NTHS4101P Power MOSFET −20 V, 6.7 A, P−Channel ChipFET Features • Offers an Ultra Low RDS(on) Solution in the ChipFET Package • Miniature ChipFET Package 40% Smaller Footprint than TSOP−6 • • • • • making it an Ideal Device for Applications where Board Space is at a Premium Low Profile (<1.1 mm) Allows it to Fit Easily into Extremely Thin Environments such as Portable Electronics Designed to Provide Low RDS(on) at Gate Voltage as Low as 1.8 V, the Operating Voltage used in many Logic ICs in Portable Electronics Simplifies Circuit Design since Additional Boost Circuits for Gate Voltages are not Required Operated at Standard Logic Level Gate Drive, Facilitating Future Migration to Lower Levels using the same Basic Topology Pb−Free Package is Available http://onsemi.com V(BR)DSS RDS(on) TYP ID MAX 21 m @ −4.5 V −20 V −6.7 A 30 m @ −2.5 V 42 m @ −1.8 V S G Applications • Optimized for Battery and Load Management Applications in • • D Portable Equipment such as MP3 Players, Cell Phones, Digital Cameras, Personal Digital Assistant and other Portable Applications Charge Control in Battery Chargers Buck and Boost Converters P−Channel MOSFET ChipFET CASE 1206A STYLE 1 MAXIMUM RATINGS (TJ = 25°C unless otherwise noted) Rating Value Unit Drain−to−Source Voltage VDSS −20 Vdc Gate−to−Source Voltage − Continuous VGS 8.0 Vdc Drain Current − Continuous − 5 seconds ID ID −4.8 −6.7 A Total Power Dissipation Continuous @ TA = 25°C (5 sec) @ TA = 25°C Continuous @ 85°C (5 sec) @ 85°C PD Continuous Source Current Is −4.8 RJA RJA 50 95 TL 260 Thermal Resistance (Note 1) Junction−to−Ambient, 5 sec Junction−to−Ambient, Continuous Maximum Lead Temperature for Soldering Purposes, 1/8″ from case for 10 seconds October, 2004 − Rev. 1 D 8 1 D 1 8 D 7 2 D 2 7 D 6 3 D 3 S 5 4 G 4 W 1.3 2.5 0.7 1.3 A 6 5 C6 = Specific Device Code M = Month Code °C/W ORDERING INFORMATION °C Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. Surface Mounted on FR4 Board using 1 in sq pad size (Cu area = 1.27 in sq [1 oz] including traces). Semiconductor Components Industries, LLC, 2004 MARKING DIAGRAM PIN CONNECTIONS C6 M Symbol 1 Package Shipping† NTHS4101PT1 ChipFET 3000 Tape / Reel NTHS4101PT1G ChipFET (Pb−free) 3000 Tape / Reel Device †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. Publication Order Number: NTHS4101P/D NTHS4101P ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise noted) Symbol Test Condition Min V(Br)DSS VGS = 0 Vdc, ID = −250 Adc −20 Gate−Body Leakage Current Zero IGSS VDS = 0 Vdc, VGS = 8.0 Vdc 100 nAdc Zero Gate Voltage Drain Current IDSS VDS = −16 Vdc, VGS = 0 Vdc VDS = −16 Vdc, VGS = 0 Vdc, TJ = 85°C −1.0 −5.0 Adc Gate Threshold Voltage VGS(th) VDS = VGS, ID = −250 Adc −1.5 Vdc Static Drain−to−Source On−Resistance RDS(on) VGS = −4.5 Vdc, ID = −4.8 Adc VGS = −2.5 Vdc, ID = −4.2 Adc VGS = −1.8 Vdc, ID = −1.0 Adc 21 30 42 34 40 52 m Forward Transconductance gFS VDS = −5.0 Vdc, ID = −4.8 Adc 15 Diode Forward Voltage VSD IS = −4.8 Adc, VGS = 0 Vdc −0.8 Input Capacitance Ciss 2100 Output Capacitance Coss VDS = −16 Vdc VGS = 0 V f = 1.0 1 0 MHz Transfer Capacitance Crss Characteristic Typ Max Unit OFF CHARACTERISTICS Drain−to−Source Breakdown Voltage (Note 2) Temperature Coefficient (Positive) Vdc ON CHARACTERISTICS (Note 2) −0.45 S −1.2 V DYNAMIC CHARACTERISTICS pF 290 200 SWITCHING CHARACTERISTICS (Note 3) Turn−On Delay Time Rise Time Turn−Off Delay Time Fall Time Gate Charge td(on) VDD = −16 Vdc 8.0 tr VGS = −4.5 Vdc 28 td(off) ID = −4.5 Adc 75 tf RG = 2.5 60 Qg VGS = −4.5 Vdc 25 Qgs ID = −4.5 Adc 4.0 Qgd VDS = −16 Vdc (Note 3) 7.0 2. Pulse Test: Pulse Width = 250 s, Duty Cycle = 2%. 3. Switching characteristics are independent of operating junction temperatures. http://onsemi.com 2 ns 35 nC NTHS4101P TYPICAL PERFORMANCE CURVES (TJ = 25°C unless otherwise noted) −1.8 V 8 7 6 5 −1.6 V 4 3 2 −1.4 V 1 1 0 2 3 4 5 9 8 7 6 5 4 125°C 3 25°C 2 TJ = −55°C 1 −1.2 V 0 0 7 6 8 −VDS, DRAIN−TO−SOURCE VOLTAGE (VOLTS) 0.5 2.5 1 1.5 2 −VGS, GATE−TO−SOURCE VOLTAGE (VOLTS) Figure 1. On−Region Characteristics Figure 2. Transfer Characteristics 0 3 1.5 0.1 VGS = −4.5 V RDS(on), DRAIN−TO−SOURCE RESISTANCE (NORMALIZED) VGS = −1.8 V 0.08 0.06 0.04 VGS = −2.5 V 0.02 VGS = −4.5 V 2 4 8 10 12 −ID, DRAIN CURRENT (AMPS) 6 14 1.3 1.1 0.9 0.7 0.5 −50 0 16 −25 0 25 75 100 125 Figure 4. On−Resistance Variation with Temperature 10000 VGS = 0 V TJ = 125°C 1000 TJ = 100°C 100 10 TJ = 25°C 1 0.1 0 50 TJ, JUNCTION TEMPERATURE (°C) Figure 3. On−Resistance vs. Drain Current and Gate Voltage −IDSS, LEAKAGE (nA) RDS(on), DRAIN−TO−SOURCE RESISTANCE () 10 TJ = 25°C VGS = −10 V to −2.4 V 9 −ID, DRAIN CURRENT (AMPS) −ID, DRAIN CURRENT (AMPS) 10 2 4 6 −VDS, DRAIN−TO−SOURCE VOLTAGE (VOLTS) Figure 5. Drain−to−Source Leakage Current vs. Voltage http://onsemi.com 3 8 150 NTHS4101P 5000 VDS = 0 V C, CAPACITANCE (pF) 4500 VGS = 0 V −VGS, GATE−TO−SOURCE VOLTAGE (VOLTS) TYPICAL PERFORMANCE CURVES (TJ = 25°C unless otherwise noted) TJ = 25°C 4000 3500 3000 2500 Ciss Crss 2000 1500 1000 Coss 500 0 −6 −4 −2 0 2 −VGS −VDS 4 8 6 10 12 14 16 18 20 GATE−TO−SOURCE OR DRAIN−TO−SOURCE VOLTAGE (VOLTS) QT 4 3 2 Q2 Q1 1 ID = −4.5 A TJ = 25°C 0 0 21 15 18 6 9 12 Qg, TOTAL GATE CHARGE (nC) 3 24 27 Figure 7. Gate−to−Source and Drain−to−Source Voltage vs. Total Gate Charge Figure 6. Capacitance Variation 1000 5 100 −IS, SOURCE CURRENT (AMPS) VDD = −16 V ID = −4.5 A VGS = −4.5 V td(off) tf tr 10 td(on) 1 1 10 VGS = 0 V TJ = 25°C 4 3 2 1 0 0.4 100 RG, GATE RESISTANCE (OHMS) 0.5 0.6 10 0.1 0.01 0.1 0.8 0.9 1.0 Figure 9. Diode Forward Voltage vs. Current 100 1 0.7 −VSD, SOURCE−TO−DRAIN VOLTAGE (VOLTS) Figure 8. Resistive Switching Time Variation vs. Gate Resistance −I D, DRAIN CURRENT (AMPS) t, TIME (ns) 5 10 s 100 s 1 ms VGS = −8 V SINGLE PULSE TC = 25°C RDS(on) LIMIT THERMAL LIMIT PACKAGE LIMIT dc 10 1 −VDS, DRAIN−TO−SOURCE VOLTAGE (VOLTS) Figure 10. Maximum Rated Forward Biased Safe Operating Area http://onsemi.com 4 100 NTHS4101P PACKAGE DIMENSIONS ChipFET CASE 1206A−03 ISSUE E A 8 M 7 6 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. MOLD GATE BURRS SHALL NOT EXCEED 0.13 MM PER SIDE. 4. LEADFRAME TO MOLDED BODY OFFSET IN HORIZONTAL AND VERTICAL SHALL NOT EXCEED 0.08 MM. 5. DIMENSIONS A AND B EXCLUSIVE OF MOLD GATE BURRS. 6. NO MOLD FLASH ALLOWED ON THE TOP AND BOTTOM LEAD SURFACE. 7. 1206A−01 AND 1206A−02 OBSOLETE. NEW STANDARD IS 1206A−03. K 5 S 5 6 7 8 4 3 2 1 B 1 2 3 4 L D J G C 0.05 (0.002) STYLE 1: PIN 1. 2. 3. 4. 5. 6. 7. 8. DIM A B C D G J K L M S DRAIN DRAIN DRAIN GATE SOURCE DRAIN DRAIN DRAIN MILLIMETERS MIN MAX 2.95 3.10 1.55 1.70 1.00 1.10 0.25 0.35 0.65 BSC 0.10 0.20 0.28 0.42 0.55 BSC 5 ° NOM 1.80 2.00 INCHES MIN MAX 0.116 0.122 0.061 0.067 0.039 0.043 0.010 0.014 0.025 BSC 0.004 0.008 0.011 0.017 0.022 BSC 5 ° NOM 0.072 0.080 SOLDERING FOOTPRINTS* 2.032 0.08 2.032 0.08 0.457 0.018 0.635 0.025 1.727 0.068 0.457 0.018 0.711 0.028 0.66 0.026 SCALE 20:1 0.178 0.007 0.711 0.028 mm inches 0.66 0.026 Basic Style 1 *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. http://onsemi.com 5 mm inches NTHS4101P ChipFET is a trademark of Vishay Siliconix. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 61312, Phoenix, Arizona 85082−1312 USA Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder Japan: ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Phone: 81−3−5773−3850 http://onsemi.com 6 For additional information, please contact your local Sales Representative. NTHS4101P/D