DMS3016SSS NEW PRODUCT N-CHANNEL ENHANCEMENT MODE MOSFET WITH SCHOTTKY DIODE Features Mechanical Data • • • • • • DIOFET utilizes a unique patented process to monolithically integrate a MOSFET and a Schottky in a single die to deliver: • Low RDS(ON) - minimizes conduction losses • Low VSD - reducing the losses due to body diode conduction • Low Qrr - lower Qrr of the integrated Schottky reduces body diode switching losses • Low gate capacitance (Qg/Qgs) ratio – reduces risk of shootthrough or cross conduction currents at high frequencies • Avalanche rugged – IAR and EAR rated Lead Free, RoHS Compliant (Note 1) "Green" Device (Note 2) Qualified to AEC-Q101 Standards for High Reliability Top View • • • • • Case: SO-8 Case Material: Molded Plastic, “Green” Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminal Connections: See Diagram Below Marking Information: See Page 5 Ordering Information: See Page 5 Weight: 0.072 grams (approximate) S D S D S D G D Top View Internal Schematic Maximum Ratings @TA = 25°C unless otherwise specified Characteristic Symbol VDSS VGSS Drain-Source Voltage Gate-Source Voltage Continuous Drain Current (Note 3) VGS = 4.5V Steady State TA = 25°C TA = 85°C Pulsed Drain Current (Note 4) Avalanche Current (Note 4) (Note 5) Repetitive Avalanche Energy (Note 4) (Note 5) L = 0.3mH Unit V V EAR Value 30 ±12 9.8 6.3 90 13 25.4 Symbol PD RθJA TJ, TSTG Value 1.54 81 -55 to +150 Unit W °C/W °C ID IDM IAR A A A mJ Thermal Characteristics Characteristic Power Dissipation (Note 3) Thermal Resistance, Junction to Ambient @TA = 25°C (Note 3) Operating and Storage Temperature Range Notes: 1. No purposefully added lead. 2. Diodes Inc.'s "Green" policy can be found on our website at http://www.diodes.com/products/lead_free/index.php. 3. Device mounted on minimum recommended layout. The value in any given application depends on the user’s specific board design. 4. Repetitive rating, pulse width limited by junction temperature. 5. IAR and EAR rating are based on low frequency and duty cycles to keep TJ = 25°C DMS3016SSS Document number: DS32266 Rev. 3 - 2 1 of 6 www.diodes.com September 2010 © Diodes Incorporated DMS3016SSS Characteristic OFF CHARACTERISTICS (Note 6) Drain-Source Breakdown Voltage Zero Gate Voltage Drain Current Gate-Source Leakage ON CHARACTERISTICS (Note 6) Gate Threshold Voltage Symbol Min Typ Max Unit BVDSS IDSS IGSS 30 - - 0.1 ±100 V mA nA VGS = 0V, ID = 250μA VDS = 30V, VGS = 0V VGS = ±12V, VDS = 0V VGS(th) RDS (ON) |Yfs| VSD IS 9 11 5 0.4 - 2.3 13 16 1 5 V Static Drain-Source On-Resistance 1.0 - VDS = VGS, ID = 250μA VGS = 10V, ID = 9.8A VGS = 4.5V, ID = 9.8A VDS = 5V, ID = 9.8A VGS = 0V, IS = 1A - Ciss Coss Crss Rg Qg Qg Qgs Qgd tD(on) tr tD(off) tf 0.53 - 1849 158 123 2.68 18.5 43 4.7 4.0 6.62 8.73 36.41 4.69 4.82 - Forward Transfer Admittance Diode Forward Voltage Maximum Body-Diode + Schottky Continuous Current DYNAMIC CHARACTERISTICS (Note 7) Input Capacitance Output Capacitance Reverse Transfer Capacitance Gate Resistance Total Gate Charge VGS = 4.5V Total Gate Charge VGS = 10V Gate-Source Charge Gate-Drain Charge Turn-On Delay Time Turn-On Rise Time Turn-Off Delay Time Turn-Off Fall Time Notes: mΩ S V A pF pF pF Ω nC nC nC nC ns ns ns ns Test Condition VDS =15V, VGS = 0V, f = 1.0MHz VDS =0V, VGS = 0V, f = 1MHz VDS = 15V, VGS = 10V, ID = 9.8A VGS = 10V, VDS = 10V, RG = 3Ω, RL = 1.2Ω 6. Short duration pulse test used to minimize self-heating effect. 7. Guaranteed by design. Not subject to production testing. 30 30 VGS = 4.5V 25 VGS = 4.0V 25 VGS = 3.5V 20 ID , DRAIN CURRENT (A) ID, DRAIN CURRENT (A) NEW PRODUCT Electrical Characteristics @ TA = 25°C unless otherwise stated VGS = 3.0V 15 VGS = 2.5V 10 VDS = 5V 20 15 VGS = 150°C 10 VGS = 125°C VGS = 85°C 5 5 VGS = 25°C VGS = 2.0V 0 VGS = 2.2V VGS = -55°C 0 0 0.5 1 1.5 VDS, DRAIN-SOURCE VOLTAGE (V) Fig. 1 Typical Output Characteristic DMS3016SSS Document number: DS32266 Rev. 3 - 2 2 0 2 of 6 www.diodes.com 0.5 1 1.5 2 2.5 VGS, GATE-SOURCE VOLTAGE (V) Fig. 2 Typical Transfer Characteristic 3 September 2010 © Diodes Incorporated 0.03 VGS = 2.5V 0.02 VGS = 4.5V 0.01 VGS = 10V 0 0 5 10 15 20 25 ID, DRAIN-SOURCE CURRENT (A) Fig. 3 Typical On-Resistance vs. Drain Current and Gate Voltage RDSON, DRAIN-SOURCE ON-RESISTANCE (NORMALIZED) VGS = 4.5V 0.03 1.4 VGS = 10V ID = 20A 1.2 1.0 0.8 TA = 125°C TA = 85°C TA = 25°C 0.01 TA = -55°C 0 0 5 10 15 20 25 ID, DRAIN CURRENT (A) Fig. 4 Typical On-Resistance vs. Drain Current and Temperature 30 0.03 0.02 VGS = 4.5V ID = 10A 0.01 -25 0 25 50 75 100 125 150 TA, AMBIENT TEMPERATURE (°C) VGS = 10V ID = 20A 0 -50 -25 0 25 50 75 100 125 150 TA, AMBIENT TEMPERATURE (°C) Fig. 6 On-Resistance Variation with Temperature Fig. 5 On-Resistance Variation with Temperature 20 3.0 2.5 ID = 100mA 1.0 0.5 0 -50 -25 0 25 50 75 100 125 150 TA, AMBIENT TEMPERATURE (°C) Fig. 7 Gate Threshold Variation vs. Ambient Temperature DMS3016SSS Document number: DS32266 Rev. 3 - 2 IS, SOURCE CURRENT (A) 16 2.0 1.5 TA = 150°C 0.02 30 VGS = 4.5V ID = 10A 0.6 -50 0.04 RDS(ON), DRAIN-SOURCE ON-RESISTANCE (Ω) 0.04 RDSON, DRAIN-SOURCE ON-RESISTANCE (Ω) RDS(ON), DRAIN-SOURCE ON-RESISTANCE (Ω) 0.05 1.6 VGS(TH), GATE THRESHOLD VOLTAGE (V) NEW PRODUCT DMS3016SSS TA = 25°C 12 8 4 0 0 3 of 6 www.diodes.com 0.2 0.4 0.6 0.8 1.0 VSD, SOURCE-DRAIN VOLTAGE (V) Fig. 8 Diode Forward Voltage vs. Current 1.2 September 2010 © Diodes Incorporated DMS3016SSS 10,000 10,000 f = 1MHz IDSS, LEAKAGE CURRENT (µA) C, CAPACITANCE (pF) Ciss 1,000 Coss Crss 100 10 1,000 TA = 85°C 100 10 TA = 25°C 1 0 5 10 15 20 25 VDS, DRAIN-SOURCE VOLTAGE (V) Fig. 9 Typical Total Capacitance 0 30 10 20 VDS, DRAIN-SOURCE VOLTAGE (V) Fig. 10 Typical Leakage Current vs. Drain-Source Voltage 30 10 VGS, GATE-SOURCE VOLTAGE (V) VDS = 15V ID = 12.7A 8 6 4 2 0 0 5 10 15 20 25 30 35 40 Qg, TOTAL GATE CHARGE (nC) Fig. 11 Gate-Charge Characteristics 45 1 r(t), TRANSIENT THERMAL RESISTANCE NEW PRODUCT T A = 125°C D = 0.7 D = 0.5 D = 0.3 0.1 D = 0.1 D = 0.9 D = 0.05 R θJA(t) = r(t) * RθJA R θJA = 80°C/W D = 0.02 0.01 P(pk) D = 0.01 t2 TJ - TA = P * RθJA(t) Duty Cycle, D = t 1/t2 D = 0.005 D = Single Pulse 0.001 0.0001 DMS3016SSS Document number: DS32266 Rev. 3 - 2 0.001 t1 0.01 0.1 1 t1, PULSE DURATION TIME (s) Fig. 12 Transient Thermal Response 4 of 6 www.diodes.com 10 100 1,000 September 2010 © Diodes Incorporated DMS3016SSS Ordering Information (Note 8) Part Number DMS3016SSS-13 Packaging 2500 / Tape & Reel 8. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information 8 5 Logo S3016SS Part no. YY WW 1 4 Xth week: 01 ~ 53 Year: “09” = 2009 Year: “10” = 2010 Package Outline Dimensions 0.254 NEW PRODUCT Notes: Case SO-8 E1 E A1 L Gauge Plane Seating Plane Detail ‘A’ 7°~9° h 45° Detail ‘A’ A2 A A3 b e D SO-8 Dim Min Max A 1.75 A1 0.10 0.20 A2 1.30 1.50 A3 0.15 0.25 b 0.3 0.5 D 4.85 4.95 E 5.90 6.10 E1 3.85 3.95 e 1.27 Typ h 0.35 L 0.62 0.82 0° 8° θ All Dimensions in mm Suggested Pad Layout X C1 C2 Dimensions X Y C1 C2 Value (in mm) 0.60 1.55 5.4 1.27 Y DMS3016SSS Document number: DS32266 Rev. 3 - 2 5 of 6 www.diodes.com September 2010 © Diodes Incorporated DMS3016SSS IMPORTANT NOTICE NEW PRODUCT DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2010, Diodes Incorporated www.diodes.com DMS3016SSS Document number: DS32266 Rev. 3 - 2 6 of 6 www.diodes.com September 2010 © Diodes Incorporated