BR1000 - BR1010 SILICON BRIDGE RECTIFIERS PRV : 50 - 1000 Volts Io : 10 Amperes BR10 0.520 (13.20) 0.480 (12.20) 0.158 (4.00) 0.142 (3.60) FEATURES : * * * * * * High current capability High surge current capability High reliability Low reverse current Low forward voltage drop Ideal for printed circuit board AC 0.77 (19.56) 0.73 (18.54) 0.290 (7.36) 0.210 (5.33) AC 0.052 (1.32) 0.048 (1.22) MECHANICAL DATA : * Case : Reliable low cost construction utilizing molded plastic technique * Epoxy : UL94V-O rate flame retardant * Lead : Axial lead solderable per MIL - STD 202 , Method 208 guaranteed * Polarity : Polarity symbols marked on case * Mounting position : Any * Weight : 6.1 grams 0.75 (19.1) Min. 0.30 (7.62) 0.25 (6.35) Dimensions in inches and ( millimeters ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherw ise specified. Single phase, half w ave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. RATING SYMBOL BR1000 BR1001 BR1002 BR1004 BR1006 BR1008 BR1010 UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Volts Maximum Average Forw ard Current Tc=55°C IF(AV) 10 Amp. IFSM 300 Amp. Current Squared Time at t < 8.3 ms. I2t 160 A2S Maximum Forw ard Voltage per Diode at IF = 5 Amp. VF 1.0 Volts IR 10 µA IR(H) 200 µA RθJC 2.5 °C/W TJ - 40 to + 150 °C TSTG - 40 to + 150 °C Peak Forw ard Surge Current Single half sine w ave Superimposed on rated load (JEDEC Method) Maximum DC Reverse Current Ta = 25 °C at Rated DC Blocking Voltage Ta = 100 °C Typical Thermal Resistance (Note 1) Operating Junction Temperature Range Storage Temperature Range Notes : 1. Thermal Resistance from junction to case w ith units mounted on a 3.2" x 3.2" x 0.12" (8.2cm.x 8.2cm.x 0.3cm.) Al.-Finned Plate. UPDATE : APRIL 23, 1998 FIG.1 - DERATING CURVE FOR OUTPUT RECTIFIED CURRENT FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD OUTPUT CURRENT AMPERES RATING AND CHARACTERISTIC CURVES ( BR1000 - BR1010 ) 12 10 8 6 4 HEAT-SINK MOUNTING, Tc 3.2" x 3.2" x 0.12" THK. (8.2cm x8.2cm x 0.3cm) Al.-PLATE 2 0 300 250 TJ = 50 °C 200 150 100 8.3 ms SINGLE HALF SINE WAVE JEDEC METHOD 50 0 0 25 50 75 100 125 150 175 1 CASE TEMPERATURE, ( °C) PER DIODE 100 Pulse Width = 300 µs 1 % Duty Cycle 10 1.0 TJ = 25 °C 0.1 REVERSE CURRENT, MICROAMPERES FIG.3 - TYPICAL FORWARD CHARACTERISTICS FORWARD CURRENT, AMPERES 2 4 6 10 20 40 60 100 NUMBER OF CYCLES AT 60Hz FIG.4 - TYPICAL REVERSE CHARACTERISTICS PER DIODE 10 TJ = 100 °C 1.0 0.1 0.01 0 TJ = 25 °C 20 40 60 80 100 120 PERCENT OF RATED REVERSE VOLTAGE, (%) 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 FORWARD VOLTAGE, VOLTS 1.8 140