Ordering number:ENN6404 PNP Epitaxial Planar Silicon Transistor 2SA2025 DC/DC Converter Applications Applications Package Dimensions · Relay drivers, lamp drivers, motor drivers, strobes. unit:mm 2033A Features [2SA2025] · Adoption of MBIT processes. · Large current capacitance. · Low collector-to-emitter saturation voltage. · High-speed switching. · Ultrasmall-sized package permitting applied sets to be made small and slim. · High allowable power dissipation. 2.2 3.0 4.0 15.0 0.6 1.8 0.4 0.5 0.4 0.4 3 1 : Emitter 2 : Collector 3 : Base SANYO : SPA 1.3 0.7 0.7 1 2 1.3 3.0 3.8nom Specifications Absolute Maximum Ratings at Ta = 25˚C Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage VCBO –15 V Collector-to-Emitter Voltage VCEO VEBO –12 V –5 V IC –3 A ICP –5 Emitter-to-Base Voltage Collector Current Collector Current (Pulse) A Base Current IB –600 mA Collector Dissipation PC 0.55 W Junction Temperature Tj 150 ˚C Storage Temperature Tstg –55 to +150 ˚C Electrical Characteristics at Ta = 25˚C Parameter Symbol Conditions Ratings min typ max Unit Collector Cutoff Current ICBO VCB=–12V, IE=0 –0.1 µA Emitter Cutoff Current IEBO VEB=–4V, IC=0 –0.1 µA DC Current Gain Gain-Bandwidth Product hFE fT VCE=–2V, IC=–500mA VCE=–2V, IC=–500mA Output Capacitance Cob VCB=–10V, f=1MHz Collector-to-Emitter Saturation Voltage VCE(sat) IC=–1.5A, IB=–30mA Base-to-Emitter Saturation Voltage VBE(sat) IC=–1.5A, IB=–30mA 200 560 280 MHz 36 pF –110 –165 mV –0.85 –1.2 V Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 21000TS (KOTO) TA-2707 No.6404–1/4 2SA2025 Continued on preceding page. Parameter Symbol Collector-to-Base Breakdown Voltage Ratings Conditions min V(BR)CBO IC=–10µA, IE=0 V(BR)CEO IC=–1mA, RBE=∞ Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time V(BR)EBO ton Storage Time Fall Time typ Unit max –15 V –12 V IE=–10µA, IC=0 –5 V See specified Test Circuit 30 ns tstg See specified Test Circuit 90 ns tf See specified Test Circuit 10 ns Switching Time Test Circuit IB1 PW=20µs D.C.≤1% IB2 OUTPUT INPUT 1kΩ VR RL + + 50Ω 220µF VBE=5V 470µF VCC=--5V --20IB1= 20IB2= IC=--1.5A IC -- VCE --2.0 --14mA --12mA --8mA --1.2 --6mA --1.0 --4mA --0.8 --0.6 --2mA --0.4 Collector Current, IC – A --1.4 --0.8mA --180 --10mA --16 m Collector Current, IC – A A --1.8 --1.6 IC -- VCE --200 --0.7mA --160 --0.6mA --140 --0.5mA --120 --100 --0.4mA --80 --0.3mA --60 --0.2mA --40 --0.1mA --20 --0.2 IB=0 0 0 --0.2 --0.4 --0.6 --0.8 Collector-to-Emitter Voltage, VCE – V --2 --3 --4 Collector-to-Emitter Voltage, VCE – V VCE=--2V 7 5 --3.0 --5 IT01710 hFE -- IC 1000 VCE=--2V 3 2 --2.5 DC Current Gain, hFE Collector Current, IC – A --1 IT01709 IC -- VBE --3.5 IB=0 0 0 --1.0 --2.0 --1.5 --1.0 100 7 5 3 2 10 7 5 3 --0.5 2 0 0 --0.2 --0.4 --0.6 --0.8 Base-to-Emitter Voltage, VBE – V --1.0 --1.2 IT01711 1.0 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 Collector Current, IC – A 2 3 5 7 --10 IT01712 No.6404–2/4 2SA2025 VCE(sat) -- IC 5 2 --0.1 7 5 3 2 --0.01 7 5 3 2 --0.001 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 Collector Current, IC – A 3 5 3 2 --1.0 7 5 3 2 --0.1 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 Collector Current, IC – A 3 3 2 Collector Current, IC – A 5 3 5 7 --1.0 2 3 5 IT01717 3 5 IT01714 f=1MHz 10 7 5 3 2 2 3 5 7 --1.0 2 3 5 7 --10 2 Collector-to-Base Voltage, VCB -- V 3 5 IT01716 ASO ICP=--5A IC=--3A 3 2 10 0m s --1.0 7 5 DC op era tio 3 2 n --0.1 7 5 --0.01 3 2 3 2 10 2 7 --1.0 100 7 5 3 2 7 --0.1 5 3 2 2 5 3 s 7 2 s 0µ 100 Collector Current, IC – A 7 --0.1 Collector Current, IC – A 1m 2 3 5 50 3 2 3 Cob -- VCB --10 7 5 5 7 --0.01 2 IT01715 VCE=--2V 7 5 1.0 --0.1 5 f T -- IC 1000 7 --0.01 --0.01 Output Capacitance, Cob – pF 5 Gain-Bandwidth Product, fT – MHz --0.1 1000 7 5 IC / IB=50 7 2 IT01713 VBE(sat) -- IC --10 Base-to-Emitter Saturation Voltage, VBE (sat) – V IC / IB=50 3 Collector-to-Emitter Saturation Voltage, VCE (sat) – V Collector-to-Emitter Saturation Voltage, VCE (sat) – V 3 VCE(sat) -- IC 5 IC / IB=20 Ta=25°C Single pulse 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 2 IT01718 Collector-to-Emitter Voltage, VCE – V PC -- Ta 0.8 Collector Dissipation, PC – W 0.7 0.6 0.55 0.5 0.4 0.3 0.2 0.1 0 0 20 40 60 80 100 120 Ambient Temperature, Ta – ˚C 140 160 IT01719 No.6404–3/4 2SA2025 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of February, 2000. Specifications and information herein are subject to change without notice. PS No.6404–4/4