planar Diode • For general purpose and switching • This diode is also available in other case styles including the DO-35 case with the type designation 1N4150, and the MiniMELF case with the type designation LL4150. • AEC-Q101 qualified • Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC 17431 Mechanical Data Case: SOD-123 Weight: approx. 9.3 mg Packaging codes/options: GS18 / 10 k per 13" reel (8 mm tape), 10 k/box GS08 / 3 k per 7" reel (8 mm tape), 15 k/box Parts Table Part 1N4150W-V Ordering code Marking Remarks 1N4150W-V-GS18 or 1N4150W-V-GS08 A4 Tape and reel Absolute Maximum Ratings Tamb = 25 °C, unless otherwise specified Symbol Value Unit Peak reverse voltage Parameter VRM 50 V Maximum average forward rectified current IF(AV) 200 mA Maximum power dissipation Ptot 4101) mW Unit 1) Test condition Valid provided that electrodes are kept at ambient temperature. Thermal Characteristics Tamb = 25 °C, unless otherwise specified Symbol Value Maximum junction temperature Parameter Tj 150 °C Storage temperature range TS - 65 to + 150 °C Document Number 85720 Rev. 1.3, 17-Aug-10 Test condition For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 1 1N4150W-V Vishay Semiconductors Electrical Characteristics Tamb = 25 °C, unless otherwise specified Parameter Forward voltage drop Reverse current Reverse recovery time Test condition Symbol Max. Unit IF = 200 mA VF Min. Typ. 1 V VR = 50 V IR 100 nA IF = IR = ( 10 to 200) mA to Irr = 0.1IF trr 4 ns 0.10 (0.004) 0.15 (0.006) 8° 0.45 (0.018) 0.25 (0.010) 0° to 0.2 (0.008) 1 (0.039) 1.35 (0.053) 0.1 (0.004) max. Package Dimensions in millimeters (inches): SOD-123 0.5 (0.020) ref. Cathode bar Mounting Pad Layout 2.85 (0.112) 2.55 (0.100) 0.85 (0.033) 2.5 (0.098) 0.85 (0.033) 3.55 (0.140) 1.40 (0.055) 3.85 (0.152) 1.7 (0.067) 0.45 (0.018) 0.65 (0.026) 0.85 (0.033) Rev. 4 - Date: 24. Sep. 2009 Document no.: S8-V-3910.01-001 (4) 17432 www.vishay.com 2 For technical questions within your region, please contact one of the following: Document Number 85720 [email protected], [email protected], [email protected] Rev. 1.3, 17-Aug-10 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000