CPH3114 / CPH3214 Ordering number : ENN6394A CPH3114 / CPH3214 PNP / NPN Epitaxial Planar Silicon Transistors DC / DC Converter Applications Applications • Relay drivers, lamp drivers, motor drivers, flash. Features • • • • • • Adoption of MBIT processes. Large current capacitance. Low collector-to-emitter saturation voltage. High-speed switching. Ultrasmall package facilitates miniaturization in end products (mounting height : 0.9mm). High allowable power dissipation. ( ) : CPH3114 Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Collector-to-Base Voltage Conditions Ratings Unit (--)15 Collector-to-Emitter Voltage VCBO VCEO (--)15 V Emitter-to-Base Voltage VEBO (--)5 V Collector Current IC ICP Collector Current (Pulse) Base Current Junction Temperature IB PC Tj Storage Temperature Tstg Collector Dissipation V (--)1.5 A (--)3 A (--)300 mA 0.9 mW 150 °C --55 to +150 °C Mounted on a ceramic board (600mm2✕0.8mm) Electrical Characteristics at Ta=25°C Parameter Symbol Conditions Ratings min typ max Unit Collector Cutoff Current ICBO VCB=(--)12V, IE=0 (--)0.1 μA Emitter Cutoff Current IEBO hFE VEB=(--)4V, IC=0 (--)0.1 μA DC Current Gain VCE=(--)2V, IC=(--)100mA 200 Marking : CPH3114 : AP, CPH3214 : CP 560 Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 62504 TS IM TB-00000306 / 70500 TS (KOTO) TA-2786 No.6394-1/5 CPH3114 / CPH3214 Continued from preceding page. Parameter Symbol Gain-Bandwideth Product fT Output Capacitance Ratings Conditions min typ VCE=(--)2V, IC=(--)300mA Cob VCB=(--)10V, f=1MHz Collector-to-Base Breakdown Voltage VBE(sat) V(BR)CBO Collector-to-Emitter Breakdown Voltage V(BR)CEO IC=(--)750mA, IB=(--)15mA IC=(--)10μA, IE=0 IC=(--)1mA, RBE=∞ Emitter-to-Base Breakdown Voltage Turn-ON Time V(BR)EBO ton IE=(--)10μA, IC=0 See specified test circuit. Storage Time tstg See specified test circuit. tf See specified test circuit. Package Dimensions unit : mm 2150A 200 (--320) mV 240 360 mV (--)0.85 (--)1.2 V (--)15 V (--)15 V V ns (90) ns 180 ns (15)20 ns IB1 IB2 (For PNP, the polarity is reversed.) OUTPUT 0.6 INPUT 0.05 2.8 1.6 mV 130 (50)40 RB VR 220μF 1 : Base 2 : Emitter 3 : Collector 0.7 0.9 0.2 1.9 RL + 50Ω 0.6 2 mV (--)5 PW=20μs DC≤1% 0.2 0.15 0.4 1 pF (--180) Switching Time Test Circuit 2.9 3 MHz (--210) VCE(sat) Fall Time MHz 450 (17)9 IC=(--)1.5mA, IB=(--)30mA Base-to-Emitter Saturation Voltage (350) (--120) IC=(--)750mA, IB=(--)15mA Collector-to-Emitter Saturation Voltage Unit max + 470μF VBE= --5V VCC=5V 20IB1= --20IB2= IC=750mA SANYO : CPH3 --1.2 --1.0 --6mA --0.8 --4mA --0.6 --2mA --0.4 mA 10mA 8mA mA 30 1.6 mA 20 1.4 6mA 40 --10mA --8mA 50m A 1.8 Collector Current, IC -- A --1.4 CPH3214 --3 0 --50 m A --1.6 IC -- VCE 2.0 --20mA mA --4 0 CPH3114 --1.8 Collector Current, IC -- A mA IC -- VCE --2.0 1.2 4mA 1.0 0.8 2mA 0.6 0.4 0.2 --0.2 IB=0 0 0 --0.1 --0.2 --0.3 --0.4 --0.5 --0.6 --0.7 --0.8 Collector-to-Emitter Voltage, VCE -- V --0.9 --1.0 IT01691 IB=0 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Collector-to-Emitter Voltage, VCE -- V 1.0 IT01692 No.6394-2/5 CPH3114 / CPH3214 IC -- VBE Collector Current, IC -- A --0.8 --0.7 --0.6 --0.5 --0.4 --0.2 --0.1 --0.2 --0.4 --0.6 --0.8 --1.0 Base-to-Emitter Voltage, VBE -- V 0.6 0.5 0.4 0.3 0.2 --1.2 0 25°C 5 DC Current Gain, hFE Ta=75 °C --25°C 100 7 5 7 5 2 7 --0.1 2 3 5 7 --1.0 Collector Current, IC -- A 2 10 0.01 3 5 2 100 7 5 3 2 7 --0.1 2 3 5 7 --1.0 Collector Current, IC -- A 2 3 5 2 100 7 5 3 2 2 3 5 7 0.1 2 3 5 10 7 5 3 2 7 1.0 Collector Current, IC -- A Output Capacitance, Cob -- pF 2 3 IT01696 3 2 3 IT01698 Cob -- VCB CPH3214 f=1MHz 7 3 2 1.0 CPH3214 VCE=2V 100 5 7 f T -- IC IT01697 CPH3114 f=1MHz 7 2 0.1 5 10 0.01 3 Cob -- VCB 100 7 7 3 5 5 Collector Current, IC -- A Gain-Bandwidth Product, f T -- MHz 7 3 3 1000 CPH3114 VCE= --2V 2 2 IT01695 f T -- IC 1000 --25°C 100 3 5 CPH3214 VCE=2V Ta=75°C 2 2 3 1.2 IT01694 3 3 2 1.0 7 2 1.0 --1.0 0.8 25°C 3 10 --0.01 0.6 hFE -- IC 1000 7 10 --0.01 0.4 Base-to-Emitter Voltage, VBE -- V CPH3114 VCE= --2V 5 0.2 IT01693 hFE -- IC 1000 DC Current Gain, hFE 0.7 0 0 Gain-Bandwidth Product, f T -- MHz 0.8 0.1 0 Output Capacitance, Cob -- pF CPH3214 VCE=2V 0.9 Ta=75 °C 25°C --25°C Collector Current, IC -- A --0.9 --0.3 IC -- VBE 1.0 CPH3114 VCE= --2V Ta=75°C 25°C --25°C --1.0 5 3 2 10 7 5 3 2 1.0 2 3 5 7 --10 Collector-to-Base Voltage, VCB -- V 2 3 IT01699 1.0 2 3 5 7 2 10 Collector-to-Base Voltage, VCB -- V 3 IT01700 No.6394-3/5 CPH3114 / CPH3214 VCE(sat) -- IC --1000 3 2 --100 7 °C 75 5°C --2 °C 25 Ta= 3 2 --10 7 5 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 Collector Current, IC -- A 2 75 °C C 25° 5 °C --25 Ta= --10 7 5 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 Collector Current, IC -- A Base-to-Emitter Saturation Voltage, VBE(sat) -- V 5 2 Ta= --25°C 7 75°C 25°C 3 2 --0.1 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 Collector Current, IC -- A 3 2 3 2 0.1 7 5 3 2 0.01 0.1 s era s s m s op 1m 10 0m s tio n Ta=25°C Single pulse Mounted on a ceramic board (600mm2✕0.8mm) For PNP, minus sign is omitted. 2 3 5 7 1.0 2 3 7 0.1 5 7 2 3 5 7 1.0 2 3 IT01702 CPH3214 IC / IB=50 5 3 2 100 °C 75 C 25° 7 5 °C --25 3 Ta= 2 10 2 3 5 7 0.1 2 3 5 7 1.0 2 3 IT01704 VBE(sat) -- IC CPH3214 IC / IB=50 5 3 2 25°C 1.0 Ta= --25°C 7 75°C 5 3 2 2 3 5 7 2 0.1 3 5 7 2 1.0 Collector Current, IC -- A 3 IT01706 PC -- Ta CPH3114 / CPH3214 0μ DC 5 1.2 0μ 10 3 1.4 10 1.0 7 5 2 VCE(sat) -- IC 0.1 0.01 3 CPH3114 / CPH3214 IC=1.5A °C Collector Current, IC -- A ASO ICP=3A 5 --2 10 IT01705 50 Collector Current, IC -- A 10 7 5 °C 7 3 5 75 Ta= 2 10 CPH3114 IC / IB=50 --1.0 3 IT01703 7 °C 5 7 5 0.01 3 VBE(sat) -- IC --10 25 7 7 3 2 100 1000 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 5 3 2 Collector Current, IC -- A Base-to-Emitter Saturation Voltage, VBE(sat) -- V Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 7 7 3 IT01701 CPH3114 IC / IB=50 --100 5 7 5 0.01 3 VCE(sat) -- IC --1000 CPH3214 IC / IB=20 7 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 5 Collector Dissipation, PC -- W Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 7 5 VCE(sat) -- IC 1000 CPH3114 IC / IB=20 10 Collector-to-Emitter Voltage, VCE -- V 1.0 0.9 Mo un 0.8 ted on ac era 0.6 mi cb 0.4 oa rd (60 0m m2 ✕0 .8m 0.2 m) 0 2 3 IT01707 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT01708 No.6394-4/5 CPH3114 / CPH3214 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of June, 2004. Specifications and information herein are subject to change without notice. PS No.6394-5/5