Ordering number : ENN7225 CPH6122 PNP Epitaxial Planar Silicon Transistor CPH6122 DC / DC Converter Applications Applications Package Dimensions Relay drivers, lamp drivers, motor drivers, strobes. unit : mm 2146A Features • • 0.05 1 2 3 0.95 1 : Collector 2 : Collector 3 : Base 4 : Emitter 5 : Collector 6 : Collector 0.4 Specifications SANYO : CPH6 Absolute Maximum Ratings at Ta=25°C Parameter 0.2 0.6 4 0.7 0.9 • 5 6 2.8 • 0.15 1.6 • [CPH6122] 2.9 Adoption of MBIT process. High current capacitance. Low collector-to-emitter saturation voltage. High-speed switching. Ultrasmall package facilitates miniaturization in end products (mounting height : 0.9mm). High allowable power dissipation. 0.6 • 0.2 • Symbol Conditions Ratings Unit Collector-to-Base Voltage VCBO --30 V Collector-to-Emitter Voltage VCEO --30 V Emitter-to-Bass Voltage VEBO --5 V IC --3 A Collector Current Collector Current (Pulse) Bass Current ICP IB Collector Dissipation PC Junction Temperature TJ Storage Temperature Tstg --5 --600 Mounted on ceramic board (600mm2×0.8mm) A mA 1.3 W 150 °C --55 to +150 °C Electrical Characteristics at Ta=25°C Parameter Symbol Collector Cutoff Current ICBO IEBO Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product hFE fT Output Capacitance Cob Collector-to-Emitter Saturation Voltage VCE(sat) VCE(sat) Conditions Ratings min typ max VCB=--30V, IE=0 VEB=--4V, IC=0 VCE=--2V, IC=--500mA VCE=--10V, IC=--500mA VCB=--10V, f=1MHz IC=--1.5A, IB=--30mA IC=--1.5A, IB=--75mA 200 Unit --0.1 µA --0.1 µA 560 400 MHz 25 pF --180 --270 mV --120 --180 mV Marking : AW Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 72602 TS IM TA-100026 No.7225-1/4 CPH6122 Continued from preceding page. Parameter Symbol Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage VBE(sat) V(BR)CBO Collector-to-Emitter Breakdown Voltage V(BR)CEO Emitter-to-Bass Breakdown Voltage V(BR)EBO Turn-On Time Storage Time Ratings Conditions min IC=--1.5A, IB=--30mA IC=--10µA, IE=0 IC=--1mA, RBE=∞ typ Unit max --0.83 --1.2 V --30 V --30 V IE=--10µA, IC=0 See specified Test Circuit. --5 V ton tstg See specified Test Circuit. 270 ns tf See specified Test Circuit. 27 ns Fall Time 50 ns Switching Time Test Circuit IB1 PW=20µs D.C.≤1% INPUT OUTPUT IB2 RB VR 24Ω 50Ω + + 100µF 470µF VCC= --12V VBE=5V --20IB1=20IB2=IC= --500mA IC -- VCE --2.5 --6mA --1.2 --4mA --1.0 --0.8 --2mA --0.6 --0.4 --2.0 --1.5 C 25°C --25°C --8mA Collector Current, IC -- A --1.4 VCE= --2V --10mA Ta=75 ° A --3 --4 0 mA 0 --2 A --1.6 IC -- VBE --3.0 --50m Collector Current, IC -- A --1.8 0m mA --2.0 --1.0 --0.5 --0.2 IB=0 0 0 --0.1 --0.2 --0.3 --0.4 --0.5 --0.6 --0.7 --0.8 Collector-to-Emitter Voltage, VCE -- V 0 --1.0 Ta=75°C 3 25°C --25°C 2 100 7 5 3 2 2 3 5 7 --0.1 2 3 5 7 --1.0 Collector Current, IC -- A 2 3 5 7 --10 IT04556 --0.4 --0.6 --0.8 --1.0 IT04555 fT -- IC 5 Gain-Bandwidth Product, FT -- MHz 5 --0.2 Bass-to-Emitter Voltage, VBE -- V VCE= --2V 7 10 --0.01 0 IT04554 hFE -- IC 1000 DC Current Gain, hFE --0.9 VCE= --10V 3 2 100 7 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 Collector Current, IC -- A 2 3 5 IT04557 No.7225-2/4 CPH6122 Cob -- VCB Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV Output Capacitance, Cob -- pF 5 3 2 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 2 3 5 7 2 --10 Collector-to-Base Voltage, VCB -- V 7 5 3 2 C C 75° Ta= 5°C --2 3 2 --10 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 7 5 2 2 3 5 10 2 10 0m ms --1.0 7 5 DC s era 3 1.3 1.2 op tio 2 n --0.1 7 5 3 2 Tc=25°C Single pulse Mounted on a ceramic board(600mm2✕0.8mm) --0.01 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 2 Collector-to-Emitter Voltage, VCE -- V 7 --1.0 2 3 5 7 IT04559 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 Collector Current, IC -- A Collector Dissipation, PC -- W s 5 °C Ta= --25 25°C 75°C 7 <50µs s s 0µ 0µ 50 Collector Current, IC -- A 1m 3 IC / IB=50 5 7 IT04561 PC -- Ta 1.4 ICP= --5A IC= --3A 2 --1.0 10 3 7 --0.1 VBE(sat) -- IC ASO --10 7 5 = Ta 3 5 --0.01 5 7 --10 IT04560 Collector Current, IC -- A °C 75 C 5° --2 --100 2 --1000 7 5 2 Collector Current, IC -- A VCE(sat) -- IC --100 3 IT04558 IC / IB=50 25° 5 --10 --0.01 3 Base-to-Emitter Saturation Voltage, VBE(sat) -- V 3 2 IC / IB=20 7 7 10 --1.0 VCB(sat) -- IC --1000 f=1MHz 25 °C 100 M ou nt 1.0 ed on ac er 0.8 am ic bo ar 0.6 d( 60 0m m2 ✕ 0.4 0. 8m m ) 0.2 0 3 5 IT04562 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT04563 No.7225-3/4 CPH6122 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of July, 2002. Specifications and information herein are subject to change without notice. PS No.7225-4/4