Ordering number : ENN7379 2SA2112 PNP Epitaxial Planar Silicon Transistors 2SA2112 High Current Switching Applications Applications • Package Dimensions DC-DC converter, relay drivers, lamp drivers, motor drivers, strobes. unit : mm 2064A [2SA2112] Features • 1.0 6.9 1.0 • Adoption of MBIT process. Large current capacitance. Low collector-to-emitter saturation voltage. High-speed switching. 4.5 • 2.5 1.45 1.0 • 4.0 1.0 0.6 0.5 0.9 1 2 3 0.45 1 : Emitter 2 : Collector 3 : Base Specifications 2.54 2.54 SANYO : NMP Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage VCBO --50 V Collector-to-Emitter Voltage VCES --50 V Collector-to-Emitter Voltage VCEO --50 V Emitter-to-Base Voltage VEBO --6 V IC --3 A Collector Current Collector Current (Pulse) Base Current ICP IB --6 Collector Dissipation PC 1 W Junction Temperature Tj 150 °C Storage Temperature Tstg --55 to +150 °C --600 A mA Electrical Characteristics at Ta=25°C Parameter Collector Cutoff Current Symbol ICBO IEBO Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product hFE fT Conditions VCB=--40V, IE=0 VEB=--4V, IC=0 VCE=--2V, IC=--100mA Ratings min typ 200 VCE=--10V, IC=--500mA Unit max --1 µA --1 µA 560 390 MHz Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN N2503 TS IM TA-3749 No.7379-1/4 2SA2112 Continued from preceding page. Parameter Symbol Output Capacitance Collector-to-Emitter Saturation Voltage Conditions Cob VCB=--10V, f=1MHz 24 IC=--1A, IB=--50mA IC=--2A, IB=--100mA --135 --270 mV --260 --700 mV --0.88 --1.2 V VBE(sat) Collector-to-Base Breakdown Voltage V(BR)CBO IC=--2A, IB=--100mA IC=--10µA, IE=0 Collector-to-Emitter Breakdown Voltage V(BR)CES V(BR)CEO IC=--100µA, RBE=0 IC=--1mA, RBE=∞ Emitter-to-Base Breakdown Voltage V(BR)EBO IE=--10µA, IC=0 See specified Test Circuit. Turn-ON Time ton tstg Storage Time Unit max VCE(sat)1 VCE(sat)2 Base-to-Emitter Saturation Voltage Ratings typ min Fall Time tf pF --50 V --50 V --50 V --6 V 30 ns See specified Test Circuit. 230 ns See specified Test Circuit. 18 ns Switching Time Test Circuit IB2 PW=20µs D.C.≤1% INPUT OUTPUT IB1 RB VR RL 50Ω + 470µF + 100µF VBE=5V VCC= --25V IC= --10IB1=10IB2= --1A IC -- VCE Collector Current, IC -- A A --30 m --20 --1.6 8mA -- 10mA -- --6mA --1.2 --4mA --0.8 --2mA --0.4 A mA --8m 0 --1 --6mA --5mA mA --1.6 2 --1 --4mA --1.2 --3mA --0.8 --2mA --1mA --0.4 IB=0 0 0 --0.2 --0.4 --0.6 --0.8 Collector-to-Emitter Voltage, VCE -- V --3.0 --14mA mA 0 --4 IC -- VCE --2.0 mA Collector Current, IC -- A --2.0 IB=0 0 --1.0 0 --4 --8 --12 --16 --20 Collector-to-Emitter Voltage, VCE -- V IT05441 IC -- VBE hFE -- IC 1000 VCE= --2V IT05442 VCE= --2V 7 DC Current Gain, hFE 5 --2.0 Ta=7 5°C 25°C --25°C Collector Current, IC -- A --2.5 --1.5 --1.0 Ta=75°C 25°C 3 --25°C 2 100 7 --0.5 5 0 0 --0.2 --0.4 --0.6 --0.8 --1.0 Base-to-Emitter Voltage, VBE -- V --1.2 IT05443 3 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 Collector Current, IC -- A 2 3 5 IT05444 No.7379-2/4 2SA2112 VCE(sat) -- IC --1.0 5 Collector-to-Emitter Saturation Voltage, VCE(sat) -- V Collector-to-Emitter Saturation Voltage, VCE(sat) -- V 7 3 2 --0.1 °C 25 5°C =7 C Ta 5° --2 7 5 3 VCE(sat) -- IC --10 7 5 IC / IB=20 2 IC / IB=50 3 2 --1.0 7 5 3 2 °C 25 C 75° Ta= °C --25 --0.1 7 5 3 2 --0.01 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 Collector Current, IC -- A 3 --0.01 --0.01 5 3 5 7 --0.1 2 3 5 7 --1.0 2 3 Collector Current, IC -- A VBE(sat) -- IC --10 2 IT05445 Cob -- VCB 100 IC / IB=50 5 IT05446 f=1MHz 5 3 2 25°C --1.0 Ta= --25°C 7 75°C 5 3 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 Collector Current, IC -- A 3 2 10 --1.0 5 --10 7 5 Collector Current, IC -- A 100 7 5 3 3 2 2 3 5 7 --0.1 2 3 5 7 --1.0 Collector Current, IC -- A 2 3 5 IT05449 PC -- Ta 1.2 2 --10 3 5 7 --100 IT05448 ASO ICP= --6A 10ms <10µs 1ms IC= --3A 50 Di ssi --1.0 7 5 DC 0µ s 10 0m s nL im i pa tio op t era 3 2 tio n S --0.1 7 5 3 2 2 7 µs 2 5 100 3 3 Collector-to-Base Voltage, VCB -- V 5 10 --0.01 2 IT05447 VCE= --10V 7 Gain-Bandwidth Product, fT -- MHz 3 5 fT -- IC 1000 Collector Dissipation, PC -- W 7 Output Capacitance, Cob -- pF Base-to-Emitter Saturation Voltage, VBE(sat) -- V 7 /B Li mi t Ta=25°C Single pulse --0.01 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 2 Collector-to-Emitter Voltage, VCE -- V 3 5 7 IT05450 1.0 0.8 0.6 0.4 0.2 0 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT05451 No.7379-3/4 2SA2112 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of November, 2003. Specifications and information herein are subject to change without notice. PS No.7379-4/4